From f37a7238d379bc2befbcb08a03de03f4f446131c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Oct 2007 18:26:22 +0200 Subject: [PATCH] [SCSI] 53c7xx: fix removal fallout This patch does some additional cleanups after the 53c7xx removal. Signed-off-by: Adrian Bunk Acked-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- Documentation/dontdiff | 2 - Documentation/m68k/kernel-options.txt | 60 --------------------------- Documentation/scsi/00-INDEX | 2 - Documentation/scsi/ncr53c7xx.txt | 40 ------------------ drivers/scsi/.gitignore | 2 - 5 files changed, 106 deletions(-) delete mode 100644 Documentation/scsi/ncr53c7xx.txt diff --git a/Documentation/dontdiff b/Documentation/dontdiff index f2d658a6a9..c09a96b993 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -46,8 +46,6 @@ .mailmap .mm 53c700_d.h -53c7xx_d.h -53c7xx_u.h 53c8xx_d.h* BitKeeper COPYING diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt index 248589e8bc..c93bed66e2 100644 --- a/Documentation/m68k/kernel-options.txt +++ b/Documentation/m68k/kernel-options.txt @@ -867,66 +867,6 @@ controller and should be autodetected by the driver. An example is the 24 bit region which is specified by a mask of 0x00fffffe. -5.5) 53c7xx= ------------- - -Syntax: 53c7xx= - -These options affect the A4000T, A4091, WarpEngine, Blizzard 603e+, -and GForce 040/060 SCSI controllers on the Amiga, as well as the -builtin MVME 16x SCSI controller. - -The is a comma-separated list of the sub-options listed -below. - -5.5.1) nosync -------------- - -Syntax: nosync:0 - - Disables sync negotiation for all devices. Any value after the - colon is acceptable (and has the same effect). - -5.5.2) noasync --------------- - -[OBSOLETE, REMOVED] - -5.5.3) nodisconnect -------------------- - -Syntax: nodisconnect:0 - - Disables SCSI disconnects. Any value after the colon is acceptable - (and has the same effect). - -5.5.4) validids ---------------- - -Syntax: validids:0xNN - - Specify which SCSI ids the driver should pay attention to. This is - a bitmask (i.e. to only pay attention to ID#4, you'd use 0x10). - Default is 0x7f (devices 0-6). - -5.5.5) opthi -5.5.6) optlo ------------- - -Syntax: opthi:M,optlo:N - - Specify options for "hostdata->options". The acceptable definitions - are listed in drivers/scsi/53c7xx.h; the 32 high bits should be in - opthi and the 32 low bits in optlo. They must be specified in the - order opthi=M,optlo=N. - -5.5.7) next ------------ - - No argument. Used to separate blocks of keywords when there's more - than one 53c7xx host adapter in the system. - - /* Local Variables: */ /* mode: text */ /* End: */ diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index aa1f7e9278..c2e18e1098 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -64,8 +64,6 @@ lpfc.txt - LPFC driver release notes megaraid.txt - Common Management Module, shared code handling ioctls for LSI drivers -ncr53c7xx.txt - - info on driver for NCR53c7xx based adapters ncr53c8xx.txt - info on driver for NCR53c8xx based adapters osst.txt diff --git a/Documentation/scsi/ncr53c7xx.txt b/Documentation/scsi/ncr53c7xx.txt deleted file mode 100644 index 91e9552d63..0000000000 --- a/Documentation/scsi/ncr53c7xx.txt +++ /dev/null @@ -1,40 +0,0 @@ -README for WarpEngine/A4000T/A4091 SCSI kernels. - -Use the following options to disable options in the SCSI driver. - -Using amiboot for example..... - -To disable Synchronous Negotiation.... - - amiboot -k kernel 53c7xx=nosync:0 - -To disable Disconnection.... - - amiboot -k kernel 53c7xx=nodisconnect:0 - -To disable certain SCSI devices... - - amiboot -k kernel 53c7xx=validids:0x3F - - this allows only device ID's 0,1,2,3,4 and 5 for linux to handle. - (this is a bitmasked field - i.e. each bit represents a SCSI ID) - -These commands work on a per controller basis and use the option 'next' to -move to the next controller in the system. - -e.g. - amiboot -k kernel 53c7xx=nodisconnect:0,next,nosync:0 - - this uses No Disconnection on the first controller and Asynchronous - SCSI on the second controller. - -Known Issues: - -Two devices are known not to function with the default settings of using -synchronous SCSI. These are the Archive Viper 150 Tape Drive and the -SyQuest SQ555 removeable hard drive. When using these devices on a controller -use the 'nosync:0' option. - -Please try these options and post any problems/successes to me. - -Alan Hourihane diff --git a/drivers/scsi/.gitignore b/drivers/scsi/.gitignore index b385af3143..c89ae9a043 100644 --- a/drivers/scsi/.gitignore +++ b/drivers/scsi/.gitignore @@ -1,3 +1 @@ 53c700_d.h -53c7xx_d.h -53c7xx_u.h -- 2.39.5