From fecb8865def541ff38f59ef3caf0cbd09f4fc9fd Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Sun, 30 Mar 2008 21:19:29 -0700 Subject: [PATCH] [MTD] [NOR] Read extended device ID from AMD/Spansion CFI flash chips AMD/Spansion use a device id of 0x7e to indicate an extended device is present at offset 0xe and 0xf in the query data. I've verified with Spansion that all their chips (mfr == 0x01) with an id of 0x7e use it to indicate an extended id is present. What's more, there are no chips with a NON-extended id that is the same as a different chip's extended id. In other words, when the extended ID is present, one can replace the normal id with the extended id without losing any information. Which is what I've done. Signed-off-by: Trent Piepho Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_probe.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c index b03d43ef91..a4463a91ce 100644 --- a/drivers/mtd/chips/cfi_probe.c +++ b/drivers/mtd/chips/cfi_probe.c @@ -232,6 +232,11 @@ static int __xipram cfi_chip_setup(struct map_info *map, cfi->mfr = cfi_read_query16(map, base); cfi->id = cfi_read_query16(map, base + ofs_factor); + /* Get AMD/Spansion extended JEDEC ID */ + if (cfi->mfr == CFI_MFR_AMD && (cfi->id & 0xff) == 0x7e) + cfi->id = cfi_read_query(map, base + 0xe * ofs_factor) << 8 | + cfi_read_query(map, base + 0xf * ofs_factor); + /* Put it back into Read Mode */ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); /* ... even if it's an Intel chip */ -- 2.39.5