From ead2bfeb7f739d2ad6e09dc1343f0da51feb7f51 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 15 Jun 2006 04:41:52 -0400 Subject: [PATCH] [PATCH] PCI: fix issues with extended conf space when MMCONFIG disabled because of e820 On 15 Jun 2006 03:45:10 +0200, Andi Kleen wrote: > Anyways I would say that if the BIOS can't get MCFG right then > it's likely not been validated on that board and shouldn't be used. According to Petr Vandrovec: ... "What is important (and checked) is address of MMCONFIG reported by MCFG table... Unfortunately code does not bother with printing that address :-( "Another problem is that code has hardcoded that MMCONFIG area is 256MB large. Unfortunately for the code PCI specification allows any power of two between 2MB and 256MB if vendor knows that such amount of busses (from 2 to 128) will be sufficient for system. With notebook it is quite possible that not full 8 bits are implemented for MMCONFIG bus number." So here is a patch. Unfortunately my system still fails the test because it doesn't reserve any part of the MMCONFIG area, but this may fix others. Booted on x86_64, only compiled on i386. x86_64 still remaps the max area (256MB) even though only 2MB is checked... but 2.6.16 had no check at all so it is still better. PCI: reduce size of x86 MMCONFIG reserved area check 1. Print the address of the MMCONFIG area when the test for that area being reserved fails. 2. Only check if the first 2MB is reserved, as that is the minimum. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Arjan van de Ven Signed-off-by: Greg Kroah-Hartman --- arch/i386/pci/mmconfig.c | 9 ++++++--- arch/x86_64/pci/mmconfig.c | 13 +++++++++---- 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 6b1ea0c9a5..e545b0992c 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -15,7 +15,9 @@ #include #include "pci.h" -#define MMCONFIG_APER_SIZE (256*1024*1024) +/* aperture is up to 256MB but BIOS may reserve less */ +#define MMCONFIG_APER_MIN (2 * 1024*1024) +#define MMCONFIG_APER_MAX (256 * 1024*1024) /* Assume systems with more busses have correct MCFG */ #define MAX_CHECK_BUS 16 @@ -197,9 +199,10 @@ void __init pci_mmcfg_init(void) return; if (!e820_all_mapped(pci_mmcfg_config[0].base_address, - pci_mmcfg_config[0].base_address + MMCONFIG_APER_SIZE, + pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN, E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area is not E820-reserved\n"); + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n", + pci_mmcfg_config[0].base_address); printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); return; } diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index a2060e4d5d..3c55c76c6f 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -13,7 +13,10 @@ #include "pci.h" -#define MMCONFIG_APER_SIZE (256*1024*1024) +/* aperture is up to 256MB but BIOS may reserve less */ +#define MMCONFIG_APER_MIN (2 * 1024*1024) +#define MMCONFIG_APER_MAX (256 * 1024*1024) + /* Verify the first 16 busses. We assume that systems with more busses get MCFG right. */ #define MAX_CHECK_BUS 16 @@ -175,9 +178,10 @@ void __init pci_mmcfg_init(void) return; if (!e820_all_mapped(pci_mmcfg_config[0].base_address, - pci_mmcfg_config[0].base_address + MMCONFIG_APER_SIZE, + pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN, E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area is not E820-reserved\n"); + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n", + pci_mmcfg_config[0].base_address); printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); return; } @@ -190,7 +194,8 @@ void __init pci_mmcfg_init(void) } for (i = 0; i < pci_mmcfg_config_num; ++i) { pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; - pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_SIZE); + pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, + MMCONFIG_APER_MAX); if (!pci_mmcfg_virt[i].virt) { printk("PCI: Cannot map mmconfig aperture for segment %d\n", pci_mmcfg_config[i].pci_segment_group_number); -- 2.39.5