From e58bc06ed071e43bef4e2f94340853761a4bf034 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 5 Oct 2007 15:55:06 -0400 Subject: [PATCH] [SCSI] sym53c8xx: Remove ->device_id Following the same path as ->revision_id, remove ->device_id Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_fw.c | 4 ++-- drivers/scsi/sym53c8xx_2/sym_glue.c | 4 +--- drivers/scsi/sym53c8xx_2/sym_glue.h | 1 - drivers/scsi/sym53c8xx_2/sym_hipd.c | 16 ++++++++-------- drivers/scsi/sym53c8xx_2/sym_hipd.h | 1 - drivers/scsi/sym53c8xx_2/sym_nvram.c | 2 +- 6 files changed, 12 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c index 2be0ae17e0..3d4db802c0 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw.c +++ b/drivers/scsi/sym53c8xx_2/sym_fw.c @@ -205,13 +205,13 @@ sym_fw2_patch(struct sym_hcb *np) * Remove a couple of work-arounds specific to C1010 if * they are not desirable. See `sym_fw2.h' for more details. */ - if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_66 && + if (!(np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_66 && np->s.device->revision < 0x1 && np->pciclk_khz < 60000)) { scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP); scripta0->datao_phase[1] = cpu_to_scr(0); } - if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 /* && + if (!(np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_33 /* && np->s.device->revision < 0xff */)) { scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP); scripta0->sel_done[1] = cpu_to_scr(0); diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 3ed3ed86d3..cbe31f2923 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1255,7 +1255,7 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len) copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, " "revision id 0x%x\n", np->s.chip_name, - np->device_id, np->s.device->revision); + np->s.device->device, np->s.device->revision); copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n", pci_name(np->s.device), IRQ_PRM(np->s.device->irq)); copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n", @@ -1410,7 +1410,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, np->verbose = sym_driver_setup.verbose; np->s.device = pdev; np->s.unit = unit; - np->device_id = dev->chip.device_id; np->features = dev->chip.features; np->clock_divn = dev->chip.nr_divisor; np->maxoffs = dev->chip.offset_max; @@ -1528,7 +1527,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, static void __devinit sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp) { devp->nvram = nvp; - devp->device_id = devp->chip.device_id; nvp->type = 0; sym_read_nvram(devp, nvp); diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h index d5ba5aae6c..b961f704cc 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.h +++ b/drivers/scsi/sym53c8xx_2/sym_glue.h @@ -212,7 +212,6 @@ struct sym_device { } s; struct sym_chip chip; struct sym_nvram *nvram; - u_short device_id; u_char host_id; }; diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 9f4198ce84..5443394a60 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -804,7 +804,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru * In dual channel mode, contention occurs if internal cycles * are used. Disable internal cycles. */ - if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 && + if (np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_33 && np->s.device->revision < 0x1) np->rv_ccntl0 |= DILS; @@ -828,9 +828,9 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru * this driver. The generic ncr driver that does not use * LOAD/STORE instructions does not need this work-around. */ - if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 && + if ((np->s.device->device == PCI_DEVICE_ID_NCR_53C810 && np->s.device->revision >= 0x10 && np->s.device->revision <= 0x11) || - (np->device_id == PCI_DEVICE_ID_NCR_53C860 && + (np->s.device->device == PCI_DEVICE_ID_NCR_53C860 && np->s.device->revision <= 0x1)) np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP); @@ -897,7 +897,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru if ((SYM_SETUP_SCSI_LED || (nvram->type == SYM_SYMBIOS_NVRAM || (nvram->type == SYM_TEKRAM_NVRAM && - np->device_id == PCI_DEVICE_ID_NCR_53C895))) && + np->s.device->device == PCI_DEVICE_ID_NCR_53C895))) && !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01)) np->features |= FE_LED0; @@ -1798,7 +1798,7 @@ void sym_start_up (struct sym_hcb *np, int reason) /* * For now, disable AIP generation on C1010-66. */ - if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_66) + if (np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_66) OUTB(np, nc_aipcntl1, DISAIP); /* @@ -1808,7 +1808,7 @@ void sym_start_up (struct sym_hcb *np, int reason) * that from SCRIPTS for each selection/reselection, but * I just don't want. :) */ - if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 && + if (np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_33 && np->s.device->revision < 1) OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30); @@ -1817,9 +1817,9 @@ void sym_start_up (struct sym_hcb *np, int reason) * Disable overlapped arbitration for some dual function devices, * regardless revision id (kind of post-chip-design feature. ;-)) */ - if (np->device_id == PCI_DEVICE_ID_NCR_53C875) + if (np->s.device->device == PCI_DEVICE_ID_NCR_53C875) OUTB(np, nc_ctest0, (1<<5)); - else if (np->device_id == PCI_DEVICE_ID_NCR_53C896) + else if (np->s.device->device == PCI_DEVICE_ID_NCR_53C896) np->rv_ccntl0 |= DPR; /* diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 3aa8060a4d..b8908e1016 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -918,7 +918,6 @@ struct sym_hcb { /* * General controller parameters and configuration. */ - u_short device_id; /* PCI device id */ u_int features; /* Chip features map */ u_char myaddr; /* SCSI id of the adapter */ u_char maxburst; /* log base 2 of dwords burst */ diff --git a/drivers/scsi/sym53c8xx_2/sym_nvram.c b/drivers/scsi/sym53c8xx_2/sym_nvram.c index 15d69298ab..5662fbb3ff 100644 --- a/drivers/scsi/sym53c8xx_2/sym_nvram.c +++ b/drivers/scsi/sym53c8xx_2/sym_nvram.c @@ -696,7 +696,7 @@ static int sym_read_Tekram_nvram (struct sym_device *np, Tekram_nvram *nvram) u_short csum; int x; - switch (np->device_id) { + switch (np->pdev->device) { case PCI_DEVICE_ID_NCR_53C885: case PCI_DEVICE_ID_NCR_53C895: case PCI_DEVICE_ID_NCR_53C896: -- 2.39.5