From e4d06e39530559513c7e335ef7ca4675f8146220 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 16 Feb 2007 12:12:31 +0100 Subject: [PATCH] [ARM] 4198/2: S3C2443: arch/arm/mach-s3c2443 and related support Add arch/arm/mach-s3c2443 for support of the Samsung S3C2443 SoC This patch adds the core CPU support, clock framework, times and initial IRQ support, as well as adding the directory into the build tree. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/Kconfig | 3 +- arch/arm/Makefile | 1 + arch/arm/mach-s3c2443/Kconfig | 18 + arch/arm/mach-s3c2443/Makefile | 16 + arch/arm/mach-s3c2443/clock.c | 1007 ++++++++++++++++++++++++ arch/arm/mach-s3c2443/irq.c | 130 +++ arch/arm/mach-s3c2443/s3c2443.c | 87 ++ arch/arm/plat-s3c24xx/cpu.c | 11 + arch/arm/plat-s3c24xx/s3c244x.c | 2 +- include/asm-arm/plat-s3c24xx/cpu.h | 1 + include/asm-arm/plat-s3c24xx/s3c2443.h | 32 + 11 files changed, 1306 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-s3c2443/Kconfig create mode 100644 arch/arm/mach-s3c2443/Makefile create mode 100644 arch/arm/mach-s3c2443/clock.c create mode 100644 arch/arm/mach-s3c2443/irq.c create mode 100644 arch/arm/mach-s3c2443/s3c2443.c create mode 100644 include/asm-arm/plat-s3c24xx/s3c2443.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 51ee13e7c7..0f711c4394 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -303,7 +303,7 @@ config ARCH_SA1100 Support for StrongARM 11x0 based boards. config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442" + bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (), the IPAQ 1940 or @@ -371,6 +371,7 @@ source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" source "arch/arm/mach-s3c2442/Kconfig" +source "arch/arm/mach-s3c2443/Kconfig" endif source "arch/arm/mach-lh7a40x/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2df1ea0a0c..93e4747267 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -165,6 +165,7 @@ core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2400/ core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2412/ core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2440/ core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2442/ +core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2443/ core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig new file mode 100644 index 0000000000..0d8d7bf9a9 --- /dev/null +++ b/arch/arm/mach-s3c2443/Kconfig @@ -0,0 +1,18 @@ +# arch/arm/mach-s3c2443/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config CPU_S3C2443 + bool + depends on ARCH_S3C2410 + select S3C2443_PM if PM + select S3C2443_DMA if S3C2410_DMA + help + Support for the S3C2443 SoC from the S3C24XX line + +menu "S3C2443 Machines" + +endmenu + diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile new file mode 100644 index 0000000000..397475affb --- /dev/null +++ b/arch/arm/mach-s3c2443/Makefile @@ -0,0 +1,16 @@ +# arch/arm/mach-s3c2443/Makefile +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += irq.o +obj-$(CONFIG_CPU_S3C2443) += clock.o + +# Machine support diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c new file mode 100644 index 0000000000..dd2272fb11 --- /dev/null +++ b/arch/arm/mach-s3c2443/clock.c @@ -0,0 +1,1007 @@ +/* linux/arch/arm/mach-s3c2443/clock.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks + * + * S3C2443 Clock control support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include + +#include +#include +#include + +/* We currently have to assume that the system is running + * from the XTPll input, and that all ***REFCLKs are being + * fed from it, as we cannot read the state of OM[4] from + * software. + * + * It would be possible for each board initialisation to + * set the correct muxing at initialisation +*/ + +static int s3c2443_clkcon_enable_h(struct clk *clk, int enable) +{ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; + + clkcon = __raw_readl(S3C2443_HCLKCON); + + if (enable) + clkcon |= clocks; + else + clkcon &= ~clocks; + + __raw_writel(clkcon, S3C2443_HCLKCON); + + return 0; +} + +static int s3c2443_clkcon_enable_p(struct clk *clk, int enable) +{ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; + + clkcon = __raw_readl(S3C2443_PCLKCON); + + if (enable) + clkcon |= clocks; + else + clkcon &= ~clocks; + + __raw_writel(clkcon, S3C2443_HCLKCON); + + return 0; +} + +static int s3c2443_clkcon_enable_s(struct clk *clk, int enable) +{ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; + + clkcon = __raw_readl(S3C2443_SCLKCON); + + if (enable) + clkcon |= clocks; + else + clkcon &= ~clocks; + + __raw_writel(clkcon, S3C2443_SCLKCON); + + return 0; +} + +static unsigned long s3c2443_roundrate_clksrc(struct clk *clk, + unsigned long rate, + unsigned int max) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + return parent_rate; + + /* note, we remove the +/- 1 calculations as they cancel out */ + + div = (rate / parent_rate); + + if (div < 1) + div = 1; + else if (div > max) + div = max; + + return parent_rate / div; +} + +static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk, + unsigned long rate) +{ + return s3c2443_roundrate_clksrc(clk, rate, 4); +} + +static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk, + unsigned long rate) +{ + return s3c2443_roundrate_clksrc(clk, rate, 16); +} + +static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk, + unsigned long rate) +{ + return s3c2443_roundrate_clksrc(clk, rate, 256); +} + +/* clock selections */ + +/* CPU EXTCLK input */ +static struct clk clk_ext = { + .name = "ext", + .id = -1, +}; + +static struct clk clk_mpllref = { + .name = "mpllref", + .parent = &clk_xtal, + .id = -1, +}; + +#if 0 +static struct clk clk_mpll = { + .name = "mpll", + .parent = &clk_mpllref, + .id = -1, +}; +#endif + +static struct clk clk_epllref; + +static struct clk clk_epll = { + .name = "epll", + .parent = &clk_epllref, + .id = -1, +}; + +static struct clk clk_i2s_ext = { + .name = "i2s-ext", + .id = -1, +}; + +static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + + clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK; + + if (parent == &clk_xtal) + clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL; + else if (parent == &clk_ext) + clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK; + else if (parent != &clk_mpllref) + return -EINVAL; + + __raw_writel(clksrc, S3C2443_CLKSRC); + clk->parent = parent; + + return 0; +} + +static struct clk clk_epllref = { + .name = "epllref", + .id = -1, + .set_parent = s3c2443_setparent_epllref, +}; + +static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV0); + + div &= S3C2443_CLKDIV0_EXTDIV_MASK; + div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ + + return parent_rate / (div + 1); +} + +static struct clk clk_mdivclk = { + .name = "mdivclk", + .parent = &clk_mpllref, + .id = -1, + .get_rate = s3c2443_getrate_mdivclk, +}; + + +static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + + clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL | + S3C2443_CLKSRC_EXTCLK_DIV); + + if (parent == &clk_mpll) + clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL; + else if (parent == &clk_mdivclk) + clksrc |= S3C2443_CLKSRC_EXTCLK_DIV; + else if (parent != &clk_mpllref) + return -EINVAL; + + __raw_writel(clksrc, S3C2443_CLKSRC); + clk->parent = parent; + + return 0; +} + +static struct clk clk_msysclk = { + .name = "msysclk", + .parent = &clk_xtal, + .id = -1, + .set_parent = s3c2443_setparent_msysclk, +}; + + +/* esysclk + * + * this is sourced from either the EPLL or the EPLLref clock +*/ + +static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + + if (parent == &clk_epll) + clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL; + else if (parent == &clk_epllref) + clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL; + else + return -EINVAL; + + __raw_writel(clksrc, S3C2443_CLKSRC); + clk->parent = parent; + + return 0; +} + +static struct clk clk_esysclk = { + .name = "esysclk", + .parent = &clk_epll, + .id = -1, + .set_parent = s3c2443_setparent_esysclk, +}; + +/* uartclk + * + * UART baud-rate clock sourced from esysclk via a divisor +*/ + +static unsigned long s3c2443_getrate_uart(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_UARTDIV_MASK; + div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT; + + return parent_rate / (div + 1); +} + + +static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc16(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_uart = { + .name = "uartclk", + .id = -1, + .parent = &clk_esysclk, + .get_rate = s3c2443_getrate_uart, + .set_rate = s3c2443_setrate_uart, + .round_rate = s3c2443_roundrate_clksrc16, +}; + +/* hsspi + * + * high-speed spi clock, sourced from esysclk +*/ + +static unsigned long s3c2443_getrate_hsspi(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_HSSPIDIV_MASK; + div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT; + + return parent_rate / (div + 1); +} + + +static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc4(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_hsspi = { + .name = "hsspi", + .id = -1, + .parent = &clk_esysclk, + .ctrlbit = S3C2443_SCLKCON_HSSPICLK, + .enable = s3c2443_clkcon_enable_s, + .get_rate = s3c2443_getrate_hsspi, + .set_rate = s3c2443_setrate_hsspi, + .round_rate = s3c2443_roundrate_clksrc4, +}; + +/* usbhost + * + * usb host bus-clock, usually 48MHz to provide USB bus clock timing +*/ + +static unsigned long s3c2443_getrate_usbhost(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK; + div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc4(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +struct clk clk_usb_bus_host = { + .name = "usb-bus-host-parent", + .id = -1, + .parent = &clk_esysclk, + .ctrlbit = S3C2443_SCLKCON_USBHOST, + .enable = s3c2443_clkcon_enable_s, + .get_rate = s3c2443_getrate_usbhost, + .set_rate = s3c2443_setrate_usbhost, + .round_rate = s3c2443_roundrate_clksrc4, +}; + +/* clk_hsmcc_div + * + * this clock is sourced from epll, and is fed through a divider, + * to a mux controlled by sclkcon where either it or a extclk can + * be fed to the hsmmc block +*/ + +static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_HSMMCDIV_MASK; + div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc4(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_hsmmc_div = { + .name = "hsmmc-div", + .id = -1, + .parent = &clk_esysclk, + .get_rate = s3c2443_getrate_hsmmc_div, + .set_rate = s3c2443_setrate_hsmmc_div, + .round_rate = s3c2443_roundrate_clksrc4, +}; + +static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); + + clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | + S3C2443_SCLKCON_HSMMCCLK_EPLL); + + if (parent == &clk_epll) + clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; + else if (parent == &clk_ext) + clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; + else + return -EINVAL; + + if (clk->usage > 0) { + __raw_writel(clksrc, S3C2443_SCLKCON); + } + + clk->parent = parent; + return 0; +} + +static int s3c2443_enable_hsmmc(struct clk *clk, int enable) +{ + return s3c2443_setparent_hsmmc(clk, clk->parent); +} + +static struct clk clk_hsmmc = { + .name = "hsmmc-if", + .id = -1, + .parent = &clk_hsmmc_div, + .enable = s3c2443_enable_hsmmc, + .set_parent = s3c2443_setparent_hsmmc, +}; + +/* i2s_eplldiv + * + * this clock is the output from the i2s divisor of esysclk +*/ + +static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_I2SDIV_MASK; + div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc16(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_i2s_eplldiv = { + .name = "i2s-eplldiv", + .id = -1, + .parent = &clk_esysclk, + .get_rate = s3c2443_getrate_i2s_eplldiv, + .set_rate = s3c2443_setrate_i2s_eplldiv, + .round_rate = s3c2443_roundrate_clksrc16, +}; + +/* i2s-ref + * + * i2s bus reference clock, selectable from external, esysclk or epllref +*/ + +static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + + clksrc &= ~S3C2443_CLKSRC_I2S_MASK; + + if (parent == &clk_epllref) + clksrc |= S3C2443_CLKSRC_I2S_EPLLREF; + else if (parent == &clk_i2s_ext) + clksrc |= S3C2443_CLKSRC_I2S_EXT; + else if (parent != &clk_i2s_eplldiv) + return -EINVAL; + + clk->parent = parent; + __raw_writel(clksrc, S3C2443_CLKSRC); + + return 0; +} + +static struct clk clk_i2s = { + .name = "i2s-if", + .id = -1, + .parent = &clk_i2s_eplldiv, + .ctrlbit = S3C2443_SCLKCON_I2SCLK, + .enable = s3c2443_clkcon_enable_s, + .set_parent = s3c2443_setparent_i2s, +}; + +/* cam-if + * + * camera interface bus-clock, divided down from esysclk +*/ + +static unsigned long s3c2443_getrate_cam(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_CAMDIV_MASK; + div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc16(clk, rate); + rate = parent_rate / rate; + + clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK; + clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT; + + __raw_writel(clkdiv1, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_cam = { + .name = "camif-upll", /* same as 2440 name */ + .id = -1, + .parent = &clk_esysclk, + .ctrlbit = S3C2443_SCLKCON_CAMCLK, + .enable = s3c2443_clkcon_enable_s, + .get_rate = s3c2443_getrate_cam, + .set_rate = s3c2443_setrate_cam, + .round_rate = s3c2443_roundrate_clksrc16, +}; + +/* display-if + * + * display interface clock, divided from esysclk +*/ + +static unsigned long s3c2443_getrate_display(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV1); + + div &= S3C2443_CLKDIV1_DISPDIV_MASK; + div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT; + + return parent_rate / (div + 1); +} + +static int s3c2443_setrate_display(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); + + rate = s3c2443_roundrate_clksrc256(clk, rate); + rate = parent_rate / rate; + + clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK; + clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT; + + __raw_writel(clkdivn, S3C2443_CLKDIV1); + return 0; +} + +static struct clk clk_display = { + .name = "display-if", + .id = -1, + .parent = &clk_esysclk, + .ctrlbit = S3C2443_SCLKCON_DISPCLK, + .enable = s3c2443_clkcon_enable_s, + .get_rate = s3c2443_getrate_display, + .set_rate = s3c2443_setrate_display, + .round_rate = s3c2443_roundrate_clksrc256, +}; + +/* standard clock definitions */ + +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + }, { + .name = "sdi", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_SDI, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIC, + }, { + .name = "iis", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIS, + }, { + .name = "spi", + .id = 0, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_SPI1, + } +}; + +static struct clk init_clocks[] = { + { + .name = "dma", + .id = 0, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA0, + }, { + .name = "dma", + .id = 1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA1, + }, { + .name = "dma", + .id = 2, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA2, + }, { + .name = "dma", + .id = 3, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA3, + }, { + .name = "dma", + .id = 4, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA4, + }, { + .name = "dma", + .id = 5, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA5, + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_LCDC, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBD, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_PWMT, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART3, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C2443_PCLKCON_WDT, + }, { + .name = "usb-bus-host", + .id = -1, + .parent = &clk_usb_bus_host, + } +}; + +/* clocks to add where we need to check their parentage */ + +/* s3c2443_clk_initparents + * + * Initialise the parents for the clocks that we get at start-time +*/ + +static int __init clk_init_set_parent(struct clk *clk, struct clk *parent) +{ + printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name); + return clk_set_parent(clk, parent); +} + +static void __init s3c2443_clk_initparents(void) +{ + unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + struct clk *parent; + + switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) { + case S3C2443_CLKSRC_EPLLREF_EXTCLK: + parent = &clk_ext; + break; + + case S3C2443_CLKSRC_EPLLREF_XTAL: + default: + parent = &clk_xtal; + break; + + case S3C2443_CLKSRC_EPLLREF_MPLLREF: + case S3C2443_CLKSRC_EPLLREF_MPLLREF2: + parent = &clk_mpllref; + break; + } + + clk_init_set_parent(&clk_epllref, parent); + + switch (clksrc & S3C2443_CLKSRC_I2S_MASK) { + case S3C2443_CLKSRC_I2S_EXT: + parent = &clk_i2s_ext; + break; + + case S3C2443_CLKSRC_I2S_EPLLDIV: + default: + parent = &clk_i2s_eplldiv; + break; + + case S3C2443_CLKSRC_I2S_EPLLREF: + case S3C2443_CLKSRC_I2S_EPLLREF3: + parent = &clk_epllref; + } + + clk_init_set_parent(&clk_i2s, &clk_epllref); + + /* esysclk source */ + + parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ? + &clk_epll : &clk_epllref; + + clk_init_set_parent(&clk_esysclk, parent); + + /* msysclk source */ + + if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) { + parent = &clk_mpll; + } else { + parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ? + &clk_mdivclk : &clk_mpllref; + } + + clk_init_set_parent(&clk_msysclk, parent); +} + +/* armdiv divisor table */ + +static unsigned int armdiv[16] = { + [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, + [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, + [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, + [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, + [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, + [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, + [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, + [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, +}; + +static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0) +{ + clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + + return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; +} + +static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0) +{ + clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK; + clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; + + return clkcon0 + 1; +} + +/* clocks to add straight away */ + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_epll, + &clk_usb_bus_host, + &clk_usb_bus, + &clk_esysclk, + &clk_epllref, + &clk_mpllref, + &clk_msysclk, + &clk_uart, + &clk_display, + &clk_cam, + &clk_i2s_eplldiv, + &clk_i2s, + &clk_hsspi, + &clk_hsmmc_div, + &clk_hsmmc, +}; + +void __init s3c2443_init_clocks(int xtal) +{ + unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); + unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + unsigned long pll; + unsigned long fclk; + unsigned long hclk; + unsigned long pclk; + struct clk *clkp; + int ret; + int ptr; + + pll = s3c2443_get_mpll(mpllcon, xtal); + + fclk = pll / s3c2443_fclk_div(clkdiv0); + hclk = fclk / s3c2443_get_prediv(clkdiv0); + hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1); + pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); + + s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); + + printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", + (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(pll), print_mhz(fclk), + print_mhz(hclk), print_mhz(pclk)); + + s3c2443_clk_initparents(); + + for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { + clkp = clks[ptr]; + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + clk_epll.rate = s3c2443_get_epll(epllcon, xtal); + + clk_usb_bus.parent = &clk_usb_bus_host; + + /* ensure usb bus clock is within correct rate of 48MHz */ + + if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) { + printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); + clk_set_rate(&clk_usb_bus_host, 48*1000*1000); + } + + printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", + (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(clk_get_rate(&clk_epll)), + print_mhz(clk_get_rate(&clk_usb_bus))); + + /* register clocks from clock array */ + + clkp = init_clocks; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + /* We must be careful disabling the clocks we are not intending to + * be using at boot time, as subsytems such as the LCD which do + * their own DMA requests to the bus can cause the system to lockup + * if they where in the middle of requesting bus access. + * + * Disabling the LCD clock if the LCD is active is very dangerous, + * and therefore the bootloader should be careful to not enable + * the LCD clock if it is not needed. + */ + + /* install (and disable) the clocks we do not need immediately */ + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + + (clkp->enable)(clkp, 0); + } +} diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c new file mode 100644 index 0000000000..f7058823a0 --- /dev/null +++ b/arch/arm/mach-s3c2443/irq.c @@ -0,0 +1,130 @@ +/* linux/arch/arm/mach-s3c2443/irq.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include + +#include +#include +#include + +/* WDT/AC97 */ + +static void s3c_irq_demux_wdtac97(unsigned int irq, + struct irq_desc *desc) +{ + unsigned int subsrc, submsk; + struct irq_desc *mydesc; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= 27; + subsrc &= 3; + + if (subsrc != 0) { + if (subsrc & 1) { + mydesc = irq_desc + IRQ_S3C2443_WDT; + desc_handle_irq(IRQ_S3C2443_WDT, mydesc); + } + if (subsrc & 2) { + mydesc = irq_desc + IRQ_S3C2443_AC97; + desc_handle_irq(IRQ_S3C2443_AC97, mydesc); + } + } +} + + +#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) + +static void +s3c_irq_wdtac97_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<27); +} + +static void +s3c_irq_wdtac97_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_WDT); +} + +static void +s3c_irq_wdtac97_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<27); +} + +static struct irq_chip s3c_irq_wdtac97 = { + .mask = s3c_irq_wdtac97_mask, + .unmask = s3c_irq_wdtac97_unmask, + .ack = s3c_irq_wdtac97_ack, +}; + +static int s3c2443_irq_add(struct sys_device *sysdev) +{ + unsigned int irqno; + + printk("S3C2443: IRQ Support\n"); + + /* add new chained handler for wdt, ac7 */ + + set_irq_chip(IRQ_WDT, &s3c_irq_level_chip); + set_irq_handler(IRQ_WDT, handle_level_irq); + set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); + + for (irqno = IRQ_S3C2443_WDT; irqno <= IRQ_S3C2443_AC97; irqno++) { + set_irq_chip(irqno, &s3c_irq_wdtac97); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static struct sysdev_driver s3c2443_irq_driver = { + .add = s3c2443_irq_add, +}; + +static int s3c2443_irq_init(void) +{ + return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver); +} + +arch_initcall(s3c2443_irq_init); + diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c new file mode 100644 index 0000000000..bc14f772ff --- /dev/null +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -0,0 +1,87 @@ +/* linux/arch/arm/mach-s3c2443/s3c2443.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks + * + * Samsung S3C2443 Mobile CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include +#include + +static struct map_desc s3c2443_iodesc[] __initdata = { + IODESC_ENT(WATCHDOG), + IODESC_ENT(CLKPWR), + IODESC_ENT(TIMER), +}; + +struct sysdev_class s3c2443_sysclass = { + set_kset_name("s3c2443-core"), +}; + +static struct sys_device s3c2443_sysdev = { + .cls = &s3c2443_sysclass, +}; + +int __init s3c2443_init(void) +{ + printk("S3C2443: Initialising architecture\n"); + + return sysdev_register(&s3c2443_sysdev); +} + +void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); +} + +/* s3c2443_map_io + * + * register the standard cpu IO areas, and any passed in from the + * machine specific initialisation. + */ + +void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size) +{ + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); + iotable_init(mach_desc, mach_size); +} + +/* need to register class before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2443 based system) + * as a driver which may support both 2443 and 2440 may try and use it. +*/ + +static int __init s3c2443_core_init(void) +{ + return sysdev_class_register(&s3c2443_sysclass); +} + +core_initcall(s3c2443_core_init); diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 2fbb749693..6a2d1070e5 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -49,6 +49,7 @@ #include "s3c244x.h" #include #include +#include struct cpu_table { unsigned long idcode; @@ -67,6 +68,7 @@ static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; +static const char name_s3c2443[] = "S3C2443"; static const char name_s3c2410a[] = "S3C2410A"; static const char name_s3c2440a[] = "S3C2440A"; @@ -134,6 +136,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2412_init, .name = name_s3c2412, }, + { + .idcode = 0x32443001, + .idmask = 0xffffffff, + .map_io = s3c2443_map_io, + .init_clocks = s3c2443_init_clocks, + .init_uarts = s3c2443_init_uarts, + .init = s3c2443_init, + .name = name_s3c2443, + }, { .idcode = 0x0, /* S3C2400 doesn't have an idcode */ .idmask = 0xffffffff, diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 87aace4c8f..767f2e9a3a 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -3,7 +3,7 @@ * Copyright (c) 2004-2006 Simtec Electronics * Ben Dooks * - * Samsung S3C2440 and S3C2442 Mobile CPU support + * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h index 8181b22532..15dd188109 100644 --- a/include/asm-arm/plat-s3c24xx/cpu.h +++ b/include/asm-arm/plat-s3c24xx/cpu.h @@ -67,3 +67,4 @@ extern struct sysdev_class s3c2410_sysclass; extern struct sysdev_class s3c2412_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; +extern struct sysdev_class s3c2443_sysclass; diff --git a/include/asm-arm/plat-s3c24xx/s3c2443.h b/include/asm-arm/plat-s3c24xx/s3c2443.h new file mode 100644 index 0000000000..11d83b5c84 --- /dev/null +++ b/include/asm-arm/plat-s3c24xx/s3c2443.h @@ -0,0 +1,32 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks + * + * Header file for s3c2443 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2443 + +struct s3c2410_uartcfg; + +extern int s3c2443_init(void); + +extern void s3c2443_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2443_init_clocks(int xtal); + +extern int s3c2443_baseclk_add(void); + +#else +#define s3c2443_init_clocks NULL +#define s3c2443_init_uarts NULL +#define s3c2443_map_io NULL +#define s3c2443_init NULL +#endif -- 2.39.5