From e0f0b37a3e624440b1b0e8a5978b367895226e75 Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Mon, 19 Nov 2007 11:22:03 -0300 Subject: [PATCH] V4L/DVB (6646): xc2028: rework firmware (re)loading process Define a list of valid "firmware types" for each combination of BASE, DTV and SCODEs. By masking the appropriate firmware bits off we can just use one "type" for the firmware searching and also flag when we are looking for a BASE, DTV or SCODE type firmware. This makes it much easier to track if we need to change device modes or flash an individual firmware part. Add a structure to remember what firmware properties we have. This contains the currently loaded/wanted base firmware (type), video std (id), video std requested (std_req), scode file and number in use. Incorporate said structure into the tuner private data. When checking whether the current firmware needs to be reloaded, first figure out exactly what "type" of firmware we want (base, std and scode), and then proceed to load the appropriate matching base, std-specific and scode records iff there are any changes required. This removes guesswork from the process because we no longer need to individually code a check for every tuning parameter's interactions. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028-types.h | 8 + drivers/media/video/tuner-xc2028.c | 212 ++++++++++++----------- drivers/media/video/tuner-xc2028.h | 1 + 3 files changed, 124 insertions(+), 97 deletions(-) diff --git a/drivers/media/video/tuner-xc2028-types.h b/drivers/media/video/tuner-xc2028-types.h index a9e2e0562d..6cee48193c 100644 --- a/drivers/media/video/tuner-xc2028-types.h +++ b/drivers/media/video/tuner-xc2028-types.h @@ -8,6 +8,7 @@ /* BASE firmware should be loaded before any other firmware */ #define BASE (1<<0) +#define BASE_TYPES (BASE|F8MHZ|MTS|FM|INPUT1|INPUT2|INIT1) /* F8MHZ marks BASE firmwares for 8 MHz Bandwidth */ #define F8MHZ (1<<1) @@ -37,6 +38,8 @@ #define DTV78 (1<<8) #define DTV8 (1<<9) +#define DTV_TYPES (D2620|D2633|DTV6|QAM|DTV7|DTV78|DTV8|ATSC) + /* There's a FM | BASE firmware + FM specific firmware (std=0) */ #define FM (1<<10) @@ -60,6 +63,7 @@ /* Old firmwares were broken into init0 and init1 */ #define INIT1 (1<<14) +/* SCODE firmware selects particular behaviours */ #define MONO (1 << 15) #define ATSC (1 << 16) #define IF (1 << 17) @@ -76,6 +80,10 @@ #define INPUT2 (1 << 28) #define SCODE (1 << 29) +#define SCODE_TYPES (MTS|DTV6|QAM|DTV7|DTV78|DTV8|LCD|NOGD|MONO|ATSC|IF| \ + LG60|ATI638|OREN538|OREN36|TOYOTA388|TOYOTA794| \ + DIBCOM52|ZARLINK456|CHINA|F6MHZ|SCODE) + /* Newer types to be moved to videodev2.h */ #define V4L2_STD_SECAM_K3 (0x04000000) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index a5efd5f6e5..8140d8ad07 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -54,6 +54,14 @@ struct firmware_description { unsigned int size; }; +struct firmware_properties { + unsigned int type; + v4l2_std_id id; + v4l2_std_id std_req; + unsigned int scode_table; + int scode_nr; +}; + struct xc2028_data { struct list_head xc2028_list; struct tuner_i2c_props i2c_props; @@ -69,14 +77,7 @@ struct xc2028_data { struct xc2028_ctrl ctrl; - v4l2_std_id firm_type; /* video stds supported - by current firmware */ - fe_bandwidth_t bandwidth; /* Firmware bandwidth: - 6M, 7M or 8M */ - int need_load_generic; /* The generic firmware - were loaded? */ - enum tuner_mode mode; - struct i2c_client *i2c_client; + struct firmware_properties cur_fw; struct mutex lock; }; @@ -234,7 +235,8 @@ static void free_firmware(struct xc2028_data *priv) priv->firm = NULL; priv->firm_size = 0; - priv->need_load_generic = 1; + + memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); } static int load_all_firmwares(struct dvb_frontend *fe) @@ -393,6 +395,13 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, if (((type & ~SCODE) == 0) && (*id == 0)) *id = V4L2_STD_PAL; + if (type & BASE) + type &= BASE_TYPES; + else if (type & SCODE) + type &= SCODE_TYPES; + else if (type & DTV_TYPES) + type = type & DTV_TYPES; + /* Seek for exact match */ for (i = 0; i < priv->firm_size; i++) { if ((type == priv->firm[i].type) && (*id == priv->firm[i].id)) @@ -598,11 +607,10 @@ static int check_firmware(struct dvb_frontend *fe, enum tuner_mode new_mode, v4l2_std_id std, fe_bandwidth_t bandwidth) { struct xc2028_data *priv = fe->tuner_priv; - int rc; + int rc = 0; + unsigned int type = 0; + struct firmware_properties new_fw; u16 version, hwmodel; - v4l2_std_id std0 = 0; - unsigned int type0 = 0, type = 0; - int change_digital_bandwidth; tuner_dbg("%s called\n", __FUNCTION__); @@ -617,61 +625,19 @@ static int check_firmware(struct dvb_frontend *fe, enum tuner_mode new_mode, return rc; } - tuner_dbg("I am in mode %u and I should switch to mode %i\n", - priv->mode, new_mode); - - /* first of all, determine whether we have switched the mode */ - if (new_mode != priv->mode) { - priv->mode = new_mode; - priv->need_load_generic = 1; - } - - change_digital_bandwidth = (priv->mode == T_DIGITAL_TV - && bandwidth != priv->bandwidth) ? 1 : 0; - tuner_dbg("old bandwidth %u, new bandwidth %u\n", priv->bandwidth, - bandwidth); - - if (priv->need_load_generic) { - /* Reset is needed before loading firmware */ - rc = priv->tuner_callback(priv->video_dev, - XC2028_TUNER_RESET, 0); - if (rc < 0) - return rc; - - type0 = BASE; - - if (priv->ctrl.type == XC2028_FIRM_MTS) - type0 |= MTS; - - if (bandwidth == BANDWIDTH_7_MHZ || - bandwidth == BANDWIDTH_8_MHZ) - type0 |= F8MHZ; - - /* FIXME: How to load FM and FM|INPUT1 firmwares? */ - - rc = load_firmware(fe, type0, &std0); - if (rc < 0) { - tuner_err("Error %d while loading generic firmware\n", - rc); - return rc; - } - - priv->need_load_generic = 0; - priv->firm_type = 0; - if (priv->mode == T_DIGITAL_TV) - change_digital_bandwidth = 1; - } + if (priv->ctrl.type == XC2028_FIRM_MTS) + type |= MTS; + if (bandwidth == BANDWIDTH_7_MHZ || bandwidth == BANDWIDTH_8_MHZ) + type |= F8MHZ; - tuner_dbg("I should change bandwidth %u\n", change_digital_bandwidth); + /* FIXME: How to load FM and FM|INPUT1 firmwares? */ - if (change_digital_bandwidth) { + if (new_mode == T_DIGITAL_TV) { if (priv->ctrl.d2633) type |= D2633; else type |= D2620; - /* FIXME: When should select a DTV78 firmware? - */ switch (bandwidth) { case BANDWIDTH_8_MHZ: type |= DTV8; @@ -683,49 +649,96 @@ static int check_firmware(struct dvb_frontend *fe, enum tuner_mode new_mode, /* FIXME: Should allow select also ATSC */ type |= DTV6 | QAM; break; - default: tuner_err("error: bandwidth not supported.\n"); }; - priv->bandwidth = bandwidth; } - if (!change_digital_bandwidth && priv->mode == T_DIGITAL_TV) - return 0; + new_fw.type = type; + new_fw.id = std; + new_fw.std_req = std; + new_fw.scode_table = SCODE | priv->ctrl.scode_table; + new_fw.scode_nr = 0; + + tuner_dbg("checking firmware, user requested type="); + if (debug) { + dump_firm_type(new_fw.type); + printk("(%x), id %016llx, scode_tbl ", new_fw.type, + (unsigned long long)new_fw.std_req); + dump_firm_type(priv->ctrl.scode_table); + printk("(%x), scode_nr %d\n", priv->ctrl.scode_table, + new_fw.scode_nr); + } + + /* No need to reload base firmware if it matches */ + if (((BASE | new_fw.type) & BASE_TYPES) == + (priv->cur_fw.type & BASE_TYPES)) { + tuner_dbg("BASE firmware not changed.\n"); + goto skip_base; + } + + /* Updating BASE - forget about all currently loaded firmware */ + memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); + + /* Reset is needed before loading firmware */ + rc = priv->tuner_callback(priv->video_dev, + XC2028_TUNER_RESET, 0); + if (rc < 0) + goto fail; + + rc = load_firmware(fe, BASE | new_fw.type, &new_fw.id); + if (rc < 0) { + tuner_err("Error %d while loading base firmware\n", + rc); + goto fail; + } /* Load INIT1, if needed */ tuner_dbg("Load init1 firmware, if exists\n"); - type0 = BASE | INIT1; - if (priv->ctrl.type == XC2028_FIRM_MTS) - type0 |= MTS; - /* FIXME: Should handle errors - if INIT1 found */ - rc = load_firmware(fe, type0, &std0); + rc = load_firmware(fe, BASE | INIT1 | new_fw.type, &new_fw.id); + if (rc < 0 && rc != -ENOENT) { + tuner_err("Error %d while loading init1 firmware\n", + rc); + goto fail; + } - /* FIXME: Should add support for FM radio +skip_base: + /* + * No need to reload standard specific firmware if base firmware + * was not reloaded and requested video standards have not changed. */ - - if (priv->ctrl.type == XC2028_FIRM_MTS) - type |= MTS; - - if (priv->firm_type & std) { + if (priv->cur_fw.type == (BASE | new_fw.type) && + priv->cur_fw.std_req == std) { tuner_dbg("Std-specific firmware already loaded.\n"); - return 0; + goto skip_std_specific; } + /* Reloading std-specific firmware forces a SCODE update */ + priv->cur_fw.scode_table = 0; + /* Add audio hack to std mask */ - std |= parse_audio_std_option(); + if (new_mode == T_ANALOG_TV) + new_fw.id |= parse_audio_std_option(); - rc = load_firmware(fe, type, &std); + rc = load_firmware(fe, new_fw.type, &new_fw.id); if (rc < 0) - return rc; + goto fail; + +skip_std_specific: + if (priv->cur_fw.scode_table == new_fw.scode_table && + priv->cur_fw.scode_nr == new_fw.scode_nr) { + tuner_dbg("SCODE firmware already loaded.\n"); + goto check_device; + } /* Load SCODE firmware, if exists */ - tuner_dbg("Trying to load scode 0\n"); - type |= SCODE; + tuner_dbg("Trying to load scode %d\n", new_fw.scode_nr); - rc = load_scode(fe, type, &std, 0); + rc = load_scode(fe, new_fw.type | new_fw.scode_table, + &new_fw.id, new_fw.scode_nr); +check_device: xc2028_get_reg(priv, 0x0004, &version); xc2028_get_reg(priv, 0x0008, &hwmodel); @@ -734,9 +747,23 @@ static int check_firmware(struct dvb_frontend *fe, enum tuner_mode new_mode, hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8, (version & 0xf0) >> 4, version & 0xf); - priv->firm_type = std; + memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw)); + + /* + * By setting BASE in cur_fw.type only after successfully loading all + * firmwares, we can: + * 1. Identify that BASE firmware with type=0 has been loaded; + * 2. Tell whether BASE firmware was just changed the next time through. + */ + priv->cur_fw.type |= BASE; return 0; + +fail: + memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); + if (rc == -ENOENT) + rc = -EINVAL; + return rc; } static int xc2028_signal(struct dvb_frontend *fe, u16 *strength) @@ -785,16 +812,10 @@ static int generic_set_tv_freq(struct dvb_frontend *fe, u32 freq /* in Hz */ , mutex_lock(&priv->lock); /* HACK: It seems that specific firmware need to be reloaded - when freq is changed */ - - priv->firm_type = 0; - - /* Reset GPIO 1 */ - rc = priv->tuner_callback(priv->video_dev, XC2028_TUNER_RESET, 0); - if (rc < 0) - goto ret; + when watching analog TV and freq is changed */ + if (new_mode != T_DIGITAL_TV) + priv->cur_fw.type = 0; - msleep(10); tuner_dbg("should set frequency %d kHz\n", freq / 1000); if (check_firmware(fe, new_mode, std, bandwidth) < 0) @@ -802,7 +823,7 @@ static int generic_set_tv_freq(struct dvb_frontend *fe, u32 freq /* in Hz */ , if (new_mode == T_DIGITAL_TV) { offset = 2750000; - if (priv->bandwidth == BANDWIDTH_7_MHZ) + if (priv->cur_fw.type & DTV7) offset -= 500000; } @@ -994,9 +1015,6 @@ void *xc2028_attach(struct dvb_frontend *fe, struct xc2028_config *cfg) return NULL; } - priv->bandwidth = BANDWIDTH_6_MHZ; - priv->need_load_generic = 1; - priv->mode = T_UNINITIALIZED; priv->i2c_props.addr = cfg->i2c_addr; priv->i2c_props.adap = cfg->i2c_adap; priv->video_dev = video_dev; diff --git a/drivers/media/video/tuner-xc2028.h b/drivers/media/video/tuner-xc2028.h index 4edc4b735c..16259b14ce 100644 --- a/drivers/media/video/tuner-xc2028.h +++ b/drivers/media/video/tuner-xc2028.h @@ -21,6 +21,7 @@ struct xc2028_ctrl { char *fname; int max_len; int d2633:1; + unsigned int scode_table; }; struct xc2028_config { -- 2.39.5