From edeb614c1c8388b354d93ff7790317cc5d6a38ec Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 21 Sep 2007 16:29:05 +0900 Subject: [PATCH] pata_sis: add missing UDMA5 timing value in sis_66_set_dmamode() sis_66_set_dmamode() also handles early UDMA100 (SIS630 ET) but is missing udma timing value for UDMA100. According to sis5513, this should be 0x8000. This caused UDMA100 device to fail on pata_sis till it downgrades to UDMA66 while it works fine on sis5513 at UDMA100. Reported by Adam Blech. Signed-off-by: Tejun Heo Cc: Adam Blech Signed-off-by: Jeff Garzik --- drivers/ata/pata_sis.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 2bd7645f1a..cce2834b2b 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -375,8 +375,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) int drive_pci = sis_old_port_base(adev); u16 timing; + /* MWDMA 0-2 and UDMA 0-5 */ const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; - const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; + const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; pci_read_config_word(pdev, drive_pci, &timing); -- 2.39.5