From e2839d8f509451acf6b1f22787f25ce98383d94c Mon Sep 17 00:00:00 2001 From: Vladimir Koutny Date: Tue, 18 Mar 2008 21:14:07 +0100 Subject: [PATCH] mac80211: configure default wmm params correctly Default WMM params have to be set according to beacon/probe response information prior to authentication (or IBSS start/join); beacon queue is configured only in IBSS. This does not affect the use of 'real' WMM params as reported by AP. Signed-off-by: Vladimir Koutny Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ieee80211_sta.c | 91 +++++++++++++++++++++++------------- 1 file changed, 58 insertions(+), 33 deletions(-) diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c index bf130b6255..cf51ca6804 100644 --- a/net/mac80211/ieee80211_sta.c +++ b/net/mac80211/ieee80211_sta.c @@ -220,6 +220,61 @@ static int ecw2cw(int ecw) return (1 << ecw) - 1; } + +static void ieee80211_sta_def_wmm_params(struct net_device *dev, + struct ieee80211_sta_bss *bss, + int ibss) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + int i, have_higher_than_11mbit = 0; + + + /* cf. IEEE 802.11 9.2.12 */ + for (i = 0; i < bss->supp_rates_len; i++) + if ((bss->supp_rates[i] & 0x7f) * 5 > 110) + have_higher_than_11mbit = 1; + + if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ && + have_higher_than_11mbit) + sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; + else + sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; + + + if (local->ops->conf_tx) { + struct ieee80211_tx_queue_params qparam; + int i; + + memset(&qparam, 0, sizeof(qparam)); + + qparam.aifs = 2; + + if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ && + !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)) + qparam.cw_min = 31; + else + qparam.cw_min = 15; + + qparam.cw_max = 1023; + qparam.txop = 0; + + for (i = IEEE80211_TX_QUEUE_DATA0; i < NUM_TX_DATA_QUEUES; i++) + local->ops->conf_tx(local_to_hw(local), + i + IEEE80211_TX_QUEUE_DATA0, + &qparam); + + if (ibss) { + /* IBSS uses different parameters for Beacon sending */ + qparam.cw_min++; + qparam.cw_min *= 2; + qparam.cw_min--; + local->ops->conf_tx(local_to_hw(local), + IEEE80211_TX_QUEUE_BEACON, &qparam); + } + } +} + static void ieee80211_sta_wmm_params(struct net_device *dev, struct ieee80211_if_sta *ifsta, u8 *wmm_param, size_t wmm_param_len) @@ -2302,6 +2357,8 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, rates |= BIT(j); } ifsta->supp_rates_bits[local->hw.conf.channel->band] = rates; + + ieee80211_sta_def_wmm_params(dev, bss, 1); } while (0); if (skb) { @@ -3293,6 +3350,7 @@ static int ieee80211_sta_config_auth(struct net_device *dev, ieee80211_sta_set_ssid(dev, selected->ssid, selected->ssid_len); ieee80211_sta_set_bssid(dev, selected->bssid); + ieee80211_sta_def_wmm_params(dev, selected, 0); ieee80211_rx_bss_put(dev, selected); ifsta->state = IEEE80211_AUTHENTICATE; ieee80211_sta_reset_auth(dev, ifsta); @@ -3467,43 +3525,10 @@ int ieee80211_sta_set_ssid(struct net_device *dev, char *ssid, size_t len) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_if_sta *ifsta; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); if (len > IEEE80211_MAX_SSID_LEN) return -EINVAL; - /* TODO: This should always be done for IBSS, even if IEEE80211_QOS is - * not defined. */ - if (local->ops->conf_tx) { - struct ieee80211_tx_queue_params qparam; - int i; - - memset(&qparam, 0, sizeof(qparam)); - - qparam.aifs = 2; - - if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ && - !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)) - qparam.cw_min = 31; - else - qparam.cw_min = 15; - - qparam.cw_max = 1023; - qparam.txop = 0; - - for (i = IEEE80211_TX_QUEUE_DATA0; i < NUM_TX_DATA_QUEUES; i++) - local->ops->conf_tx(local_to_hw(local), - i + IEEE80211_TX_QUEUE_DATA0, - &qparam); - - /* IBSS uses different parameters for Beacon sending */ - qparam.cw_min++; - qparam.cw_min *= 2; - qparam.cw_min--; - local->ops->conf_tx(local_to_hw(local), - IEEE80211_TX_QUEUE_BEACON, &qparam); - } - ifsta = &sdata->u.sta; if (ifsta->ssid_len != len || memcmp(ifsta->ssid, ssid, len) != 0) -- 2.39.5