From e853534e6b94f87e48f29e1701c3f6f8a63669c5 Mon Sep 17 00:00:00 2001 From: Horst Schirmeier Date: Mon, 5 Jun 2006 10:45:30 +0100 Subject: [PATCH] [SERIAL] typo: buad -> baud Replacing mistyped "buad" with "baud" where applicable. Signed-off-by: Horst Schirmeier Signed-off-by: Russell King --- arch/mips/ddb5xxx/ddb5476/dbg_io.c | 2 +- arch/mips/ddb5xxx/ddb5477/kgdb_io.c | 2 +- arch/mips/gt64120/ev64120/serialGT.c | 2 +- arch/mips/gt64120/momenco_ocelot/dbg_io.c | 2 +- arch/mips/ite-boards/generic/dbg_io.c | 2 +- arch/mips/momentum/jaguar_atx/dbg_io.c | 2 +- arch/mips/momentum/ocelot_c/dbg_io.c | 2 +- arch/mips/momentum/ocelot_g/dbg_io.c | 2 +- include/asm-arm/arch-l7200/serial_l7200.h | 2 +- include/asm-arm/arch-l7200/uncompress.h | 2 +- 10 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c index 85e9e50136..f2296a9999 100644 --- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c +++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c @@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c index 1d18d59049..385bbdb101 100644 --- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c +++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c @@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c index 16e34a546e..8f0d835491 100644 --- a/arch/mips/gt64120/ev64120/serialGT.c +++ b/arch/mips/gt64120/ev64120/serialGT.c @@ -149,7 +149,7 @@ void serial_set(int channel, unsigned long baud) #else /* * Note: Set baud rate, hardcoded here for rate of 115200 - * since became unsure of above "buad rate" algorithm (??). + * since became unsure of above "baud rate" algorithm (??). */ outreg(channel, LCR, 0x83); outreg(channel, DLM, 0x00); // See note above diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c index 8720bccfde..f0a6a38fcf 100644 --- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c +++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c @@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c index c4f8530fd0..6a7ccaf935 100644 --- a/arch/mips/ite-boards/generic/dbg_io.c +++ b/arch/mips/ite-boards/generic/dbg_io.c @@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c index 542eac82b6..d7dea0a136 100644 --- a/arch/mips/momentum/jaguar_atx/dbg_io.c +++ b/arch/mips/momentum/jaguar_atx/dbg_io.c @@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c index 8720bccfde..f0a6a38fcf 100644 --- a/arch/mips/momentum/ocelot_c/dbg_io.c +++ b/arch/mips/momentum/ocelot_c/dbg_io.c @@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c index 8720bccfde..f0a6a38fcf 100644 --- a/arch/mips/momentum/ocelot_g/dbg_io.c +++ b/arch/mips/momentum/ocelot_g/dbg_io.c @@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) /* disable interrupts */ UART16550_WRITE(OFS_INTR_ENABLE, 0); - /* set up buad rate */ + /* set up baud rate */ { uint32 divisor; diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h index 238c595d97..b1008a9d23 100644 --- a/include/asm-arm/arch-l7200/serial_l7200.h +++ b/include/asm-arm/arch-l7200/serial_l7200.h @@ -28,7 +28,7 @@ #define UARTDR 0x00 /* Tx/Rx data */ #define RXSTAT 0x04 /* Rx status */ #define H_UBRLCR 0x08 /* mode register high */ -#define M_UBRLCR 0x0C /* mode reg mid (MSB of buad)*/ +#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/ #define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/ #define UARTCON 0x14 /* control register */ #define UARTFLG 0x18 /* flag register */ diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h index 9fcd40aee3..04be2a0886 100644 --- a/include/asm-arm/arch-l7200/uncompress.h +++ b/include/asm-arm/arch-l7200/uncompress.h @@ -6,7 +6,7 @@ * Changelog: * 05-01-2000 SJH Created * 05-13-2000 SJH Filled in function bodies - * 07-26-2000 SJH Removed hard coded buad rate + * 07-26-2000 SJH Removed hard coded baud rate */ #include -- 2.39.5