From e9a1c52c7b19d10342226c12f170d7ab644427e2 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 15 May 2006 22:06:37 +0200 Subject: [PATCH] [PATCH] sbp2: add read_capacity workaround for iPod Apple decided to copy some USB stupidity over to FireWire. The sector number returned by iPods from read_capacity is one too many. This may cause I/O errors, especially if the kernel is configured for EFI partition support. We use the same workaround as usb-storage but have to check for different model IDs. http://marc.theaimsgroup.com/?t=114233262300001 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409 Acknowledgements: Diagnosis and therapy by Mathieu Chouquet-Stringer , additional data about affected and unaffected Apple hardware from Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon. Signed-off-by: Stefan Richter Signed-off-by: Linus Torvalds --- drivers/ieee1394/sbp2.c | 49 +++++++++++++++++++++++++++++++++++++---- drivers/ieee1394/sbp2.h | 1 + 2 files changed, 46 insertions(+), 4 deletions(-) diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index ecd59ef8c8..09e9291f18 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -151,6 +151,11 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)" * - skip mode page 8 * Suppress sending of mode_sense for mode page 8 if the device pretends to * support the SCSI Primary Block commands instead of Reduced Block Commands. + * + * - fix capacity + * Tell sd_mod to correct the last sector number reported by read_capacity. + * Avoids access beyond actual disk limits on devices with an off-by-one bug. + * Don't use this with devices which don't have this bug. */ static int sbp2_default_workarounds; module_param_named(workarounds, sbp2_default_workarounds, int, 0644); @@ -158,6 +163,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0" ", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS) ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36) ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8) + ", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY) ", or a combination)"); /* legacy parameter */ @@ -291,6 +297,7 @@ static struct hpsb_protocol_driver sbp2_driver = { */ static const struct { u32 firmware_revision; + u32 model_id; unsigned workarounds; } sbp2_workarounds_table[] = { /* TSB42AA9 */ { @@ -305,6 +312,31 @@ static const struct { /* Symbios bridge */ { .firmware_revision = 0xa0b800, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, + }, + /* + * Note about the following Apple iPod blacklist entries: + * + * There are iPods (2nd gen, 3rd gen) with model_id==0. Since our + * matching logic treats 0 as a wildcard, we cannot match this ID + * without rewriting the matching routine. Fortunately these iPods + * do not feature the read_capacity bug according to one report. + * Read_capacity behaviour as well as model_id could change due to + * Apple-supplied firmware updates though. + */ + /* iPod 4th generation */ { + .firmware_revision = 0x0a2700, + .model_id = 0x000021, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod mini */ { + .firmware_revision = 0x0a2700, + .model_id = 0x000023, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod Photo */ { + .firmware_revision = 0x0a2700, + .model_id = 0x00007e, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, } }; @@ -1556,18 +1588,25 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, } for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) { - if (sbp2_workarounds_table[i].firmware_revision != + if (sbp2_workarounds_table[i].firmware_revision && + sbp2_workarounds_table[i].firmware_revision != (firmware_revision & 0xffff00)) continue; + if (sbp2_workarounds_table[i].model_id && + sbp2_workarounds_table[i].model_id != ud->model_id) + continue; workarounds |= sbp2_workarounds_table[i].workarounds; break; } if (workarounds) - SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": " - "0x%x (firmware_revision 0x%x)", + SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x " + "(firmware_revision 0x%06x, vendor_id 0x%06x," + " model_id 0x%06x)", NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), - workarounds, firmware_revision); + workarounds, firmware_revision, + ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id, + ud->model_id); /* We would need one SCSI host template for each target to adjust * max_sectors on the fly, therefore warn only. */ @@ -2488,6 +2527,8 @@ static int sbp2scsi_slave_configure(struct scsi_device *sdev) if (sdev->type == TYPE_DISK && scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8) sdev->skip_ms_page_8 = 1; + if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY) + sdev->fix_capacity = 1; return 0; } diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index e40caf5d61..3af2710f18 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -238,6 +238,7 @@ struct sbp2_status_block { #define SBP2_WORKAROUND_128K_MAX_TRANS 0x1 #define SBP2_WORKAROUND_INQUIRY_36 0x2 #define SBP2_WORKAROUND_MODE_SENSE_8 0x4 +#define SBP2_WORKAROUND_FIX_CAPACITY 0x8 /* This is the two dma types we use for cmd_dma below */ enum cmd_dma_types { -- 2.39.5