From f8707ec9643769957065405b5090e4aa64fd8214 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sun, 12 Aug 2007 00:12:54 -0400 Subject: [PATCH] ACPI: thermal: create "thermal.act=" to disable or override active trip point thermal.act=-1 disables all active trip points in all ACPI thermal zones. thermal.act=C, where C > 0, overrides all lowest temperature active trip points in all thermal zones to C degrees Celsius. Raising this trip-point may allow you to keep your system silent up to a higher temperature. However, it will not allow you to raise the lowest temperature trip point above the next higher trip point (if there is one). Lowering this trip point may kick in the fan sooner. Note that overriding this trip-point will disable any BIOS attempts to implement hysteresis around the lowest temperature trip point. This may result in the fan starting and stopping frequently if temperature frequently crosses C. WARNING: raising trip points above the manufacturer's defaults may cause the system to run at higher temperature and shorten its life. Signed-off-by: Len Brown --- Documentation/kernel-parameters.txt | 4 ++++ drivers/acpi/thermal.c | 34 +++++++++++++++++++++++++---- 2 files changed, 34 insertions(+), 4 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4c7d2774d2..06db892b55 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1820,6 +1820,10 @@ and is between 256 and 4096 characters. It is defined in the file thash_entries= [KNL,NET] Set number of hash buckets for TCP connection + thermal.act= [HW,ACPI] + -1: disable all active trip points in all thermal zones + : override all lowest active trip points + thermal.nocrt= [HW,ACPI] Set to disable actions on ACPI thermal zone critical and hot trip points. diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 57d05ff44d..3521c37bbd 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -74,6 +74,10 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI Thermal Zone Driver"); MODULE_LICENSE("GPL"); +static int act; +module_param(act, int, 0644); +MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.\n"); + static int tzp; module_param(tzp, int, 0444); MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.\n"); @@ -405,11 +409,33 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz) char name[5] = { '_', 'A', 'C', ('0' + i), '\0' }; - status = - acpi_evaluate_integer(tz->device->handle, name, NULL, - &tz->trips.active[i].temperature); - if (ACPI_FAILURE(status)) + if (act == -1) + break; /* disable all active trip points */ + + status = acpi_evaluate_integer(tz->device->handle, + name, NULL, &tz->trips.active[i].temperature); + + if (ACPI_FAILURE(status)) { + if (i == 0) /* no active trip points */ + break; + if (act <= 0) /* no override requested */ + break; + if (i == 1) { /* 1 trip point */ + tz->trips.active[0].temperature = + CELSIUS_TO_KELVIN(act); + } else { /* multiple trips */ + /* + * Don't allow override higher than + * the next higher trip point + */ + tz->trips.active[i - 1].temperature = + (tz->trips.active[i - 2].temperature < + CELSIUS_TO_KELVIN(act) ? + tz->trips.active[i - 2].temperature : + CELSIUS_TO_KELVIN(act)); + } break; + } name[2] = 'L'; status = -- 2.39.5