From e45da35e180a4fc91307648d021a598495742c32 Mon Sep 17 00:00:00 2001 From: Carlos O'Donell Date: Sat, 16 Sep 2006 14:35:51 -0400 Subject: [PATCH] [PARISC] Document that D-class can also use serial_mux Signed-off-by: Carlos O'Donell Signed-off-by: Kyle McMartin --- drivers/serial/Kconfig | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 653098bc2d..8edee74588 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -556,10 +556,11 @@ config SERIAL_MUX default y ---help--- Saying Y here will enable the hardware MUX serial driver for - the Nova and K class systems. The hardware MUX is not 8250/16550 - compatible therefore the /dev/ttyB0 device is shared between the - Serial MUX and the PDC software console. The following steps - need to be completed to use the Serial MUX: + the Nova, K class systems and D class with a 'remote control card'. + The hardware MUX is not 8250/16550 compatible therefore the + /dev/ttyB0 device is shared between the Serial MUX and the PDC + software console. The following steps need to be completed to use + the Serial MUX: 1. create the device entry (mknod /dev/ttyB0 c 11 0) 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 -- 2.39.5