From f2c853bca542f5ac0b036377637192a74f2091c2 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Wed, 7 Sep 2005 22:44:48 +0200 Subject: [PATCH] [PATCH] sata_sis: Add support for SiS182 chipset This patch adds support for the SiS182 sata chipset. This is a minimalistic version of the patch from http://bugme.osdl.org/show_bug.cgi?id=4192. Basically, it add the PCI IDs and handles the change of the 2nd port adress register. Signed-Off-By: Arnaud Patard Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sis.c | 82 +++++++++++++++++++++++++++++++++++------ 1 file changed, 71 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 43af445b3a..7d1aaa99aa 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -52,7 +52,10 @@ enum { /* PCI configuration registers */ SIS_GENCTL = 0x54, /* IDE General Control register */ SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */ - SIS_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ + SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ + SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */ + SIS_PMR = 0x90, /* port mapping register */ + SIS_PMR_COMBINED = 0x30, /* random bits */ SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */ @@ -67,6 +70,7 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static struct pci_device_id sis_pci_tbl[] = { { PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, { PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, + { PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, { } /* terminate list */ }; @@ -139,56 +143,94 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sis_pci_tbl); MODULE_VERSION(DRV_VERSION); -static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg) +static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device) { unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); - if (port_no) - addr += SIS_SATA1_OFS; + if (port_no) + if (device == 0x182) + addr += SIS182_SATA1_OFS; + else + addr += SIS180_SATA1_OFS; return addr; } static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg); - u32 val; + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); + u32 val, val2; + u8 pmr; if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */ return 0xffffffff; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + pci_read_config_dword(pdev, cfg_addr, &val); - return val; + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_read_config_dword(pdev, cfg_addr+0x10, &val2); + + return val|val2; } static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr); + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); + u8 pmr; if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */ return; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + pci_write_config_dword(pdev, cfg_addr, val); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_write_config_dword(pdev, cfg_addr+0x10, val); } static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) { + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u32 val,val2; + u8 pmr; + if (sc_reg > SCR_CONTROL) return 0xffffffffU; if (ap->flags & SIS_FLAG_CFGSCR) return sis_scr_cfg_read(ap, sc_reg); - return inl(ap->ioaddr.scr_addr + (sc_reg * 4)); + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + val = inl(ap->ioaddr.scr_addr + (sc_reg * 4)); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); + + return val|val2; } static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u8 pmr; + if (sc_reg > SCR_CONTROL) return; + pci_read_config_byte(pdev, SIS_PMR, &pmr); + if (ap->flags & SIS_FLAG_CFGSCR) sis_scr_cfg_write(ap, sc_reg, val); - else + else { outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); + } } /* move to PCI layer, integrate w/ MSI stuff */ @@ -210,6 +252,8 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u32 genctl; struct ata_port_info *ppi; int pci_dev_busy = 0; + u8 pmr; + u8 port2_start; rc = pci_enable_device(pdev); if (rc) @@ -251,11 +295,27 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->host_flags |= SIS_FLAG_CFGSCR; } + pci_read_config_byte(pdev, SIS_PMR, &pmr); + if (ent->device != 0x182) { + if ((pmr & SIS_PMR_COMBINED) == 0) { + printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n"); + port2_start=0x64; + } + else { + printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n"); + port2_start=0; + } + } + else { + printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n"); + port2_start = 0x20; + } + if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) { probe_ent->port[0].scr_addr = pci_resource_start(pdev, SIS_SCR_PCI_BAR); probe_ent->port[1].scr_addr = - pci_resource_start(pdev, SIS_SCR_PCI_BAR) + 64; + pci_resource_start(pdev, SIS_SCR_PCI_BAR) + port2_start; } pci_set_master(pdev); -- 2.39.5