From f7a8175f8875b61201e32c4922571e7a69a752ee Mon Sep 17 00:00:00 2001 From: Karel Zak Date: Mon, 9 Feb 2009 12:00:58 +0100 Subject: [PATCH] po: merge changes Signed-off-by: Karel Zak --- po/cs.po | 542 ++++++++++++++++++++++++++++++++++--------------- po/ja.po | 496 +++++++++++++++++++++++++++++++-------------- po/nl.po | 604 ++++++++++++++++++++++++++++++++++++++----------------- po/vi.po | 597 ++++++++++++++++++++++++++++++++++++++---------------- 4 files changed, 1571 insertions(+), 668 deletions(-) diff --git a/po/cs.po b/po/cs.po index 8007b289..20813d49 100644 --- a/po/cs.po +++ b/po/cs.po @@ -780,7 +780,8 @@ msgstr "mkfs (%s)\n" #: disk-utils/mkfs.cramfs.c:124 #, c-format msgid "" -"usage: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname outfile\n" +"usage: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname " +"outfile\n" " -h print this help\n" " -v be verbose\n" " -E make all warnings errors (non-zero exit status)\n" @@ -794,14 +795,16 @@ msgid "" " dirname root of the filesystem to be compressed\n" " outfile output file\n" msgstr "" -"Použití: %s [-h] [-v] [-b VELIKOST_BLOKU] [-e VERZE] [-i SOUBOR] [-n NÁZEV] NÁZEV_ADRESÁŘE VÝSTUPNÍ_SOUBOR\n" +"Použití: %s [-h] [-v] [-b VELIKOST_BLOKU] [-e VERZE] [-i SOUBOR] [-n NÁZEV] " +"NÁZEV_ADRESÁŘE VÝSTUPNÍ_SOUBOR\n" " -h vypíše tuto nápovědu\n" " -v upovídaný režim\n" " -E varování budou považována za chyby (nenulový návratový kód)\n" " -b VELIKOST_BLOKU\n" " použije tuto VELIKOST_BLOKU, musí být rovna velikosti stránky\n" " -e VERZE nastaví číslo verze (součást fsid)\n" -" -i SOUBOR vloží obraz ze SOUBORU do souborového systému (vyžaduje >= 2.4.0)\n" +" -i SOUBOR vloží obraz ze SOUBORU do souborového systému (vyžaduje >= " +"2.4.0)\n" " -n NÁZEV nastaví název souborového systému cramfs\n" " -p odsadí o %d bytů kvůli bootovacímu kódu\n" " -s setřídí položky v adresářích (stará volba, ignorováno)\n" @@ -837,8 +840,12 @@ msgstr "%6.2f%% (%+ld bytů)\t%s\n" #: disk-utils/mkfs.cramfs.c:829 #, c-format -msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB. We might die prematurely.\n" -msgstr "varování: požadovaná velikost (horní hranice) je odhadována na %lld MB, jenže největší velikost obrazu je %u MB. Můžeme zemřít předčasně.\n" +msgid "" +"warning: guestimate of required size (upper bound) is %lldMB, but maximum " +"image size is %uMB. We might die prematurely.\n" +msgstr "" +"varování: požadovaná velikost (horní hranice) je odhadována na %lld MB, " +"jenže největší velikost obrazu je %u MB. Můžeme zemřít předčasně.\n" #: disk-utils/mkfs.cramfs.c:856 msgid "ROM image map" @@ -872,7 +879,8 @@ msgstr "CRC: %x\n" #: disk-utils/mkfs.cramfs.c:901 #, c-format msgid "not enough space allocated for ROM image (%lld allocated, %zu used)\n" -msgstr "Pro obraz ROM nepřidělen dostatek prostoru (%lld přiděleno, %zu použito)\n" +msgstr "" +"Pro obraz ROM nepřidělen dostatek prostoru (%lld přiděleno, %zu použito)\n" #: disk-utils/mkfs.cramfs.c:909 msgid "ROM image" @@ -900,12 +908,14 @@ msgstr "varování: velikosti souboru zkráceny na %'lu MB (mínus 1 bajt).\n" #: disk-utils/mkfs.cramfs.c:933 #, c-format -msgid "warning: uids truncated to %u bits. (This may be a security concern.)\n" +msgid "" +"warning: uids truncated to %u bits. (This may be a security concern.)\n" msgstr "varování: UID zkrácena na %u bitů. (Může mít dopad na bezpečnost.)\n" #: disk-utils/mkfs.cramfs.c:938 #, c-format -msgid "warning: gids truncated to %u bits. (This may be a security concern.)\n" +msgid "" +"warning: gids truncated to %u bits. (This may be a security concern.)\n" msgstr "varování: GID zkrácena na %u bitů. (Může mít dopad na bezpečnost.)\n" #: disk-utils/mkfs.cramfs.c:943 @@ -914,7 +924,8 @@ msgid "" "WARNING: device numbers truncated to %u bits. This almost certainly means\n" "that some device files will be wrong.\n" msgstr "" -"VAROVÁNÍ: čísla zařízení zkrácena na %u bitů. Toto jistě znamená, že některé\n" +"VAROVÁNÍ: čísla zařízení zkrácena na %u bitů. Toto jistě znamená, že " +"některé\n" "soubory zařízení budou špatné.\n" #: disk-utils/mkfs.minix.c:160 @@ -1092,8 +1103,11 @@ msgstr "žádné UUID\n" #: disk-utils/mkswap.c:328 #, c-format -msgid "Usage: %s [-c] [-v0|-v1] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n" -msgstr "Použití: %s [-c] [-v0|-v1] [-pVELIKOST_STRÁNKY] [-L JMENOVKA] [-U UUID] ZAŘÍZENÍ [BLOKY]\n" +msgid "" +"Usage: %s [-c] [-v0|-v1] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n" +msgstr "" +"Použití: %s [-c] [-v0|-v1] [-pVELIKOST_STRÁNKY] [-L JMENOVKA] [-U UUID] " +"ZAŘÍZENÍ [BLOKY]\n" #: disk-utils/mkswap.c:351 msgid "too many bad pages" @@ -1353,12 +1367,17 @@ msgid "enlarged logical partitions overlap" msgstr "zvětšené logické diskové oddíly se vzájemně překrývají" #: fdisk/cfdisk.c:999 -msgid "!!!! Internal error creating logical drive with no extended partition !!!!" -msgstr "!!!! Vnitřní chyba při vytváření logického disku bez rozšířených diskových oddílů !!!!" +msgid "" +"!!!! Internal error creating logical drive with no extended partition !!!!" +msgstr "" +"!!!! Vnitřní chyba při vytváření logického disku bez rozšířených diskových " +"oddílů !!!!" #: fdisk/cfdisk.c:1010 fdisk/cfdisk.c:1022 -msgid "Cannot create logical drive here -- would create two extended partitions" -msgstr "Zde nelze vytvořit logický disk -- vznikly by dva rozšířené diskové oddíly" +msgid "" +"Cannot create logical drive here -- would create two extended partitions" +msgstr "" +"Zde nelze vytvořit logický disk -- vznikly by dva rozšířené diskové oddíly" #: fdisk/cfdisk.c:1164 msgid "Menu item too long. Menu may look odd." @@ -1463,8 +1482,11 @@ msgid "Opened disk read-only - you have no permission to write" msgstr "Disk byl otevřen pouze pro čtení - nemáte práva pro zápis" #: fdisk/cfdisk.c:1682 -msgid "Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted." -msgstr "Varování!! Detekována nepodporovaná GPT (GUID tabulka rozdělení disku). Použijte GNU Parted." +msgid "" +"Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted." +msgstr "" +"Varování!! Detekována nepodporovaná GPT (GUID tabulka rozdělení disku). " +"Použijte GNU Parted." #: fdisk/cfdisk.c:1699 msgid "Cannot get disk size" @@ -1483,8 +1505,10 @@ msgid "Warning!! This may destroy data on your disk!" msgstr "Varování!! Toto může vést ke zničení dat na Vašem disku!" #: fdisk/cfdisk.c:1874 -msgid "Are you sure you want to write the partition table to disk? (yes or no): " -msgstr "Jste si jist, že chcete uložit tabulku rozdělení disku na disk? (ano či ne): " +msgid "" +"Are you sure you want to write the partition table to disk? (yes or no): " +msgstr "" +"Jste si jist, že chcete uložit tabulku rozdělení disku na disk? (ano či ne): " #: fdisk/cfdisk.c:1880 msgid "no" @@ -1511,16 +1535,21 @@ msgid "Wrote partition table to disk" msgstr "Tabulka rozdělení disku byla uložena na disk" #: fdisk/cfdisk.c:1919 -msgid "Wrote partition table, but re-read table failed. Reboot to update table." -msgstr "Tabulka byla uložena, ale nepodařilo se ji znovu načíst. Restartujte systém." +msgid "" +"Wrote partition table, but re-read table failed. Reboot to update table." +msgstr "" +"Tabulka byla uložena, ale nepodařilo se ji znovu načíst. Restartujte systém." #: fdisk/cfdisk.c:1929 msgid "No primary partitions are marked bootable. DOS MBR cannot boot this." -msgstr "Žádný primární diskový oddíl není startovací. DOS MBR takto nenastartuje." +msgstr "" +"Žádný primární diskový oddíl není startovací. DOS MBR takto nenastartuje." #: fdisk/cfdisk.c:1931 -msgid "More than one primary partition is marked bootable. DOS MBR cannot boot this." -msgstr "Více než 1 primární diskový oddíl je startovací. DOS MBR takto nenastartuje." +msgid "" +"More than one primary partition is marked bootable. DOS MBR cannot boot this." +msgstr "" +"Více než 1 primární diskový oddíl je startovací. DOS MBR takto nenastartuje." #: fdisk/cfdisk.c:1989 fdisk/cfdisk.c:2108 fdisk/cfdisk.c:2192 msgid "Enter filename or press RETURN to display on screen: " @@ -1589,12 +1618,20 @@ msgid " First Last\n" msgstr " První Poslední\n" #: fdisk/cfdisk.c:2130 -msgid " # Type Sector Sector Offset Length Filesystem Type (ID) Flag\n" -msgstr " # Typ sektor sektor Posun Délka ID systému souborů Příz\n" +msgid "" +" # Type Sector Sector Offset Length Filesystem Type (ID) " +"Flag\n" +msgstr "" +" # Typ sektor sektor Posun Délka ID systému souborů " +"Příz\n" #: fdisk/cfdisk.c:2131 -msgid "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n" -msgstr "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n" +msgid "" +"-- ------- ----------- ----------- ------ ----------- -------------------- " +"----\n" +msgstr "" +"-- ------- ----------- ----------- ------ ----------- -------------------- " +"----\n" #: fdisk/cfdisk.c:2214 msgid " ---Starting---- ----Ending----- Start Number of\n" @@ -1606,7 +1643,8 @@ msgstr " # Příz. Hlav Sekt Cyl. ID Hlav Sekt Cyl. Sektor Sektorů\n" #: fdisk/cfdisk.c:2216 msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n" -msgstr "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n" +msgstr "" +"-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n" #: fdisk/cfdisk.c:2249 msgid "Raw" @@ -1964,7 +2002,8 @@ msgstr "Zvětšit" #: fdisk/cfdisk.c:2744 msgid "Maximize disk usage of the current partition (experts only)" -msgstr "Zvětší velikost aktuálního diskového oddílu na maximum (pouze pro odborníky)" +msgstr "" +"Zvětší velikost aktuálního diskového oddílu na maximum (pouze pro odborníky)" #: fdisk/cfdisk.c:2745 msgid "New" @@ -2082,7 +2121,8 @@ msgstr "" "Přepínače:\n" "-a: Namísto zvýrazňování použije šipku;\n" "-z: Začne s nulovou tabulkou rozdělení disku místo, aby ji četl z disku;\n" -"-c C -h H -s S: Zadání geometrie disku (má přednost před údaji, které udržuje\n" +"-c C -h H -s S: Zadání geometrie disku (má přednost před údaji, které " +"udržuje\n" " jádro.\n" "\n" @@ -2741,7 +2781,8 @@ msgid "" "\n" msgstr "" "Vytvářím novou DOSOVOU tabulku rozdělení disku s identifikátorem 0x%08x.\n" -"Změny budou uloženy pouze v paměti, dokud se nerozhodnete je uložit na disk.\n" +"Změny budou uloženy pouze v paměti, dokud se nerozhodnete je uložit na " +"disk.\n" "Poté již nebudou stará data pochopitelně dostupná.\n" #: fdisk/fdisk.c:843 @@ -2765,9 +2806,12 @@ msgstr "" #: fdisk/fdisk.c:1017 #, c-format -msgid "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel\n" +msgid "" +"Device contains neither a valid DOS partition table, nor Sun, SGI or OSF " +"disklabel\n" msgstr "" -"Zařízení neobsahuje ani DOSOVOU tabulku rozdělení disku, ani SUN či SGI popis\n" +"Zařízení neobsahuje ani DOSOVOU tabulku rozdělení disku, ani SUN či SGI " +"popis\n" "disku\n" #: fdisk/fdisk.c:1034 @@ -2782,8 +2826,12 @@ msgstr "Nadbytečný rozšířený diskový oddíl %d ignorován.\n" #: fdisk/fdisk.c:1059 #, c-format -msgid "Warning: invalid flag 0x%04x of partition table %d will be corrected by w(rite)\n" -msgstr "Varování: chybný příznak 0x%04x tabulky rozdělení disku %d bude opraven zápisem(w)\n" +msgid "" +"Warning: invalid flag 0x%04x of partition table %d will be corrected by w" +"(rite)\n" +msgstr "" +"Varování: chybný příznak 0x%04x tabulky rozdělení disku %d bude opraven " +"zápisem(w)\n" #: fdisk/fdisk.c:1081 #, c-format @@ -2901,7 +2949,9 @@ msgstr "" msgid "" "You cannot change a partition into an extended one or vice versa\n" "Delete it first.\n" -msgstr "Nemůžete měnit běžné diskové oddíly na rozšířené a zpět. Nejdříve jej smažte.\n" +msgstr "" +"Nemůžete měnit běžné diskové oddíly na rozšířené a zpět. Nejdříve jej " +"smažte.\n" #: fdisk/fdisk.c:1498 #, c-format @@ -2938,7 +2988,8 @@ msgstr "Typ diskového oddílu %d je nezměněn: %x (%s)\n" #: fdisk/fdisk.c:1576 #, c-format msgid "Partition %d has different physical/logical beginnings (non-Linux?):\n" -msgstr "Diskový oddíl %d má rozdílný fyzický a logický začátek (nelinuxový?):\n" +msgstr "" +"Diskový oddíl %d má rozdílný fyzický a logický začátek (nelinuxový?):\n" #: fdisk/fdisk.c:1578 fdisk/fdisk.c:1586 fdisk/fdisk.c:1595 fdisk/fdisk.c:1605 #, c-format @@ -3114,7 +3165,8 @@ msgstr "Logický diskový oddíl %d přesahuje mimo diskový oddíl %d.\n" #: fdisk/fdisk.c:1989 #, c-format msgid "Total allocated sectors %ld greater than the maximum %lld\n" -msgstr "Celkový počet alokovaných sektorů (%'ld) je větší než maximum (%'lld).\n" +msgstr "" +"Celkový počet alokovaných sektorů (%'ld) je větší než maximum (%'lld).\n" #: fdisk/fdisk.c:1992 #, c-format @@ -3294,11 +3346,13 @@ msgstr "Varování: nastaven posun sektoru kvůli kompatibilitě s DOSEM\n" #, c-format msgid "" "\n" -"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't support GPT. Use GNU Parted.\n" +"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't " +"support GPT. Use GNU Parted.\n" "\n" msgstr "" "\n" -"VAROVÁNÍ: Na „%s“ nalezena GPT (GUID tabulka rozdělení disku)! Nástroj fdisk nepodporuje GPT. Použijte GNU Parted.\n" +"VAROVÁNÍ: Na „%s“ nalezena GPT (GUID tabulka rozdělení disku)! Nástroj fdisk " +"nepodporuje GPT. Použijte GNU Parted.\n" "\n" #: fdisk/fdisk.c:2512 @@ -3324,13 +3378,17 @@ msgstr "příkaz %c není znám\n" #: fdisk/fdisk.c:2631 #, c-format msgid "This kernel finds the sector size itself - -b option ignored\n" -msgstr "Toto jádro detekuje velikost sektoru automaticky - přepínač -b ignorován\n" +msgstr "" +"Toto jádro detekuje velikost sektoru automaticky - přepínač -b ignorován\n" #: fdisk/fdisk.c:2635 #, c-format -msgid "Warning: the -b (set sector size) option should be used with one specified device\n" +msgid "" +"Warning: the -b (set sector size) option should be used with one specified " +"device\n" msgstr "" -"Varování: přepínač -b (nastavení velikosti sektoru) by měl být použit s jedním\n" +"Varování: přepínač -b (nastavení velikosti sektoru) by měl být použit s " +"jedním\n" " zadaným zařízením.\n" #: fdisk/fdisk.c:2695 @@ -3468,8 +3526,11 @@ msgstr "Linux RAID" #: fdisk/fdisksgilabel.c:164 #, c-format -msgid "According to MIPS Computer Systems, Inc the Label must not contain more than 512 bytes\n" -msgstr "Popis nesmí podle MIPS Computer Systems, Inc obsahovat více než 512 bajtů\n" +msgid "" +"According to MIPS Computer Systems, Inc the Label must not contain more than " +"512 bytes\n" +msgstr "" +"Popis nesmí podle MIPS Computer Systems, Inc obsahovat více než 512 bajtů\n" #: fdisk/fdisksgilabel.c:183 #, c-format @@ -3691,7 +3752,8 @@ msgstr "" "Doporučuje se, aby diskový oddíl začínající na pozici 0 byl typu\n" "„SGI volhdr“. IRIX jej používá k přístupu k nástrojům jako je sash\n" "a fx. Výjimkou je pouze „SGI svazek“ zaujímající celý disk.\n" -"Zadejte ANO, pokud jste si jist, že chcete označit tento diskový oddíl jinak.\n" +"Zadejte ANO, pokud jste si jist, že chcete označit tento diskový oddíl " +"jinak.\n" #: fdisk/fdisksgilabel.c:556 fdisk/fdisksunlabel.c:551 msgid "YES\n" @@ -3729,7 +3791,8 @@ msgstr "" #: fdisk/fdisksgilabel.c:673 #, c-format msgid "You will get a partition overlap on the disk. Fix it first!\n" -msgstr "Takto se diskové oddíly budou navzájem překrývat. Nejprve to opravte!\n" +msgstr "" +"Takto se diskové oddíly budou navzájem překrývat. Nejprve to opravte!\n" #: fdisk/fdisksgilabel.c:678 #, c-format @@ -3752,7 +3815,8 @@ msgstr "" #: fdisk/fdisksgilabel.c:730 fdisk/fdisksunlabel.c:226 #, c-format msgid "" -"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %d.\n" +"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %" +"d.\n" "This value may be truncated for devices > 33.8 GB.\n" msgstr "" "Varování: ioctl BLKGETSIZE selhalo na %s. Pro geometrii používám počet\n" @@ -3847,8 +3911,11 @@ msgstr "Nalezl jsem sunovský popis disku s chybným počtem_oddílů [%u].\n" #: fdisk/fdisksunlabel.c:168 #, c-format -msgid "Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n" -msgstr "Varování: Chybné hodnoty musí být opraveny a bude tak učiněno při zápisu (w)\n" +msgid "" +"Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n" +msgstr "" +"Varování: Chybné hodnoty musí být opraveny a bude tak učiněno při zápisu " +"(w)\n" #: fdisk/fdisksunlabel.c:198 #, c-format @@ -4368,7 +4435,8 @@ msgstr "chyba posunu ukazovátka na %s - ukazovátko nelze posunout na %lu\n" #: fdisk/sfdisk.c:184 #, c-format msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x\n" -msgstr "chyba při posunu ukazovátka: požadavek 0x%08x%08x, výsledek 0x%08x%08x\n" +msgstr "" +"chyba při posunu ukazovátka: požadavek 0x%08x%08x, výsledek 0x%08x%08x\n" #: fdisk/sfdisk.c:230 msgid "out of memory - giving up\n" @@ -4488,18 +4556,25 @@ msgstr "" #: fdisk/sfdisk.c:607 #, c-format -msgid "%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n" +msgid "" +"%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n" msgstr "%s diskového oddílu %s má chybný počet hlav: %lu (mělo by být 0-%lu)\n" #: fdisk/sfdisk.c:612 #, c-format -msgid "%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)\n" -msgstr "%s diskového oddílu %s má chybný počet sektorů: %lu (mělo by být 1-%lu)\n" +msgid "" +"%s of partition %s has impossible value for sector: %lu (should be in 1-%" +"lu)\n" +msgstr "" +"%s diskového oddílu %s má chybný počet sektorů: %lu (mělo by být 1-%lu)\n" #: fdisk/sfdisk.c:617 #, c-format -msgid "%s of partition %s has impossible value for cylinders: %lu (should be in 0-%lu)\n" -msgstr "%s diskového oddílu %s má chybný počet cylindrů: %lu (mělo by být 0-%lu)\n" +msgid "" +"%s of partition %s has impossible value for cylinders: %lu (should be in 0-%" +"lu)\n" +msgstr "" +"%s diskového oddílu %s má chybný počet cylindrů: %lu (mělo by být 0-%lu)\n" #: fdisk/sfdisk.c:657 #, c-format @@ -4602,7 +4677,8 @@ msgid "" "Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from %d\n" "\n" msgstr "" -"Jednotky = mebibajty po 1048576 bajtech, bloky po 1024 bajtech, počítáno od %d\n" +"Jednotky = mebibajty po 1048576 bajtech, bloky po 1024 bajtech, počítáno od %" +"d\n" "\n" #: fdisk/sfdisk.c:959 @@ -4667,7 +4743,8 @@ msgstr "Zvláštní - počet definovaných diskových oddílů je pouze %d.\n" #: fdisk/sfdisk.c:1203 #, c-format msgid "Warning: partition %s has size 0 but is not marked Empty\n" -msgstr "Varování: diskový oddíl %s má velikost 0 a není označen jako prázdný.\n" +msgstr "" +"Varování: diskový oddíl %s má velikost 0 a není označen jako prázdný.\n" #: fdisk/sfdisk.c:1206 #, c-format @@ -4705,7 +4782,8 @@ msgid "" "Warning: partition %s contains part of the partition table (sector %lu),\n" "and will destroy it when filled\n" msgstr "" -"Varování: diskový oddíl %s obsahuje část tabulky rozdělení disku (sektor %lu)\n" +"Varování: diskový oddíl %s obsahuje část tabulky rozdělení disku (sektor %" +"lu)\n" "a v případě zaplnění ji zničí\n" #: fdisk/sfdisk.c:1256 @@ -4766,7 +4844,8 @@ msgstr "začátek" #: fdisk/sfdisk.c:1347 #, c-format -msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" +msgid "" +"partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" msgstr "" "diskový oddíl %s: začátek: (c,h,s) předpoklad (%ld,%ld,%ld), nalezeno\n" "(%ld,%ld,%ld)\n" @@ -4897,7 +4976,9 @@ msgstr "Chybný typ\n" #: fdisk/sfdisk.c:2105 #, c-format msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n" -msgstr "Varování: zadaná velikost(%lu) překračuje maximální povolenou velikost (%lu)\n" +msgstr "" +"Varování: zadaná velikost(%lu) překračuje maximální povolenou velikost (%" +"lu)\n" #: fdisk/sfdisk.c:2111 msgid "Warning: empty partition\n" @@ -4934,7 +5015,8 @@ msgid "" " \n" "Usually you only need to specify and (and perhaps ).\n" msgstr "" -"Vstup v následujícím formátu; chybějící položky budou nahrazeny implicitními\n" +"Vstup v následujícím formátu; chybějící položky budou nahrazeny " +"implicitními\n" "hodnotami.\n" " \n" "Obvykle je třeba zadat pouze a (a možná ).\n" @@ -4966,15 +5048,19 @@ msgstr " -l [či --list]: ke každému zařízení vypíše diskové odd #: fdisk/sfdisk.c:2298 msgid " -d [or --dump]: idem, but in a format suitable for later input" -msgstr " -d [či --dump]: taktéž, ale ve formátu vhodném k dalšímu zpracování" +msgstr "" +" -d [či --dump]: taktéž, ale ve formátu vhodném k dalšímu zpracování" #: fdisk/sfdisk.c:2299 msgid " -i [or --increment]: number cylinders etc. from 1 instead of from 0" msgstr " -i [či --increment]: čísluje cylindry etc. od 1 místo od 0" #: fdisk/sfdisk.c:2300 -msgid " -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/MB" -msgstr " -uS, -uB, -uC, -uM: jako jednotky použije Sektory/Bloky/Cylindry či MB" +msgid "" +" -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/" +"MB" +msgstr "" +" -uS, -uB, -uC, -uM: jako jednotky použije Sektory/Bloky/Cylindry či MB" #: fdisk/sfdisk.c:2301 msgid " -T [or --list-types]:list the known partition types" @@ -4986,7 +5072,8 @@ msgstr " -D [či --DOS]: pro kompatibilitu s DOSEM: ubírá trochu mís #: fdisk/sfdisk.c:2303 msgid " -R [or --re-read]: make kernel reread partition table" -msgstr " -R [či --re-read]: donutí jádro znovu načíst tabulku rozdělení disku" +msgstr "" +" -R [či --re-read]: donutí jádro znovu načíst tabulku rozdělení disku" #: fdisk/sfdisk.c:2304 msgid " -N# : change only the partition with number #" @@ -4997,7 +5084,8 @@ msgid " -n : do not actually write to disk" msgstr " -n : žádné změny nebudou uloženy na disk" #: fdisk/sfdisk.c:2306 -msgid " -O file : save the sectors that will be overwritten to file" +msgid "" +" -O file : save the sectors that will be overwritten to file" msgstr " -O SOUBOR : uloží změněné sektory do SOUBORU" #: fdisk/sfdisk.c:2307 @@ -5023,7 +5111,9 @@ msgstr "" " vypíše informace o geometrii, které udržuje jádro" #: fdisk/sfdisk.c:2312 -msgid " -G [or --show-pt-geometry]: print geometry guessed from the partition table" +msgid "" +" -G [or --show-pt-geometry]: print geometry guessed from the partition " +"table" msgstr "" " -G [či --show-pt-geometry]:\n" " vypíše informace o geometrii, která byla odhadnuta\n" @@ -5039,8 +5129,10 @@ msgstr "" " oddílech a na vstupu bude očekávat jejich popis" #: fdisk/sfdisk.c:2315 -msgid " -L [or --Linux]: do not complain about things irrelevant for Linux" -msgstr " -L [či --Linux]: problémy nepodstatné pro Linux budou ignorovány" +msgid "" +" -L [or --Linux]: do not complain about things irrelevant for Linux" +msgstr "" +" -L [či --Linux]: problémy nepodstatné pro Linux budou ignorovány" #: fdisk/sfdisk.c:2316 msgid " -q [or --quiet]: suppress warning messages" @@ -5082,7 +5174,8 @@ msgstr "%s zařízení\t\t vypíše aktivní diskové oddíly na daném zaříze #: fdisk/sfdisk.c:2330 #, c-format msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n" -msgstr "%s zařízení n1 n2 ... aktivuje diskové oddíly n1 ..., deaktivuje ostatní\n" +msgstr "" +"%s zařízení n1 n2 ... aktivuje diskové oddíly n1 ..., deaktivuje ostatní\n" #: fdisk/sfdisk.c:2331 #, c-format @@ -5093,11 +5186,13 @@ msgstr "%s -An zařízení\t aktivuje diskový oddíl n, deaktivuje ostatní\n" #, c-format msgid "" "\n" -"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk doesn't support GPT. Use GNU Parted.\n" +"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk " +"doesn't support GPT. Use GNU Parted.\n" "\n" msgstr "" "\n" -"VAROVÁNÍ: Na „%s“ nalezena GPT (GUID tabulka rozdělení disku)! Nástroj sfdisk nepodporuje GPT. Použijte GNU Parted.\n" +"VAROVÁNÍ: Na „%s“ nalezena GPT (GUID tabulka rozdělení disku)! Nástroj " +"sfdisk nepodporuje GPT. Použijte GNU Parted.\n" "\n" #: fdisk/sfdisk.c:2453 @@ -5174,7 +5269,8 @@ msgid "" "You have %d active primary partitions. This does not matter for LILO,\n" "but the DOS MBR will only boot a disk with 1 active partition.\n" msgstr "" -"Počet aktivních diskových oddílů je %d. LILU to nečiní problémy, ale DOS MBR\n" +"Počet aktivních diskových oddílů je %d. LILU to nečiní problémy, ale DOS " +"MBR\n" "nastartuje pouze z disku s jedním aktivním diskovým oddílem.\n" #: fdisk/sfdisk.c:2925 @@ -5296,8 +5392,10 @@ msgid "" "to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n" "(See fdisk(8).)\n" msgstr "" -"Pokud jste vytvořil či změnil nějaké DOSOVÉ diskové oddíly - např. /dev/bla7,\n" -"použijte dd(1) k vynulování prvních 512 bajtů: 'dd if=/dev/zero of=/dev/bla7\n" +"Pokud jste vytvořil či změnil nějaké DOSOVÉ diskové oddíly - např. /dev/" +"bla7,\n" +"použijte dd(1) k vynulování prvních 512 bajtů: 'dd if=/dev/zero of=/dev/" +"bla7\n" "bs=512 count=1' (viz fdisk(8)).\n" #: getopt/getopt.c:235 @@ -5329,8 +5427,10 @@ msgid " parameters\n" msgstr " argumenty\n" #: getopt/getopt.c:330 -msgid " -a, --alternative Allow long options starting with single -\n" -msgstr " -a, --alternative Akceptuje dlouhé volby začínající jedním -\n" +msgid "" +" -a, --alternative Allow long options starting with single -\n" +msgstr "" +" -a, --alternative Akceptuje dlouhé volby začínající jedním -\n" #: getopt/getopt.c:331 msgid " -h, --help This small usage guide\n" @@ -5341,8 +5441,10 @@ msgid " -l, --longoptions=longopts Long options to be recognized\n" msgstr " -l, --longoptions=dlouhvol Rozpoznávané dlouhé volby\n" #: getopt/getopt.c:333 -msgid " -n, --name=progname The name under which errors are reported\n" -msgstr " -n, --name=názevprog Název, pod kterým jsou oznamovány chyby\n" +msgid "" +" -n, --name=progname The name under which errors are reported\n" +msgstr "" +" -n, --name=názevprog Název, pod kterým jsou oznamovány chyby\n" #: getopt/getopt.c:334 msgid " -o, --options=optstring Short options to be recognized\n" @@ -5350,7 +5452,8 @@ msgstr " -o, --options=krátvol Rozpoznávané krátké volby\n" #: getopt/getopt.c:335 msgid " -q, --quiet Disable error reporting by getopt(3)\n" -msgstr " -q, --quiet Vypne oznamování chyb pomocí getopt(3)\n" +msgstr "" +" -q, --quiet Vypne oznamování chyb pomocí getopt(3)\n" #: getopt/getopt.c:336 msgid " -Q, --quiet-output No normal output\n" @@ -5485,12 +5588,15 @@ msgstr "…hodiny tikly\n" #: hwclock/hwclock.c:408 #, c-format msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n" -msgstr "Hodiny reálného času obsahují chybné hodnoty: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n" +msgstr "" +"Hodiny reálného času obsahují chybné hodnoty: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n" #: hwclock/hwclock.c:416 #, c-format msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n" -msgstr "Hodiny reálného času: %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld sekund od roku 1969\n" +msgstr "" +"Hodiny reálného času: %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld sekund od roku " +"1969\n" #: hwclock/hwclock.c:444 #, c-format @@ -5500,7 +5606,8 @@ msgstr "Hodiny reálného času ukazují %4d/%.2d/%.2d %02d:%02d:%02d\n" #: hwclock/hwclock.c:471 #, c-format msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n" -msgstr "Nastavuji hodiny reálného času na %.2d:%.2d:%.2d = %ld sekund od roku 1969\n" +msgstr "" +"Nastavuji hodiny reálného času na %.2d:%.2d:%.2d = %ld sekund od roku 1969\n" #: hwclock/hwclock.c:477 #, c-format @@ -5518,7 +5625,9 @@ msgstr "" #: hwclock/hwclock.c:559 #, c-format -msgid "The Hardware Clock registers contain values that are either invalid (e.g. 50th day of month) or beyond the range we can handle (e.g. Year 2095).\n" +msgid "" +"The Hardware Clock registers contain values that are either invalid (e.g. " +"50th day of month) or beyond the range we can handle (e.g. Year 2095).\n" msgstr "" "Registry hodin reálného času obsahují hodnoty, které jsou buď chybné (např.\n" "50tý den v měsíci), či mimo přípustný rozsah (např. rok 2095).\n" @@ -5543,7 +5652,8 @@ msgstr "argument --date je příliš dlouhý\n" msgid "" "The value of the --date option is not a valid date.\n" "In particular, it contains quotation marks.\n" -msgstr "Argument přepínače --date není platným datem. Konkrétně obsahuje uvozovky.\n" +msgstr "" +"Argument přepínače --date není platným datem. Konkrétně obsahuje uvozovky.\n" #: hwclock/hwclock.c:624 #, c-format @@ -5577,7 +5687,8 @@ msgstr "" #: hwclock/hwclock.c:650 #, c-format msgid "" -"The date command issued by %s returned something other than an integer where the converted time value was expected.\n" +"The date command issued by %s returned something other than an integer where " +"the converted time value was expected.\n" "The command was:\n" " %s\n" "The response was:\n" @@ -5597,7 +5708,9 @@ msgstr "Datum %s odpovídá %ld sekundám od roku 1969.\n" #: hwclock/hwclock.c:693 #, c-format -msgid "The Hardware Clock does not contain a valid time, so we cannot set the System Time from it.\n" +msgid "" +"The Hardware Clock does not contain a valid time, so we cannot set the " +"System Time from it.\n" msgstr "" "Systémový čas nelze podle hodin reálného času nastavit, protože neukazují\n" "platný čas.\n" @@ -5633,7 +5746,9 @@ msgstr "volání settimeofday() selhalo" #: hwclock/hwclock.c:763 #, c-format -msgid "Not adjusting drift factor because the Hardware Clock previously contained garbage.\n" +msgid "" +"Not adjusting drift factor because the Hardware Clock previously contained " +"garbage.\n" msgstr "" "Neopravuji míru posunu, protože hodiny reálného času posledně obsahovaly\n" "neplatné hodnoty.\n" @@ -5649,16 +5764,22 @@ msgstr "" #: hwclock/hwclock.c:774 #, c-format -msgid "Not adjusting drift factor because it has been less than a day since the last calibration.\n" -msgstr "Neopravuji míru posunu, protože poslední kalibrace ještě neuplynul celý den.\n" +msgid "" +"Not adjusting drift factor because it has been less than a day since the " +"last calibration.\n" +msgstr "" +"Neopravuji míru posunu, protože poslední kalibrace ještě neuplynul celý " +"den.\n" #: hwclock/hwclock.c:822 #, c-format msgid "" -"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor of %f seconds/day.\n" +"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor " +"of %f seconds/day.\n" "Adjusting drift factor by %f seconds/day\n" msgstr "" -"Hodiny se za posledních %2$d sekund rozešly o %1$.1f sekund, přestože míra posunu\n" +"Hodiny se za posledních %2$d sekund rozešly o %1$.1f sekund, přestože míra " +"posunu\n" "je nastavena na %3$f sekund/den.\n" "Opravuji míru posunu o %4$f sekund.\n" @@ -5693,7 +5814,8 @@ msgstr "Parametry opravy posunu nezměněny.\n" #: hwclock/hwclock.c:969 #, c-format -msgid "The Hardware Clock does not contain a valid time, so we cannot adjust it.\n" +msgid "" +"The Hardware Clock does not contain a valid time, so we cannot adjust it.\n" msgstr "Hodiny reálného času obsahují neplatný čas, tudíž jej nelze opravit.\n" #: hwclock/hwclock.c:1000 @@ -5719,11 +5841,13 @@ msgstr "Systémový čas nelze nastavit.\n" #: hwclock/hwclock.c:1156 #, c-format msgid "" -"The kernel keeps an epoch value for the Hardware Clock only on an Alpha machine.\n" +"The kernel keeps an epoch value for the Hardware Clock only on an Alpha " +"machine.\n" "This copy of hwclock was built for a machine other than Alpha\n" "(and thus is presumably not running on an Alpha now). No action taken.\n" msgstr "" -"Jádro obsahuje hodnotu počátku epochy pro hodiny reálného času pouze na Alpha\n" +"Jádro obsahuje hodnotu počátku epochy pro hodiny reálného času pouze na " +"Alpha\n" "systémech.\n" "Tento program nebyl přeložen pro Alpha systém ( a tudíž pravděpodobně nyní\n" "neběží na Alphě). Ignorováno.\n" @@ -5740,7 +5864,9 @@ msgstr "Jádro pokládá za počátek epochy %lu.\n" #: hwclock/hwclock.c:1170 #, c-format -msgid "To set the epoch value, you must use the 'epoch' option to tell to what value to set it.\n" +msgid "" +"To set the epoch value, you must use the 'epoch' option to tell to what " +"value to set it.\n" msgstr "Počátek epochy nastavíte pomocí přepínačů epoch a setepoch.\n" #: hwclock/hwclock.c:1173 @@ -5840,7 +5966,8 @@ msgstr "%s: Nelze se připojit ke kontrolnímu systému\n" #: hwclock/hwclock.c:1441 #, c-format msgid "%s takes no non-option arguments. You supplied %d.\n" -msgstr "%s akceptuje pouze přepínače. Zadáno argumentů, které nejsou přepínači: %d\n" +msgstr "" +"%s akceptuje pouze přepínače. Zadáno argumentů, které nejsou přepínači: %d\n" #: hwclock/hwclock.c:1447 #, c-format @@ -5853,18 +5980,28 @@ msgstr "" #: hwclock/hwclock.c:1454 #, c-format -msgid "%s: The --utc and --localtime options are mutually exclusive. You specified both.\n" +msgid "" +"%s: The --utc and --localtime options are mutually exclusive. You specified " +"both.\n" msgstr "%s: Přepínače --utc a --localtime nelze použít zároveň.\n" #: hwclock/hwclock.c:1461 #, c-format -msgid "%s: The --adjust and --noadjfile options are mutually exclusive. You specified both.\n" -msgstr "%s: Volby --adjust a --noadjfile se vzájemně vylučují. Vy jste však použil obě.\n" +msgid "" +"%s: The --adjust and --noadjfile options are mutually exclusive. You " +"specified both.\n" +msgstr "" +"%s: Volby --adjust a --noadjfile se vzájemně vylučují. Vy jste však použil " +"obě.\n" #: hwclock/hwclock.c:1468 #, c-format -msgid "%s: The --adjfile and --noadjfile options are mutually exclusive. You specified both.\n" -msgstr "%s: Volby --adjfile a --noadjfile se vzájemně vylučují. Vy jste však použil(a) obě.\n" +msgid "" +"%s: The --adjfile and --noadjfile options are mutually exclusive. You " +"specified both.\n" +msgstr "" +"%s: Volby --adjfile a --noadjfile se vzájemně vylučují. Vy jste však použil" +"(a) obě.\n" #: hwclock/hwclock.c:1477 #, c-format @@ -5888,17 +6025,22 @@ msgstr "Hodiny reálného času může nastavit pouze superuživatel.\n" #: hwclock/hwclock.c:1517 #, c-format -msgid "Sorry, only the superuser can change the Hardware Clock epoch in the kernel.\n" +msgid "" +"Sorry, only the superuser can change the Hardware Clock epoch in the " +"kernel.\n" msgstr "Hodnotu počátku epochy v jádře může nastavit pouze superuživatel.\n" #: hwclock/hwclock.c:1537 #, c-format msgid "Cannot access the Hardware Clock via any known method.\n" -msgstr "Žádným ze známých způsobů nelze získat přístup k hodinám reálného času.\n" +msgstr "" +"Žádným ze známých způsobů nelze získat přístup k hodinám reálného času.\n" #: hwclock/hwclock.c:1541 #, c-format -msgid "Use the --debug option to see the details of our search for an access method.\n" +msgid "" +"Use the --debug option to see the details of our search for an access " +"method.\n" msgstr "Pro zjištění podrobností použijte přepínač --debug.\n" #: hwclock/kd.c:55 @@ -5998,9 +6140,13 @@ msgstr "%s nelze otevřít." #: hwclock/rtc.c:397 hwclock/rtc.c:443 #, c-format -msgid "To manipulate the epoch value in the kernel, we must access the Linux 'rtc' device driver via the device special file %s. This file does not exist on this system.\n" +msgid "" +"To manipulate the epoch value in the kernel, we must access the Linux 'rtc' " +"device driver via the device special file %s. This file does not exist on " +"this system.\n" msgstr "" -"Pro změnu hodnoty počátku epochy v jádře je nutné použít 'rtc' ovladač pomocí\n" +"Pro změnu hodnoty počátku epochy v jádře je nutné použít 'rtc' ovladač " +"pomocí\n" "zvláštního souboru %s. Tento soubor na tomto systému souborů neexistuje.\n" #: hwclock/rtc.c:402 hwclock/rtc.c:448 @@ -6016,7 +6162,8 @@ msgstr "volání(RTC_EPOCH_READ) pro %s selhalo" #: hwclock/rtc.c:415 #, c-format msgid "we have read epoch %ld from %s with RTC_EPOCH_READ ioctl.\n" -msgstr "Z %2$s byl pomocí RTC_EPOCH_READ ioctl zjištěn počátek epochy (%1$ld).\n" +msgstr "" +"Z %2$s byl pomocí RTC_EPOCH_READ ioctl zjištěn počátek epochy (%1$ld).\n" #: hwclock/rtc.c:435 #, c-format @@ -6026,11 +6173,13 @@ msgstr "Hodnota počátku epochy nesmí být menší než 1900 (požadováno %ld #: hwclock/rtc.c:453 #, c-format msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n" -msgstr "Nastavuji pomocí RTC_EPOCH_SET ioctl pro %2$s počátek epochy na %1$ld.\n" +msgstr "" +"Nastavuji pomocí RTC_EPOCH_SET ioctl pro %2$s počátek epochy na %1$ld.\n" #: hwclock/rtc.c:458 #, c-format -msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n" +msgid "" +"The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n" msgstr "Ovladač jádra pro %s nepodporuje RTC_EPOCH_SET ioctl.\n" #: hwclock/rtc.c:461 @@ -6109,11 +6258,15 @@ msgstr "%s: přetečení vstupu" #: login-utils/agetty.c:1203 #, c-format msgid "" -"Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n" -"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n" +"Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H " +"login_host] baud_rate,... line [termtype]\n" +"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] " +"line baud_rate,... [termtype]\n" msgstr "" -"Použití: %s [-8hiLmUw] [-l LOGIN_PROGRAM] [-t ČASOVÝ_LIMIT] [-I INICIALIZAČNÍ_ŘETĚZEC] [-H POČÍTAČ] BAUD_RATE,… LINKA [TYP_TERMINÁLU]\n" -"či\t[-hiLmw] [-l LOGIN_PROGRAM] [-t ČASOVÝ_LIMIT] [-I INICIALIZAČNÍ_ŘETĚZEC] [-H POČÍTAČ] LINKA BAUD_RATE,… [TYP_TERMINÁLU]\n" +"Použití: %s [-8hiLmUw] [-l LOGIN_PROGRAM] [-t ČASOVÝ_LIMIT] [-I " +"INICIALIZAČNÍ_ŘETĚZEC] [-H POČÍTAČ] BAUD_RATE,… LINKA [TYP_TERMINÁLU]\n" +"či\t[-hiLmw] [-l LOGIN_PROGRAM] [-t ČASOVÝ_LIMIT] [-I INICIALIZAČNÍ_ŘETĚZEC] " +"[-H POČÍTAČ] LINKA BAUD_RATE,… [TYP_TERMINÁLU]\n" #: login-utils/checktty.c:91 login-utils/checktty.c:112 #, c-format @@ -6256,7 +6409,9 @@ msgstr "%s: %s není oprávněn měnit shell uživatele %s\n" #: login-utils/chsh.c:164 #, c-format -msgid "%s: Running UID doesn't match UID of user we're altering, shell change denied\n" +msgid "" +"%s: Running UID doesn't match UID of user we're altering, shell change " +"denied\n" msgstr "" "%s: Aktuální UID se neshoduje s UID uživatele, kterého chceme změnit,\n" "změna shellu odmítnuta\n" @@ -6815,7 +6970,8 @@ msgstr "%s nelze spustit - volání exec selhalo, zkouším umount.\n" #: login-utils/shutdown.c:609 msgid "Cannot exec umount, giving up on umount." -msgstr "Umount nelze spustit - volání exec selhalo, vzdávám snahu o spuštění umount." +msgstr "" +"Umount nelze spustit - volání exec selhalo, vzdávám snahu o spuštění umount." #: login-utils/shutdown.c:614 msgid "Unmounting any remaining filesystems..." @@ -6832,11 +6988,13 @@ msgstr "Startuji do režimu pro jednoho uživatele.\n" #: login-utils/simpleinit.c:136 msgid "exec of single user shell failed\n" -msgstr "Spuštění shellu pro jednoho uživatele se nezdařilo - volání exec selhalo.\n" +msgstr "" +"Spuštění shellu pro jednoho uživatele se nezdařilo - volání exec selhalo.\n" #: login-utils/simpleinit.c:140 msgid "fork of single user shell failed\n" -msgstr "Spuštění shellu pro jednoho uživatele se nezdařilo - volání fork selhalo.\n" +msgstr "" +"Spuštění shellu pro jednoho uživatele se nezdařilo - volání fork selhalo.\n" #: login-utils/simpleinit.c:208 msgid "error opening fifo\n" @@ -7109,8 +7267,10 @@ msgstr "logger: neznámý název priority: %s\n" #: misc-utils/logger.c:285 #, c-format -msgid "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n" -msgstr "Použití: logger [-is] [-f soubor] [-p pri] [-t značka] [-u soket] [zpráva…]\n" +msgid "" +"usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n" +msgstr "" +"Použití: logger [-is] [-f soubor] [-p pri] [-t značka] [-u soket] [zpráva…]\n" #: misc-utils/look.c:351 #, c-format @@ -7820,7 +7980,8 @@ msgid "" " %1$s -a | --all list all used\n" " %1$s -d | --detach delete\n" " %1$s -f | --find find unused\n" -" %1$s -j | --associated [-o ] list all associated with \n" +" %1$s -j | --associated [-o ] list all associated with " +"\n" " %1$s [ options ] {-f|--find|loopdev} setup\n" msgstr "" "\n" @@ -7829,7 +7990,8 @@ msgstr "" " %1$s -a | --all vypíše všechna použitá\n" " %1$s -d | --detach LOOP_ZAŘÍZENÍ smaže\n" " %1$s -f | --find najde nepoužitá\n" -" %1$s -j | --associated SOUBOR [-o ČÍSLO] vypíše spojená se SOUBOREM\n" +" %1$s -j | --associated SOUBOR [-o ČÍSLO] vypíše spojená se " +"SOUBOREM\n" " %1$s [PŘEPÍNAČE] {-f|--find|LOOP_ZAŘÍZENÍ} SOUBOR nastaví\n" #: mount/lomount.c:874 @@ -8036,7 +8198,8 @@ msgid "mount: according to mtab, %s is already mounted on %s\n" msgstr "mount: podle mtab je %s již připojeno do %s\n" #: mount/mount.c:1195 -msgid "mount: I could not determine the filesystem type, and none was specified" +msgid "" +"mount: I could not determine the filesystem type, and none was specified" msgstr "mount: typ systému souborů nebyl zadán a ani jej nelze zjistit" #: mount/mount.c:1198 @@ -8189,7 +8352,8 @@ msgstr "mount: %s není blokovým zařízením a volání stat selhalo?" msgid "" "mount: the kernel does not recognize %s as a block device\n" " (maybe `insmod driver'?)" -msgstr "mount: jádro nerozpoznalo %s jako blokové zařízení (možná „insmod ovladač“?)" +msgstr "" +"mount: jádro nerozpoznalo %s jako blokové zařízení (možná „insmod ovladač“?)" #: mount/mount.c:1343 #, c-format @@ -8246,7 +8410,8 @@ msgid "" msgstr "" "mount: %s neobsahuje značky SELinuxu.\n" " Právě jste připojili souborový systém, který značky podporuje, ale\n" -" neobsahjuje ani jednu, do stroje s podporou SELinuxu. Je pravděpodobné,\n" +" neobsahjuje ani jednu, do stroje s podporou SELinuxu. Je " +"pravděpodobné,\n" " že omezené aplikace budou generovat zprávy AVC a nebude jim dovoleno\n" " přistoupit na tento systém souborů. Další rady lze nalézt\n" " v restorecon(8) a mount(8).\n" @@ -8304,9 +8469,11 @@ msgid "" msgstr "" "Použití: mount -V : vypíše informace o verzi\n" " mount -h : vypíše tuto nápovědu\n" -" mount : zobrazí seznam připojených systémů souborů\n" +" mount : zobrazí seznam připojených systémů " +"souborů\n" " mount -l : totéž plus jmenovky svazků\n" -"Toto byly přepínače sloužící k získání informací. Nyní k přepínačům sloužícím\n" +"Toto byly přepínače sloužící k získání informací. Nyní k přepínačům " +"sloužícím\n" "k připojování systémů souborů.\n" "Syntaxe je „mount [-t SSTYP] NĚCO NĚKAM“.\n" "Údaje obsažené v /etc/fstab mohou být vynechány.\n" @@ -8314,7 +8481,8 @@ msgstr "" " mount ZAŘÍZENÍ : připojí ZAŘÍZENÍ na známé místo\n" " mount ADRESÁŘ : připojí známé zařízení k ADRESÁŘI\n" " mount -t TYP ZAŘ ADR : běžná podoba příkazu pro připojení\n" -"Uvědomte si, že tím, co se připojuje, ve skutečnosti není zařízení, ale systém\n" +"Uvědomte si, že tím, co se připojuje, ve skutečnosti není zařízení, ale " +"systém\n" "souborů (daného typu), který se na tomto zařízení nachází.\n" "Můžete také připojit již přístupný adresářový strom na jiné místo:\n" " mount --bind STARÝ_ADRESÁŘ NOVÝ_ADRESÁŘ\n" @@ -8462,7 +8630,9 @@ msgstr "%s: nelze získat informace o %s: %s\n" #: mount/swapon.c:268 #, c-format msgid "%s: %s: software suspend data detected. Reinitializing the swap.\n" -msgstr "%s: %s: nalezena data ze softwarového uspání. Reinicializuji odkládací oblast.\n" +msgstr "" +"%s: %s: nalezena data ze softwarového uspání. Reinicializuji odkládací " +"oblast.\n" #: mount/swapon.c:281 #, c-format @@ -8570,7 +8740,8 @@ msgstr "%s nelze odpojit - zkouším %s\n" #: mount/umount.c:270 #, c-format msgid "umount: %s busy - remounted read-only\n" -msgstr "umount: %s je právě používáno - znovu připojeno v režimu pro pouze čtení\n" +msgstr "" +"umount: %s je právě používáno - znovu připojeno v režimu pro pouze čtení\n" #: mount/umount.c:281 #, c-format @@ -8662,10 +8833,12 @@ msgstr "" #: sys-utils/cytune.c:125 #, c-format msgid "" -"File %s, For threshold value %lu and timrout value %lu, Maximum characters in fifo were %d,\n" +"File %s, For threshold value %lu and timrout value %lu, Maximum characters " +"in fifo were %d,\n" "and the maximum transfer rate in characters/second was %f\n" msgstr "" -"Soubor %s, pro prahovou hodnotu %lu a časový limit %lu, maximální počet znaků\n" +"Soubor %s, pro prahovou hodnotu %lu a časový limit %lu, maximální počet " +"znaků\n" "ve fifo byl %d a maximální přenosová rychlost ve znacích za sekundu byla %f\n" #: sys-utils/cytune.c:189 @@ -8695,8 +8868,12 @@ msgstr "Chybný implicitní časový údaj: %s\n" #: sys-utils/cytune.c:238 #, c-format -msgid "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [file...]\n" -msgstr "Použití: %s [-q [-i interval]] ([-s hodnota]|[-S hodnota]) ([-t hodnota]|[-T hodnota]) [-g|-G] soubor [soubor…]\n" +msgid "" +"Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) " +"[-g|-G] file [file...]\n" +msgstr "" +"Použití: %s [-q [-i interval]] ([-s hodnota]|[-S hodnota]) ([-t hodnota]|[-T " +"hodnota]) [-g|-G] soubor [soubor…]\n" #: sys-utils/cytune.c:250 sys-utils/cytune.c:269 sys-utils/cytune.c:289 #: sys-utils/cytune.c:339 @@ -8749,8 +8926,11 @@ msgstr "CYGETMON nelze na %s provést: %s\n" #: sys-utils/cytune.c:418 #, c-format -msgid "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" -msgstr "%s: %lu přerušení, %lu/%lu znaků; fifo: %lu práh, %lu časový limit, %lu max, %lu nyní\n" +msgid "" +"%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" +msgstr "" +"%s: %lu přerušení, %lu/%lu znaků; fifo: %lu práh, %lu časový limit, %lu max, " +"%lu nyní\n" #: sys-utils/cytune.c:424 #, c-format @@ -8759,8 +8939,11 @@ msgstr " %f přer./s; %f příj., %f odesl. (znak/s)\n" #: sys-utils/cytune.c:429 #, c-format -msgid "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" -msgstr "%s: %lu přerušení, %lu znaků; fifo: %lu práh, %lu časový limit, %lu max, %lu nyní\n" +msgid "" +"%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" +msgstr "" +"%s: %lu přerušení, %lu znaků; fifo: %lu práh, %lu časový limit, %lu max, %lu " +"nyní\n" #: sys-utils/cytune.c:435 #, c-format @@ -8804,7 +8987,8 @@ msgid "" " [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n" msgstr "" "Použití: %s [ [-q ID_ZPRÁVY] [-m ID_SDÍLENÉ_PAMĚTI] [-s ID_SEMAFORU]\n" -" [-Q KLÍČ_ZPRÁVY] [-M KLÍČ_SDÍLENÉ_PAMĚTI] [-S KLÍČ_SEMAFORU] … ]\n" +" [-Q KLÍČ_ZPRÁVY] [-M KLÍČ_SDÍLENÉ_PAMĚTI] [-S KLÍČ_SEMAFORU] " +"… ]\n" #: sys-utils/ipcrm.c:181 #, c-format @@ -8875,7 +9059,8 @@ msgstr "\t%s -h pro nápovědu.\n" #: sys-utils/ipcs.c:130 #, c-format -msgid "%s provides information on ipc facilities for which you have read access.\n" +msgid "" +"%s provides information on ipc facilities for which you have read access.\n" msgstr "%s poskytuje informace o IPC prostředcích, které můžete číst.\n" #: sys-utils/ipcs.c:132 @@ -9459,7 +9644,8 @@ msgid "usage: rdev [ -rv ] [ -o OFFSET ] [ IMAGE [ VALUE [ OFFSET ] ] ]" msgstr "Použití: rdev [ -rv ] [ -o POSUN ] [ OBRAZ [ HODNOTA [ POSUN ] ] ]" #: sys-utils/rdev.c:70 -msgid " rdev /dev/fd0 (or rdev /linux, etc.) displays the current ROOT device" +msgid "" +" rdev /dev/fd0 (or rdev /linux, etc.) displays the current ROOT device" msgstr " rdev /dev/fd0 (či rdev /linux, etc.) vypíše aktuální ROOT zařízení" #: sys-utils/rdev.c:71 @@ -9468,7 +9654,8 @@ msgstr " rdev /dev/fd0 /dev/hda2 nastaví ROOT na /dev/hda2" #: sys-utils/rdev.c:72 msgid " rdev -R /dev/fd0 1 set the ROOTFLAGS (readonly status)" -msgstr " rdev -R /dev/fd0 1 nastaví PŘÍZNAKY ROOT (pouze pro čtení)" +msgstr "" +" rdev -R /dev/fd0 1 nastaví PŘÍZNAKY ROOT (pouze pro čtení)" #: sys-utils/rdev.c:73 msgid " rdev -r /dev/fd0 627 set the RAMDISK size" @@ -9495,8 +9682,10 @@ msgid " vidmode ... same as rdev -v" msgstr " vidmód ... stejné jako rdev -v" #: sys-utils/rdev.c:79 -msgid "Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..." -msgstr "Poznámka: video módy: -3=Ask, -2=Extended, -1=NormalVga, 1=kláv1, 2=kláv2,..." +msgid "" +"Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..." +msgstr "" +"Poznámka: video módy: -3=Ask, -2=Extended, -1=NormalVga, 1=kláv1, 2=kláv2,..." #: sys-utils/rdev.c:80 msgid " use -R 1 to mount root readonly, -R 0 for read/write." @@ -9550,7 +9739,8 @@ msgstr "readprofile: chyba při zápisu %s: %s\n" #: sys-utils/readprofile.c:268 #, c-format msgid "Assuming reversed byte order. Use -n to force native byte order.\n" -msgstr "Předpokládám opačné pořadí bajtů. Systémové pořadí lze vynutit pomocí -n.\n" +msgstr "" +"Předpokládám opačné pořadí bajtů. Systémové pořadí lze vynutit pomocí -n.\n" #: sys-utils/readprofile.c:284 #, c-format @@ -9765,7 +9955,8 @@ msgstr "" msgid "" " -h, --help displays this help text\n" " -v, --verbose says what options are being switched on\n" -" -R, --addr-no-randomize disables randomization of the virtual address space\n" +" -R, --addr-no-randomize disables randomization of the virtual address " +"space\n" " -F, --fdpic-funcptrs makes function pointers point to descriptors\n" " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n" " -L, --addr-compat-layout changes the way virtual memory is allocated\n" @@ -9774,7 +9965,8 @@ msgid "" " -I, --short-inode turns on SHORT_INODE\n" " -S, --whole-seconds turns on WHOLE_SECONDS\n" " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n" -" -3, --3gb limits the used address space to a maximum of 3 GB\n" +" -3, --3gb limits the used address space to a maximum of 3 " +"GB\n" " --4gb ignored (for backward compatibility only)\n" msgstr "" " -h, --help vypíše text této nápovědy\n" @@ -9782,7 +9974,8 @@ msgstr "" " -R, --addr-no-randomize vypne znáhodnění prostoru virtuálních adres\n" " -F, --fdpic-funcptrs učiní ukazatele funkcí ukazující na deskriptory\n" " -Z, --mmap-page-zero zapne MMAP_PAGE_ZERO\n" -" -L, --addr-compat-layout změní způsob, jakým je virtuální paměť přidělována\n" +" -L, --addr-compat-layout změní způsob, jakým je virtuální paměť " +"přidělována\n" " -X, --read-implies-exec zapne READ_IMPLIES_EXEC\n" " -B, --32bit zapne ADDR_LIMIT_32BIT\n" " -I, --short-inode zapne SHORT_INODE\n" @@ -9952,8 +10145,11 @@ msgstr "hexdump: chybná vzdálenost\n" #: text-utils/hexsyntax.c:131 #, c-format -msgid "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n" -msgstr "hexdump: [-bcCdovx] [-e FMT] [-f FMT_SOUBOR] [-n DÉLKA] [-s VZDÁLENOST] [SOUBOR…]\n" +msgid "" +"hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n" +msgstr "" +"hexdump: [-bcCdovx] [-e FMT] [-f FMT_SOUBOR] [-n DÉLKA] [-s VZDÁLENOST] " +"[SOUBOR…]\n" #: text-utils/more.c:256 #, c-format @@ -10037,11 +10233,13 @@ msgstr "" #: text-utils/more.c:1294 msgid "" "\n" -"Most commands optionally preceded by integer argument k. Defaults in brackets.\n" +"Most commands optionally preceded by integer argument k. Defaults in " +"brackets.\n" "Star (*) indicates argument becomes new default.\n" msgstr "" "\n" -"Většině příkazů může jako argument předcházet celé číslo k. Implicitní hodnoty\n" +"Většině příkazů může jako argument předcházet celé číslo k. Implicitní " +"hodnoty\n" "jsou v hranatých závorkách. Hvězdička (*) znamená, že hodnota argumentu se\n" "stane implicitní.\n" @@ -10072,13 +10270,15 @@ msgstr "" "z Zobrazí dalších k řádků textu. [aktuální velikost\n" " obrazovky]*\n" " Zobrazí dalších k řádků textu. [1]*\n" -"d či ctrl-D Posun o k řádků [aktuální velikost posunu, po spuštění\n" +"d či ctrl-D Posun o k řádků [aktuální velikost posunu, po " +"spuštění\n" " 11]*\n" "q či Q či Ukončení programu\n" "s Posun vpřed o k řádků [1]\n" "f Posun vpřed o k stran [1]\n" "b či ctrl-B Posun vzad o k stran [1]\n" -"' Přeskočí na místo, kde bylo zahájeno předchozí hledání\n" +"' Přeskočí na místo, kde bylo zahájeno předchozí " +"hledání\n" "= Zobrazí číslo aktuálního řádku\n" "/ Hledá k. výskyt regulárního výrazu [1]\n" "n Hledá k. výrazu posledního regulárního výrazu [1]\n" @@ -10087,7 +10287,8 @@ msgstr "" "ctrl-L Překreslí obrazovku\n" ":n Přeskočí na k. následující soubor [1]\n" ":p Přeskočí na k. předcházející soubor [1]\n" -":f Vypíše jméno aktuálního souboru a číslo aktuálního řádku\n" +":f Vypíše jméno aktuálního souboru a číslo aktuálního " +"řádku\n" ". Zopakuje předcházející příkaz\n" #: text-utils/more.c:1370 text-utils/more.c:1375 @@ -10208,8 +10409,11 @@ msgstr "hexdump: chybný znak v konverzi %%%s.\n" #: text-utils/pg.c:235 #, c-format -msgid "%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n" -msgstr "%s: Použití: %s [-ČÍSLO] [-p ŘETĚZEC] [-cefnrs] [+ŘÁDEK] [+/VZOREK/] [SOUBOR…]\n" +msgid "" +"%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n" +msgstr "" +"%s: Použití: %s [-ČÍSLO] [-p ŘETĚZEC] [-cefnrs] [+ŘÁDEK] [+/VZOREK/] " +"[SOUBOR…]\n" #: text-utils/pg.c:244 #, c-format @@ -10473,8 +10677,11 @@ msgstr "Nedostatek paměti pro rostoucí buffer.\n" #~ msgid "%s: cannot canonicalize %s: %s\n" #~ msgstr "%s: %s nelze převést na kanonický tvar: %s\n" -#~ msgid "usage: renice priority [ [ -p ] pids ] [ [ -g ] pgrps ] [ [ -u ] users ]\n" -#~ msgstr "Použití: renice priorita [ [ -p ] pid ] [[ -g ] pgrp ] [ [ -u ] uživatel ]\n" +#~ msgid "" +#~ "usage: renice priority [ [ -p ] pids ] [ [ -g ] pgrps ] [ [ -u ] users ]\n" +#~ msgstr "" +#~ "Použití: renice priorita [ [ -p ] pid ] [[ -g ] pgrp ] [ [ -u ] " +#~ "uživatel ]\n" #~ msgid "\t-%c\tEnable %s\n" #~ msgstr "\t-%c\tPovolí %s\n" @@ -10491,9 +10698,12 @@ msgstr "Nedostatek paměti pro rostoucí buffer.\n" #~ msgid "Password error." #~ msgstr "Chybné heslo." -#~ msgid "Exceeded MAXENTRIES. Raise this value in mkcramfs.c and recompile. Exiting.\n" +#~ msgid "" +#~ "Exceeded MAXENTRIES. Raise this value in mkcramfs.c and recompile. " +#~ "Exiting.\n" #~ msgstr "" -#~ "Překročeno MAXENTRIES. Zvětšete tuto hodnotu v mkcramfs.c a znovu přeložte.\n" +#~ "Překročeno MAXENTRIES. Zvětšete tuto hodnotu v mkcramfs.c a znovu " +#~ "přeložte.\n" #~ "Končím.\n" #~ msgid "Assuming pages of size %d (not %d)\n" @@ -10541,8 +10751,10 @@ msgstr "Nedostatek paměti pro rostoucí buffer.\n" #~ msgid "%s: error: the label %s occurs on both %s and %s\n" #~ msgstr "%s: chyba: jmenovka %s se nachází jak na %s tak i na %s\n" -#~ msgid "%s: could not open %s, so UUID and LABEL conversion cannot be done.\n" -#~ msgstr "%s: nelze otevřít %s, takže konverze UUID a JMENOVEK nebude provedena.\n" +#~ msgid "" +#~ "%s: could not open %s, so UUID and LABEL conversion cannot be done.\n" +#~ msgstr "" +#~ "%s: nelze otevřít %s, takže konverze UUID a JMENOVEK nebude provedena.\n" #~ msgid "%s: bad UUID" #~ msgstr "%s: chybné UUID" diff --git a/po/ja.po b/po/ja.po index 37255c80..cf917e12 100644 --- a/po/ja.po +++ b/po/ja.po @@ -409,7 +409,8 @@ msgstr "" #: disk-utils/fsck.minix.c:672 disk-utils/fsck.minix.c:723 #, c-format msgid "Inode %d marked unused, but used for file '%s'\n" -msgstr "Inode %d は不使用マークされていますが、ファイル '%s' が利用しています\n" +msgstr "" +"Inode %d は不使用マークされていますが、ファイル '%s' が利用しています\n" #: disk-utils/fsck.minix.c:676 disk-utils/fsck.minix.c:727 msgid "Mark in use" @@ -762,7 +763,8 @@ msgstr "%s の close でエラーが発生しました" #: disk-utils/mkfs.c:73 #, c-format msgid "Usage: mkfs [-V] [-t fstype] [fs-options] device [size]\n" -msgstr "使い方: mkfs [-V] [-t ファイルシステム型] [fs オプション] デバイス [サイズ]\n" +msgstr "" +"使い方: mkfs [-V] [-t ファイルシステム型] [fs オプション] デバイス [サイズ]\n" #: disk-utils/mkfs.c:88 disk-utils/mkfs.c:96 fdisk/cfdisk.c:351 #: getopt/getopt.c:91 getopt/getopt.c:101 login-utils/wall.c:246 @@ -778,7 +780,8 @@ msgstr "mkfs (%s)\n" #: disk-utils/mkfs.cramfs.c:124 #, c-format msgid "" -"usage: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname outfile\n" +"usage: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname " +"outfile\n" " -h print this help\n" " -v be verbose\n" " -E make all warnings errors (non-zero exit status)\n" @@ -792,14 +795,16 @@ msgid "" " dirname root of the filesystem to be compressed\n" " outfile output file\n" msgstr "" -"使い方: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname outfile\n" +"使い方: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname " +"outfile\n" " -h このヘルプを表示\n" " -v be verbose\n" " -E すべての警告をエラーとする (終了ステータスを 0 以外にする)\n" " -b blksize 指定したブロックサイズを利用する。\n" " ページサイズと同じである必要があります\n" " -e edition set edition number (part of fsid)\n" -" -i file ファイルシステム内にファイルイメージを挿入する (requires >= 2.4.0)\n" +" -i file ファイルシステム内にファイルイメージを挿入する (requires >= " +"2.4.0)\n" " -n name set name of cramfs filesystem\n" " -p pad by %d bytes for boot code\n" " -s ディレクトリエントリをソートする (古いオプション。無視されます)\n" @@ -814,7 +819,8 @@ msgid "" " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting.\n" msgstr "" "非常に長い (%zu バイト) ファイル名 `%s' が見つかりました。\n" -" mkcramfs.c 内の MAX_INPUT_NAMELEN を増やして再コンパイルしてください。終了します。\n" +" mkcramfs.c 内の MAX_INPUT_NAMELEN を増やして再コンパイルしてください。終了し" +"ます。\n" #: disk-utils/mkfs.cramfs.c:464 #, c-format @@ -833,7 +839,9 @@ msgstr "%6.2f%% (%+ld バイト)\t%s\n" #: disk-utils/mkfs.cramfs.c:829 #, c-format -msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB. We might die prematurely.\n" +msgid "" +"warning: guestimate of required size (upper bound) is %lldMB, but maximum " +"image size is %uMB. We might die prematurely.\n" msgstr "" #: disk-utils/mkfs.cramfs.c:856 @@ -896,12 +904,14 @@ msgstr "" #: disk-utils/mkfs.cramfs.c:933 #, c-format -msgid "warning: uids truncated to %u bits. (This may be a security concern.)\n" +msgid "" +"warning: uids truncated to %u bits. (This may be a security concern.)\n" msgstr "" #: disk-utils/mkfs.cramfs.c:938 #, c-format -msgid "warning: gids truncated to %u bits. (This may be a security concern.)\n" +msgid "" +"warning: gids truncated to %u bits. (This may be a security concern.)\n" msgstr "" #: disk-utils/mkfs.cramfs.c:943 @@ -1063,7 +1073,8 @@ msgstr "不正なユーザ指定ページサイズ %d\n" #: disk-utils/mkswap.c:156 #, fuzzy, c-format msgid "Using user-specified page size %d, instead of the system value %d\n" -msgstr "システムのページサイズ値 %2$d/%3$d の代わりに、ユーザ指定値 %1$d を使います\n" +msgstr "" +"システムのページサイズ値 %2$d/%3$d の代わりに、ユーザ指定値 %1$d を使います\n" #: disk-utils/mkswap.c:180 #, c-format @@ -1087,7 +1098,8 @@ msgstr "" #: disk-utils/mkswap.c:328 #, fuzzy, c-format -msgid "Usage: %s [-c] [-v0|-v1] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n" +msgid "" +"Usage: %s [-c] [-v0|-v1] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n" msgstr "使い方: %s [-c] [-v0|-v1] [-pページサイズ] /dev/name [ブロック数]\n" #: disk-utils/mkswap.c:351 @@ -1126,7 +1138,8 @@ msgstr "%s: エラー: スワップを有効にするための場所がない？ #: disk-utils/mkswap.c:593 #, c-format msgid "%s: error: size %lu KiB is larger than device size %lu KiB\n" -msgstr "%s: エラー: サイズ %lu KiB がデバイスのサイズ %lu KiB よりも大きいです\n" +msgstr "" +"%s: エラー: サイズ %lu KiB がデバイスのサイズ %lu KiB よりも大きいです\n" #: disk-utils/mkswap.c:614 #, c-format @@ -1344,12 +1357,16 @@ msgid "enlarged logical partitions overlap" msgstr "拡大された論理領域が重複しています" #: fdisk/cfdisk.c:999 -msgid "!!!! Internal error creating logical drive with no extended partition !!!!" -msgstr "!!!! 内部エラー。拡張領域以外に論理ドライブを作成しようとしています !!!!" +msgid "" +"!!!! Internal error creating logical drive with no extended partition !!!!" +msgstr "" +"!!!! 内部エラー。拡張領域以外に論理ドライブを作成しようとしています !!!!" #: fdisk/cfdisk.c:1010 fdisk/cfdisk.c:1022 -msgid "Cannot create logical drive here -- would create two extended partitions" -msgstr "ここには論理ドライブを作成できません -- 2 つの拡張領域であれば作成します" +msgid "" +"Cannot create logical drive here -- would create two extended partitions" +msgstr "" +"ここには論理ドライブを作成できません -- 2 つの拡張領域であれば作成します" #: fdisk/cfdisk.c:1164 msgid "Menu item too long. Menu may look odd." @@ -1455,8 +1472,11 @@ msgid "Opened disk read-only - you have no permission to write" msgstr "ディスクを読込み専用で開きました -- あなたには書込み権限がありません" #: fdisk/cfdisk.c:1682 -msgid "Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted." -msgstr "警告!! サポートしていない GPT (GUID パーティションテーブル) を検出しました。GNU Parded を使ってください" +msgid "" +"Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted." +msgstr "" +"警告!! サポートしていない GPT (GUID パーティションテーブル) を検出しました。" +"GNU Parded を使ってください" #: fdisk/cfdisk.c:1699 msgid "Cannot get disk size" @@ -1475,8 +1495,10 @@ msgid "Warning!! This may destroy data on your disk!" msgstr "警告！ これはあなたのディスクにあるデータを破壊するかもしれません" #: fdisk/cfdisk.c:1874 -msgid "Are you sure you want to write the partition table to disk? (yes or no): " -msgstr "パーティション領域をディスクに書き込んでもよろしいですか？(yes または no): " +msgid "" +"Are you sure you want to write the partition table to disk? (yes or no): " +msgstr "" +"パーティション領域をディスクに書き込んでもよろしいですか？(yes または no): " #: fdisk/cfdisk.c:1880 msgid "no" @@ -1503,16 +1525,22 @@ msgid "Wrote partition table to disk" msgstr "領域テーブルをディスクに書き込みました" #: fdisk/cfdisk.c:1919 -msgid "Wrote partition table, but re-read table failed. Reboot to update table." -msgstr "領域テーブルを書き込みましたが、再読込みに失敗。再起動して更新してください" +msgid "" +"Wrote partition table, but re-read table failed. Reboot to update table." +msgstr "" +"領域テーブルを書き込みましたが、再読込みに失敗。再起動して更新してください" #: fdisk/cfdisk.c:1929 msgid "No primary partitions are marked bootable. DOS MBR cannot boot this." -msgstr "ブート可能マーク付き基本領域がありません。DOS MBR はこれをブートできません。" +msgstr "" +"ブート可能マーク付き基本領域がありません。DOS MBR はこれをブートできません。" #: fdisk/cfdisk.c:1931 -msgid "More than one primary partition is marked bootable. DOS MBR cannot boot this." -msgstr "ブート可能マーク付き基本領域が複数あります。DOS MBR はこれをブートできません。" +msgid "" +"More than one primary partition is marked bootable. DOS MBR cannot boot this." +msgstr "" +"ブート可能マーク付き基本領域が複数あります。DOS MBR はこれをブートできませ" +"ん。" #: fdisk/cfdisk.c:1989 fdisk/cfdisk.c:2108 fdisk/cfdisk.c:2192 msgid "Enter filename or press RETURN to display on screen: " @@ -1582,12 +1610,20 @@ msgid " First Last\n" msgstr " 最初の 最後の\n" #: fdisk/cfdisk.c:2130 -msgid " # Type Sector Sector Offset Length Filesystem Type (ID) Flag\n" -msgstr " # 領域 セクタ セクタ オフセット 大きさ Filesystemタイプ(ID) フラグ\n" +msgid "" +" # Type Sector Sector Offset Length Filesystem Type (ID) " +"Flag\n" +msgstr "" +" # 領域 セクタ セクタ オフセット 大きさ Filesystemタイプ(ID) フ" +"ラグ\n" #: fdisk/cfdisk.c:2131 -msgid "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n" -msgstr "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n" +msgid "" +"-- ------- ----------- ----------- ------ ----------- -------------------- " +"----\n" +msgstr "" +"-- ------- ----------- ----------- ------ ----------- -------------------- " +"----\n" #: fdisk/cfdisk.c:2214 msgid " ---Starting---- ----Ending----- Start Number of\n" @@ -1599,7 +1635,8 @@ msgstr " # Flags Head Sect Cyl ID Head Sect Cyl セクタ番号 セクタ #: fdisk/cfdisk.c:2216 msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n" -msgstr "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n" +msgstr "" +"-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n" #: fdisk/cfdisk.c:2249 msgid "Raw" @@ -2365,7 +2402,8 @@ msgstr "セクタ/シリンダ" #: fdisk/fdiskbsdlabel.c:481 #, c-format msgid "Must be <= sectors/track * tracks/cylinder (default).\n" -msgstr "デフォルトで sectors/track * tracks/cylinder 以下でなければならない。\n" +msgstr "" +"デフォルトで sectors/track * tracks/cylinder 以下でなければならない。\n" #: fdisk/fdiskbsdlabel.c:483 msgid "rpm" @@ -2730,7 +2768,8 @@ msgid "" "After that, of course, the previous content won't be recoverable.\n" "\n" msgstr "" -"新たに DOS ディスクラベルを作成します。あなたが書き込みを決定するまで、変更は\n" +"新たに DOS ディスクラベルを作成します。あなたが書き込みを決定するまで、変更" +"は\n" "メモリ内だけに残します。その後はもちろん以前の内容は修復不可能になります。\n" #: fdisk/fdisk.c:843 @@ -2752,7 +2791,9 @@ msgstr "" #: fdisk/fdisk.c:1017 #, c-format -msgid "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel\n" +msgid "" +"Device contains neither a valid DOS partition table, nor Sun, SGI or OSF " +"disklabel\n" msgstr "" "デバイスは正常な DOS 領域テーブルも、Sun, SGI や OSF ディスクラベルも\n" "含んでいません\n" @@ -2769,7 +2810,9 @@ msgstr "特別な拡張領域 %d を無視します\n" #: fdisk/fdisk.c:1059 #, c-format -msgid "Warning: invalid flag 0x%04x of partition table %d will be corrected by w(rite)\n" +msgid "" +"Warning: invalid flag 0x%04x of partition table %d will be corrected by w" +"(rite)\n" msgstr "" "警告: 領域テーブル %2$d の不正なフラグ 0x%1$04x は w(書き込み)によって\n" "正常になります\n" @@ -3278,11 +3321,13 @@ msgstr "警告: DOS 互換のためのセクタオフセットを設定します #, c-format msgid "" "\n" -"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't support GPT. Use GNU Parted.\n" +"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't " +"support GPT. Use GNU Parted.\n" "\n" msgstr "" "\n" -"警告: GPT (GUID パーティションテーブル) が '%s' に検出されました! この fdisk ユーティリティは GPT をサポートしません。GNU Parted を使ってください。\n" +"警告: GPT (GUID パーティションテーブル) が '%s' に検出されました! この fdisk " +"ユーティリティは GPT をサポートしません。GNU Parted を使ってください。\n" "\n" #: fdisk/fdisk.c:2512 @@ -3308,11 +3353,14 @@ msgstr "%c: 不明なコマンド\n" #: fdisk/fdisk.c:2631 #, c-format msgid "This kernel finds the sector size itself - -b option ignored\n" -msgstr "このカーネルはセクタサイズを自分認識します -- -b オプションは無視します\n" +msgstr "" +"このカーネルはセクタサイズを自分認識します -- -b オプションは無視します\n" #: fdisk/fdisk.c:2635 #, c-format -msgid "Warning: the -b (set sector size) option should be used with one specified device\n" +msgid "" +"Warning: the -b (set sector size) option should be used with one specified " +"device\n" msgstr "" "警告: -b (セクタサイズ設定) オプションは 1 つのデバイス指定と共に\n" "使用されるべきです\n" @@ -3320,7 +3368,8 @@ msgstr "" #: fdisk/fdisk.c:2695 #, c-format msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n" -msgstr "%s でOSF/1 ディスクラベルを検出したので、ディスクラベルモードに移行します。\n" +msgstr "" +"%s でOSF/1 ディスクラベルを検出したので、ディスクラベルモードに移行します。\n" #: fdisk/fdisk.c:2705 msgid "Command (m for help): " @@ -3451,7 +3500,9 @@ msgstr "Linux RAID" #: fdisk/fdisksgilabel.c:164 #, c-format -msgid "According to MIPS Computer Systems, Inc the Label must not contain more than 512 bytes\n" +msgid "" +"According to MIPS Computer Systems, Inc the Label must not contain more than " +"512 bytes\n" msgstr "" "MIPS Computer Systems, Inc によると、そのラベルは 512 バイト以上でなければ\n" "なりません\n" @@ -3736,7 +3787,8 @@ msgstr "" #: fdisk/fdisksgilabel.c:730 fdisk/fdisksunlabel.c:226 #, c-format msgid "" -"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %d.\n" +"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %" +"d.\n" "This value may be truncated for devices > 33.8 GB.\n" msgstr "" @@ -3828,7 +3880,8 @@ msgstr "間違ったチェックサム値の sgi ディスクラベルを検出 #: fdisk/fdisksunlabel.c:168 #, fuzzy, c-format -msgid "Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n" +msgid "" +"Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n" msgstr "" "警告: 領域テーブル %2$d の不正なフラグ 0x%1$04x は w(書き込み)によって\n" "正常になります\n" @@ -4388,7 +4441,8 @@ msgstr "パーティション復元ファイル (%s) の情報を取得できま #: fdisk/sfdisk.c:355 msgid "partition restore file has wrong size - not restoring\n" -msgstr "パーティション復元ファイルのサイズが間違っています -- 復元を行ないません\n" +msgstr "" +"パーティション復元ファイルのサイズが間違っています -- 復元を行ないません\n" #: fdisk/sfdisk.c:359 msgid "out of memory?\n" @@ -4431,7 +4485,8 @@ msgid "" "the entire disk. Using fdisk on it is probably meaningless.\n" "[Use the --force option if you really want this]\n" msgstr "" -"警告: start=%lu -- この値はパーティションではなくディスクそのもののようです。\n" +"警告: start=%lu -- この値はパーティションではなくディスクそのもののようで" +"す。\n" "ここに fdisk を利用するのは多分意味がないことです。\n" "[本当にこれを行ないたければ、--force オプションを使ってください]\n" @@ -4471,18 +4526,29 @@ msgstr "" #: fdisk/sfdisk.c:607 #, c-format -msgid "%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n" -msgstr "パーティション %2$s のヘッド数として %1$s は不可能です: %3$lu (0-%4$lu にしてください)\n" +msgid "" +"%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n" +msgstr "" +"パーティション %2$s のヘッド数として %1$s は不可能です: %3$lu (0-%4$lu にして" +"ください)\n" #: fdisk/sfdisk.c:612 #, c-format -msgid "%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)\n" -msgstr "パーティション %2$s のセクタ数として %1$s は不可能です: %3$lu (1-%4$lu にしてください)\n" +msgid "" +"%s of partition %s has impossible value for sector: %lu (should be in 1-%" +"lu)\n" +msgstr "" +"パーティション %2$s のセクタ数として %1$s は不可能です: %3$lu (1-%4$lu にして" +"ください)\n" #: fdisk/sfdisk.c:617 #, c-format -msgid "%s of partition %s has impossible value for cylinders: %lu (should be in 0-%lu)\n" -msgstr "パーティション %2$s のシリンダ数として %1$s は不可能です: %3$lu (0-%4$lu にしてください)\n" +msgid "" +"%s of partition %s has impossible value for cylinders: %lu (should be in 0-%" +"lu)\n" +msgstr "" +"パーティション %2$s のシリンダ数として %1$s は不可能です: %3$lu (0-%4$lu にし" +"てください)\n" #: fdisk/sfdisk.c:657 #, c-format @@ -4652,7 +4718,8 @@ msgstr "変です、%d つのパーティションしか定義されていませ #: fdisk/sfdisk.c:1203 #, c-format msgid "Warning: partition %s has size 0 but is not marked Empty\n" -msgstr "警告: パーティション %s はサイズ 0 ですが、空としてマークされていません\n" +msgstr "" +"警告: パーティション %s はサイズ 0 ですが、空としてマークされていません\n" #: fdisk/sfdisk.c:1206 #, c-format @@ -4753,8 +4820,10 @@ msgstr "開始" #: fdisk/sfdisk.c:1347 #, c-format -msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" -msgstr "パーティション %s: 始点: (c,h,s) 期待値 (%ld,%ld,%ld) (%ld,%ld,%ld) を発見\n" +msgid "" +"partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" +msgstr "" +"パーティション %s: 始点: (c,h,s) 期待値 (%ld,%ld,%ld) (%ld,%ld,%ld) を発見\n" #: fdisk/sfdisk.c:1353 msgid "end" @@ -4763,12 +4832,15 @@ msgstr "終了" #: fdisk/sfdisk.c:1356 #, c-format msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" -msgstr "パーティション %s: 終点: (c,h,s) 期待値 (%ld,%ld,%ld) (%ld,%ld,%ld) を発見\n" +msgstr "" +"パーティション %s: 終点: (c,h,s) 期待値 (%ld,%ld,%ld) (%ld,%ld,%ld) を発見\n" #: fdisk/sfdisk.c:1359 #, c-format msgid "partition %s ends on cylinder %ld, beyond the end of the disk\n" -msgstr "シリンダ %2$ld にあるパーティション %1$s の終点はディスクの最後を越えています\n" +msgstr "" +"シリンダ %2$ld にあるパーティション %1$s の終点はディスクの最後を越えていま" +"す\n" #: fdisk/sfdisk.c:1384 #, c-format @@ -4880,7 +4952,8 @@ msgstr "不正なタイプ\n" #: fdisk/sfdisk.c:2105 #, c-format msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n" -msgstr "警告: 与えられたサイズ (%lu) は、許容できる最大サイズ (%lu) を越えています\n" +msgstr "" +"警告: 与えられたサイズ (%lu) は、許容できる最大サイズ (%lu) を越えています\n" #: fdisk/sfdisk.c:2111 msgid "Warning: empty partition\n" @@ -4917,7 +4990,8 @@ msgid "" " \n" "Usually you only need to specify and (and perhaps ).\n" msgstr "" -"以下の書式で入力して下さい -- 指定しなかったフィールドには初期値をセットします\n" +"以下の書式で入力して下さい -- 指定しなかったフィールドには初期値をセットしま" +"す\n" " \n" "普通は と (そして恐らく )を指定するだけで構いません。\n" @@ -4955,8 +5029,11 @@ msgid " -i [or --increment]: number cylinders etc. from 1 instead of from 0" msgstr " -i [or --increment]: シリンダ数など。0 ではなく 1 から" #: fdisk/sfdisk.c:2300 -msgid " -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/MB" -msgstr " -uS, -uB, -uC, -uM: セクタ/ブロック/シリンダ/MB のユニットの受理/報告" +msgid "" +" -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/" +"MB" +msgstr "" +" -uS, -uB, -uC, -uM: セクタ/ブロック/シリンダ/MB のユニットの受理/報告" #: fdisk/sfdisk.c:2301 msgid " -T [or --list-types]:list the known partition types" @@ -4979,7 +5056,8 @@ msgid " -n : do not actually write to disk" msgstr " -n : ディスクへの実際の書込みを行わない" #: fdisk/sfdisk.c:2306 -msgid " -O file : save the sectors that will be overwritten to file" +msgid "" +" -O file : save the sectors that will be overwritten to file" msgstr " -O file : 上書きされるセクタをファイルに保存する" #: fdisk/sfdisk.c:2307 @@ -5003,8 +5081,12 @@ msgid " -g [or --show-geometry]: print the kernel's idea of the geometry" msgstr " -g [or --show-geometry]: カーネルのジオメトリ情報を表示する" #: fdisk/sfdisk.c:2312 -msgid " -G [or --show-pt-geometry]: print geometry guessed from the partition table" -msgstr " -G [or --show-pt-geometry]: 領域テーブルから推測されるジオメトリ情報を表示する" +msgid "" +" -G [or --show-pt-geometry]: print geometry guessed from the partition " +"table" +msgstr "" +" -G [or --show-pt-geometry]: 領域テーブルから推測されるジオメトリ情報を表" +"示する" #: fdisk/sfdisk.c:2313 msgid "" @@ -5015,7 +5097,8 @@ msgstr "" " またはそれらの記述子の入力を得る" #: fdisk/sfdisk.c:2315 -msgid " -L [or --Linux]: do not complain about things irrelevant for Linux" +msgid "" +" -L [or --Linux]: do not complain about things irrelevant for Linux" msgstr " -L [or --Linux]: Linux にそぐわなくても文句を云わない" #: fdisk/sfdisk.c:2316 @@ -5058,7 +5141,8 @@ msgstr "%s デバイス\t\t デバイス上のアクティブ領域をリスト #: fdisk/sfdisk.c:2330 #, c-format msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n" -msgstr "%s デバイス n1 n2 ... n1 をアクティブにして..., 残りを非アクティブにします\n" +msgstr "" +"%s デバイス n1 n2 ... n1 をアクティブにして..., 残りを非アクティブにします\n" #: fdisk/sfdisk.c:2331 #, c-format @@ -5069,7 +5153,8 @@ msgstr "%s -An デバイス\t n をアクティヴにし、それ以外を非ア #, c-format msgid "" "\n" -"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk doesn't support GPT. Use GNU Parted.\n" +"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk " +"doesn't support GPT. Use GNU Parted.\n" "\n" msgstr "" @@ -5298,15 +5383,18 @@ msgstr " getopt [オプション] [--] オプション文字列 値\n" #: getopt/getopt.c:328 msgid " getopt [options] -o|--options optstring [options] [--]\n" -msgstr " getopt [オプション] -o|--options オプション文字列 [オプション] [--]\n" +msgstr "" +" getopt [オプション] -o|--options オプション文字列 [オプション] [--]\n" #: getopt/getopt.c:329 msgid " parameters\n" msgstr " 値\n" #: getopt/getopt.c:330 -msgid " -a, --alternative Allow long options starting with single -\n" -msgstr " -a, --alternative ロングオプションが - 一つで始まるのを許す\n" +msgid "" +" -a, --alternative Allow long options starting with single -\n" +msgstr "" +" -a, --alternative ロングオプションが - 一つで始まるのを許す\n" #: getopt/getopt.c:331 msgid " -h, --help This small usage guide\n" @@ -5317,7 +5405,8 @@ msgid " -l, --longoptions=longopts Long options to be recognized\n" msgstr " -l, --longoptions=longopts ロングオプションを理解させる\n" #: getopt/getopt.c:333 -msgid " -n, --name=progname The name under which errors are reported\n" +msgid "" +" -n, --name=progname The name under which errors are reported\n" msgstr " -n, --name=progname エラー報告の際の名前\n" #: getopt/getopt.c:334 @@ -5466,7 +5555,8 @@ msgstr "ハードウェア時計に不正な値: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n" #: hwclock/hwclock.c:416 #, c-format msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n" -msgstr "ハードウェア時計時刻 : %4d/%.2d/%.2d %.2d:%.2d:%.2d = 1969 年以来 %ld 秒\n" +msgstr "" +"ハードウェア時計時刻 : %4d/%.2d/%.2d %.2d:%.2d:%.2d = 1969 年以来 %ld 秒\n" #: hwclock/hwclock.c:444 #, c-format @@ -5494,7 +5584,9 @@ msgstr "" #: hwclock/hwclock.c:559 #, c-format -msgid "The Hardware Clock registers contain values that are either invalid (e.g. 50th day of month) or beyond the range we can handle (e.g. Year 2095).\n" +msgid "" +"The Hardware Clock registers contain values that are either invalid (e.g. " +"50th day of month) or beyond the range we can handle (e.g. Year 2095).\n" msgstr "" "ハードウェア時計レジスタがおかしな値(例 何月50日)になっているか、\n" "捕捉できない範囲の値(例 2095年)になっています。\n" @@ -5557,7 +5649,8 @@ msgstr "" #: hwclock/hwclock.c:650 #, c-format msgid "" -"The date command issued by %s returned something other than an integer where the converted time value was expected.\n" +"The date command issued by %s returned something other than an integer where " +"the converted time value was expected.\n" "The command was:\n" " %s\n" "The response was:\n" @@ -5577,7 +5670,9 @@ msgstr "date 文字列 %s を 1969 年以来 %ld 秒とします\n" #: hwclock/hwclock.c:693 #, c-format -msgid "The Hardware Clock does not contain a valid time, so we cannot set the System Time from it.\n" +msgid "" +"The Hardware Clock does not contain a valid time, so we cannot set the " +"System Time from it.\n" msgstr "" "ハードウェア時計は、正しい時刻を含んでいないので、ここから得られた値を\n" "システム時刻に設定できません。\n" @@ -5613,7 +5708,9 @@ msgstr "settimeofday() 呼び出しに失敗" #: hwclock/hwclock.c:763 #, c-format -msgid "Not adjusting drift factor because the Hardware Clock previously contained garbage.\n" +msgid "" +"Not adjusting drift factor because the Hardware Clock previously contained " +"garbage.\n" msgstr "ハードウェア時刻に以前のゴミが含まれており、ずれを修正できません。\n" #: hwclock/hwclock.c:768 @@ -5625,16 +5722,20 @@ msgstr "前回の調整以来、少なくとも一日経過しないと、ずれ #: hwclock/hwclock.c:774 #, c-format -msgid "Not adjusting drift factor because it has been less than a day since the last calibration.\n" +msgid "" +"Not adjusting drift factor because it has been less than a day since the " +"last calibration.\n" msgstr "前回の調整以来、少なくとも一日経過しないと、ずれを修正できません。\n" #: hwclock/hwclock.c:822 #, fuzzy, c-format msgid "" -"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor of %f seconds/day.\n" +"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor " +"of %f seconds/day.\n" "Adjusting drift factor by %f seconds/day\n" msgstr "" -"過去 %2$d 秒の間に、一日あたり %3$f 秒ずらしているのですが、クロックが %1$.1f 秒ずれました。\n" +"過去 %2$d 秒の間に、一日あたり %3$f 秒ずらしているのですが、クロックが %1" +"$.1f 秒ずれました。\n" "一日あたり %4$f 秒ずれを修正します\n" #: hwclock/hwclock.c:872 @@ -5668,7 +5769,8 @@ msgstr "ずれの修正値は更新されませんでした。\n" #: hwclock/hwclock.c:969 #, c-format -msgid "The Hardware Clock does not contain a valid time, so we cannot adjust it.\n" +msgid "" +"The Hardware Clock does not contain a valid time, so we cannot adjust it.\n" msgstr "ハードウェア時計が、正常な時刻を含んでいないので、修正できません。\n" #: hwclock/hwclock.c:1000 @@ -5694,7 +5796,8 @@ msgstr "システムクロックを設定できません。\n" #: hwclock/hwclock.c:1156 #, c-format msgid "" -"The kernel keeps an epoch value for the Hardware Clock only on an Alpha machine.\n" +"The kernel keeps an epoch value for the Hardware Clock only on an Alpha " +"machine.\n" "This copy of hwclock was built for a machine other than Alpha\n" "(and thus is presumably not running on an Alpha now). No action taken.\n" msgstr "" @@ -5715,7 +5818,9 @@ msgstr "カーネルはエポック値を %lu と想定しています\n" #: hwclock/hwclock.c:1170 #, c-format -msgid "To set the epoch value, you must use the 'epoch' option to tell to what value to set it.\n" +msgid "" +"To set the epoch value, you must use the 'epoch' option to tell to what " +"value to set it.\n" msgstr "" "エポック値を設定するためには、何の値を設定するかを知らせるために 'epoch'\n" "オプションを使わなければなりません。\n" @@ -5779,10 +5884,12 @@ msgstr "" " --set --date で与えられた時刻を rtc に設定する\n" " --hctosys システム時刻をハードウェア時計に合わせる\n" " --systohc ハードウェア時計を現在のシステム時刻に合わせる\n" -" --adjust 時計が最後に設定または調整された時点から、システム的なずれを\n" +" --adjust 時計が最後に設定または調整された時点から、システム的なずれ" +"を\n" " 計算して rtc を調整する\n" " --getepoch カーネルのハードウェア時刻のエポック値を表示する\n" -" --setepoch カーネルのハードウェア時刻のエポック値を --epoch として与え\n" +" --setepoch カーネルのハードウェア時刻のエポック値を --epoch として与" +"え\n" " られた値に設定する\n" " --version hwclock のバージョンを標準出力に表示する\n" "\n" @@ -5796,7 +5903,8 @@ msgstr "" " --epoch=year ハードウェア時計のエポック値の起源に指定する年\n" " --noadjfile /etc/adjtime にアクセスしない。--utc 又は --localtime\n" " のいずれかの使用を必要とする\n" -" --adjfile=パス adjust ファイルのパスを指定する (デフォルトは /etc/adjtime)\n" +" --adjfile=パス adjust ファイルのパスを指定する (デフォルトは /etc/" +"adjtime)\n" #: hwclock/hwclock.c:1240 #, c-format @@ -5828,23 +5936,37 @@ msgstr "" #: hwclock/hwclock.c:1454 #, c-format -msgid "%s: The --utc and --localtime options are mutually exclusive. You specified both.\n" -msgstr "%s: --utc と --localtime オプションは相互排他的ですが、両方が指定されました。\n" +msgid "" +"%s: The --utc and --localtime options are mutually exclusive. You specified " +"both.\n" +msgstr "" +"%s: --utc と --localtime オプションは相互排他的ですが、両方が指定されまし" +"た。\n" #: hwclock/hwclock.c:1461 #, c-format -msgid "%s: The --adjust and --noadjfile options are mutually exclusive. You specified both.\n" -msgstr "%s: --adjust と --noadjfile オプションは相互排他的ですが、両方が指定されました。\n" +msgid "" +"%s: The --adjust and --noadjfile options are mutually exclusive. You " +"specified both.\n" +msgstr "" +"%s: --adjust と --noadjfile オプションは相互排他的ですが、両方が指定されまし" +"た。\n" #: hwclock/hwclock.c:1468 #, c-format -msgid "%s: The --adjfile and --noadjfile options are mutually exclusive. You specified both.\n" -msgstr "%s: --adjfile と --noadjfile オプションは相互排他的ですが、両方が指定されました。\n" +msgid "" +"%s: The --adjfile and --noadjfile options are mutually exclusive. You " +"specified both.\n" +msgstr "" +"%s: --adjfile と --noadjfile オプションは相互排他的ですが、両方が指定されまし" +"た。\n" #: hwclock/hwclock.c:1477 #, c-format msgid "%s: With --noadjfile, you must specify either --utc or --localtime\n" -msgstr "%s: --noadjfile をつけた場合、--utc か --localtime のいずれかを指定しなければなりません\n" +msgstr "" +"%s: --noadjfile をつけた場合、--utc か --localtime のいずれかを指定しなければ" +"なりません\n" #: hwclock/hwclock.c:1491 #, c-format @@ -5854,7 +5976,8 @@ msgstr "有効な設定時刻がありません。クロックを設定できま #: hwclock/hwclock.c:1507 #, c-format msgid "Sorry, only the superuser can change the Hardware Clock.\n" -msgstr "残念ながら、ハードウェアク時計の変更はスーパーユーザでしか行なえません。\n" +msgstr "" +"残念ながら、ハードウェアク時計の変更はスーパーユーザでしか行なえません。\n" #: hwclock/hwclock.c:1512 #, c-format @@ -5863,7 +5986,9 @@ msgstr "残念ながら、システム時計の変更はスーパーユーザで #: hwclock/hwclock.c:1517 #, c-format -msgid "Sorry, only the superuser can change the Hardware Clock epoch in the kernel.\n" +msgid "" +"Sorry, only the superuser can change the Hardware Clock epoch in the " +"kernel.\n" msgstr "" "残念ながら、カーネル内のハードウェア時計のエポック値を変更できるのは、\n" "スーパーユーザだけです。\n" @@ -5875,7 +6000,9 @@ msgstr "既知のどんな方法でも、ハードウェア時計にアクセス #: hwclock/hwclock.c:1541 #, c-format -msgid "Use the --debug option to see the details of our search for an access method.\n" +msgid "" +"Use the --debug option to see the details of our search for an access " +"method.\n" msgstr "--debug オプションでアクセス方法検索の詳細について見てください。\n" #: hwclock/kd.c:55 @@ -5956,7 +6083,8 @@ msgstr "割り込み更新をオフにするための %s への ioctl() が失 #: hwclock/rtc.c:285 #, c-format msgid "ioctl() to %s to turn on update interrupts failed unexpectedly" -msgstr "割り込み更新をオンにするための %s への ioctl() が予期せぬ失敗に終わりました" +msgstr "" +"割り込み更新をオンにするための %s への ioctl() が予期せぬ失敗に終わりました" #: hwclock/rtc.c:344 #, c-format @@ -5975,7 +6103,10 @@ msgstr "%s のオープンに失敗しました" #: hwclock/rtc.c:397 hwclock/rtc.c:443 #, c-format -msgid "To manipulate the epoch value in the kernel, we must access the Linux 'rtc' device driver via the device special file %s. This file does not exist on this system.\n" +msgid "" +"To manipulate the epoch value in the kernel, we must access the Linux 'rtc' " +"device driver via the device special file %s. This file does not exist on " +"this system.\n" msgstr "" "カーネル内のエポック値を算出するには、スペシャルファイル %s を通じて\n" "Linux の 'rtc' デバイスドライバにアクセスする必要があります。しかし、この\n" @@ -5994,21 +6125,25 @@ msgstr "%s への ioctl(RTC_EPOCH_READ) が失敗しました" #: hwclock/rtc.c:415 #, c-format msgid "we have read epoch %ld from %s with RTC_EPOCH_READ ioctl.\n" -msgstr "%2$s から RTC_EPOCH_READ ioctl によってエポック %1$ld を読み取りました。\n" +msgstr "" +"%2$s から RTC_EPOCH_READ ioctl によってエポック %1$ld を読み取りました。\n" #: hwclock/rtc.c:435 #, c-format msgid "The epoch value may not be less than 1900. You requested %ld\n" -msgstr "エポック値は 1900 年以前ではあり得ません。あなたは %ld を要求しました\n" +msgstr "" +"エポック値は 1900 年以前ではあり得ません。あなたは %ld を要求しました\n" #: hwclock/rtc.c:453 #, c-format msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n" -msgstr "%2$s から RTC_EPOCH_READ ioctl によってエポック %1$ld を読み取りました。\n" +msgstr "" +"%2$s から RTC_EPOCH_READ ioctl によってエポック %1$ld を読み取りました。\n" #: hwclock/rtc.c:458 #, c-format -msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n" +msgid "" +"The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n" msgstr "%s のカーネルドライバは RTC_EPOCH_SET ioctl を持っていません。\n" #: hwclock/rtc.c:461 @@ -6087,11 +6222,15 @@ msgstr "%s: 入力が溢れました" #: login-utils/agetty.c:1203 #, c-format msgid "" -"Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n" -"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n" +"Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H " +"login_host] baud_rate,... line [termtype]\n" +"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] " +"line baud_rate,... [termtype]\n" msgstr "" -"使い方: %s [-8hiLmUw] [-l ログインプログラム] [-t タイムアウト] [-I 初期化文字列] [-H ログインホスト] ボーレート,... 行 [端末タイプ]\n" -"又は\t[-hiLmw] [-l ログインプログラム] [-t タイムアウト [-I 初期化文字列] [-H ログインホスト] 行 ボーレート,... [端末タイプ]\n" +"使い方: %s [-8hiLmUw] [-l ログインプログラム] [-t タイムアウト] [-I 初期化文" +"字列] [-H ログインホスト] ボーレート,... 行 [端末タイプ]\n" +"又は\t[-hiLmw] [-l ログインプログラム] [-t タイムアウト [-I 初期化文字列] [-" +"H ログインホスト] 行 ボーレート,... [端末タイプ]\n" #: login-utils/checktty.c:91 login-utils/checktty.c:112 #, c-format @@ -6129,7 +6268,8 @@ msgstr "%s: ユーザ \"%s\" は存在しません。\n" #: login-utils/chfn.c:145 login-utils/chsh.c:131 #, c-format msgid "%s: can only change local entries; use yp%s instead.\n" -msgstr "%s: ローカルの項目しか変更できません -- かわりに yp%s を使いましょう。\n" +msgstr "" +"%s: ローカルの項目しか変更できません -- かわりに yp%s を使いましょう。\n" #: login-utils/chfn.c:156 login-utils/chsh.c:142 msgid "Unknown user context" @@ -6234,13 +6374,17 @@ msgstr "%s: \"%s\" は /etc/shells リストの中にありません。\n" #: login-utils/chsh.c:164 #, c-format -msgid "%s: Running UID doesn't match UID of user we're altering, shell change denied\n" +msgid "" +"%s: Running UID doesn't match UID of user we're altering, shell change " +"denied\n" msgstr "" #: login-utils/chsh.c:170 #, c-format msgid "%s: Your shell is not in /etc/shells, shell change denied\n" -msgstr "%s: あなたのシェルは /etc/shells にありませんので、シェルの変更が拒否されました\n" +msgstr "" +"%s: あなたのシェルは /etc/shells にありませんので、シェルの変更が拒否されまし" +"た\n" #: login-utils/chsh.c:177 #, c-format @@ -7082,8 +7226,11 @@ msgstr "logger: 不明な優先度: %s.\n" #: misc-utils/logger.c:285 #, c-format -msgid "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n" -msgstr "使い方: logger [-is] [-f ファイル] [-p 優先度] [-t タグ] [-u ソケット] [ メッセージ ... ]\n" +msgid "" +"usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n" +msgstr "" +"使い方: logger [-is] [-f ファイル] [-p 優先度] [-t タグ] [-u ソケット] [ メッ" +"セージ ... ]\n" #: misc-utils/look.c:351 #, c-format @@ -7730,7 +7877,8 @@ msgid "" "%s: Could not find any loop device. Maybe this kernel does not know\n" " about the loop device? (If so, recompile or `modprobe loop'.)" msgstr "" -"%s: loop デバイスが全く見つかりません。カーネルが loop デバイスをサポートしていないかもしれません。\n" +"%s: loop デバイスが全く見つかりません。カーネルが loop デバイスをサポートして" +"いないかもしれません。\n" " (そうであれば、再コンパイルするか `insmod loop.o' して下さい。)" #: mount/lomount.c:611 @@ -7789,7 +7937,8 @@ msgid "" " %1$s -a | --all list all used\n" " %1$s -d | --detach delete\n" " %1$s -f | --find find unused\n" -" %1$s -j | --associated [-o ] list all associated with \n" +" %1$s -j | --associated [-o ] list all associated with " +"\n" " %1$s [ options ] {-f|--find|loopdev} setup\n" msgstr "" "\n" @@ -7836,7 +7985,9 @@ msgstr "%s: %s: デバイスを使用中です" #: mount/lomount.c:1055 #, c-format msgid "No loop support was available at compile time. Please recompile.\n" -msgstr "コンパイル時に loop サポートが有効になっていません。再コンパイルしてください。\n" +msgstr "" +"コンパイル時に loop サポートが有効になっていません。再コンパイルしてくださ" +"い。\n" #: mount/mount.c:317 #, c-format @@ -7995,7 +8146,8 @@ msgid "mount: according to mtab, %s is already mounted on %s\n" msgstr "mount: mtab によると、%s は %s にマウント済です\n" #: mount/mount.c:1195 -msgid "mount: I could not determine the filesystem type, and none was specified" +msgid "" +"mount: I could not determine the filesystem type, and none was specified" msgstr "mount: none が指定されましたが、ファイルシステムタイプを決定できません" #: mount/mount.c:1198 @@ -8152,7 +8304,8 @@ msgstr "" #: mount/mount.c:1343 #, c-format msgid "mount: %s is not a block device (maybe try `-o loop'?)" -msgstr "mount: %s はブロックデバイスではありません (多分 `-o loop' とやってみたら？)" +msgstr "" +"mount: %s はブロックデバイスではありません (多分 `-o loop' とやってみたら？)" #: mount/mount.c:1346 #, c-format @@ -8357,7 +8510,8 @@ msgid "" msgstr "" "\n" "使い方:\n" -" %1$s -a [-e] [-v] /etc/fstab 内で指定したスワップを有効にする\n" +" %1$s -a [-e] [-v] /etc/fstab 内で指定したスワップを有効にす" +"る\n" " %1$s [-p priority] [-v] 指定されたスワップを有効にする\n" " %1$s -s スワップの使用状況を表示\n" " %1$s -h ヘルプの表示\n" @@ -8411,7 +8565,9 @@ msgstr "%s: %s の状態取得ができません: %s\n" #: mount/swapon.c:268 #, c-format msgid "%s: %s: software suspend data detected. Reinitializing the swap.\n" -msgstr "%s: %s: ソフトウェアサスペンドデータを検出しました。スワップを再初期化します\n" +msgstr "" +"%s: %s: ソフトウェアサスペンドデータを検出しました。スワップを再初期化しま" +"す\n" #: mount/swapon.c:281 #, c-format @@ -8568,7 +8724,8 @@ msgstr "umount: %s は複数マウントされているようです" #: mount/umount.c:524 #, c-format msgid "umount: %s is not in the fstab (and you are not root)" -msgstr "umount: %s は fstab にありません (さらに、あなたは root ではありません)" +msgstr "" +"umount: %s は fstab にありません (さらに、あなたは root ではありません)" #: mount/umount.c:528 #, c-format @@ -8587,7 +8744,8 @@ msgstr "umount: root だけがそれを行なえます" #: sys-utils/ctrlaltdel.c:27 #, c-format msgid "You must be root to set the Ctrl-Alt-Del behaviour.\n" -msgstr "その Ctrl-Alt-Del の振る舞いを設定するには root で無ければなりません。\n" +msgstr "" +"その Ctrl-Alt-Del の振る舞いを設定するには root で無ければなりません。\n" #: sys-utils/ctrlaltdel.c:42 #, c-format @@ -8606,7 +8764,8 @@ msgstr "" #: sys-utils/cytune.c:125 #, c-format msgid "" -"File %s, For threshold value %lu and timrout value %lu, Maximum characters in fifo were %d,\n" +"File %s, For threshold value %lu and timrout value %lu, Maximum characters " +"in fifo were %d,\n" "and the maximum transfer rate in characters/second was %f\n" msgstr "" "ファイル %s、しきい値 %lu 及びタイムアウト値 %lu、パイプ内の最大キャラクタ\n" @@ -8639,8 +8798,12 @@ msgstr "不正な初期時刻: %s\n" #: sys-utils/cytune.c:238 #, c-format -msgid "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [file...]\n" -msgstr "使い方: %s [-q [-i 間隔]] ([-s 値]|[-S 値]) ([-t 値]|[-T 値]) [-g|-G] ファイル [ファイル...]\n" +msgid "" +"Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) " +"[-g|-G] file [file...]\n" +msgstr "" +"使い方: %s [-q [-i 間隔]] ([-s 値]|[-S 値]) ([-t 値]|[-T 値]) [-g|-G] ファイ" +"ル [ファイル...]\n" #: sys-utils/cytune.c:250 sys-utils/cytune.c:269 sys-utils/cytune.c:289 #: sys-utils/cytune.c:339 @@ -8693,7 +8856,8 @@ msgstr "%s で CYGETMON が発行できません: %s\n" #: sys-utils/cytune.c:418 #, c-format -msgid "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" +msgid "" +"%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" msgstr "" "%s: 整数 %lu、キャラクタ %lu/%lu -- fifo: 閾値 %lu、タイムアウト %lu、\n" " 最大 %lu、現在 %lu\n" @@ -8705,7 +8869,8 @@ msgstr " %f 整数/秒; %f 記録, %f 送信 (キャラクタ/秒)\n" #: sys-utils/cytune.c:429 #, c-format -msgid "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" +msgid "" +"%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" msgstr "" "%s: 整数 %lu、キャラクタ %lu -- fifo: しきい値 %lu、タイムアウト %lu、\n" " 最大 %lu、現在 %lu\n" @@ -8822,8 +8987,10 @@ msgstr "\t%s -h でヘルプを表示。\n" #: sys-utils/ipcs.c:130 #, c-format -msgid "%s provides information on ipc facilities for which you have read access.\n" -msgstr "%s はあなたが読込アクセスできる ipc の資源状況などの情報を提供します。\n" +msgid "" +"%s provides information on ipc facilities for which you have read access.\n" +msgstr "" +"%s はあなたが読込アクセスできる ipc の資源状況などの情報を提供します。\n" #: sys-utils/ipcs.c:132 #, c-format @@ -9401,10 +9568,12 @@ msgstr "%s を open できません" #: sys-utils/rdev.c:69 msgid "usage: rdev [ -rv ] [ -o OFFSET ] [ IMAGE [ VALUE [ OFFSET ] ] ]" -msgstr "使い方: rdev [ -rv ] [ -o オフセット ] [ イメージ [ 値 [ オフセット ] ] ]" +msgstr "" +"使い方: rdev [ -rv ] [ -o オフセット ] [ イメージ [ 値 [ オフセット ] ] ]" #: sys-utils/rdev.c:70 -msgid " rdev /dev/fd0 (or rdev /linux, etc.) displays the current ROOT device" +msgid "" +" rdev /dev/fd0 (or rdev /linux, etc.) displays the current ROOT device" msgstr " rdev /dev/fd0 (or rdev /linux, etc.) 現在のルートデバイスを表示" #: sys-utils/rdev.c:71 @@ -9440,12 +9609,15 @@ msgid " vidmode ... same as rdev -v" msgstr " vidmode ... rdev -v と同じ" #: sys-utils/rdev.c:79 -msgid "Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..." -msgstr "注意: ビデオモードは: -3=尋ねる, -2=拡張, -1=通常Vga, 1=キー1, 2=キー2,..." +msgid "" +"Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..." +msgstr "" +"注意: ビデオモードは: -3=尋ねる, -2=拡張, -1=通常Vga, 1=キー1, 2=キー2,..." #: sys-utils/rdev.c:80 msgid " use -R 1 to mount root readonly, -R 0 for read/write." -msgstr " ルートを読込専用マウントするには -R 1 を、-R 0 で読み書きマウント。" +msgstr "" +" ルートを読込専用マウントするには -R 1 を、-R 0 で読み書きマウント。" #: sys-utils/rdev.c:247 msgid "missing comma" @@ -9711,7 +9883,8 @@ msgstr "" msgid "" " -h, --help displays this help text\n" " -v, --verbose says what options are being switched on\n" -" -R, --addr-no-randomize disables randomization of the virtual address space\n" +" -R, --addr-no-randomize disables randomization of the virtual address " +"space\n" " -F, --fdpic-funcptrs makes function pointers point to descriptors\n" " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n" " -L, --addr-compat-layout changes the way virtual memory is allocated\n" @@ -9720,7 +9893,8 @@ msgid "" " -I, --short-inode turns on SHORT_INODE\n" " -S, --whole-seconds turns on WHOLE_SECONDS\n" " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n" -" -3, --3gb limits the used address space to a maximum of 3 GB\n" +" -3, --3gb limits the used address space to a maximum of 3 " +"GB\n" " --4gb ignored (for backward compatibility only)\n" msgstr "" @@ -9885,8 +10059,11 @@ msgstr "hexdump: 不正なスキップ値です。\n" #: text-utils/hexsyntax.c:131 #, c-format -msgid "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n" -msgstr "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [ファイル ...]\n" +msgid "" +"hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n" +msgstr "" +"hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [ファイ" +"ル ...]\n" #: text-utils/more.c:256 #, c-format @@ -9971,7 +10148,8 @@ msgstr "" #: text-utils/more.c:1294 msgid "" "\n" -"Most commands optionally preceded by integer argument k. Defaults in brackets.\n" +"Most commands optionally preceded by integer argument k. Defaults in " +"brackets.\n" "Star (*) indicates argument becomes new default.\n" msgstr "" @@ -10097,7 +10275,8 @@ msgstr "hexdump: 複数の文字のバイト数カウント\n" #: text-utils/parse.c:483 #, c-format msgid "hexdump: bad byte count for conversion character %s.\n" -msgstr "hexdump: 文字 %s の変換について不正なバイト数のカウントを行いました。\n" +msgstr "" +"hexdump: 文字 %s の変換について不正なバイト数のカウントを行いました。\n" #: text-utils/parse.c:490 #, c-format @@ -10116,8 +10295,11 @@ msgstr "hexdump: 不正な変換キャラクタ %%%s。\n" #: text-utils/pg.c:235 #, c-format -msgid "%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n" -msgstr "%s: 使い方: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [ファイル]\n" +msgid "" +"%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n" +msgstr "" +"%s: 使い方: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [ファイ" +"ル]\n" #: text-utils/pg.c:244 #, c-format @@ -10395,8 +10577,11 @@ msgstr "バッファを拡大するときにメモリが足りなくなりまし #~ msgid "%-10s %-10s %-10s %-10s %-12s %-12s\n" #~ msgstr "%-10s %-10s %-10s %-10s %-12s %-12s\n" -#~ msgid "usage: renice priority [ [ -p ] pids ] [ [ -g ] pgrps ] [ [ -u ] users ]\n" -#~ msgstr "使い方: renice 優先度 [ [ -p ] プロセスID ] [ [ -g ] プロセスグループ] [ [ -u ユーザ ]\n" +#~ msgid "" +#~ "usage: renice priority [ [ -p ] pids ] [ [ -g ] pgrps ] [ [ -u ] users ]\n" +#~ msgstr "" +#~ "使い方: renice 優先度 [ [ -p ] プロセスID ] [ [ -g ] プロセスグループ] " +#~ "[ [ -u ユーザ ]\n" #, fuzzy #~ msgid "Unknown option `%c' ignored" @@ -10447,8 +10632,10 @@ msgstr "バッファを拡大するときにメモリが足りなくなりまし #~ msgstr "%s from %s\n" #, fuzzy -#~ msgid "%s: could not open %s, so UUID and LABEL conversion cannot be done.\n" -#~ msgstr "mount: %s をオープンできなかったので、UUID と LABEL の変換も行えません。\n" +#~ msgid "" +#~ "%s: could not open %s, so UUID and LABEL conversion cannot be done.\n" +#~ msgstr "" +#~ "mount: %s をオープンできなかったので、UUID と LABEL の変換も行えません。\n" #, fuzzy #~ msgid "%s: bad UUID" @@ -10473,7 +10660,8 @@ msgstr "バッファを拡大するときにメモリが足りなくなりまし #~ msgstr "mount: 警告: 複数のホスト名はサポートされていません\n" #~ msgid "mount: directory to mount not in host:dir format\n" -#~ msgstr "mount: マウント先ディレクトリが ホスト:ディレクトリ 形式になっていません\n" +#~ msgstr "" +#~ "mount: マウント先ディレクトリが ホスト:ディレクトリ 形式になっていません\n" #~ msgid "mount: can't get address for %s\n" #~ msgstr "mount: %s のアドレスが取得できません\n" @@ -10550,8 +10738,10 @@ msgstr "バッファを拡大するときにメモリが足りなくなりまし #~ msgid " %s [ -p ] dev name\n" #~ msgstr " %s [ -p ] デバイス 名前\n" -#~ msgid " %s [ -p ] dev size sect heads tracks stretch gap rate spec1 fmt_gap\n" -#~ msgstr " %s [ -p ] dev size sect heads tracks stretch gap rate spec1 fmt_gap\n" +#~ msgid "" +#~ " %s [ -p ] dev size sect heads tracks stretch gap rate spec1 fmt_gap\n" +#~ msgstr "" +#~ " %s [ -p ] dev size sect heads tracks stretch gap rate spec1 fmt_gap\n" #~ msgid " %s [ -c | -y | -n | -d ] dev\n" #~ msgstr " %s [ -c | -y | -n | -d ] デバイス\n" @@ -10726,9 +10916,11 @@ msgstr "バッファを拡大するときにメモリが足りなくなりまし #~ " about the loop device (then recompile or `insmod loop.o'), or\n" #~ " maybe /dev/loop# has the wrong major number?" #~ msgstr "" -#~ "mount: loop デバイスが全く見つかりません。多分このカーネルは loop デバイスを\n" +#~ "mount: loop デバイスが全く見つかりません。多分このカーネルは loop デバイス" +#~ "を\n" #~ " 扱えません(そうだとしたら、再コンパイルするか `insmod loop.o'して\n" -#~ " ください)。あるいは、/dev/loop# のメジャー番号が間違っているのかも\n" +#~ " ください)。あるいは、/dev/loop# のメジャー番号が間違っているのか" +#~ "も\n" #~ " 知れません。" #~ msgid "Init (up to 16 hex digits): " @@ -10741,7 +10933,8 @@ msgstr "バッファを拡大するときにメモリが足りなくなりまし #~ msgstr "暗号化システム %d の鍵取得方法が解りません\n" #~ msgid "mount: this version was compiled without support for the type `nfs'" -#~ msgstr "mount: このバージョンは 'nfs' タイプのサポートなしでコンパイルされています" +#~ msgstr "" +#~ "mount: このバージョンは 'nfs' タイプのサポートなしでコンパイルされています" #~ msgid "mount: fs type %s not supported by kernel" #~ msgstr "mount: ファイルシステムタイプ %s はカーネルがサポートしていません" @@ -10870,7 +11063,8 @@ msgstr "バッファを拡大するときにメモリが足りなくなりまし #~ msgid "The password must contain characters out of two of the following\n" #~ msgstr "パスワードは以下の内 2 種類は含まれなければなりません\n" -#~ msgid "classes: upper and lower case letters, digits and non alphanumeric\n" +#~ msgid "" +#~ "classes: upper and lower case letters, digits and non alphanumeric\n" #~ msgstr "種類: 大文字と小文字、数値と非アルファベット数値\n" #~ msgid "characters. See passwd(1) for more information.\n" @@ -10913,7 +11107,8 @@ msgstr "バッファを拡大するときにメモリが足りなくなりまし #~ msgstr "mount: 警告: 再マウントでのマウント済デバイスの変更はできません\n" #~ msgid "mount: warning: cannot change filesystem type with a remount\n" -#~ msgstr "mount: 警告: 再マウントでのファイルシステムタイプの変更はできません\n" +#~ msgstr "" +#~ "mount: 警告: 再マウントでのファイルシステムタイプの変更はできません\n" #~ msgid "mount: %s has wrong major or minor number" #~ msgstr "mount: %s が間違ったメジャー又はマイナー番号になっています" @@ -11000,7 +11195,8 @@ msgstr "バッファを拡大するときにメモリが足りなくなりまし #~ "使い方: mount [-hV]\n" #~ " mount -a [-nfFrsvw] [-t ファイルシステム型]\n" #~ " mount [-nfrsvw] [-o オプション] special | node\n" -#~ " mount [-nfrsvw] [-t ファイルシステム型] [-o オプション] special node\n" +#~ " mount [-nfrsvw] [-t ファイルシステム型] [-o オプション] special " +#~ "node\n" #~ " スペシャルデバイスは -L ラベル 又は -U uuid で指示できます。\n" #~ msgid "mount: %s:%s failed, reason given by server: %s\n" diff --git a/po/nl.po b/po/nl.po index b61ca798..f9c635ba 100644 --- a/po/nl.po +++ b/po/nl.po @@ -414,7 +414,9 @@ msgstr "" #: disk-utils/fsck.minix.c:672 disk-utils/fsck.minix.c:723 #, c-format msgid "Inode %d marked unused, but used for file '%s'\n" -msgstr "Inode %d is gemarkeerd als ongebruikt, maar wordt gebruikt door bestand '%s'.\n" +msgstr "" +"Inode %d is gemarkeerd als ongebruikt, maar wordt gebruikt door bestand '%" +"s'.\n" #: disk-utils/fsck.minix.c:676 disk-utils/fsck.minix.c:727 msgid "Mark in use" @@ -767,7 +769,9 @@ msgstr "fout bij sluiten van %s" #: disk-utils/mkfs.c:73 #, c-format msgid "Usage: mkfs [-V] [-t fstype] [fs-options] device [size]\n" -msgstr "Gebruik: mkfs [-V] [-t bestandssysteemsoort] [bestandssysteemopties] apparaat [grootte]\n" +msgstr "" +"Gebruik: mkfs [-V] [-t bestandssysteemsoort] [bestandssysteemopties] " +"apparaat [grootte]\n" #: disk-utils/mkfs.c:88 disk-utils/mkfs.c:96 fdisk/cfdisk.c:351 #: getopt/getopt.c:91 getopt/getopt.c:101 login-utils/wall.c:246 @@ -783,7 +787,8 @@ msgstr "mkfs (%s)\n" #: disk-utils/mkfs.cramfs.c:124 #, c-format msgid "" -"usage: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname outfile\n" +"usage: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname " +"outfile\n" " -h print this help\n" " -v be verbose\n" " -E make all warnings errors (non-zero exit status)\n" @@ -803,9 +808,11 @@ msgstr "" " -h deze hulptekst tonen\n" " -v gedetailleerde uitvoer produceren\n" " -V programmaversie tonen\n" -" -E van alle waarschuwingen fouten maken (met niet-nul afsluitstatus)\n" +" -E van alle waarschuwingen fouten maken (met niet-nul " +"afsluitstatus)\n" "\n" -" -b blokgrootte deze blokgrootte gebruiken; moet gelijk zijn aan paginagrootte\n" +" -b blokgrootte deze blokgrootte gebruiken; moet gelijk zijn aan " +"paginagrootte\n" " -e editie editienummer instellen (deel van bestandssysteem-ID)\n" " -i bestand een bestandsafbeelding invoegen in het bestandssysteem\n" " -n naam te gebruiken naam van 'cramfs'-bestandssysteem\n" @@ -842,7 +849,9 @@ msgstr "%6.2f%% (%+ld bytes)\t%s\n" #: disk-utils/mkfs.cramfs.c:829 #, c-format -msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB. We might die prematurely.\n" +msgid "" +"warning: guestimate of required size (upper bound) is %lldMB, but maximum " +"image size is %uMB. We might die prematurely.\n" msgstr "" "Waarschuwing: de geschatte benodigde grootte is %lld MB (bovengrens),\n" "maar de maximale afbeeldingsgrootte is %u MB.\n" @@ -880,7 +889,9 @@ msgstr "CRC: %x\n" #: disk-utils/mkfs.cramfs.c:901 #, c-format msgid "not enough space allocated for ROM image (%lld allocated, %zu used)\n" -msgstr "niet genoeg ruimte gereserveerd voor ROM-afbeelding (%lld gereserveerd, %zu gebruikt)\n" +msgstr "" +"niet genoeg ruimte gereserveerd voor ROM-afbeelding (%lld gereserveerd, %zu " +"gebruikt)\n" #: disk-utils/mkfs.cramfs.c:909 msgid "ROM image" @@ -908,14 +919,16 @@ msgstr "Waarschuwing: bestandsgroottes afgekapt tot %lu MB (minus 1 byte).\n" #: disk-utils/mkfs.cramfs.c:933 #, c-format -msgid "warning: uids truncated to %u bits. (This may be a security concern.)\n" +msgid "" +"warning: uids truncated to %u bits. (This may be a security concern.)\n" msgstr "" "Waarschuwing: UID's afgekapt tot %u bits.\n" "(Dit kan een veiligheidsprobleem zijn.)\n" #: disk-utils/mkfs.cramfs.c:938 #, c-format -msgid "warning: gids truncated to %u bits. (This may be a security concern.)\n" +msgid "" +"warning: gids truncated to %u bits. (This may be a security concern.)\n" msgstr "" "Waarschuwing: GID's afgekapt tot %u bits.\n" "(Dit kan een veiligheidsprobleem zijn.)\n" @@ -932,7 +945,8 @@ msgstr "" #: disk-utils/mkfs.minix.c:160 #, c-format msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]\n" -msgstr "Gebruik: %s [-c | -l bestandsnaam] [-nXX] [-iXX] /dev/naam [blokken]\n" +msgstr "" +"Gebruik: %s [-c | -l bestandsnaam] [-nXX] [-iXX] /dev/naam [blokken]\n" #: disk-utils/mkfs.minix.c:184 #, c-format @@ -1000,7 +1014,8 @@ msgstr "'seek' is mislukt tijdens testen van blokken" #: disk-utils/mkfs.minix.c:480 #, c-format msgid "Weird values in do_check: probably bugs\n" -msgstr "Vreemde waarden in do_check(): waarschijnlijk een interne programmafout\n" +msgstr "" +"Vreemde waarden in do_check(): waarschijnlijk een interne programmafout\n" #: disk-utils/mkfs.minix.c:511 disk-utils/mkswap.c:374 msgid "seek failed in check_blocks" @@ -1080,12 +1095,15 @@ msgstr "Ongeldige door gebruiker aangegeven paginagrootte %d\n" #: disk-utils/mkswap.c:156 #, c-format msgid "Using user-specified page size %d, instead of the system value %d\n" -msgstr "De opgegeven paginagrootte %d wordt gebruikt, in plaats van systeemwaarde %d.\n" +msgstr "" +"De opgegeven paginagrootte %d wordt gebruikt, in plaats van systeemwaarde %" +"d.\n" #: disk-utils/mkswap.c:180 #, c-format msgid "Bad swap header size, no label written.\n" -msgstr "Onjuiste grootte van kop van wisselgeheugen; er is geen label geschreven.\n" +msgstr "" +"Onjuiste grootte van kop van wisselgeheugen; er is geen label geschreven.\n" #: disk-utils/mkswap.c:190 #, c-format @@ -1104,8 +1122,11 @@ msgstr "geen UUID\n" #: disk-utils/mkswap.c:328 #, c-format -msgid "Usage: %s [-c] [-v0|-v1] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n" -msgstr "Gebruik: %s [-c] [-v0|-v1] [-ppaginagrootte] [-L label] [-U UUID] /dev/naam [blokken]\n" +msgid "" +"Usage: %s [-c] [-v0|-v1] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n" +msgstr "" +"Gebruik: %s [-c] [-v0|-v1] [-ppaginagrootte] [-L label] [-U " +"UUID] /dev/naam [blokken]\n" #: disk-utils/mkswap.c:351 msgid "too many bad pages" @@ -1291,7 +1312,9 @@ msgstr "De schijf is veranderd.\n" #: fdisk/cfdisk.c:413 #, c-format msgid "Reboot the system to ensure the partition table is correctly updated.\n" -msgstr "Start het systeem opnieuw op om er zeker van te zijn dat de partitietabel juist wordt bijgewerkt.\n" +msgstr "" +"Start het systeem opnieuw op om er zeker van te zijn dat de partitietabel " +"juist wordt bijgewerkt.\n" #: fdisk/cfdisk.c:417 #, c-format @@ -1362,12 +1385,17 @@ msgid "enlarged logical partitions overlap" msgstr "vergrote logische partities overlappen" #: fdisk/cfdisk.c:999 -msgid "!!!! Internal error creating logical drive with no extended partition !!!!" -msgstr "!!! Interne fout bij het maken van logische schijf zonder uitgebreide partitie !!!" +msgid "" +"!!!! Internal error creating logical drive with no extended partition !!!!" +msgstr "" +"!!! Interne fout bij het maken van logische schijf zonder uitgebreide " +"partitie !!!" #: fdisk/cfdisk.c:1010 fdisk/cfdisk.c:1022 -msgid "Cannot create logical drive here -- would create two extended partitions" -msgstr "Kan hier geen logische schijf maken -- zou twee uitgebreide partities maken" +msgid "" +"Cannot create logical drive here -- would create two extended partitions" +msgstr "" +"Kan hier geen logische schijf maken -- zou twee uitgebreide partities maken" #: fdisk/cfdisk.c:1164 msgid "Menu item too long. Menu may look odd." @@ -1469,10 +1497,13 @@ msgstr "Kan schijf niet openen" #: fdisk/cfdisk.c:1671 fdisk/cfdisk.c:1858 msgid "Opened disk read-only - you have no permission to write" -msgstr "Schijf is als alleen-lezen geopend -- u hebt geen toegangsrechten om te schrijven" +msgstr "" +"Schijf is als alleen-lezen geopend -- u hebt geen toegangsrechten om te " +"schrijven" #: fdisk/cfdisk.c:1682 -msgid "Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted." +msgid "" +"Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted." msgstr "" "Waarschuwing: niet-ondersteunde GPT (GUID-partitietabel) gevonden!\n" "Gebruik GNU 'parted'." @@ -1494,8 +1525,10 @@ msgid "Warning!! This may destroy data on your disk!" msgstr "Waarschuwing!! Dit kan gegevens op uw schijf wissen!" #: fdisk/cfdisk.c:1874 -msgid "Are you sure you want to write the partition table to disk? (yes or no): " -msgstr "Weet u zeker dat u de partitietabel naar schijf wilt schrijven? (ja of nee): " +msgid "" +"Are you sure you want to write the partition table to disk? (yes or no): " +msgstr "" +"Weet u zeker dat u de partitietabel naar schijf wilt schrijven? (ja of nee): " #: fdisk/cfdisk.c:1880 msgid "no" @@ -1522,20 +1555,29 @@ msgid "Wrote partition table to disk" msgstr "De partitietabel is naar schijf geschreven." #: fdisk/cfdisk.c:1919 -msgid "Wrote partition table, but re-read table failed. Reboot to update table." -msgstr "Partitietabel is geschreven, maar opnieuw inlezen is mislukt. Herstart uw systeem om de tabel bij te werken." +msgid "" +"Wrote partition table, but re-read table failed. Reboot to update table." +msgstr "" +"Partitietabel is geschreven, maar opnieuw inlezen is mislukt. Herstart uw " +"systeem om de tabel bij te werken." #: fdisk/cfdisk.c:1929 msgid "No primary partitions are marked bootable. DOS MBR cannot boot this." -msgstr "Er is geen primaire partitie als opstartbaar aangegeven. DOS MBR kan dit niet opstarten." +msgstr "" +"Er is geen primaire partitie als opstartbaar aangegeven. DOS MBR kan dit " +"niet opstarten." #: fdisk/cfdisk.c:1931 -msgid "More than one primary partition is marked bootable. DOS MBR cannot boot this." -msgstr "Meer dan één primaire partitie is als opstartbaar aangegeven. DOS MBR kan dit niet opstarten." +msgid "" +"More than one primary partition is marked bootable. DOS MBR cannot boot this." +msgstr "" +"Meer dan één primaire partitie is als opstartbaar aangegeven. DOS MBR kan " +"dit niet opstarten." #: fdisk/cfdisk.c:1989 fdisk/cfdisk.c:2108 fdisk/cfdisk.c:2192 msgid "Enter filename or press RETURN to display on screen: " -msgstr "Geef een bestandsnaam op, of druk op Enter voor weergave op het scherm: " +msgstr "" +"Geef een bestandsnaam op, of druk op Enter voor weergave op het scherm: " #: fdisk/cfdisk.c:1998 fdisk/cfdisk.c:2116 fdisk/cfdisk.c:2200 #, c-format @@ -1600,12 +1642,20 @@ msgid " First Last\n" msgstr " Eerste Laatste\n" #: fdisk/cfdisk.c:2130 -msgid " # Type Sector Sector Offset Length Filesystem Type (ID) Flag\n" -msgstr " # Type sector sector Plaats Lengte Bestandssysteem (ID) Vlag\n" +msgid "" +" # Type Sector Sector Offset Length Filesystem Type (ID) " +"Flag\n" +msgstr "" +" # Type sector sector Plaats Lengte Bestandssysteem (ID) " +"Vlag\n" #: fdisk/cfdisk.c:2131 -msgid "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n" -msgstr "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n" +msgid "" +"-- ------- ----------- ----------- ------ ----------- -------------------- " +"----\n" +msgstr "" +"-- ------- ----------- ----------- ------ ----------- -------------------- " +"----\n" #: fdisk/cfdisk.c:2214 msgid " ---Starting---- ----Ending----- Start Number of\n" @@ -1689,7 +1739,8 @@ msgstr " g cilinders, koppen, sectoren-per-spoor wijzigen;" #: fdisk/cfdisk.c:2293 msgid " WARNING: This option should only be used by people who" -msgstr " *waarschuwing*: deze optie dient alleen te worden gebruikt" +msgstr "" +" *waarschuwing*: deze optie dient alleen te worden gebruikt" #: fdisk/cfdisk.c:2294 msgid " know what they are doing." @@ -1705,7 +1756,8 @@ msgstr " m schijfgebruik van de huidige partitie maximaliseren;" #: fdisk/cfdisk.c:2297 msgid " Note: This may make the partition incompatible with" -msgstr " dit kan een partitie incompatibel maken met DOS, OS/2, ..." +msgstr "" +" dit kan een partitie incompatibel maken met DOS, OS/2, ..." #: fdisk/cfdisk.c:2298 msgid " DOS, OS/2, ..." @@ -1729,7 +1781,8 @@ msgstr " " #: fdisk/cfdisk.c:2303 msgid " r - Raw data (exactly what would be written to disk)" -msgstr " r - ruwe gegevens (exact wat naar schijf zou worden geschreven)" +msgstr "" +" r - ruwe gegevens (exact wat naar schijf zou worden geschreven)" #: fdisk/cfdisk.c:2304 msgid " s - Table ordered by sectors" @@ -1761,7 +1814,8 @@ msgstr " W partitietabel naar schijf schrijven (moet met hoofdletter);" #: fdisk/cfdisk.c:2311 msgid " Since this might destroy data on the disk, you must" -msgstr " omdat dit mogelijk gegevens op de schijf wist, dient u het" +msgstr "" +" omdat dit mogelijk gegevens op de schijf wist, dient u het" #: fdisk/cfdisk.c:2312 msgid " either confirm or deny the write by entering `yes' or" @@ -1789,7 +1843,8 @@ msgstr " ? dit hulpscherm tonen" #: fdisk/cfdisk.c:2319 msgid "Note: All of the commands can be entered with either upper or lower" -msgstr "Opmerking: alle opdrachten kunnen zowel met hoofdletter als kleine letter" +msgstr "" +"Opmerking: alle opdrachten kunnen zowel met hoofdletter als kleine letter" #: fdisk/cfdisk.c:2320 msgid "case letters (except for Writes)." @@ -1975,7 +2030,8 @@ msgstr "Maximeren" #: fdisk/cfdisk.c:2744 msgid "Maximize disk usage of the current partition (experts only)" -msgstr "M = schijfgebruik maximaliseren voor huidige partitie (alleen voor experts)" +msgstr "" +"M = schijfgebruik maximaliseren voor huidige partitie (alleen voor experts)" #: fdisk/cfdisk.c:2745 msgid "New" @@ -2087,8 +2143,10 @@ msgstr "" " %s -v programmaversie tonen\n" "Opties:\n" "-a een pijl gebruiken in plaats van een inverse balk;\n" -"-z met lege partitietabel starten, in plaats van deze van schijf te lezen;\n" -"-c C -h K -s S andere waarden afdwingen voor het aantal cilinders, koppen en\n" +"-z met lege partitietabel starten, in plaats van deze van schijf te " +"lezen;\n" +"-c C -h K -s S andere waarden afdwingen voor het aantal cilinders, koppen " +"en\n" " sectoren/spoor dan de kernel aangeeft.\n" "\n" @@ -2459,8 +2517,10 @@ msgid "" "-u: give Start and End in sector (instead of cylinder) units\n" "-b 2048: (for certain MO disks) use 2048-byte sectors\n" msgstr "" -"Gebruik: fdisk [-b SECTORGROOTTE] [-u] APPARAAT partitietabel wijzigen\n" -" fdisk -l [-b SECTORGROOTTE] [-u] APPARAAT partitietabel weergeven\n" +"Gebruik: fdisk [-b SECTORGROOTTE] [-u] APPARAAT partitietabel " +"wijzigen\n" +" fdisk -l [-b SECTORGROOTTE] [-u] APPARAAT partitietabel " +"weergeven\n" " fdisk -s PARTITIE partitiegrootte in blokken weergeven\n" " fdisk -v programmaversie tonen\n" "\n" @@ -2748,8 +2808,10 @@ msgid "" "\n" msgstr "" "Er wordt een nieuwe DOS-partitietabel aangemaakt met schijf-ID 0x%08x.\n" -"Wijzigingen vinden enkel en alleen in het geheugen plaats, totdat u besluit ze\n" -"weg te schrijven. Daarna is de oude inhoud uiteraard niet meer herstelbaar.\n" +"Wijzigingen vinden enkel en alleen in het geheugen plaats, totdat u besluit " +"ze\n" +"weg te schrijven. Daarna is de oude inhoud uiteraard niet meer " +"herstelbaar.\n" "\n" #: fdisk/fdisk.c:843 @@ -2773,7 +2835,9 @@ msgstr "" #: fdisk/fdisk.c:1017 #, c-format -msgid "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel\n" +msgid "" +"Device contains neither a valid DOS partition table, nor Sun, SGI or OSF " +"disklabel\n" msgstr "Apparaat bevat geen geldig DOS-, Sun-, SGI- of OSF-schijflabel.\n" #: fdisk/fdisk.c:1034 @@ -2788,7 +2852,9 @@ msgstr "Extra uitgebreide partitie %d wordt genegeerd.\n" #: fdisk/fdisk.c:1059 #, c-format -msgid "Warning: invalid flag 0x%04x of partition table %d will be corrected by w(rite)\n" +msgid "" +"Warning: invalid flag 0x%04x of partition table %d will be corrected by w" +"(rite)\n" msgstr "" "Waarschuwing: onjuiste optie 0x%04x van partitietabel %d zal\n" "worden gecorrigeerd bij het schrijven.\n" @@ -2949,7 +3015,8 @@ msgstr "Systeemtype van partitie %d is onveranderd: %x (%s)\n" #: fdisk/fdisk.c:1576 #, c-format msgid "Partition %d has different physical/logical beginnings (non-Linux?):\n" -msgstr "Partitie %d heeft verschillende fysieke/logische beginpunten (niet-Linux?):\n" +msgstr "" +"Partitie %d heeft verschillende fysieke/logische beginpunten (niet-Linux?):\n" #: fdisk/fdisk.c:1578 fdisk/fdisk.c:1586 fdisk/fdisk.c:1595 fdisk/fdisk.c:1605 #, c-format @@ -3103,7 +3170,9 @@ msgstr "Partities %d: cilindernummer %d is groter dan maximum %d\n" #: fdisk/fdisk.c:1918 #, c-format msgid "Partition %d: previous sectors %d disagrees with total %d\n" -msgstr "Partitie %d: einde van vorige partitie in sectoren %d verschilt van totaal %d\n" +msgstr "" +"Partitie %d: einde van vorige partitie in sectoren %d verschilt van totaal %" +"d\n" #: fdisk/fdisk.c:1950 #, c-format @@ -3311,7 +3380,8 @@ msgstr "Waarschuwing: sectorplaats wordt ingesteld voor DOS-compatibiliteit\n" #, c-format msgid "" "\n" -"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't support GPT. Use GNU Parted.\n" +"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't " +"support GPT. Use GNU Parted.\n" "\n" msgstr "" "\n" @@ -3342,11 +3412,14 @@ msgstr "%c: onbekende opdracht\n" #: fdisk/fdisk.c:2631 #, c-format msgid "This kernel finds the sector size itself - -b option ignored\n" -msgstr "Deze kernel vindt zelf de sectorgrootte -- optie '-b' wordt genegeerd\n" +msgstr "" +"Deze kernel vindt zelf de sectorgrootte -- optie '-b' wordt genegeerd\n" #: fdisk/fdisk.c:2635 #, c-format -msgid "Warning: the -b (set sector size) option should be used with one specified device\n" +msgid "" +"Warning: the -b (set sector size) option should be used with one specified " +"device\n" msgstr "" "Waarschuwing: optie '-b' (sectorgrootte instellen) dient met\n" "slechts één apparaat gebruikt te worden.\n" @@ -3485,8 +3558,12 @@ msgstr "Linux RAID" #: fdisk/fdisksgilabel.c:164 #, c-format -msgid "According to MIPS Computer Systems, Inc the Label must not contain more than 512 bytes\n" -msgstr "Volgens 'MIPS Computer Systems' mag het label niet meer dan 512 bytes bevatten.\n" +msgid "" +"According to MIPS Computer Systems, Inc the Label must not contain more than " +"512 bytes\n" +msgstr "" +"Volgens 'MIPS Computer Systems' mag het label niet meer dan 512 bytes " +"bevatten.\n" #: fdisk/fdisksgilabel.c:183 #, c-format @@ -3769,7 +3846,8 @@ msgstr "" #: fdisk/fdisksgilabel.c:730 fdisk/fdisksunlabel.c:226 #, c-format msgid "" -"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %d.\n" +"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %" +"d.\n" "This value may be truncated for devices > 33.8 GB.\n" msgstr "" "Waarschuwing: ioctl(BLKGETSIZE) is mislukt op %s.\n" @@ -3864,7 +3942,8 @@ msgstr "Sun-schijflabel gevonden met foutief partitie-aantal [%u].\n" #: fdisk/fdisksunlabel.c:168 #, c-format -msgid "Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n" +msgid "" +"Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n" msgstr "" "Waarschuwing: onjuiste waardes dienen verbeterd te worden en\n" "zullen gecorrigeerd worden bij het wegschrijven ('w').\n" @@ -3946,7 +4025,8 @@ msgid "" "If you want to maintain SunOS/Solaris compatibility, consider leaving this\n" "partition as Whole disk (5), starting at 0, with %u sectors\n" msgstr "" -"Als u SunOS/Solaris-compatibiliteit wilt behouden, kunt u deze partitie beter\n" +"Als u SunOS/Solaris-compatibiliteit wilt behouden, kunt u deze partitie " +"beter\n" "als gehele schijf (5) laten, beginnend bij 0, met %u sectoren.\n" #: fdisk/fdisksunlabel.c:546 @@ -4425,7 +4505,8 @@ msgstr "kan status van partitionerings-herstelbestand (%s) niet bepalen\n" #: fdisk/sfdisk.c:355 msgid "partition restore file has wrong size - not restoring\n" -msgstr "partitionerings-herstelbestand heeft onjuiste grootte -- niet hersteld\n" +msgstr "" +"partitionerings-herstelbestand heeft onjuiste grootte -- niet hersteld\n" #: fdisk/sfdisk.c:359 msgid "out of memory?\n" @@ -4486,7 +4567,8 @@ msgstr "Waarschuwing: ioctl(HDIO_GETGEO) zegt dat er %lu sectoren zijn\n" #: fdisk/sfdisk.c:516 #, c-format msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders\n" -msgstr "Waarschuwing: ioctl(BLKGETSIZE/HDIO_GETGEO) zegt dat er %lu cilinders zijn\n" +msgstr "" +"Waarschuwing: ioctl(BLKGETSIZE/HDIO_GETGEO) zegt dat er %lu cilinders zijn\n" #: fdisk/sfdisk.c:521 #, c-format @@ -4494,7 +4576,8 @@ msgid "" "Warning: unlikely number of sectors (%lu) - usually at most 63\n" "This will give problems with all software that uses C/H/S addressing.\n" msgstr "" -"Waarschuwing: onwaarschijnlijk aantal sectoren (%lu) -- meestal hoogstens 63.\n" +"Waarschuwing: onwaarschijnlijk aantal sectoren (%lu) -- meestal hoogstens " +"63.\n" "Dit zal problemen geven met alle software die C/K/S-adressering gebruikt.\n" #: fdisk/sfdisk.c:525 @@ -4508,18 +4591,29 @@ msgstr "" #: fdisk/sfdisk.c:607 #, c-format -msgid "%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n" -msgstr "%s van partitie %s heeft een onmogelijke waarde voor koppen: %lu (moet liggen tussen 0 en %lu)\n" +msgid "" +"%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n" +msgstr "" +"%s van partitie %s heeft een onmogelijke waarde voor koppen: %lu (moet " +"liggen tussen 0 en %lu)\n" #: fdisk/sfdisk.c:612 #, c-format -msgid "%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)\n" -msgstr "%s van partitie %s heeft een onmogelijke waarde voor sectoren: %lu (moet liggen tussen 1 en %lu)\n" +msgid "" +"%s of partition %s has impossible value for sector: %lu (should be in 1-%" +"lu)\n" +msgstr "" +"%s van partitie %s heeft een onmogelijke waarde voor sectoren: %lu (moet " +"liggen tussen 1 en %lu)\n" #: fdisk/sfdisk.c:617 #, c-format -msgid "%s of partition %s has impossible value for cylinders: %lu (should be in 0-%lu)\n" -msgstr "%s van partitie %s heeft een onmogelijke waarde voor cilinders: %lu (moet liggen tussen 0 en %lu)\n" +msgid "" +"%s of partition %s has impossible value for cylinders: %lu (should be in 0-%" +"lu)\n" +msgstr "" +"%s van partitie %s heeft een onmogelijke waarde voor cilinders: %lu (moet " +"liggen tussen 0 en %lu)\n" #: fdisk/sfdisk.c:657 #, c-format @@ -4624,7 +4718,8 @@ msgid "" "Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from %d\n" "\n" msgstr "" -"Eenheid = mebibytes van 1048576 bytes, blokken van 1024 bytes, tellend vanaf %d\n" +"Eenheid = mebibytes van 1048576 bytes, blokken van 1024 bytes, tellend vanaf " +"%d\n" "\n" #: fdisk/sfdisk.c:959 @@ -4689,7 +4784,8 @@ msgstr "Vreemd: slechts %d partities gedefinieerd.\n" #: fdisk/sfdisk.c:1203 #, c-format msgid "Warning: partition %s has size 0 but is not marked Empty\n" -msgstr "Waarschuwing: partitie %s heeft grootte 0, maar is niet aangegeven als Leeg\n" +msgstr "" +"Waarschuwing: partitie %s heeft grootte 0, maar is niet aangegeven als Leeg\n" #: fdisk/sfdisk.c:1206 #, c-format @@ -4699,7 +4795,8 @@ msgstr "Waarschuwing: partitie %s heeft grootte 0 en is opstartbaar\n" #: fdisk/sfdisk.c:1209 #, c-format msgid "Warning: partition %s has size 0 and nonzero start\n" -msgstr "Waarschuwing: partitie %s heeft grootte 0 maar een niet-nul beginsector\n" +msgstr "" +"Waarschuwing: partitie %s heeft grootte 0 maar een niet-nul beginsector\n" #: fdisk/sfdisk.c:1220 #, c-format @@ -4764,7 +4861,8 @@ msgid "" "This does not matter for LILO, but the DOS MBR will not boot this disk.\n" msgstr "" "Waarschuwing: meerdere primaire partities zijn gemarkeerd als opstartbaar.\n" -"Voor LILO maakt dit niets uit, maar DOS MBR zal niet van deze schijf opstarten.\n" +"Voor LILO maakt dit niets uit, maar DOS MBR zal niet van deze schijf " +"opstarten.\n" #: fdisk/sfdisk.c:1324 msgid "" @@ -4780,7 +4878,8 @@ msgid "" "This does not matter for LILO, but the DOS MBR will not boot this disk.\n" msgstr "" "Waarschuwing: er is geen primaire partitie gemarkeerd als opstartbaar.\n" -"Voor LILO maakt dit niets uit, maar DOS MBR zal niet van deze schijf opstarten.\n" +"Voor LILO maakt dit niets uit, maar DOS MBR zal niet van deze schijf " +"opstarten.\n" #: fdisk/sfdisk.c:1344 msgid "start" @@ -4788,8 +4887,10 @@ msgstr "begin" #: fdisk/sfdisk.c:1347 #, c-format -msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" -msgstr "partitie %s: begin: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n" +msgid "" +"partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" +msgstr "" +"partitie %s: begin: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n" #: fdisk/sfdisk.c:1353 msgid "end" @@ -4798,7 +4899,8 @@ msgstr "einde" #: fdisk/sfdisk.c:1356 #, c-format msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" -msgstr "partitie %s: einde: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n" +msgstr "" +"partitie %s: einde: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n" #: fdisk/sfdisk.c:1359 #, c-format @@ -4811,7 +4913,8 @@ msgid "" "Warning: shifted start of the extd partition from %ld to %ld\n" "(For listing purposes only. Do not change its contents.)\n" msgstr "" -"Waarschuwing: begin van uitgebreide partitie is verschoven van %ld naar %ld.\n" +"Waarschuwing: begin van uitgebreide partitie is verschoven van %ld naar %" +"ld.\n" "(Alleen voor weergave. De inhoud wordt niet gewijzigd.)\n" #: fdisk/sfdisk.c:1390 @@ -4915,7 +5018,9 @@ msgstr "Onjuiste soort\n" #: fdisk/sfdisk.c:2105 #, c-format msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n" -msgstr "Waarschuwing: gegeven groote (%lu) is groter dan maximaal toegelaten grootte (%lu)\n" +msgstr "" +"Waarschuwing: gegeven groote (%lu) is groter dan maximaal toegelaten grootte " +"(%lu)\n" #: fdisk/sfdisk.c:2111 msgid "Warning: empty partition\n" @@ -4954,8 +5059,10 @@ msgid "" msgstr "" " \n" "Invoer is in deze indeling (afwezige velden krijgen een standaardwaarde):\n" -" \n" -"Meestal hoeft u alleen en te gebruiken (en mogelijk ).\n" +" \n" +"Meestal hoeft u alleen en te gebruiken (en mogelijk " +").\n" #: fdisk/sfdisk.c:2292 #, c-format @@ -4984,15 +5091,21 @@ msgstr " -l, --list partities weergeven" #: fdisk/sfdisk.c:2298 msgid " -d [or --dump]: idem, but in a format suitable for later input" -msgstr " -d, --dump idem, maar in een opmaak geschikt voor latere invoer" +msgstr "" +" -d, --dump idem, maar in een opmaak geschikt voor latere invoer" #: fdisk/sfdisk.c:2299 msgid " -i [or --increment]: number cylinders etc. from 1 instead of from 0" -msgstr " -i, --increment cilinders/sectoren/... nummeren vanaf 1 in plaats vanaf 0" +msgstr "" +" -i, --increment cilinders/sectoren/... nummeren vanaf 1 in plaats " +"vanaf 0" #: fdisk/sfdisk.c:2300 -msgid " -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/MB" -msgstr " -uS, -uB, -uC, -uM invoeren/weergeven in sectoren/blokken/cilinders/MB" +msgid "" +" -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/" +"MB" +msgstr "" +" -uS, -uB, -uC, -uM invoeren/weergeven in sectoren/blokken/cilinders/MB" #: fdisk/sfdisk.c:2301 msgid " -T [or --list-types]:list the known partition types" @@ -5000,11 +5113,13 @@ msgstr " -T, --list-types bekende partitietypen opsommen" #: fdisk/sfdisk.c:2302 msgid " -D [or --DOS]: for DOS-compatibility: waste a little space" -msgstr " -D, --DOS een beetje ruimte verspillen (voor DOS-compatibiliteit)" +msgstr "" +" -D, --DOS een beetje ruimte verspillen (voor DOS-compatibiliteit)" #: fdisk/sfdisk.c:2303 msgid " -R [or --re-read]: make kernel reread partition table" -msgstr " -R, --re-read de partitietabel opnieuw in laten lezen door de kernel" +msgstr "" +" -R, --re-read de partitietabel opnieuw in laten lezen door de kernel" #: fdisk/sfdisk.c:2304 msgid " -N# : change only the partition with number #" @@ -5015,8 +5130,10 @@ msgid " -n : do not actually write to disk" msgstr " -n niet echt naar de schijf schrijven, doen alsof" #: fdisk/sfdisk.c:2306 -msgid " -O file : save the sectors that will be overwritten to file" -msgstr " -O bestand de te overschrijven sectoren opslaan in dit bestand" +msgid "" +" -O file : save the sectors that will be overwritten to file" +msgstr "" +" -O bestand de te overschrijven sectoren opslaan in dit bestand" #: fdisk/sfdisk.c:2307 msgid " -I file : restore these sectors again" @@ -5039,8 +5156,12 @@ msgid " -g [or --show-geometry]: print the kernel's idea of the geometry" msgstr " -g, --show-geometry de kernelvisie van de geometrie weergeven" #: fdisk/sfdisk.c:2312 -msgid " -G [or --show-pt-geometry]: print geometry guessed from the partition table" -msgstr " -G, --show-pt-geometry de uit de partitietabel afgeleide geometrie weergeven" +msgid "" +" -G [or --show-pt-geometry]: print geometry guessed from the partition " +"table" +msgstr "" +" -G, --show-pt-geometry de uit de partitietabel afgeleide geometrie " +"weergeven" #: fdisk/sfdisk.c:2313 msgid "" @@ -5051,8 +5172,11 @@ msgstr "" " of beschrijvers ervan verwachten in de invoer" #: fdisk/sfdisk.c:2315 -msgid " -L [or --Linux]: do not complain about things irrelevant for Linux" -msgstr " -L, --Linux niet klagen over dingen die niet relevant zijn voor Linux" +msgid "" +" -L [or --Linux]: do not complain about things irrelevant for Linux" +msgstr "" +" -L, --Linux niet klagen over dingen die niet relevant zijn voor " +"Linux" #: fdisk/sfdisk.c:2316 msgid " -q [or --quiet]: suppress warning messages" @@ -5094,18 +5218,21 @@ msgstr "%s apparaat actieve partities op apparaat weergeven\n" #: fdisk/sfdisk.c:2330 #, c-format msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n" -msgstr "%s apparaat n1 n2 ... genoemde partities activeren, de rest de-activeren\n" +msgstr "" +"%s apparaat n1 n2 ... genoemde partities activeren, de rest de-activeren\n" #: fdisk/sfdisk.c:2331 #, c-format msgid "%s -An device\t activate partition n, inactivate the other ones\n" -msgstr "%s -An apparaat partitie n activeren, alle andere de-activeren\n" +msgstr "" +"%s -An apparaat partitie n activeren, alle andere de-activeren\n" #: fdisk/sfdisk.c:2450 #, c-format msgid "" "\n" -"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk doesn't support GPT. Use GNU Parted.\n" +"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk " +"doesn't support GPT. Use GNU Parted.\n" "\n" msgstr "" "\n" @@ -5335,14 +5462,16 @@ msgstr " getopt [opties] [--] optiereeks parameters\n" #: getopt/getopt.c:328 msgid " getopt [options] -o|--options optstring [options] [--]\n" -msgstr " getopt [opties] -o|--options optiereeks [opties] [--] parameters\n" +msgstr "" +" getopt [opties] -o|--options optiereeks [opties] [--] parameters\n" #: getopt/getopt.c:329 msgid " parameters\n" msgstr " \n" #: getopt/getopt.c:330 -msgid " -a, --alternative Allow long options starting with single -\n" +msgid "" +" -a, --alternative Allow long options starting with single -\n" msgstr " -a, --alternative lange opties met één '-' toestaan\n" #: getopt/getopt.c:331 @@ -5354,7 +5483,8 @@ msgid " -l, --longoptions=longopts Long options to be recognized\n" msgstr " -l, --longoptions=optiereeks te herkennen lange opties\n" #: getopt/getopt.c:333 -msgid " -n, --name=progname The name under which errors are reported\n" +msgid "" +" -n, --name=progname The name under which errors are reported\n" msgstr " -n, --name=programmanaam fouten rapporteren onder deze naam\n" #: getopt/getopt.c:334 @@ -5363,7 +5493,8 @@ msgstr " -o, --options=optiereeks te herkennen korte opties\n" #: getopt/getopt.c:335 msgid " -q, --quiet Disable error reporting by getopt(3)\n" -msgstr " -q, --quiet foutrapportage van getopt(3) uitzetten\n" +msgstr "" +" -q, --quiet foutrapportage van getopt(3) uitzetten\n" #: getopt/getopt.c:336 msgid " -Q, --quiet-output No normal output\n" @@ -5371,11 +5502,14 @@ msgstr " -Q, --quiet-output gewone uitvoer onderdrukken\n" #: getopt/getopt.c:337 msgid " -s, --shell=shell Set shell quoting conventions\n" -msgstr " -s, --shell=shell aanhalingsconventies van deze shell gebruiken\n" +msgstr "" +" -s, --shell=shell aanhalingsconventies van deze shell " +"gebruiken\n" #: getopt/getopt.c:338 msgid " -T, --test Test for getopt(1) version\n" -msgstr " -T, --test bepalen of dit een verbeterde getopt(1) is\n" +msgstr "" +" -T, --test bepalen of dit een verbeterde getopt(1) is\n" #: getopt/getopt.c:339 msgid " -u, --unqote Do not quote the output\n" @@ -5503,7 +5637,9 @@ msgstr "Ongeldige waarden in hardwareklok: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n" #: hwclock/hwclock.c:416 #, c-format msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n" -msgstr "Hardwarekloktijd is: %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconden sinds 1969.\n" +msgstr "" +"Hardwarekloktijd is: %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconden sinds " +"1969.\n" #: hwclock/hwclock.c:444 #, c-format @@ -5513,7 +5649,8 @@ msgstr "Tijd gelezen van de hardwareklok: %4d/%.2d/%.2d %02d:%02d:%02d\n" #: hwclock/hwclock.c:471 #, c-format msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n" -msgstr "Instellen van hardwareklok op %.2d:%.2d:%.2d = %ld seconden sinds 1969.\n" +msgstr "" +"Instellen van hardwareklok op %.2d:%.2d:%.2d = %ld seconden sinds 1969.\n" #: hwclock/hwclock.c:477 #, c-format @@ -5531,8 +5668,13 @@ msgstr "" #: hwclock/hwclock.c:559 #, c-format -msgid "The Hardware Clock registers contain values that are either invalid (e.g. 50th day of month) or beyond the range we can handle (e.g. Year 2095).\n" -msgstr "De hardwareklok bevat waarden die ofwel onjuist zijn (bijvoorbeeld de 50e dag van de maand) of buiten het ondersteunde bereik vallen (bijvoorbeeld het jaar 2095).\n" +msgid "" +"The Hardware Clock registers contain values that are either invalid (e.g. " +"50th day of month) or beyond the range we can handle (e.g. Year 2095).\n" +msgstr "" +"De hardwareklok bevat waarden die ofwel onjuist zijn (bijvoorbeeld de 50e " +"dag van de maand) of buiten het ondersteunde bereik vallen (bijvoorbeeld het " +"jaar 2095).\n" #: hwclock/hwclock.c:569 #, c-format @@ -5590,13 +5732,15 @@ msgstr "" #: hwclock/hwclock.c:650 #, c-format msgid "" -"The date command issued by %s returned something other than an integer where the converted time value was expected.\n" +"The date command issued by %s returned something other than an integer where " +"the converted time value was expected.\n" "The command was:\n" " %s\n" "The response was:\n" " %s\n" msgstr "" -"De 'date'-opdracht uitgevoerd door %s gaf geen geheel getal waar de geconverteerde tijdswaarde werd verwacht.\n" +"De 'date'-opdracht uitgevoerd door %s gaf geen geheel getal waar de " +"geconverteerde tijdswaarde werd verwacht.\n" "De opdracht was:\n" " %s\n" "Het antwoord was:\n" @@ -5609,8 +5753,12 @@ msgstr "Datumtekst %s is gelijk aan %ld seconden sinds 1969.\n" #: hwclock/hwclock.c:693 #, c-format -msgid "The Hardware Clock does not contain a valid time, so we cannot set the System Time from it.\n" -msgstr "De hardwareklok bevat geen geldige tijd, zodat de systeemtijd er niet mee ingesteld kan worden.\n" +msgid "" +"The Hardware Clock does not contain a valid time, so we cannot set the " +"System Time from it.\n" +msgstr "" +"De hardwareklok bevat geen geldige tijd, zodat de systeemtijd er niet mee " +"ingesteld kan worden.\n" #: hwclock/hwclock.c:715 #, c-format @@ -5643,7 +5791,9 @@ msgstr "settimeofday() is mislukt" #: hwclock/hwclock.c:763 #, c-format -msgid "Not adjusting drift factor because the Hardware Clock previously contained garbage.\n" +msgid "" +"Not adjusting drift factor because the Hardware Clock previously contained " +"garbage.\n" msgstr "" "De verschuivingsfactor wordt niet aangepast,\n" "omdat de hardwareklok eerder rommel bevatte.\n" @@ -5661,7 +5811,9 @@ msgstr "" #: hwclock/hwclock.c:774 #, c-format -msgid "Not adjusting drift factor because it has been less than a day since the last calibration.\n" +msgid "" +"Not adjusting drift factor because it has been less than a day since the " +"last calibration.\n" msgstr "" "De verschuivingsfactor wordt niet aangepast,\n" "omdat de vorige calibratie minder dan één dag geleden is.\n" @@ -5669,7 +5821,8 @@ msgstr "" #: hwclock/hwclock.c:822 #, c-format msgid "" -"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor of %f seconds/day.\n" +"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor " +"of %f seconds/day.\n" "Adjusting drift factor by %f seconds/day\n" msgstr "" "De klok is %.1f seconden verschoven in de laatste %d seconden,\n" @@ -5709,13 +5862,18 @@ msgstr "De parameters voor de verschuivingsaanpassing zijn niet bijgewerkt.\n" #: hwclock/hwclock.c:969 #, c-format -msgid "The Hardware Clock does not contain a valid time, so we cannot adjust it.\n" -msgstr "De hardwareklok bevat geen geldige tijd, zodat die niet aangepast kan worden.\n" +msgid "" +"The Hardware Clock does not contain a valid time, so we cannot adjust it.\n" +msgstr "" +"De hardwareklok bevat geen geldige tijd, zodat die niet aangepast kan " +"worden.\n" #: hwclock/hwclock.c:1000 #, c-format msgid "Needed adjustment is less than one second, so not setting clock.\n" -msgstr "De benodigde aanpassing is minder dan één seconde; de klok wordt niet veranderd.\n" +msgstr "" +"De benodigde aanpassing is minder dan één seconde; de klok wordt niet " +"veranderd.\n" #: hwclock/hwclock.c:1026 #, c-format @@ -5735,11 +5893,13 @@ msgstr "Instellen van de systeemklok is mislukt.\n" #: hwclock/hwclock.c:1156 #, c-format msgid "" -"The kernel keeps an epoch value for the Hardware Clock only on an Alpha machine.\n" +"The kernel keeps an epoch value for the Hardware Clock only on an Alpha " +"machine.\n" "This copy of hwclock was built for a machine other than Alpha\n" "(and thus is presumably not running on an Alpha now). No action taken.\n" msgstr "" -"De kernel bewaart alleen bij Alpha's een tijdperkwaarde voor de hardwareklok.\n" +"De kernel bewaart alleen bij Alpha's een tijdperkwaarde voor de " +"hardwareklok.\n" "Deze versie van 'hwclock' is gemaakt voor een ander systeem dan de Alpha\n" "(en draait nu dus vermoedelijk niet op een Alpha). Geen actie ondernomen.\n" @@ -5755,8 +5915,11 @@ msgstr "Kernel neemt als tijdperkwaarde %lu aan.\n" #: hwclock/hwclock.c:1170 #, c-format -msgid "To set the epoch value, you must use the 'epoch' option to tell to what value to set it.\n" -msgstr "Om de tijdperkwaarde in te stellen dient u de optie --epoch te gebruiken.\n" +msgid "" +"To set the epoch value, you must use the 'epoch' option to tell to what " +"value to set it.\n" +msgstr "" +"Om de tijdperkwaarde in te stellen dient u de optie --epoch te gebruiken.\n" #: hwclock/hwclock.c:1173 #, c-format @@ -5817,7 +5980,8 @@ msgstr "" " --set de hardwareklok instellen op de tijd gegeven met '--date'\n" " --hctosys aan de hand van de hardwareklok de systeemklok instellen\n" " --systohc aan de hand van de systeemklok de hardwareklok instellen\n" -" --adjust de hardwareklok aanpassen ter compensatie van de systematische\n" +" --adjust de hardwareklok aanpassen ter compensatie van de " +"systematische\n" " verschuiving sinds de laatste instelling/aanpassing\n" " --getepoch tijdperkwaarde van de kernel tonen\n" " --setepoch tijdperkwaarde van de kernel instellen op de waarde\n" @@ -5829,10 +5993,12 @@ msgstr "" " --localtime de hardwareklok bevat de lokale tijd\n" " --rtc=BESTAND te gebruiken RTC-bestand in /dev/ in plaats van standaard\n" " --directisa de ISA-bus direct benaderen in plaats van via %s\n" -" --badyear het jaartal van de hardwareklok negeren, omdat de BIOS stuk is\n" +" --badyear het jaartal van de hardwareklok negeren, omdat de BIOS stuk " +"is\n" " --date=TIJD de tijd waarop de hardwareklok moet worden ingesteld\n" " --epoch=JAAR het jaartal dat het tijdperkbegin voor de hardwareklok is\n" -" --noadjfile /etc/adjtime niet gebruiken (vereist '--utc' of '--localtime')\n" +" --noadjfile /etc/adjtime niet gebruiken (vereist '--utc' of '--" +"localtime')\n" " --adjfile=BESTAND te gebruiken verschuivingsregistratiebestand\n" " (standaard is /etc/adjtime)\n" @@ -5868,17 +6034,23 @@ msgstr "" #: hwclock/hwclock.c:1454 #, c-format -msgid "%s: The --utc and --localtime options are mutually exclusive. You specified both.\n" +msgid "" +"%s: The --utc and --localtime options are mutually exclusive. You specified " +"both.\n" msgstr "%s: De opties --utc en --localtime sluiten elkaar uit.\n" #: hwclock/hwclock.c:1461 #, c-format -msgid "%s: The --adjust and --noadjfile options are mutually exclusive. You specified both.\n" +msgid "" +"%s: The --adjust and --noadjfile options are mutually exclusive. You " +"specified both.\n" msgstr "%s: De opties --adjust en --noadjfile sluiten elkaar uit.\n" #: hwclock/hwclock.c:1468 #, c-format -msgid "%s: The --adjfile and --noadjfile options are mutually exclusive. You specified both.\n" +msgid "" +"%s: The --adjfile and --noadjfile options are mutually exclusive. You " +"specified both.\n" msgstr "%s: De opties --adjfile en --noadjfile sluiten elkaar uit.\n" #: hwclock/hwclock.c:1477 @@ -5903,17 +6075,24 @@ msgstr "Sorry, alleen root kan de systeemklok instellen.\n" #: hwclock/hwclock.c:1517 #, c-format -msgid "Sorry, only the superuser can change the Hardware Clock epoch in the kernel.\n" -msgstr "Sorry, alleen root kan in de kernel de tijdperkwaarde voor de klok instellen.\n" +msgid "" +"Sorry, only the superuser can change the Hardware Clock epoch in the " +"kernel.\n" +msgstr "" +"Sorry, alleen root kan in de kernel de tijdperkwaarde voor de klok " +"instellen.\n" #: hwclock/hwclock.c:1537 #, c-format msgid "Cannot access the Hardware Clock via any known method.\n" -msgstr "Kan op geen enkele bekende manier toegang krijgen tot de hardwareklok.\n" +msgstr "" +"Kan op geen enkele bekende manier toegang krijgen tot de hardwareklok.\n" #: hwclock/hwclock.c:1541 #, c-format -msgid "Use the --debug option to see the details of our search for an access method.\n" +msgid "" +"Use the --debug option to see the details of our search for an access " +"method.\n" msgstr "" "Gebruik de optie --debug om alle details over de zoektocht\n" "naar een toegangsmethode te zien.\n" @@ -5996,7 +6175,9 @@ msgstr "ioctl() op %s om bijwerkingsonderbrekingen uit te zetten is mislukt" #: hwclock/rtc.c:285 #, c-format msgid "ioctl() to %s to turn on update interrupts failed unexpectedly" -msgstr "ioctl() op %s om bijwerkingsonderbrekingen aan te zetten is onverwacht mislukt" +msgstr "" +"ioctl() op %s om bijwerkingsonderbrekingen aan te zetten is onverwacht " +"mislukt" #: hwclock/rtc.c:344 #, c-format @@ -6015,7 +6196,10 @@ msgstr "Openen van %s is mislukt" #: hwclock/rtc.c:397 hwclock/rtc.c:443 #, c-format -msgid "To manipulate the epoch value in the kernel, we must access the Linux 'rtc' device driver via the device special file %s. This file does not exist on this system.\n" +msgid "" +"To manipulate the epoch value in the kernel, we must access the Linux 'rtc' " +"device driver via the device special file %s. This file does not exist on " +"this system.\n" msgstr "" "Om de tijdperkwaarde in de kernel aan te kunnen passen, is toegang\n" "tot het 'rtc'-stuurprogramma van Linux nodig via het speciale\n" @@ -6044,11 +6228,13 @@ msgstr "De tijdperkwaarde mag niet minder zijn dan 1900. U vroeg om %ld.\n" #: hwclock/rtc.c:453 #, c-format msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n" -msgstr "Schrijven van tijdperkwaarde op %ld naar %s met ioctl(RTC_EPOCH_SET).\n" +msgstr "" +"Schrijven van tijdperkwaarde op %ld naar %s met ioctl(RTC_EPOCH_SET).\n" #: hwclock/rtc.c:458 #, c-format -msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n" +msgid "" +"The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n" msgstr "Het kernelstuurprogramma voor %s heeft geen ioctl(RTC_EPOCH_SET).\n" #: hwclock/rtc.c:461 @@ -6127,8 +6313,10 @@ msgstr "%s: invoeroverloop" #: login-utils/agetty.c:1203 #, c-format msgid "" -"Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n" -"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n" +"Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H " +"login_host] baud_rate,... line [termtype]\n" +"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] " +"line baud_rate,... [termtype]\n" msgstr "" "Gebruik: %s [-8hiLmUw] [-l inlogprogramma] [-t tijdslimiet] [-H inloghost]\n" " [-I starttekenreeks] baudrate,... lijn [terminalsoort]\n" @@ -6276,7 +6464,9 @@ msgstr "%s: %s is niet gerechtigd om de shell van %s te wijzigen\n" #: login-utils/chsh.c:164 #, c-format -msgid "%s: Running UID doesn't match UID of user we're altering, shell change denied\n" +msgid "" +"%s: Running UID doesn't match UID of user we're altering, shell change " +"denied\n" msgstr "" "%s: Het uitvoerende UID komt niet overeen met de UID van de gebruiker\n" "wiens gegevens worden gewijzigd -- shell-wijziging is geweigerd.\n" @@ -6284,7 +6474,9 @@ msgstr "" #: login-utils/chsh.c:170 #, c-format msgid "%s: Your shell is not in /etc/shells, shell change denied\n" -msgstr "%s: Uw huidige shell staat niet in /etc/shells -- shell-wijziging is geweigerd.\n" +msgstr "" +"%s: Uw huidige shell staat niet in /etc/shells -- shell-wijziging is " +"geweigerd.\n" #: login-utils/chsh.c:177 #, c-format @@ -6376,7 +6568,8 @@ msgstr "Kan %s niet openen om te lezen -- gestopt" #: login-utils/last.c:148 msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n" -msgstr "Gebruik: last [-#] [-f bestand] [-t tty] [-h hostnaam] [gebruiker ...]\n" +msgstr "" +"Gebruik: last [-#] [-f bestand] [-t tty] [-h hostnaam] [gebruiker ...]\n" #: login-utils/last.c:284 msgid " still logged in" @@ -6915,7 +7108,8 @@ msgstr "fout bij stoppen van service: \"%s\"" #: login-utils/ttymsg.c:75 msgid "too many iov's (change code in wall/ttymsg.c)" -msgstr "Interne fout: te veel IOV's [de code in wall/ttymsg.c dient veranderd]" +msgstr "" +"Interne fout: te veel IOV's [de code in wall/ttymsg.c dient veranderd]" #: login-utils/ttymsg.c:85 #, c-format @@ -7126,7 +7320,8 @@ msgstr "logger: onbekende prioriteitsnaam: %s\n" #: misc-utils/logger.c:285 #, c-format -msgid "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n" +msgid "" +"usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n" msgstr "" "Gebruik: logger [-isd] [-f bestand] [-p prioriteit] [-t tag]\n" " [-u socket] [bericht...]\n" @@ -7659,17 +7854,23 @@ msgstr "mount: kan %s niet openen -- %s wordt gebruikt\n" #: mount/fstab.c:596 #, c-format msgid "can't create lock file %s: %s (use -n flag to override)" -msgstr "kan vergrendelingsbestand %s niet aanmaken: %s (gebruik optie '-n' om te forceren)" +msgstr "" +"kan vergrendelingsbestand %s niet aanmaken: %s (gebruik optie '-n' om te " +"forceren)" #: mount/fstab.c:622 #, c-format msgid "can't link lock file %s: %s (use -n flag to override)" -msgstr "kan vergrendelingsbestand %s niet koppelen: %s (gebruik optie '-n' om te forceren)" +msgstr "" +"kan vergrendelingsbestand %s niet koppelen: %s (gebruik optie '-n' om te " +"forceren)" #: mount/fstab.c:638 #, c-format msgid "can't open lock file %s: %s (use -n flag to override)" -msgstr "kan vergrendelingsbestand %s niet openen: %s (gebruik optie '-n' om te forceren)" +msgstr "" +"kan vergrendelingsbestand %s niet openen: %s (gebruik optie '-n' om te " +"forceren)" #: mount/fstab.c:653 #, c-format @@ -7792,7 +7993,9 @@ msgstr "waarschuwing: %s is al gerelateerd aan %s\n" #: mount/lomount.c:670 #, c-format msgid "warning: %s: is write-protected, using read-only.\n" -msgstr "waarschuwing: %s is schrijfbeveiligd en wordt als alleen-lezen aangekoppeld.\n" +msgstr "" +"waarschuwing: %s is schrijfbeveiligd en wordt als alleen-lezen " +"aangekoppeld.\n" #: mount/lomount.c:706 #, c-format @@ -7835,7 +8038,8 @@ msgid "" " %1$s -a | --all list all used\n" " %1$s -d | --detach delete\n" " %1$s -f | --find find unused\n" -" %1$s -j | --associated [-o ] list all associated with \n" +" %1$s -j | --associated [-o ] list all associated with " +"\n" " %1$s [ options ] {-f|--find|loopdev} setup\n" msgstr "" "\n" @@ -7868,7 +8072,8 @@ msgstr "" " -h | --help deze hulptekst tonen\n" " -o | --offset op deze positie in het bestand beginnen\n" " --sizelimit slechts dit aantal bytes van bestand gebruiken\n" -" -p | --pass-fd wachtwoordtekst uit deze bestandsdescriptor lezen\n" +" -p | --pass-fd wachtwoordtekst uit deze bestandsdescriptor " +"lezen\n" " -r | --read-only een alleen-lezen lus-apparaat instellen\n" " --show apparaatnaam tonen (bij '-f ')\n" " -v | --verbose gedetailleerde uitvoer produceren\n" @@ -7891,7 +8096,9 @@ msgstr "%s: apparaat %s is bezig" #: mount/lomount.c:1055 #, c-format msgid "No loop support was available at compile time. Please recompile.\n" -msgstr "Bij het compileren was geen lus-ondersteuning beschikbaar. Hercompilatie is nodig.\n" +msgstr "" +"Bij het compileren was geen lus-ondersteuning beschikbaar. Hercompilatie is " +"nodig.\n" #: mount/mount.c:317 #, c-format @@ -8003,7 +8210,8 @@ msgstr "mount: lus-apparaat %s zal worden gebruikt\n" #: mount/mount.c:953 #, c-format msgid "mount: stolen loop=%s ...trying again\n" -msgstr "mount: lus-apparaat %s is door ander proces afgepakt; ... nieuwe poging\n" +msgstr "" +"mount: lus-apparaat %s is door ander proces afgepakt; ... nieuwe poging\n" #: mount/mount.c:958 #, c-format @@ -8050,7 +8258,8 @@ msgid "mount: according to mtab, %s is already mounted on %s\n" msgstr "mount: volgens mtab is %s al aangekoppeld op %s\n" #: mount/mount.c:1195 -msgid "mount: I could not determine the filesystem type, and none was specified" +msgid "" +"mount: I could not determine the filesystem type, and none was specified" msgstr "mount: kan bestandssysteemsoort niet bepalen, en er is geen aangegeven" #: mount/mount.c:1198 @@ -8096,7 +8305,9 @@ msgstr "mount: aankoppelingspunt %s bestaat niet" #: mount/mount.c:1231 #, c-format msgid "mount: mount point %s is a symbolic link to nowhere" -msgstr "mount: aankoppelingspunt %s is een symbolische koppeling die nergens naar wijst" +msgstr "" +"mount: aankoppelingspunt %s is een symbolische koppeling die nergens naar " +"wijst" #: mount/mount.c:1236 #, c-format @@ -8108,7 +8319,8 @@ msgstr "mount: apparaat %s bestaat niet" msgid "" "mount: special device %s does not exist\n" " (a path prefix is not a directory)\n" -msgstr "mount: apparaat %s bestaat niet (het pad bevat iets dat geen map is)\n" +msgstr "" +"mount: apparaat %s bestaat niet (het pad bevat iets dat geen map is)\n" #: mount/mount.c:1260 #, c-format @@ -8121,7 +8333,8 @@ msgid "" "mount: wrong fs type, bad option, bad superblock on %s,\n" " missing codepage or helper program, or other error" msgstr "" -"mount: onjuiste bestandssysteemsoort, ongeldige optie, ontbrekende codepagina,\n" +"mount: onjuiste bestandssysteemsoort, ongeldige optie, ontbrekende " +"codepagina,\n" " ontbrekend hulpprogramma, slecht superblok op %s, of een andere fout" #: mount/mount.c:1269 @@ -8137,7 +8350,8 @@ msgid "" " (could this be the IDE device where you in fact use\n" " ide-scsi so that sr0 or sda or so is needed?)" msgstr "" -" (is dit misschien een IDE-apparaat waar u in feite ide-scsi gebruikt,\n" +" (is dit misschien een IDE-apparaat waar u in feite ide-scsi " +"gebruikt,\n" " zodat sr0 of sda of iets dergelijks nodig is?)" #: mount/mount.c:1283 @@ -8191,7 +8405,9 @@ msgstr "mount: mogelijk bedoelde u 'vfat'?" #: mount/mount.c:1330 #, c-format msgid "mount: %s has wrong device number or fs type %s not supported" -msgstr "mount: %s heeft onjuist apparaatnummer, of bestandssysteemsoort %s wordt niet ondersteund" +msgstr "" +"mount: %s heeft onjuist apparaatnummer, of bestandssysteemsoort %s wordt " +"niet ondersteund" #: mount/mount.c:1338 #, c-format @@ -8261,9 +8477,12 @@ msgid "" " this file system. For more details see restorecon(8) and mount(8).\n" msgstr "" "mount: %s bevat geen SELinux-labels.\n" -" U hebt zojuist op een SELinux-computer een bestandssysteem aangekoppeld dat\n" -" labels ondersteunt maar er geen bevat. Waarschijnlijk zullen ingeperkte\n" -" programma's AVC-berichten genereren en geen toegang tot dit bestandssysteem\n" +" U hebt zojuist op een SELinux-computer een bestandssysteem aangekoppeld " +"dat\n" +" labels ondersteunt maar er geen bevat. Waarschijnlijk zullen " +"ingeperkte\n" +" programma's AVC-berichten genereren en geen toegang tot dit " +"bestandssysteem\n" " kunnen krijgen. Voor meer details zie restorecon(8) en mount(8).\n" #: mount/mount.c:1488 @@ -8274,7 +8493,8 @@ msgstr "mount: geen soort gegeven -- NFS aangenomen, vanwege de dubbele punt\n" #: mount/mount.c:1494 #, c-format msgid "mount: no type was given - I'll assume cifs because of the // prefix\n" -msgstr "mount: geen soort gegeven -- CIFS aangenomen, vanwege het //-voorvoegsel\n" +msgstr "" +"mount: geen soort gegeven -- CIFS aangenomen, vanwege het //-voorvoegsel\n" #: mount/mount.c:1589 #, c-format @@ -8350,7 +8570,8 @@ msgstr "" "\n" "Een apparaat kan worden opgegeven via de naam, zeg /dev/hda1 of /dev/cdrom,\n" "of via het label, met -L label, of via de UUID, met -U UUID.\n" -"Andere opties zijn: [-nfFrsvw] [-o opties] [-p wachtwoordbestandsdescriptor].\n" +"Andere opties zijn: [-nfFrsvw] [-o opties] [-p " +"wachtwoordbestandsdescriptor].\n" "Voor meer informatie, zie man mount(8).\n" #: mount/mount.c:2035 @@ -8373,7 +8594,8 @@ msgstr "mount: kan %s niet vinden in %s noch in %s" #: mount/mount_mntent.c:165 #, c-format msgid "[mntent]: warning: no final newline at the end of %s\n" -msgstr "[mntent]: waarschuwing: geen afsluitend regeleindeteken aan het eind van %s\n" +msgstr "" +"[mntent]: waarschuwing: geen afsluitend regeleindeteken aan het eind van %s\n" #: mount/mount_mntent.c:216 #, c-format @@ -8423,7 +8645,8 @@ msgid "" msgstr "" "\n" "Gebruik:\n" -" %1$s -a [-e] [-v] alle wisselgeheugens inschakelen die\n" +" %1$s -a [-e] [-v] alle wisselgeheugens inschakelen " +"die\n" " vermeld staan in /etc/fstab\n" " %1$s [-p ] [-v] dit wisselgeheugen inschakelen\n" " %1$s -s gebruikssamenvatting tonen\n" @@ -8661,7 +8884,8 @@ msgstr "umount: alleen root kan dat doen" #: sys-utils/ctrlaltdel.c:27 #, c-format msgid "You must be root to set the Ctrl-Alt-Del behaviour.\n" -msgstr "U moet root zijn om het gedrag van Ctrl-Alt-Del in te kunnen stellen.\n" +msgstr "" +"U moet root zijn om het gedrag van Ctrl-Alt-Del in te kunnen stellen.\n" #: sys-utils/ctrlaltdel.c:42 #, c-format @@ -8682,7 +8906,8 @@ msgstr "" #: sys-utils/cytune.c:125 #, c-format msgid "" -"File %s, For threshold value %lu and timrout value %lu, Maximum characters in fifo were %d,\n" +"File %s, For threshold value %lu and timrout value %lu, Maximum characters " +"in fifo were %d,\n" "and the maximum transfer rate in characters/second was %f\n" msgstr "" "Voor bestand %s, en met drempelwaarde %lu en tijdslimiet %lu,\n" @@ -8716,7 +8941,9 @@ msgstr "Ongeldige standaardwaarde voor tijdslimiet: %s\n" #: sys-utils/cytune.c:238 #, c-format -msgid "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [file...]\n" +msgid "" +"Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) " +"[-g|-G] file [file...]\n" msgstr "" "Gebruik: %s [-q [-i interval]] ([-s waarde]|[-S waarde])\n" " ([-t waarde]|[-T waarde]) [-g|-G] bestand [bestand ...]\n" @@ -8772,7 +8999,8 @@ msgstr "Kan ioctl(CYGETMON) niet uitvoeren op %s: %s\n" #: sys-utils/cytune.c:418 #, c-format -msgid "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" +msgid "" +"%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" msgstr "" "%s: %lu onderbrekingen, %lu/%lu tekens;\n" "fifo: %lu drempelwaarde, %lu tijdslimiet, %lu maximum, %lu nu\n" @@ -8784,7 +9012,8 @@ msgstr " %f onderbrekingen/sec; %f ontvangen, %f verzonden (tekens/sec)\n" #: sys-utils/cytune.c:429 #, c-format -msgid "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" +msgid "" +"%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" msgstr "" "%s: %lu onderbrekingen, %lu tekens;\n" "fifo: %lu drempelwaarde, %lu tijdslimiet, %lu maximum, %lu nu\n" @@ -8902,8 +9131,10 @@ msgstr " %s -h (voor hulp)\n" #: sys-utils/ipcs.c:130 #, c-format -msgid "%s provides information on ipc facilities for which you have read access.\n" -msgstr "%s geeft informatie over IPC-voorzieningen waarvoor u leestoegang hebt.\n" +msgid "" +"%s provides information on ipc facilities for which you have read access.\n" +msgstr "" +"%s geeft informatie over IPC-voorzieningen waarvoor u leestoegang hebt.\n" #: sys-utils/ipcs.c:132 #, c-format @@ -9485,10 +9716,12 @@ msgstr "kan er geen achtergrondservice van maken" #: sys-utils/rdev.c:69 msgid "usage: rdev [ -rv ] [ -o OFFSET ] [ IMAGE [ VALUE [ OFFSET ] ] ]" -msgstr "Gebruik: rdev [ -rv ] [ -o PLAATS ] [ AFBEELDING [ WAARDE [ PLAATS ] ] ]" +msgstr "" +"Gebruik: rdev [ -rv ] [ -o PLAATS ] [ AFBEELDING [ WAARDE [ PLAATS ] ] ]" #: sys-utils/rdev.c:70 -msgid " rdev /dev/fd0 (or rdev /linux, etc.) displays the current ROOT device" +msgid "" +" rdev /dev/fd0 (or rdev /linux, etc.) displays the current ROOT device" msgstr " rdev /dev/fd0 (of rdev /linux, enz.) huidig ROOT-apparaat tonen" #: sys-utils/rdev.c:71 @@ -9497,7 +9730,8 @@ msgstr " rdev /dev/fd0 /dev/hda2 ROOT instellen op /dev/hda2" #: sys-utils/rdev.c:72 msgid " rdev -R /dev/fd0 1 set the ROOTFLAGS (readonly status)" -msgstr " rdev -R /dev/fd0 1 ROOTFLAGS instellen (alleen-lezenstatus)" +msgstr "" +" rdev -R /dev/fd0 1 ROOTFLAGS instellen (alleen-lezenstatus)" #: sys-utils/rdev.c:73 msgid " rdev -r /dev/fd0 627 set the RAMDISK size" @@ -9524,7 +9758,8 @@ msgid " vidmode ... same as rdev -v" msgstr " vidmode ... is hetzelfde als rdev -v" #: sys-utils/rdev.c:79 -msgid "Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..." +msgid "" +"Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..." msgstr "" "Opmerking: videomodi zijn: -3=vragen, -2=uitgebreid, -1=gewoon,\n" " 1=sleutel1, 2=sleutel2, ..." @@ -9801,7 +10036,8 @@ msgstr "" msgid "" " -h, --help displays this help text\n" " -v, --verbose says what options are being switched on\n" -" -R, --addr-no-randomize disables randomization of the virtual address space\n" +" -R, --addr-no-randomize disables randomization of the virtual address " +"space\n" " -F, --fdpic-funcptrs makes function pointers point to descriptors\n" " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n" " -L, --addr-compat-layout changes the way virtual memory is allocated\n" @@ -9810,7 +10046,8 @@ msgid "" " -I, --short-inode turns on SHORT_INODE\n" " -S, --whole-seconds turns on WHOLE_SECONDS\n" " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n" -" -3, --3gb limits the used address space to a maximum of 3 GB\n" +" -3, --3gb limits the used address space to a maximum of 3 " +"GB\n" " --4gb ignored (for backward compatibility only)\n" msgstr "" " -h, --help deze hulptekst tonen\n" @@ -9825,7 +10062,8 @@ msgstr "" " -X, --read-implies-exec READ_IMPLIES_EXEC inschakelen\n" " -Z, --mmap-page-zero MMAP_PAGE_ZERO inschakelen\n" " -3, --3gb gebruikte adresruimte tot 3 GB beperken\n" -" --4gb (genegeerd, slechts herkend voor compatibiliteit)\n" +" --4gb (genegeerd, slechts herkend voor " +"compatibiliteit)\n" #: sys-utils/setarch.c:131 #, c-format @@ -9987,10 +10225,12 @@ msgstr "hexdump: ongeldige waarde voor over_te_slaan_aantal\n" #: text-utils/hexsyntax.c:131 #, c-format -msgid "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n" +msgid "" +"hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n" msgstr "" "Gebruik: hexdump [-bcCdovx] [-e opmaaktekenreeks] [-f opmaakbestand]\n" -" [-n te_interpreteren_aantal] [-s over_te_slaan_aantal] [bestand ...]\n" +" [-n te_interpreteren_aantal] [-s over_te_slaan_aantal] " +"[bestand ...]\n" #: text-utils/more.c:256 #, c-format @@ -10075,7 +10315,8 @@ msgstr "" #: text-utils/more.c:1294 msgid "" "\n" -"Most commands optionally preceded by integer argument k. Defaults in brackets.\n" +"Most commands optionally preceded by integer argument k. Defaults in " +"brackets.\n" "Star (*) indicates argument becomes new default.\n" msgstr "" "\n" @@ -10106,7 +10347,8 @@ msgid "" ". Repeat previous command\n" msgstr "" " De volgende k regels tonen [huidige schermgrootte]\n" -"z De volgende k regels tonen [huidige schermgrootte]*\n" +"z De volgende k regels tonen [huidige schermgrootte]" +"*\n" " De volgende k regels tonen [1]*\n" "d of ctrl-D De tekst k regels scrollen [11]*\n" "q of Q of Afsluiten\n" @@ -10115,7 +10357,8 @@ msgstr "" "b of ctrl-B Een scherm terug en k schermen overslaan [1]\n" "= Huidige regelnummer tonen\n" "/ De k-de overeenkomst van deze expressie zoeken [1]\n" -"n De k-de overeenkomst van vorige expressie zoeken [1]\n" +"n De k-de overeenkomst van vorige expressie zoeken " +"[1]\n" "' Terug naar waar de vorige zoekopdracht startte\n" "! of :! De opdracht in een subshell uitvoeren\n" "v Editor starten (beginnend op de huidige regel)\n" @@ -10243,7 +10486,8 @@ msgstr "hexdump: ongeldig conversieteken %%%s\n" #: text-utils/pg.c:235 #, c-format -msgid "%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n" +msgid "" +"%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n" msgstr "" "%s: Gebruik: %s [-aantal_regels_per_pagina] [-p te_gebruiken_prompt]\n" " [-cefnrs] [+regelnummer] [+/patroon/] [bestand ...]\n" diff --git a/po/vi.po b/po/vi.po index 7f224b95..aeffb821 100644 --- a/po/vi.po +++ b/po/vi.po @@ -778,7 +778,8 @@ msgstr "mkfs (%s)\n" #: disk-utils/mkfs.cramfs.c:124 #, c-format msgid "" -"usage: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname outfile\n" +"usage: %s [-h] [-v] [-b blksize] [-e edition] [-i file] [-n name] dirname " +"outfile\n" " -h print this help\n" " -v be verbose\n" " -E make all warnings errors (non-zero exit status)\n" @@ -792,7 +793,8 @@ msgid "" " dirname root of the filesystem to be compressed\n" " outfile output file\n" msgstr "" -"Sử dụng: %s [-h] [-v] [-b cỡ_khối] [-e lần_in] [-i tập_tin] [-n tên] tên_thư_mục tập_tin_ra\n" +"Sử dụng: %s [-h] [-v] [-b cỡ_khối] [-e lần_in] [-i tập_tin] [-n tên] " +"tên_thư_mục tập_tin_ra\n" " -h\t\tin ra trợ giúp này\n" " -v\t\tthông báo chi tiết\n" " -E\t\tkhiến tất cả cảnh báo thành lỗi (trạng thái thoát khác không)\n" @@ -813,7 +815,8 @@ msgid "" " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting.\n" msgstr "" "Tìm thấy tên tập tin rất dài (%zu bytes) « %s ».\n" -" Xin hãy tăng giá trị « MAX_INPUT_NAMELEN » trong tập tin « mkcramfs.c » rồi biên dịch lại. Đang thoát.\n" +" Xin hãy tăng giá trị « MAX_INPUT_NAMELEN » trong tập tin « mkcramfs.c » rồi " +"biên dịch lại. Đang thoát.\n" #: disk-utils/mkfs.cramfs.c:464 #, c-format @@ -832,8 +835,12 @@ msgstr "%6.2f%% (%+ld byte)\t%s\n" #: disk-utils/mkfs.cramfs.c:829 #, c-format -msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB. We might die prematurely.\n" -msgstr "cảnh báo : số ước lượng của kích cỡ yêu cầu (giới hạn trên) là %lld MB, nhưng kích cỡ ảnh lớn nhất là %u MB. Chúng ta có thể chết non.\n" +msgid "" +"warning: guestimate of required size (upper bound) is %lldMB, but maximum " +"image size is %uMB. We might die prematurely.\n" +msgstr "" +"cảnh báo : số ước lượng của kích cỡ yêu cầu (giới hạn trên) là %lld MB, " +"nhưng kích cỡ ảnh lớn nhất là %u MB. Chúng ta có thể chết non.\n" #: disk-utils/mkfs.cramfs.c:856 msgid "ROM image map" @@ -895,13 +902,19 @@ msgstr "cảnh báo : kích cỡ tập tin bị cắt ngắn thành %luMB (trừ #: disk-utils/mkfs.cramfs.c:933 #, c-format -msgid "warning: uids truncated to %u bits. (This may be a security concern.)\n" -msgstr "cảnh báo : UID bị cắt ngắn thành %u bit. (Đây có thể là sự lo ngại bảo mật.)\n" +msgid "" +"warning: uids truncated to %u bits. (This may be a security concern.)\n" +msgstr "" +"cảnh báo : UID bị cắt ngắn thành %u bit. (Đây có thể là sự lo ngại bảo " +"mật.)\n" #: disk-utils/mkfs.cramfs.c:938 #, c-format -msgid "warning: gids truncated to %u bits. (This may be a security concern.)\n" -msgstr "cảnh báo : GID bị cắt ngắn thành %u bit. (Đây có thể là sự lo ngại bảo mật.)\n" +msgid "" +"warning: gids truncated to %u bits. (This may be a security concern.)\n" +msgstr "" +"cảnh báo : GID bị cắt ngắn thành %u bit. (Đây có thể là sự lo ngại bảo " +"mật.)\n" #: disk-utils/mkfs.cramfs.c:943 #, c-format @@ -909,7 +922,8 @@ msgid "" "WARNING: device numbers truncated to %u bits. This almost certainly means\n" "that some device files will be wrong.\n" msgstr "" -"CẢNH BÁO : số thiết bị cắt ngắn thành %u bit. Điều này gần chắc chắn có nghĩa là\n" +"CẢNH BÁO : số thiết bị cắt ngắn thành %u bit. Điều này gần chắc chắn có " +"nghĩa là\n" "một vài tập tin thiết bị sẽ bị hỏng.\n" #: disk-utils/mkfs.minix.c:160 @@ -924,7 +938,8 @@ msgstr "%s đã được gắn, sẽ không tạo hệ thống tập tin ở đ #: disk-utils/mkfs.minix.c:194 msgid "seek to boot block failed in write_tables" -msgstr "tìm tới khối khởi động không thành công trong write_tables (ghi các bảng)" +msgstr "" +"tìm tới khối khởi động không thành công trong write_tables (ghi các bảng)" #: disk-utils/mkfs.minix.c:196 msgid "unable to clear boot sector" @@ -1063,7 +1078,8 @@ msgstr "Kích cỡ trang do người dùng chỉ ra xấu %d\n" #: disk-utils/mkswap.c:156 #, c-format msgid "Using user-specified page size %d, instead of the system value %d\n" -msgstr "Sử dụng kích cỡ trang do người dùng chỉ ra %d, thay cho giá trị hệ thống %d\n" +msgstr "" +"Sử dụng kích cỡ trang do người dùng chỉ ra %d, thay cho giá trị hệ thống %d\n" #: disk-utils/mkswap.c:180 #, c-format @@ -1087,8 +1103,11 @@ msgstr "không uuid\n" #: disk-utils/mkswap.c:328 #, c-format -msgid "Usage: %s [-c] [-v0|-v1] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n" -msgstr "Sử dụng: %s [-c] [-v0|-v1] [-pKÍCH_CỠ_TRANG] [-L nhãn] [-U UUID] /dev/tên [các_khối]\n" +msgid "" +"Usage: %s [-c] [-v0|-v1] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n" +msgstr "" +"Sử dụng: %s [-c] [-v0|-v1] [-pKÍCH_CỠ_TRANG] [-L nhãn] [-U UUID] /dev/tên " +"[các_khối]\n" #: disk-utils/mkswap.c:351 msgid "too many bad pages" @@ -1273,7 +1292,8 @@ msgstr "Đĩa đã được thay đổi.\n" #: fdisk/cfdisk.c:413 #, c-format msgid "Reboot the system to ensure the partition table is correctly updated.\n" -msgstr "Khởi động lại hệ thống để đảm bảo là bảng phân vùng được cập nhật đúng.\n" +msgstr "" +"Khởi động lại hệ thống để đảm bảo là bảng phân vùng được cập nhật đúng.\n" #: fdisk/cfdisk.c:417 #, c-format @@ -1345,11 +1365,13 @@ msgid "enlarged logical partitions overlap" msgstr "phân vùng lôgíc mở rộng chồng lên nhau" #: fdisk/cfdisk.c:999 -msgid "!!!! Internal error creating logical drive with no extended partition !!!!" +msgid "" +"!!!! Internal error creating logical drive with no extended partition !!!!" msgstr "!!!! Lỗi nội bộ khi tạo các ổ lôgíc mà không có phân vùng mở rộng !!!!" #: fdisk/cfdisk.c:1010 fdisk/cfdisk.c:1022 -msgid "Cannot create logical drive here -- would create two extended partitions" +msgid "" +"Cannot create logical drive here -- would create two extended partitions" msgstr "Không thể tạo ổ lôgíc ở đây -- vì như thế sẽ tạo hai phân vùng mở rộng" #: fdisk/cfdisk.c:1164 @@ -1358,7 +1380,8 @@ msgstr "Mục trình đơn quá dài. Trình đơn có thể trông lạc lõng. #: fdisk/cfdisk.c:1220 msgid "Menu without direction. Defaulting to horizontal." -msgstr "Trình đơn không có phương hướng nên dùng thiết lập mặc định (nằm ngang)." +msgstr "" +"Trình đơn không có phương hướng nên dùng thiết lập mặc định (nằm ngang)." #: fdisk/cfdisk.c:1351 msgid "Illegal key" @@ -1455,8 +1478,11 @@ msgid "Opened disk read-only - you have no permission to write" msgstr "Mở đĩa chỉ đọc - bạn không có quyền ghi" #: fdisk/cfdisk.c:1682 -msgid "Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted." -msgstr "Cảnh báo : phát hiện GPT (bảng phân vùng GUID) không được hỗ trợ. Hãy dùng chương trình GNU Parted." +msgid "" +"Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted." +msgstr "" +"Cảnh báo : phát hiện GPT (bảng phân vùng GUID) không được hỗ trợ. Hãy dùng " +"chương trình GNU Parted." #: fdisk/cfdisk.c:1699 msgid "Cannot get disk size" @@ -1475,7 +1501,8 @@ msgid "Warning!! This may destroy data on your disk!" msgstr "Cảnh báo : có thể sẽ xóa hết dữ liệu trên đĩa của bạn." #: fdisk/cfdisk.c:1874 -msgid "Are you sure you want to write the partition table to disk? (yes or no): " +msgid "" +"Are you sure you want to write the partition table to disk? (yes or no): " msgstr "Bạn có chắc muốn ghi bảng phân vùng lên đĩa không? (có hoặc không): " #: fdisk/cfdisk.c:1880 @@ -1503,16 +1530,24 @@ msgid "Wrote partition table to disk" msgstr "Đã ghi bảng phân vùng lên đĩa" #: fdisk/cfdisk.c:1919 -msgid "Wrote partition table, but re-read table failed. Reboot to update table." -msgstr "Đã ghi bảng phân vùng, nhưng việc đọc lại thất bại. Hãy khởi động lại để cập nhật bảng." +msgid "" +"Wrote partition table, but re-read table failed. Reboot to update table." +msgstr "" +"Đã ghi bảng phân vùng, nhưng việc đọc lại thất bại. Hãy khởi động lại để " +"cập nhật bảng." #: fdisk/cfdisk.c:1929 msgid "No primary partitions are marked bootable. DOS MBR cannot boot this." -msgstr "Không có phân vùng chính nào được đánh dấu có thể khởi động. MBR (mục ghi khởi động chủ) của DOS không thể khởi động trong trường hợp này." +msgstr "" +"Không có phân vùng chính nào được đánh dấu có thể khởi động. MBR (mục ghi " +"khởi động chủ) của DOS không thể khởi động trong trường hợp này." #: fdisk/cfdisk.c:1931 -msgid "More than one primary partition is marked bootable. DOS MBR cannot boot this." -msgstr "Có vài phân vùng chính được đánh dấu là có thể khởi động. MBR (mục ghi khởi động chủ) của DOS không thể khởi động trong trường hợp này." +msgid "" +"More than one primary partition is marked bootable. DOS MBR cannot boot this." +msgstr "" +"Có vài phân vùng chính được đánh dấu là có thể khởi động. MBR (mục ghi khởi " +"động chủ) của DOS không thể khởi động trong trường hợp này." #: fdisk/cfdisk.c:1989 fdisk/cfdisk.c:2108 fdisk/cfdisk.c:2192 msgid "Enter filename or press RETURN to display on screen: " @@ -1581,12 +1616,20 @@ msgid " First Last\n" msgstr " Đầu Cuối\n" #: fdisk/cfdisk.c:2130 -msgid " # Type Sector Sector Offset Length Filesystem Type (ID) Flag\n" -msgstr " # Loại Rãnh ghi Rãnh ghi Hiệu Độ dài Kiểu hệ thống tập tin (ID) Cờ\n" +msgid "" +" # Type Sector Sector Offset Length Filesystem Type (ID) " +"Flag\n" +msgstr "" +" # Loại Rãnh ghi Rãnh ghi Hiệu Độ dài Kiểu hệ thống tập " +"tin (ID) Cờ\n" #: fdisk/cfdisk.c:2131 -msgid "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n" -msgstr "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n" +msgid "" +"-- ------- ----------- ----------- ------ ----------- -------------------- " +"----\n" +msgstr "" +"-- ------- ----------- ----------- ------ ----------- -------------------- " +"----\n" #: fdisk/cfdisk.c:2214 msgid " ---Starting---- ----Ending----- Start Number of\n" @@ -1598,7 +1641,8 @@ msgstr " #Cờ Rãnh Đầu Trụ ID Rãnh Đầu Trụ Rãnh ghi R #: fdisk/cfdisk.c:2216 msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n" -msgstr "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n" +msgstr "" +"-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n" #: fdisk/cfdisk.c:2249 msgid "Raw" @@ -1666,7 +1710,9 @@ msgstr " d Xóa phân vùng hiện thời" #: fdisk/cfdisk.c:2292 msgid " g Change cylinders, heads, sectors-per-track parameters" -msgstr " g Thay đổi các tham số : cylinders (hình trụ), heads (đầu đọc), sectors-per-track (số rãnh ghi trên mỗi rãnh)" +msgstr "" +" g Thay đổi các tham số : cylinders (hình trụ), heads (đầu đọc), " +"sectors-per-track (số rãnh ghi trên mỗi rãnh)" #: fdisk/cfdisk.c:2293 msgid " WARNING: This option should only be used by people who" @@ -1710,7 +1756,8 @@ msgstr " mà bạn có thể chọn:" #: fdisk/cfdisk.c:2303 msgid " r - Raw data (exactly what would be written to disk)" -msgstr " r - Dữ liệu thô (là những gì chính xác sẽ được ghi lên đĩa)" +msgstr "" +" r - Dữ liệu thô (là những gì chính xác sẽ được ghi lên đĩa)" #: fdisk/cfdisk.c:2304 msgid " s - Table ordered by sectors" @@ -1956,7 +2003,9 @@ msgstr "Lớn nhất" #: fdisk/cfdisk.c:2744 msgid "Maximize disk usage of the current partition (experts only)" -msgstr "Đặt phân vùng hiện thời dùng vùng lớn nhất có thể trên đĩa (chỉ dành cho người có kinh nghiệm)" +msgstr "" +"Đặt phân vùng hiện thời dùng vùng lớn nhất có thể trên đĩa (chỉ dành cho " +"người có kinh nghiệm)" #: fdisk/cfdisk.c:2745 msgid "New" @@ -2325,7 +2374,8 @@ msgstr "" #: fdisk/fdiskbsdlabel.c:356 #, c-format msgid "# start end size fstype [fsize bsize cpg]\n" -msgstr "# đầu cuối kích cỡ hệthống [cỡ_tệp cỡ_khối cpg]\n" +msgstr "" +"# đầu cuối kích cỡ hệthống [cỡ_tệp cỡ_khối cpg]\n" #: fdisk/fdiskbsdlabel.c:405 fdisk/fdiskbsdlabel.c:408 #, c-format @@ -2468,7 +2518,8 @@ msgstr "" "V.d.: fdisk /dev/hda (cho đĩa IDE đầu tiên)\n" " hay: fdisk /dev/sdc (cho đĩa SCSI thứ ba)\n" " hay: fdisk /dev/eda (cho ổ PS/2 ESDI đầu tiên)\n" -" hay: fdisk /dev/rd/c0d0 hay: fdisk /dev/ida/c0d0 (cho các thiết bị RAID)\n" +" hay: fdisk /dev/rd/c0d0 hay: fdisk /dev/ida/c0d0 (cho các thiết bị " +"RAID)\n" " ...\n" #: fdisk/fdisk.c:262 @@ -2758,7 +2809,9 @@ msgstr "" #: fdisk/fdisk.c:1017 #, c-format -msgid "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel\n" +msgid "" +"Device contains neither a valid DOS partition table, nor Sun, SGI or OSF " +"disklabel\n" msgstr "Thiết bị chứa một bảng phân vùng DOS, hay Sun, SGI hay OSF bị lỗi\n" #: fdisk/fdisk.c:1034 @@ -2773,8 +2826,12 @@ msgstr "Bỏ qua các phân vùng mở rộng dự phòng %d\n" #: fdisk/fdisk.c:1059 #, c-format -msgid "Warning: invalid flag 0x%04x of partition table %d will be corrected by w(rite)\n" -msgstr "Cảnh báo : cờ 0x%04x của bảng phân vùng %d bị lỗi sẽ được sửa bởi w(rite) (ghi nhớ)\n" +msgid "" +"Warning: invalid flag 0x%04x of partition table %d will be corrected by w" +"(rite)\n" +msgstr "" +"Cảnh báo : cờ 0x%04x của bảng phân vùng %d bị lỗi sẽ được sửa bởi w(rite) " +"(ghi nhớ)\n" #: fdisk/fdisk.c:1081 #, c-format @@ -2940,7 +2997,8 @@ msgstr "Kiểu hệ thống của phân vùng %d chưa thay đổi: %x (%s)\n" #: fdisk/fdisk.c:1576 #, c-format msgid "Partition %d has different physical/logical beginnings (non-Linux?):\n" -msgstr "Phân vùng %d có điểm khởi đầu vật lý/lôgíc khác nhay (không phải Linux?):\n" +msgstr "" +"Phân vùng %d có điểm khởi đầu vật lý/lôgíc khác nhay (không phải Linux?):\n" #: fdisk/fdisk.c:1578 fdisk/fdisk.c:1586 fdisk/fdisk.c:1595 fdisk/fdisk.c:1605 #, c-format @@ -3127,7 +3185,8 @@ msgstr "%lld rãnh ghi không được phân phối\n" #: fdisk/fdisk.c:2007 fdisk/fdisksgilabel.c:633 fdisk/fdisksunlabel.c:413 #, c-format msgid "Partition %d is already defined. Delete it before re-adding it.\n" -msgstr "Phân vùng %d đã được xác định. Hãy xóa nó trước khi thêm lại lần nữa\n" +msgstr "" +"Phân vùng %d đã được xác định. Hãy xóa nó trước khi thêm lại lần nữa\n" #: fdisk/fdisk.c:2049 #, c-format @@ -3297,11 +3356,13 @@ msgstr "Cảnh báo : thiết lập hiệu số rãnh ghi cho tương thích DOS #, c-format msgid "" "\n" -"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't support GPT. Use GNU Parted.\n" +"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't " +"support GPT. Use GNU Parted.\n" "\n" msgstr "" "\n" -"CẢNH BÁO : phát hiện GPT (bảng phân vùng GUID) trên « %s ». Tiện ích fdisk không hỗ trợ GPT. Hãy dùng chương trình GNU Parted.\n" +"CẢNH BÁO : phát hiện GPT (bảng phân vùng GUID) trên « %s ». Tiện ích fdisk " +"không hỗ trợ GPT. Hãy dùng chương trình GNU Parted.\n" "\n" #: fdisk/fdisk.c:2512 @@ -3331,8 +3392,12 @@ msgstr "Nhân này tự tìm kích cỡ rãnh ghi - tùy chọn -b bị bỏ qua #: fdisk/fdisk.c:2635 #, c-format -msgid "Warning: the -b (set sector size) option should be used with one specified device\n" -msgstr "Cảnh báo: tùy chọn -b (đặt kích cỡ rãnh ghi) cần sử dụng với một thiết bị xác định\n" +msgid "" +"Warning: the -b (set sector size) option should be used with one specified " +"device\n" +msgstr "" +"Cảnh báo: tùy chọn -b (đặt kích cỡ rãnh ghi) cần sử dụng với một thiết bị " +"xác định\n" #: fdisk/fdisk.c:2695 #, c-format @@ -3470,8 +3535,12 @@ msgstr "Linux RAID" #: fdisk/fdisksgilabel.c:164 #, c-format -msgid "According to MIPS Computer Systems, Inc the Label must not contain more than 512 bytes\n" -msgstr "Tùy theo MIPS Computer Systems, Inc. thì Nhãn không được chứa nhiều hơn 512 byte\n" +msgid "" +"According to MIPS Computer Systems, Inc the Label must not contain more than " +"512 bytes\n" +msgstr "" +"Tùy theo MIPS Computer Systems, Inc. thì Nhãn không được chứa nhiều hơn 512 " +"byte\n" #: fdisk/fdisksgilabel.c:183 #, c-format @@ -3753,9 +3822,11 @@ msgstr "" #: fdisk/fdisksgilabel.c:730 fdisk/fdisksunlabel.c:226 #, c-format msgid "" -"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %d.\n" +"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %" +"d.\n" "This value may be truncated for devices > 33.8 GB.\n" -msgstr "Cảnh báo: BLKGETSIZE ioctl lỗi trên %s. Sử dụng giá trị cấu trúc trụ là %d.\n" +msgstr "" +"Cảnh báo: BLKGETSIZE ioctl lỗi trên %s. Sử dụng giá trị cấu trúc trụ là %d.\n" #: fdisk/fdisksgilabel.c:743 #, c-format @@ -3845,8 +3916,11 @@ msgstr "Tìm thấy nhãn đĩa Sun với số phân vùng (num_partitions) sai #: fdisk/fdisksunlabel.c:168 #, c-format -msgid "Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n" -msgstr "Cảnh báo : các giá trị không đúng cần phải được sửa chữa nên sẽ được sửa bởi w(rite) (ghi nhớ)\n" +msgid "" +"Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n" +msgstr "" +"Cảnh báo : các giá trị không đúng cần phải được sửa chữa nên sẽ được sửa bởi " +"w(rite) (ghi nhớ)\n" #: fdisk/fdisksunlabel.c:198 #, c-format @@ -4486,18 +4560,28 @@ msgstr "" #: fdisk/sfdisk.c:607 #, c-format -msgid "%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n" -msgstr "%s của phân vùng %s có số đầu đọc không thể có: %lu (phải trong khoảng 0-%lu)\n" +msgid "" +"%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n" +msgstr "" +"%s của phân vùng %s có số đầu đọc không thể có: %lu (phải trong khoảng 0-%" +"lu)\n" #: fdisk/sfdisk.c:612 #, c-format -msgid "%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)\n" -msgstr "%s của phân vùng %s có số rãnh ghi không thể có: %lu (phải trong khoảng 1-%lu)\n" +msgid "" +"%s of partition %s has impossible value for sector: %lu (should be in 1-%" +"lu)\n" +msgstr "" +"%s của phân vùng %s có số rãnh ghi không thể có: %lu (phải trong khoảng 1-%" +"lu)\n" #: fdisk/sfdisk.c:617 #, c-format -msgid "%s of partition %s has impossible value for cylinders: %lu (should be in 0-%lu)\n" -msgstr "%s của phân vùng %s có số trụ không thể có: %lu (phải trong khoảng 1-%lu)\n" +msgid "" +"%s of partition %s has impossible value for cylinders: %lu (should be in 0-%" +"lu)\n" +msgstr "" +"%s của phân vùng %s có số trụ không thể có: %lu (phải trong khoảng 1-%lu)\n" #: fdisk/sfdisk.c:657 #, c-format @@ -4768,8 +4852,10 @@ msgstr "đầu" #: fdisk/sfdisk.c:1347 #, c-format -msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" -msgstr "phân vùng %s: đầu: (c,h,s) mong đợi (%ld,%ld,%ld) tìm thấy (%ld,%ld,%ld)\n" +msgid "" +"partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" +msgstr "" +"phân vùng %s: đầu: (c,h,s) mong đợi (%ld,%ld,%ld) tìm thấy (%ld,%ld,%ld)\n" #: fdisk/sfdisk.c:1353 msgid "end" @@ -4778,7 +4864,8 @@ msgstr "cuối" #: fdisk/sfdisk.c:1356 #, c-format msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n" -msgstr "phân vùng %s: cuối: (c,h,s) mong đợi (%ld,%ld,%ld) tìm thấy (%ld,%ld,%ld)\n" +msgstr "" +"phân vùng %s: cuối: (c,h,s) mong đợi (%ld,%ld,%ld) tìm thấy (%ld,%ld,%ld)\n" #: fdisk/sfdisk.c:1359 #, c-format @@ -4963,15 +5050,19 @@ msgstr " -l [hay --list]: liệt kê các phân vùng của mỗi thiế #: fdisk/sfdisk.c:2298 msgid " -d [or --dump]: idem, but in a format suitable for later input" -msgstr " -d [hay --dump]: cũng như trên nhưng ở dạng có thể dùng cho nhập vào" +msgstr "" +" -d [hay --dump]: cũng như trên nhưng ở dạng có thể dùng cho nhập vào" #: fdisk/sfdisk.c:2299 msgid " -i [or --increment]: number cylinders etc. from 1 instead of from 0" msgstr " -i [hay --increment]: số trụ v.v... từ 1 thay vì từ 0" #: fdisk/sfdisk.c:2300 -msgid " -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/MB" -msgstr " -uS, -uB, -uC, -uM: chấp nhận/báo cáo với đơn vị rãnh ghi/khối/trụ/MB" +msgid "" +" -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/" +"MB" +msgstr "" +" -uS, -uB, -uC, -uM: chấp nhận/báo cáo với đơn vị rãnh ghi/khối/trụ/MB" #: fdisk/sfdisk.c:2301 msgid " -T [or --list-types]:list the known partition types" @@ -4979,7 +5070,9 @@ msgstr " -T [hay --list-types]:\t\tliệt kê các kiểu phân vùng đã bi #: fdisk/sfdisk.c:2302 msgid " -D [or --DOS]: for DOS-compatibility: waste a little space" -msgstr " -D [hay --DOS]: để tương thích với DOS: lãng phí một chút khoảng trống" +msgstr "" +" -D [hay --DOS]: để tương thích với DOS: lãng phí một chút khoảng " +"trống" #: fdisk/sfdisk.c:2303 msgid " -R [or --re-read]: make kernel reread partition table" @@ -4994,8 +5087,10 @@ msgid " -n : do not actually write to disk" msgstr " -n : không thực sự viết lên đĩa" #: fdisk/sfdisk.c:2306 -msgid " -O file : save the sectors that will be overwritten to file" -msgstr " -O tập tin : ghi các rãnh ghi sẽ bị ghi chèn vào tập tin" +msgid "" +" -O file : save the sectors that will be overwritten to file" +msgstr "" +" -O tập tin : ghi các rãnh ghi sẽ bị ghi chèn vào tập tin" #: fdisk/sfdisk.c:2307 msgid " -I file : restore these sectors again" @@ -5015,11 +5110,15 @@ msgstr "tùy chọn nguy hiểm:" #: fdisk/sfdisk.c:2311 msgid " -g [or --show-geometry]: print the kernel's idea of the geometry" -msgstr " -g [hay --show-geometry]: in ra cấu trúc đĩa theo quan niệm của nhân" +msgstr "" +" -g [hay --show-geometry]: in ra cấu trúc đĩa theo quan niệm của nhân" #: fdisk/sfdisk.c:2312 -msgid " -G [or --show-pt-geometry]: print geometry guessed from the partition table" -msgstr " -G [hay --show-pt-geometry]: in ra cấu trúc dự đoán từ bảng phân vùng" +msgid "" +" -G [or --show-pt-geometry]: print geometry guessed from the partition " +"table" +msgstr "" +" -G [hay --show-pt-geometry]: in ra cấu trúc dự đoán từ bảng phân vùng" #: fdisk/sfdisk.c:2313 msgid "" @@ -5031,8 +5130,11 @@ msgstr "" " trong đầu vào" #: fdisk/sfdisk.c:2315 -msgid " -L [or --Linux]: do not complain about things irrelevant for Linux" -msgstr " -L [hay --Linux]: không than phiền về những gì không thích hợp với Linux" +msgid "" +" -L [or --Linux]: do not complain about things irrelevant for Linux" +msgstr "" +" -L [hay --Linux]: không than phiền về những gì không thích hợp với " +"Linux" #: fdisk/sfdisk.c:2316 msgid " -q [or --quiet]: suppress warning messages" @@ -5074,7 +5176,8 @@ msgstr "%s thiết bị\t\t liệt kê phân vùng kích hoạt trên thiết b #: fdisk/sfdisk.c:2330 #, c-format msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n" -msgstr "%s thiết bị n1 n2 ... kích hoạt phân vùng n1 ..., bỏ kích hoạt phần còn lại\n" +msgstr "" +"%s thiết bị n1 n2 ... kích hoạt phân vùng n1 ..., bỏ kích hoạt phần còn lại\n" #: fdisk/sfdisk.c:2331 #, c-format @@ -5085,11 +5188,13 @@ msgstr "%s -An thiết bị\t kích hoạt phân vùng n, bỏ kích hoạt nh #, c-format msgid "" "\n" -"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk doesn't support GPT. Use GNU Parted.\n" +"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk " +"doesn't support GPT. Use GNU Parted.\n" "\n" msgstr "" "\n" -"CẢNH BÁO : phát hiện GPT (bảng phân vùng GUID) trên « %s ». Tiện ích sfdisk không hỗ trợ GPT. Hãy dùng chương trình GNU Parted.\n" +"CẢNH BÁO : phát hiện GPT (bảng phân vùng GUID) trên « %s ». Tiện ích sfdisk " +"không hỗ trợ GPT. Hãy dùng chương trình GNU Parted.\n" "\n" #: fdisk/sfdisk.c:2453 @@ -5206,7 +5311,8 @@ msgid "" msgstr "" "\n" "Đĩa này hiện thời đang được sử dụng - phân vùng lại không phải là ý muốn\n" -"tốt. Bỏ gắn tất cả các hệ thống tập tin, và tắt (swapoff) các phân vùng trao đổi\n" +"tốt. Bỏ gắn tất cả các hệ thống tập tin, và tắt (swapoff) các phân vùng trao " +"đổi\n" "trên đĩa này. Sử dụng « --no-reread » để bỏ kiểm tra này.\n" #: fdisk/sfdisk.c:3035 @@ -5320,8 +5426,10 @@ msgid " parameters\n" msgstr " tham số\n" #: getopt/getopt.c:330 -msgid " -a, --alternative Allow long options starting with single -\n" -msgstr " -a, --alternative Cho phép tùy chọn dài bắt đầu với một - đơn\n" +msgid "" +" -a, --alternative Allow long options starting with single -\n" +msgstr "" +" -a, --alternative Cho phép tùy chọn dài bắt đầu với một - đơn\n" #: getopt/getopt.c:331 msgid " -h, --help This small usage guide\n" @@ -5332,7 +5440,8 @@ msgid " -l, --longoptions=longopts Long options to be recognized\n" msgstr " -l, --longoptions=tùychọndài Tùy chọn dài cần nhận ra\n" #: getopt/getopt.c:333 -msgid " -n, --name=progname The name under which errors are reported\n" +msgid "" +" -n, --name=progname The name under which errors are reported\n" msgstr " -n, --name=tên_chương_trình Báo cáo lỗi dưới tên này\n" #: getopt/getopt.c:334 @@ -5414,7 +5523,8 @@ msgstr "Tôi lấy thông tin quyền hạn không thành công vì đã không #: hwclock/cmos.c:584 #, c-format msgid "%s is unable to get I/O port access: the iopl(3) call failed.\n" -msgstr "Không thể dùng %s để lấy truy cập cổng V/R: gọi iopl(3) không thành công.\n" +msgstr "" +"Không thể dùng %s để lấy truy cập cổng V/R: gọi iopl(3) không thành công.\n" #: hwclock/cmos.c:587 #, c-format @@ -5437,7 +5547,8 @@ msgstr "nội bộ" #: hwclock/hwclock.c:312 #, c-format msgid "%s: Warning: unrecognized third line in adjtime file\n" -msgstr "%s: Cảnh báo: không nhận ra dòng thứ ba trong tập tin điều chỉnh thời gian\n" +msgstr "" +"%s: Cảnh báo: không nhận ra dòng thứ ba trong tập tin điều chỉnh thời gian\n" #: hwclock/hwclock.c:314 #, c-format @@ -5476,12 +5587,15 @@ msgstr "...đã nghe thấy tiếng tíc tắc\n" #: hwclock/hwclock.c:408 #, c-format msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n" -msgstr "Giá trị không đúng trong đồng hồ phần cứng: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n" +msgstr "" +"Giá trị không đúng trong đồng hồ phần cứng: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n" #: hwclock/hwclock.c:416 #, c-format msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n" -msgstr "Thời gian đồng hồ phần cứng : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld giây kể từ năm 1969\n" +msgstr "" +"Thời gian đồng hồ phần cứng : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld giây kể từ " +"năm 1969\n" #: hwclock/hwclock.c:444 #, c-format @@ -5509,8 +5623,12 @@ msgstr "" #: hwclock/hwclock.c:559 #, c-format -msgid "The Hardware Clock registers contain values that are either invalid (e.g. 50th day of month) or beyond the range we can handle (e.g. Year 2095).\n" -msgstr "Đồng hồ Phần cứng chứa các giá trị hoặc không đúng (v.d. ngày thứ 50 của tháng) hoặc vượt quá phạm vi chúng ta có thể điều khiển (v.d. Năm 2095).\n" +msgid "" +"The Hardware Clock registers contain values that are either invalid (e.g. " +"50th day of month) or beyond the range we can handle (e.g. Year 2095).\n" +msgstr "" +"Đồng hồ Phần cứng chứa các giá trị hoặc không đúng (v.d. ngày thứ 50 của " +"tháng) hoặc vượt quá phạm vi chúng ta có thể điều khiển (v.d. Năm 2095).\n" #: hwclock/hwclock.c:569 #, c-format @@ -5568,13 +5686,15 @@ msgstr "" #: hwclock/hwclock.c:650 #, c-format msgid "" -"The date command issued by %s returned something other than an integer where the converted time value was expected.\n" +"The date command issued by %s returned something other than an integer where " +"the converted time value was expected.\n" "The command was:\n" " %s\n" "The response was:\n" " %s\n" msgstr "" -"Câu lệnh date (ngày tháng) đưa ra bởi %s trả lại kết quả không phải là một số nguyên, trong khi mong đợi giá trị thời gian đã chuyển đổi.\n" +"Câu lệnh date (ngày tháng) đưa ra bởi %s trả lại kết quả không phải là một " +"số nguyên, trong khi mong đợi giá trị thời gian đã chuyển đổi.\n" "Câu lệnh là:\n" " %s\n" "Kết quả là:\n" @@ -5587,8 +5707,12 @@ msgstr "chuỗi ngày tháng %s bằng %ld giây kể từ năm 1969.\n" #: hwclock/hwclock.c:693 #, c-format -msgid "The Hardware Clock does not contain a valid time, so we cannot set the System Time from it.\n" -msgstr "Đồng hồ Phần cứng không chứa thời gian thích hợp, vì thế chúng ta không thể đặt Thời gian của Hệ thống từ đó.\n" +msgid "" +"The Hardware Clock does not contain a valid time, so we cannot set the " +"System Time from it.\n" +msgstr "" +"Đồng hồ Phần cứng không chứa thời gian thích hợp, vì thế chúng ta không thể " +"đặt Thời gian của Hệ thống từ đó.\n" #: hwclock/hwclock.c:715 #, c-format @@ -5608,7 +5732,8 @@ msgstr "\ttz.tz_minuteswest = %d\n" #: hwclock/hwclock.c:721 #, c-format msgid "Not setting system clock because running in test mode.\n" -msgstr "Không thiết lập đồng hồ hệ thống bở vì đang chạy trong chế độ thử nghiệm.\n" +msgstr "" +"Không thiết lập đồng hồ hệ thống bở vì đang chạy trong chế độ thử nghiệm.\n" #: hwclock/hwclock.c:730 #, c-format @@ -5621,7 +5746,9 @@ msgstr "settimeofday() không thành công" #: hwclock/hwclock.c:763 #, c-format -msgid "Not adjusting drift factor because the Hardware Clock previously contained garbage.\n" +msgid "" +"Not adjusting drift factor because the Hardware Clock previously contained " +"garbage.\n" msgstr "Không chỉnh độ lệnh thời gian vì Đồng hồ phần cứng chứa rác.\n" #: hwclock/hwclock.c:768 @@ -5635,16 +5762,22 @@ msgstr "" #: hwclock/hwclock.c:774 #, c-format -msgid "Not adjusting drift factor because it has been less than a day since the last calibration.\n" -msgstr "Không chỉnh độ lệnh thời gian vì nó nhỏ hơn một ngày kể từ lần định thời gian cuối cùng.\n" +msgid "" +"Not adjusting drift factor because it has been less than a day since the " +"last calibration.\n" +msgstr "" +"Không chỉnh độ lệnh thời gian vì nó nhỏ hơn một ngày kể từ lần định thời " +"gian cuối cùng.\n" #: hwclock/hwclock.c:822 #, c-format msgid "" -"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor of %f seconds/day.\n" +"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor " +"of %f seconds/day.\n" "Adjusting drift factor by %f seconds/day\n" msgstr "" -"Đồng hồ chạy sai lệch %.1f giây trong số %d giây đã qua, và đi ngược lạiđộ sai lệch %f giây/ngày.\n" +"Đồng hồ chạy sai lệch %.1f giây trong số %d giây đã qua, và đi ngược lạiđộ " +"sai lệch %f giây/ngày.\n" "Chỉnh lại độ sai lệch %f giây/ngày\n" #: hwclock/hwclock.c:872 @@ -5678,8 +5811,11 @@ msgstr "Không cập nhật các tham số chỉnh sai lệch.\n" #: hwclock/hwclock.c:969 #, c-format -msgid "The Hardware Clock does not contain a valid time, so we cannot adjust it.\n" -msgstr "Đồng hồ Phần cứng không có thời gian thích hợp, vì thế chúng ta không thể chỉnh.\n" +msgid "" +"The Hardware Clock does not contain a valid time, so we cannot adjust it.\n" +msgstr "" +"Đồng hồ Phần cứng không có thời gian thích hợp, vì thế chúng ta không thể " +"chỉnh.\n" #: hwclock/hwclock.c:1000 #, c-format @@ -5704,7 +5840,8 @@ msgstr "Không đặt được đồng hồ hệ thống.\n" #: hwclock/hwclock.c:1156 #, c-format msgid "" -"The kernel keeps an epoch value for the Hardware Clock only on an Alpha machine.\n" +"The kernel keeps an epoch value for the Hardware Clock only on an Alpha " +"machine.\n" "This copy of hwclock was built for a machine other than Alpha\n" "(and thus is presumably not running on an Alpha now). No action taken.\n" msgstr "" @@ -5724,8 +5861,12 @@ msgstr "Nhân đang giữ giá trị khởi đầu là %lu\n" #: hwclock/hwclock.c:1170 #, c-format -msgid "To set the epoch value, you must use the 'epoch' option to tell to what value to set it.\n" -msgstr "Để đặt giá trị khởi đầu, bạn cần sử dụng tùy chọn 'epoch' để thông báo giá trị muốn đặt.\n" +msgid "" +"To set the epoch value, you must use the 'epoch' option to tell to what " +"value to set it.\n" +msgstr "" +"Để đặt giá trị khởi đầu, bạn cần sử dụng tùy chọn 'epoch' để thông báo giá " +"trị muốn đặt.\n" #: hwclock/hwclock.c:1173 #, c-format @@ -5796,7 +5937,8 @@ msgstr "" "Tùy chọn: \n" " --utc đồng hồ phần cứng chỉ thời gian UTC (đối với kinh tuyến 0)\n" " --localtime đồng hồ phần cứng chỉ thời gian địa phương\n" -" --rtc=đường_dẫn tập tin đặc biệt « /dev/... » cần dùng thay cho tập tin mặc định\n" +" --rtc=đường_dẫn tập tin đặc biệt « /dev/... » cần dùng thay cho tập tin " +"mặc định\n" " --directisa truy cập trực tiếp mạch nối ISA thay vì %s\n" " --badyear lờ đi năm RTC bởi vì BIOS bị hỏng\n" " --date chỉ ra thời gian để đặt cho đồng hồ phần cứng\n" @@ -5837,18 +5979,30 @@ msgstr "" #: hwclock/hwclock.c:1454 #, c-format -msgid "%s: The --utc and --localtime options are mutually exclusive. You specified both.\n" -msgstr "%s: Các tùy chọn « --utc » và « --localtime » loại trừ lẫn nhau. Bạn lại đưa ra cả hai.\n" +msgid "" +"%s: The --utc and --localtime options are mutually exclusive. You specified " +"both.\n" +msgstr "" +"%s: Các tùy chọn « --utc » và « --localtime » loại trừ lẫn nhau. Bạn lại đưa " +"ra cả hai.\n" #: hwclock/hwclock.c:1461 #, c-format -msgid "%s: The --adjust and --noadjfile options are mutually exclusive. You specified both.\n" -msgstr "%s: Các tùy chọn « --adjust » và « --noadjust » loại trừ lẫn nhau. Bạn lại đưa ra cả hai.\n" +msgid "" +"%s: The --adjust and --noadjfile options are mutually exclusive. You " +"specified both.\n" +msgstr "" +"%s: Các tùy chọn « --adjust » và « --noadjust » loại trừ lẫn nhau. Bạn lại " +"đưa ra cả hai.\n" #: hwclock/hwclock.c:1468 #, c-format -msgid "%s: The --adjfile and --noadjfile options are mutually exclusive. You specified both.\n" -msgstr "%s: Các tùy chọn « --adjfile » và « --noadjfile » loại trừ lẫn nhau. Bạn lại đưa ra cả hai.\n" +msgid "" +"%s: The --adjfile and --noadjfile options are mutually exclusive. You " +"specified both.\n" +msgstr "" +"%s: Các tùy chọn « --adjfile » và « --noadjfile » loại trừ lẫn nhau. Bạn lại " +"đưa ra cả hai.\n" #: hwclock/hwclock.c:1477 #, c-format @@ -5863,27 +6017,38 @@ msgstr "Không có thời gian set-to nào có thể sử dụng. Không thể #: hwclock/hwclock.c:1507 #, c-format msgid "Sorry, only the superuser can change the Hardware Clock.\n" -msgstr "Rất tiếc, nhưng chỉ người dùng root mới có thể thay đổi Đồng hồ Phần cứng.\n" +msgstr "" +"Rất tiếc, nhưng chỉ người dùng root mới có thể thay đổi Đồng hồ Phần cứng.\n" #: hwclock/hwclock.c:1512 #, c-format msgid "Sorry, only the superuser can change the System Clock.\n" -msgstr "Rất tiếc, nhưng chỉ người dùng root mới có thể thay đổi Đồng hồ Hệ thống.\n" +msgstr "" +"Rất tiếc, nhưng chỉ người dùng root mới có thể thay đổi Đồng hồ Hệ thống.\n" #: hwclock/hwclock.c:1517 #, c-format -msgid "Sorry, only the superuser can change the Hardware Clock epoch in the kernel.\n" -msgstr "Rất tiếc, nhưng chỉ người dùng root mới có thể thay đổi khởi đầu củaĐồng hồ Phần cứng trong nhân.\n" +msgid "" +"Sorry, only the superuser can change the Hardware Clock epoch in the " +"kernel.\n" +msgstr "" +"Rất tiếc, nhưng chỉ người dùng root mới có thể thay đổi khởi đầu củaĐồng hồ " +"Phần cứng trong nhân.\n" #: hwclock/hwclock.c:1537 #, c-format msgid "Cannot access the Hardware Clock via any known method.\n" -msgstr "Không thể truy cập tới Đồng hồ Phần cứng qua một phương pháp không rõ.\n" +msgstr "" +"Không thể truy cập tới Đồng hồ Phần cứng qua một phương pháp không rõ.\n" #: hwclock/hwclock.c:1541 #, c-format -msgid "Use the --debug option to see the details of our search for an access method.\n" -msgstr "Sử dụng tùy chọn --debug để xem chi tiết về quá trình tìm kiếm phương pháp truy cập của chúng ta.\n" +msgid "" +"Use the --debug option to see the details of our search for an access " +"method.\n" +msgstr "" +"Sử dụng tùy chọn --debug để xem chi tiết về quá trình tìm kiếm phương pháp " +"truy cập của chúng ta.\n" #: hwclock/kd.c:55 #, c-format @@ -5963,7 +6128,9 @@ msgstr "ioctl() tới %s để tắt việc gián đoạn cập nhật không th #: hwclock/rtc.c:285 #, c-format msgid "ioctl() to %s to turn on update interrupts failed unexpectedly" -msgstr "ioctl() tới %s để bật việc gián đoạn cập nhật không thành công một cách bất thường" +msgstr "" +"ioctl() tới %s để bật việc gián đoạn cập nhật không thành công một cách bất " +"thường" #: hwclock/rtc.c:344 #, c-format @@ -5982,8 +6149,14 @@ msgstr "Mở %s không thành công" #: hwclock/rtc.c:397 hwclock/rtc.c:443 #, c-format -msgid "To manipulate the epoch value in the kernel, we must access the Linux 'rtc' device driver via the device special file %s. This file does not exist on this system.\n" -msgstr "Để điều khiển giá trị khởi đầu (epoch) trong nhân, chúng ta cần truy cập tới driver thiết bị 'rtc' qua tập tin thiết bị đặc biệt %s. Tập tin này không tồn tại trên hệ thống.\n" +msgid "" +"To manipulate the epoch value in the kernel, we must access the Linux 'rtc' " +"device driver via the device special file %s. This file does not exist on " +"this system.\n" +msgstr "" +"Để điều khiển giá trị khởi đầu (epoch) trong nhân, chúng ta cần truy cập tới " +"driver thiết bị 'rtc' qua tập tin thiết bị đặc biệt %s. Tập tin này không " +"tồn tại trên hệ thống.\n" #: hwclock/rtc.c:402 hwclock/rtc.c:448 #, c-format @@ -6003,17 +6176,21 @@ msgstr "chúng ta đọc khởi đầu (epoch) %ld từ %s bằng RTC_EPOCH_READ #: hwclock/rtc.c:435 #, c-format msgid "The epoch value may not be less than 1900. You requested %ld\n" -msgstr "Giá trị khởi đầu (epoch) không được nhỏ hơn 1900. Bạn đã yêu cầu %ld\n" +msgstr "" +"Giá trị khởi đầu (epoch) không được nhỏ hơn 1900. Bạn đã yêu cầu %ld\n" #: hwclock/rtc.c:453 #, c-format msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n" -msgstr "thiết lập khởi đầu (epoch) thành %ld bằng RTC_EPOCH_SET ioctl tới %s.\n" +msgstr "" +"thiết lập khởi đầu (epoch) thành %ld bằng RTC_EPOCH_SET ioctl tới %s.\n" #: hwclock/rtc.c:458 #, c-format -msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n" -msgstr "Trình điều khiển thiết bị của nhân cho %s không có RTC_EPOCH_SET ioctl.\n" +msgid "" +"The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n" +msgstr "" +"Trình điều khiển thiết bị của nhân cho %s không có RTC_EPOCH_SET ioctl.\n" #: hwclock/rtc.c:461 #, c-format @@ -6091,13 +6268,17 @@ msgstr "%s: thừa dữ liệu vào" #: login-utils/agetty.c:1203 #, c-format msgid "" -"Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n" -"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n" +"Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H " +"login_host] baud_rate,... line [termtype]\n" +"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] " +"line baud_rate,... [termtype]\n" msgstr "" "Sử dụng:\n" -"%s [-8hiLmUw] [-l trình_đăng_nhập] [-t thời_hạn] [-I chuỗi_sơ_khởi] [-H máy_đăng_nhập] tốc_độ_bốt,... dòng [kiểu_thiết_bị_cuối]\n" +"%s [-8hiLmUw] [-l trình_đăng_nhập] [-t thời_hạn] [-I chuỗi_sơ_khởi] [-H " +"máy_đăng_nhập] tốc_độ_bốt,... dòng [kiểu_thiết_bị_cuối]\n" "hoặc\n" -"[-hiLmw] [-l trình_đăng_nhập] [-t thời_hạn] [-I chuỗi_sơ_khởi] [-H máy_đăng_nhập] dòng tốc_độ_bốt,... [kiểu_thiết_bị_cuối]\n" +"[-hiLmw] [-l trình_đăng_nhập] [-t thời_hạn] [-I chuỗi_sơ_khởi] [-H " +"máy_đăng_nhập] dòng tốc_độ_bốt,... [kiểu_thiết_bị_cuối]\n" #: login-utils/checktty.c:91 login-utils/checktty.c:112 #, c-format @@ -6240,13 +6421,19 @@ msgstr "%s: %s chưa được xác thực để thay đổi trình bao của %s\ #: login-utils/chsh.c:164 #, c-format -msgid "%s: Running UID doesn't match UID of user we're altering, shell change denied\n" -msgstr "%s: UID đang hoạt động không tương ứng với UID của người dùng chúng ta đang nhập, không được phép thay đổi trình bao\n" +msgid "" +"%s: Running UID doesn't match UID of user we're altering, shell change " +"denied\n" +msgstr "" +"%s: UID đang hoạt động không tương ứng với UID của người dùng chúng ta đang " +"nhập, không được phép thay đổi trình bao\n" #: login-utils/chsh.c:170 #, c-format msgid "%s: Your shell is not in /etc/shells, shell change denied\n" -msgstr "%s: Trình bao của bạn không có trong /etc/shells, không cho phép thay đổi trình bao\n" +msgstr "" +"%s: Trình bao của bạn không có trong /etc/shells, không cho phép thay đổi " +"trình bao\n" #: login-utils/chsh.c:177 #, c-format @@ -6338,7 +6525,8 @@ msgstr "Không mở được %s để đọc nên thoát." #: login-utils/last.c:148 msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n" -msgstr "sử dụng: last [-#] [-f tập_tin] [-t tty] [-h tên_máy] [người_dùng ...]\n" +msgstr "" +"sử dụng: last [-#] [-f tập_tin] [-t tty] [-h tên_máy] [người_dùng ...]\n" #: login-utils/last.c:284 msgid " still logged in" @@ -7088,8 +7276,11 @@ msgstr "logger: không rõ tên quyền ưu tiên: %s.\n" #: misc-utils/logger.c:285 #, c-format -msgid "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n" -msgstr "Sử dụng: logger [-is] [-f tập_tin] [-p ưu_tiên] [-t thẻ] [-u ổ_cắm] [ thông_báo ... ]\n" +msgid "" +"usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n" +msgstr "" +"Sử dụng: logger [-is] [-f tập_tin] [-p ưu_tiên] [-t thẻ] [-u ổ_cắm] " +"[ thông_báo ... ]\n" #: misc-utils/look.c:351 #, c-format @@ -7328,7 +7519,8 @@ msgstr " [ -repeat [on|off] ]\t\tlặp lại [bật|tắt]\n" #: misc-utils/setterm.c:775 #, c-format msgid " [ -appcursorkeys [on|off] ]\n" -msgstr " [ -appcursorkeys [on|off] ]\t\tcác phím con trỏ của ứng dụng [bật|tắt]\n" +msgstr "" +" [ -appcursorkeys [on|off] ]\t\tcác phím con trỏ của ứng dụng [bật|tắt]\n" #: misc-utils/setterm.c:776 #, c-format @@ -7622,7 +7814,9 @@ msgstr "mount: chuẩn bị gắn %s theo %s\n" #: mount/fsprobe.c:196 #, c-format msgid "mount: no LABEL=, no UUID=, going to mount %s by path\n" -msgstr "mount: không có « LABEL= » (nhãn), cũng không có « UUID= » nên sắp gắn %s theo đường dẫn\n" +msgstr "" +"mount: không có « LABEL= » (nhãn), cũng không có « UUID= » nên sắp gắn %s theo " +"đường dẫn\n" #: mount/fstab.c:144 #, c-format @@ -7760,7 +7954,8 @@ msgid "" " about the loop device? (If so, recompile or `modprobe loop'.)" msgstr "" "%s: Không tìm thấy bất kỳ thiết bị vòng lặp nào. Có thể nhân này không biết\n" -" về thiết bị vòng lặp? (Nếu vậy, hãy biên dịch lại hoặc thử `modprobe loop'.)" +" về thiết bị vòng lặp? (Nếu vậy, hãy biên dịch lại hoặc thử `modprobe " +"loop'.)" #: mount/lomount.c:611 msgid "Out of memory while reading passphrase" @@ -7804,7 +7999,9 @@ msgstr "del_loop(%s): thành công\n" #: mount/lomount.c:830 #, c-format msgid "This mount was compiled without loop support. Please recompile.\n" -msgstr "Phiên bản mount này được biên dịch không hỗ trợ vòng lặp. Xin hãy biên dịch lại.\n" +msgstr "" +"Phiên bản mount này được biên dịch không hỗ trợ vòng lặp. Xin hãy biên dịch " +"lại.\n" #: mount/lomount.c:865 #, c-format @@ -7815,7 +8012,8 @@ msgid "" " %1$s -a | --all list all used\n" " %1$s -d | --detach delete\n" " %1$s -f | --find find unused\n" -" %1$s -j | --associated [-o ] list all associated with \n" +" %1$s -j | --associated [-o ] list all associated with " +"\n" " %1$s [ options ] {-f|--find|loopdev} setup\n" msgstr "" "\n" @@ -7848,7 +8046,8 @@ msgstr "" " -e | --encryption \tbật mã hoá dữ liệu với đã ghi rõ\n" " -h | --help \t\ttrợ giúp này\n" " -o | --offset \t\tbắt đầu ở khoảng bù số này trong tập tin\n" -" --sizelimit \tvòng lặp bị hạn chế thành chỉ byte của tập tin\n" +" --sizelimit \tvòng lặp bị hạn chế thành chỉ byte của tập " +"tin\n" " -p | --pass-fd \t\tđọc cụm từ mật khẩu từ bộ mô tả tập tin \n" " -r | --read-only \t\tthiết lập thiết bị vòng lặp chỉ đọc\n" " --show \t\tin ra tên thiết bị (với « -f »)\n" @@ -8032,8 +8231,11 @@ msgid "mount: according to mtab, %s is already mounted on %s\n" msgstr "mount: theo như mtab thì %s đã gắn vào %s\n" #: mount/mount.c:1195 -msgid "mount: I could not determine the filesystem type, and none was specified" -msgstr "mount: không thể nhận ra kiểu hệ thống tập tin, và người dùng không chỉ ra kiểu nào" +msgid "" +"mount: I could not determine the filesystem type, and none was specified" +msgstr "" +"mount: không thể nhận ra kiểu hệ thống tập tin, và người dùng không chỉ ra " +"kiểu nào" #: mount/mount.c:1198 msgid "mount: you must specify the filesystem type" @@ -8175,12 +8377,15 @@ msgstr "mount: có thể muốn đặt 'vfat'?" #: mount/mount.c:1330 #, c-format msgid "mount: %s has wrong device number or fs type %s not supported" -msgstr "mount: %s có số hiệu thiết bị sai hoặc chưa hỗ trợ kiểu hệ thống tập tin %s" +msgstr "" +"mount: %s có số hiệu thiết bị sai hoặc chưa hỗ trợ kiểu hệ thống tập tin %s" #: mount/mount.c:1338 #, c-format msgid "mount: %s is not a block device, and stat fails?" -msgstr "mount: %s không phải là một thiết bị khối, và stat (lấy trạng thái) không thành công?" +msgstr "" +"mount: %s không phải là một thiết bị khối, và stat (lấy trạng thái) không " +"thành công?" #: mount/mount.c:1340 #, c-format @@ -8254,12 +8459,16 @@ msgstr "" #: mount/mount.c:1488 #, c-format msgid "mount: no type was given - I'll assume nfs because of the colon\n" -msgstr "mount: không đưa ra kiểu hệ thống tập tin nên coi như nfs vì có dấu hai chấm\n" +msgstr "" +"mount: không đưa ra kiểu hệ thống tập tin nên coi như nfs vì có dấu hai " +"chấm\n" #: mount/mount.c:1494 #, c-format msgid "mount: no type was given - I'll assume cifs because of the // prefix\n" -msgstr "mount: không đưa ra kiểu hệ thống tập tin nên giả sử smbfs vì có // đằng trước\n" +msgstr "" +"mount: không đưa ra kiểu hệ thống tập tin nên giả sử smbfs vì có // đằng " +"trước\n" #: mount/mount.c:1589 #, c-format @@ -8416,7 +8625,8 @@ msgstr "" "Sử dụng:\n" " %1$s -a [-e] [-v] \t\tbật mọi trao đổi từ « /etc/fstab »\n" " %1$s [-p ưu_tiên] [-v] <đặc_biệt> \tbật trao đổi đã cho\n" -" %1$s -s \t\t\thiển thị bản tóm tắt %1$s -h \t\t\thiển thị trợ giúp\n" +" %1$s -s \t\t\thiển thị bản tóm tắt %1$s -" +"h \t\t\thiển thị trợ giúp\n" " %1$s -V \t\t\thiển thị phiên bản\n" "\n" @@ -8666,10 +8876,12 @@ msgstr "" #: sys-utils/cytune.c:125 #, c-format msgid "" -"File %s, For threshold value %lu and timrout value %lu, Maximum characters in fifo were %d,\n" +"File %s, For threshold value %lu and timrout value %lu, Maximum characters " +"in fifo were %d,\n" "and the maximum transfer rate in characters/second was %f\n" msgstr "" -"Tập tin %s, Giá trị ngưỡng %lu, và giá trị thời gian chờ %lu, Số ký tự lớn nhất trong fifo là %d,\n" +"Tập tin %s, Giá trị ngưỡng %lu, và giá trị thời gian chờ %lu, Số ký tự lớn " +"nhất trong fifo là %d,\n" "và tốc độ truyền tải lớn nhất tính theo ký tự/giây là %f\n" #: sys-utils/cytune.c:189 @@ -8699,8 +8911,12 @@ msgstr "Giá trị thời gian mặc định không đúng: %s\n" #: sys-utils/cytune.c:238 #, c-format -msgid "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [file...]\n" -msgstr "Sử dụng: %s [-q [-i khoảngthờigian]] ([-s giátrị]|[-S giátrị]) ([-t giátrị]|[-T giátrị]) [-g|-G] tậptin [tậptin...]\n" +msgid "" +"Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) " +"[-g|-G] file [file...]\n" +msgstr "" +"Sử dụng: %s [-q [-i khoảngthờigian]] ([-s giátrị]|[-S giátrị]) ([-t giátrị]|" +"[-T giátrị]) [-g|-G] tậptin [tậptin...]\n" #: sys-utils/cytune.c:250 sys-utils/cytune.c:269 sys-utils/cytune.c:289 #: sys-utils/cytune.c:339 @@ -8753,8 +8969,11 @@ msgstr "Không CYGETMON được trên %s: %s\n" #: sys-utils/cytune.c:418 #, c-format -msgid "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" -msgstr "%s: %lu ngắt, %lu/%lu ký tự; fifo: %lu ngưỡng, %lu thời hạn, %lu tối đa, %lu bây giờ\n" +msgid "" +"%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" +msgstr "" +"%s: %lu ngắt, %lu/%lu ký tự; fifo: %lu ngưỡng, %lu thời hạn, %lu tối đa, %lu " +"bây giờ\n" #: sys-utils/cytune.c:424 #, c-format @@ -8763,8 +8982,11 @@ msgstr " %f int/giây; %f rec, %f gửi (kýtự/giây)\n" #: sys-utils/cytune.c:429 #, c-format -msgid "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" -msgstr "%s: %lu ngắt, %lu ký tự; fifo: %lu ngưỡng, %lu thời hạn, %lu tối đa, %lu bây giờ\n" +msgid "" +"%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n" +msgstr "" +"%s: %lu ngắt, %lu ký tự; fifo: %lu ngưỡng, %lu thời hạn, %lu tối đa, %lu bây " +"giờ\n" #: sys-utils/cytune.c:435 #, c-format @@ -8879,8 +9101,11 @@ msgstr "\t%s -h để xem trợ giúp.\n" #: sys-utils/ipcs.c:130 #, c-format -msgid "%s provides information on ipc facilities for which you have read access.\n" -msgstr "%s cung cấp thông tin về phương tiện ipc cho những gì người dùng có truy cập đọc.\n" +msgid "" +"%s provides information on ipc facilities for which you have read access.\n" +msgstr "" +"%s cung cấp thông tin về phương tiện ipc cho những gì người dùng có truy cập " +"đọc.\n" #: sys-utils/ipcs.c:132 #, c-format @@ -9463,8 +9688,11 @@ msgid "usage: rdev [ -rv ] [ -o OFFSET ] [ IMAGE [ VALUE [ OFFSET ] ] ]" msgstr "sử dụng: rdev [ -rv ] [ -o BÙ ] [ ẢNH [ GIÁ_TRỊ [ BÙ ] ] ]" #: sys-utils/rdev.c:70 -msgid " rdev /dev/fd0 (or rdev /linux, etc.) displays the current ROOT device" -msgstr " rdev /dev/fd0 (hoặc rdev /linux, v.v...) hiển thị thiết bị ROOT (gốc) hiện thời" +msgid "" +" rdev /dev/fd0 (or rdev /linux, etc.) displays the current ROOT device" +msgstr "" +" rdev /dev/fd0 (hoặc rdev /linux, v.v...) hiển thị thiết bị ROOT (gốc) " +"hiện thời" #: sys-utils/rdev.c:71 msgid " rdev /dev/fd0 /dev/hda2 sets ROOT to /dev/hda2" @@ -9472,7 +9700,9 @@ msgstr " rdev /dev/fd0 /dev/hda2 đặt ROOT (gốc) thành /dev/hda2" #: sys-utils/rdev.c:72 msgid " rdev -R /dev/fd0 1 set the ROOTFLAGS (readonly status)" -msgstr " rdev -R /dev/fd0 1 đặt ROOTFLAGS [các cờ gốc] (trạng thái chỉ đọc)" +msgstr "" +" rdev -R /dev/fd0 1 đặt ROOTFLAGS [các cờ gốc] (trạng thái chỉ " +"đọc)" #: sys-utils/rdev.c:73 msgid " rdev -r /dev/fd0 627 set the RAMDISK size" @@ -9480,7 +9710,9 @@ msgstr " rdev -r /dev/fd0 627 đặt kích cỡ RAMDISK (đĩa RAM)" #: sys-utils/rdev.c:74 msgid " rdev -v /dev/fd0 1 set the bootup VIDEOMODE" -msgstr " rdev -v /dev/fd0 1 đặt chế độ VIDEOMODE (chế độ ảnh động) khởi động" +msgstr "" +" rdev -v /dev/fd0 1 đặt chế độ VIDEOMODE (chế độ ảnh động) " +"khởi động" #: sys-utils/rdev.c:75 msgid " rdev -o N ... use the byte offset N" @@ -9499,8 +9731,11 @@ msgid " vidmode ... same as rdev -v" msgstr " vidmode ... giống như rdev -v" #: sys-utils/rdev.c:79 -msgid "Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..." -msgstr "Chú ý: chế độ ảnh động là: -3=Hỏi, -2=Mở rộng, -1=VGA chuẩn, 1=phím1, 2=phím2,..." +msgid "" +"Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..." +msgstr "" +"Chú ý: chế độ ảnh động là: -3=Hỏi, -2=Mở rộng, -1=VGA chuẩn, 1=phím1, " +"2=phím2,..." #: sys-utils/rdev.c:80 msgid " use -R 1 to mount root readonly, -R 0 for read/write." @@ -9554,7 +9789,8 @@ msgstr "readprofile: lỗi ghi %s: %s\n" #: sys-utils/readprofile.c:268 #, c-format msgid "Assuming reversed byte order. Use -n to force native byte order.\n" -msgstr "Giả sử thứ tự byte đảo lộn. Dùng « -n » để ép buộc theo thứ tự byte sở hữu.\n" +msgstr "" +"Giả sử thứ tự byte đảo lộn. Dùng « -n » để ép buộc theo thứ tự byte sở hữu.\n" #: sys-utils/readprofile.c:284 #, c-format @@ -9769,7 +10005,8 @@ msgstr "" msgid "" " -h, --help displays this help text\n" " -v, --verbose says what options are being switched on\n" -" -R, --addr-no-randomize disables randomization of the virtual address space\n" +" -R, --addr-no-randomize disables randomization of the virtual address " +"space\n" " -F, --fdpic-funcptrs makes function pointers point to descriptors\n" " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n" " -L, --addr-compat-layout changes the way virtual memory is allocated\n" @@ -9778,7 +10015,8 @@ msgid "" " -I, --short-inode turns on SHORT_INODE\n" " -S, --whole-seconds turns on WHOLE_SECONDS\n" " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n" -" -3, --3gb limits the used address space to a maximum of 3 GB\n" +" -3, --3gb limits the used address space to a maximum of 3 " +"GB\n" " --4gb ignored (for backward compatibility only)\n" msgstr "" " -h, --help \t\thiển thị trợ giúp này\n" @@ -9789,7 +10027,8 @@ msgstr "" " -Z, --mmap-page-zero\tbật MMAP_PAGE_ZERO\n" " -L, --addr-compat-layout\tthay đổi cách cấp phát bộ nhớ ảo\n" " -X, --read-implies-exec \tbật READ_IMPLIES_EXEC (đọc ngụ ý thực hiện)\n" -" -B, --32bit \t\tbật ADDR_LIMIT_32BIT (giới hạn địa chỉ 32-bit)\n" +" -B, --32bit \t\tbật ADDR_LIMIT_32BIT (giới hạn địa chỉ 32-" +"bit)\n" " -I, --short-inode \t\tbật SHORT_INODE (nút thông tin ngắn)\n" " -S, --whole-seconds \tbật WHOLE_SECONDS (nguyên giây)\n" " -T, --sticky-timeouts \tbật STICKY_TIMEOUTS (thời hạn dính)\n" @@ -9956,8 +10195,11 @@ msgstr "hexdump: giá trị nhảy qua (skip) xấu.\n" #: text-utils/hexsyntax.c:131 #, c-format -msgid "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n" -msgstr "hexdump: [-bcCdovx] [-e fmt] [-f tậptin_fmt] [-n chiềudài] [-s nhảyqua] [tậptin ...]\n" +msgid "" +"hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n" +msgstr "" +"hexdump: [-bcCdovx] [-e fmt] [-f tậptin_fmt] [-n chiềudài] [-s nhảyqua] " +"[tậptin ...]\n" #: text-utils/more.c:256 #, c-format @@ -10042,11 +10284,13 @@ msgstr "" #: text-utils/more.c:1294 msgid "" "\n" -"Most commands optionally preceded by integer argument k. Defaults in brackets.\n" +"Most commands optionally preceded by integer argument k. Defaults in " +"brackets.\n" "Star (*) indicates argument becomes new default.\n" msgstr "" "\n" -"Có thể thêm một tham số số nguyên vào trước hầu hết các câu lệnh. Mặc định đặttrong dấu ngoặc đơn.\n" +"Có thể thêm một tham số số nguyên vào trước hầu hết các câu lệnh. Mặc định " +"đặttrong dấu ngoặc đơn.\n" "Dấu sao (*) cho biết tham số sẽ thành mặc định mới.\n" #: text-utils/more.c:1301 @@ -10071,10 +10315,13 @@ msgid "" ":f Display current file name and line number\n" ". Repeat previous command\n" msgstr "" -" Hiện k dòng văn bản tiếp theo [kích cỡ màn hình hiện thời]\n" -"z Hiển thị k dòng văn bản tiếp theo [kích cỡ màn hình hiện thời]*\n" +" Hiện k dòng văn bản tiếp theo [kích cỡ màn hình hiện " +"thời]\n" +"z Hiển thị k dòng văn bản tiếp theo [kích cỡ màn hình " +"hiện thời]*\n" " Hiển thị k dòng văn bản tiếp theo [1]*\n" -"d hoặc ctrl-D Cuộn k dòng [kích cỡ cuộn hiện thời, ban đầu là 11]*\n" +"d hoặc ctrl-D Cuộn k dòng [kích cỡ cuộn hiện thời, ban đầu là 11]" +"*\n" "q hoặc Q hoặc Thoát khỏi more\n" "s Bỏ qua k dòng văn bản [1]\n" "f Bỏ qua k màn hình văn bản [1]\n" @@ -10082,7 +10329,8 @@ msgstr "" "' Đi tới nơi trước khi bắt đầu tìm kiếm\n" "= Hiển thị số thứ tự dòng hiện thời\n" "/ Tìm kiếm lần xuất hiện thứ k của biểu thức [1]\n" -"n Tìm kiếm lần xuất hiện thứ k của biểu thức cuối cùng [1]\n" +"n Tìm kiếm lần xuất hiện thứ k của biểu thức cuối cùng " +"[1]\n" "! hoặc :! Thực hiện trong một shell con\n" "v Chạy /usr/bin/vi tại dòng hiện thời\n" "ctrl-L Vẽ lại màn hình\n" @@ -10209,8 +10457,11 @@ msgstr "hexdump: ký tự chuyển đổi xấu %%%s.\n" #: text-utils/pg.c:235 #, c-format -msgid "%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n" -msgstr "%s: Sử dụng: %s [-số] [-p chuỗi] [-cefnrs] [+dòng] [+/pattern/] [các_tậptin]\n" +msgid "" +"%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n" +msgstr "" +"%s: Sử dụng: %s [-số] [-p chuỗi] [-cefnrs] [+dòng] [+/pattern/] " +"[các_tậptin]\n" #: text-utils/pg.c:244 #, c-format -- 2.39.5