From dc8875e1078961591af4fbf9556c44648bf28d11 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 15 Nov 2007 15:42:30 -0800 Subject: [PATCH] [SCSI] docbook and kernel-doc updates - Change title to remove "Mid-Layer" since the doc is about all of the SCSI layers. - Use "SCSI" instead of "scsi" in docbook text. - Use "*/" to end kernel-doc notation blocks. - A few other minor typo fixes. Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- Documentation/DocBook/scsi.tmpl | 10 ++-- drivers/scsi/scsi.c | 2 +- drivers/scsi/scsi_error.c | 79 +++++++++++++++---------------- drivers/scsi/scsi_transport_srp.c | 3 +- 4 files changed, 45 insertions(+), 49 deletions(-) diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl index 6255930216..f299ab182b 100644 --- a/Documentation/DocBook/scsi.tmpl +++ b/Documentation/DocBook/scsi.tmpl @@ -4,7 +4,7 @@ - SCSI Mid Layer Guide + SCSI Interfaces Guide @@ -92,7 +92,7 @@ The SCSI subsystem uses a three layer design, with upper, mid, and low layers. Every operation involving the SCSI subsystem (such as reading a sector from a disk) uses one driver at each of the 3 levels: one - upper layer driver, one lower layer driver, and the scsi midlayer. + upper layer driver, one lower layer driver, and the SCSI midlayer. The SCSI upper layer provides the interface between userspace and the @@ -154,7 +154,7 @@ drivers/scsi/scsi.c - Main file for the scsi midlayer. + Main file for the SCSI midlayer. !Edrivers/scsi/scsi.c @@ -182,7 +182,7 @@ drivers/scsi/scsi_ioctl.c - Handle ioctl() calls for scsi devices. + Handle ioctl() calls for SCSI devices. !Edrivers/scsi/scsi_ioctl.c @@ -287,7 +287,7 @@ Transport classes - Transport classes are service libraries for drivers in the scsi + Transport classes are service libraries for drivers in the SCSI lower layer, which expose transport attributes in sysfs. diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 412a351c6c..ebc0193808 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -960,7 +960,7 @@ EXPORT_SYMBOL(__starget_for_each_device); * reference. You must hold the host's host_lock over this call and * any access to the returned scsi_device. * - * Note: The only reason why drivers would want to use this is because + * Note: The only reason why drivers should use this is because * they need to access the device list in irq context. Otherwise you * really want to use scsi_device_lookup_by_target instead. **/ diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 22f8140598..169bc59564 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -62,7 +62,7 @@ void scsi_eh_wakeup(struct Scsi_Host *shost) * @shost: SCSI host to invoke error handling on. * * Schedule SCSI EH without scmd. - **/ + */ void scsi_schedule_eh(struct Scsi_Host *shost) { unsigned long flags; @@ -86,7 +86,7 @@ EXPORT_SYMBOL_GPL(scsi_schedule_eh); * * Return value: * 0 on failure. - **/ + */ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) { struct Scsi_Host *shost = scmd->device->host; @@ -121,7 +121,7 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) * This should be turned into an inline function. Each scsi command * has its own timer, and as it is added to the queue, we set up the * timer. When the command completes, we cancel the timer. - **/ + */ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, void (*complete)(struct scsi_cmnd *)) { @@ -155,7 +155,7 @@ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, * Return value: * 1 if we were able to detach the timer. 0 if we blew it, and the * timer function has already started to run. - **/ + */ int scsi_delete_timer(struct scsi_cmnd *scmd) { int rtn; @@ -181,7 +181,7 @@ int scsi_delete_timer(struct scsi_cmnd *scmd) * only in that the normal completion handling might run, but if the * normal completion function determines that the timer has already * fired, then it mustn't do anything. - **/ + */ void scsi_times_out(struct scsi_cmnd *scmd) { enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *); @@ -224,7 +224,7 @@ void scsi_times_out(struct scsi_cmnd *scmd) * * Return value: * 0 when dev was taken offline by error recovery. 1 OK to proceed. - **/ + */ int scsi_block_when_processing_errors(struct scsi_device *sdev) { int online; @@ -245,7 +245,7 @@ EXPORT_SYMBOL(scsi_block_when_processing_errors); * scsi_eh_prt_fail_stats - Log info on failures. * @shost: scsi host being recovered. * @work_q: Queue of scsi cmds to process. - **/ + */ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost, struct list_head *work_q) { @@ -295,7 +295,7 @@ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost, * Notes: * When a deferred error is detected the current command has * not been executed and needs retrying. - **/ + */ static int scsi_check_sense(struct scsi_cmnd *scmd) { struct scsi_sense_hdr sshdr; @@ -398,7 +398,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) * queued during error recovery. the main difference here is that we * don't allow for the possibility of retries here, and we are a lot * more restrictive about what we consider acceptable. - **/ + */ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) { /* @@ -452,7 +452,7 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) /** * scsi_eh_done - Completion function for error handling. * @scmd: Cmd that is done. - **/ + */ static void scsi_eh_done(struct scsi_cmnd *scmd) { struct completion *eh_action; @@ -469,7 +469,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) /** * scsi_try_host_reset - ask host adapter to reset itself * @scmd: SCSI cmd to send hsot reset. - **/ + */ static int scsi_try_host_reset(struct scsi_cmnd *scmd) { unsigned long flags; @@ -498,7 +498,7 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd) /** * scsi_try_bus_reset - ask host to perform a bus reset * @scmd: SCSI cmd to send bus reset. - **/ + */ static int scsi_try_bus_reset(struct scsi_cmnd *scmd) { unsigned long flags; @@ -533,7 +533,7 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd) * unreliable for a given host, then the host itself needs to put a * timer on it, and set the host back to a consistent state prior to * returning. - **/ + */ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) { int rtn; @@ -568,7 +568,7 @@ static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) * author of the low-level driver wishes this operation to be timed, * they can provide this facility themselves. helper functions in * scsi_error.c can be supplied to make this easier to do. - **/ + */ static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) { /* @@ -601,7 +601,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) * sent must be one that does not transfer any data. If @sense_bytes != 0 * @cmnd is ignored and this functions sets up a REQUEST_SENSE command * and cmnd buffers to read @sense_bytes into @scmd->sense_buffer. - **/ + */ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, unsigned char *cmnd, int cmnd_size, unsigned sense_bytes) { @@ -667,7 +667,7 @@ EXPORT_SYMBOL(scsi_eh_prep_cmnd); * @ses: saved information from a coresponding call to scsi_prep_eh_cmnd * * Undo any damage done by above scsi_prep_eh_cmnd(). - **/ + */ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses) { /* @@ -697,7 +697,7 @@ EXPORT_SYMBOL(scsi_eh_restore_cmnd); * * Return value: * SUCCESS or FAILED or NEEDS_RETRY - **/ + */ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, int cmnd_size, int timeout, unsigned sense_bytes) { @@ -765,7 +765,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, * Some hosts automatically obtain this information, others require * that we obtain it on our own. This function will *not* return until * the command either times out, or it completes. - **/ + */ static int scsi_request_sense(struct scsi_cmnd *scmd) { return scsi_send_eh_cmnd(scmd, NULL, 0, SENSE_TIMEOUT, ~0); @@ -782,7 +782,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) * and that would disturb what we are doing. Thus we really want to * keep a list of pending commands for final completion, and once we * are ready to leave error handling we handle completion for real. - **/ + */ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { scmd->device->host->host_failed--; @@ -810,7 +810,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); * * XXX: Long term this code should go away, but that needs an audit of * all LLDDs first. - **/ + */ int scsi_eh_get_sense(struct list_head *work_q, struct list_head *done_q) { @@ -862,7 +862,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_get_sense); * * Return value: * 0 - Device is ready. 1 - Device NOT ready. - **/ + */ static int scsi_eh_tur(struct scsi_cmnd *scmd) { static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0}; @@ -897,7 +897,7 @@ retry_tur: * command that has timed out. If the command simply failed, it makes * no sense to try and abort the command, since as far as the shost * adapter is concerned, it isn't running. - **/ + */ static int scsi_eh_abort_cmds(struct list_head *work_q, struct list_head *done_q) { @@ -935,7 +935,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, * * Return value: * 0 - Device is ready. 1 - Device NOT ready. - **/ + */ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) { static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0}; @@ -963,7 +963,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) * Notes: * If commands are failing due to not ready, initializing command required, * try revalidating the device, which will end up sending a start unit. - **/ + */ static int scsi_eh_stu(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1017,7 +1017,7 @@ static int scsi_eh_stu(struct Scsi_Host *shost, * devices that are jammed or not - if we have multiple devices, it * makes no sense to try bus_device_reset - we really would need to try * a bus_reset instead. - **/ + */ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1068,7 +1068,7 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, * @shost: &scsi host being recovered. * @work_q: &list_head for pending commands. * @done_q: &list_head for processed commands. - **/ + */ static int scsi_eh_bus_reset(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1125,7 +1125,7 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, * scsi_eh_host_reset - send a host reset * @work_q: list_head for processed commands. * @done_q: list_head for processed commands. - **/ + */ static int scsi_eh_host_reset(struct list_head *work_q, struct list_head *done_q) { @@ -1160,8 +1160,7 @@ static int scsi_eh_host_reset(struct list_head *work_q, * scsi_eh_offline_sdevs - offline scsi devices that fail to recover * @work_q: list_head for processed commands. * @done_q: list_head for processed commands. - * - **/ + */ static void scsi_eh_offline_sdevs(struct list_head *work_q, struct list_head *done_q) { @@ -1194,7 +1193,7 @@ static void scsi_eh_offline_sdevs(struct list_head *work_q, * is woken. In cases where the error code indicates an error that * doesn't require the error handler read (i.e. we don't need to * abort/reset), this function should return SUCCESS. - **/ + */ int scsi_decide_disposition(struct scsi_cmnd *scmd) { int rtn; @@ -1375,7 +1374,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * * If scsi_allocate_request() fails for what ever reason, we * completely forget to lock the door. - **/ + */ static void scsi_eh_lock_door(struct scsi_device *sdev) { unsigned char cmnd[MAX_COMMAND_SIZE]; @@ -1399,7 +1398,7 @@ static void scsi_eh_lock_door(struct scsi_device *sdev) * Notes: * When we entered the error handler, we blocked all further i/o to * this device. we need to 'reverse' this process. - **/ + */ static void scsi_restart_operations(struct Scsi_Host *shost) { struct scsi_device *sdev; @@ -1445,8 +1444,7 @@ static void scsi_restart_operations(struct Scsi_Host *shost) * @shost: host to be recovered. * @work_q: &list_head for pending commands. * @done_q: &list_head for processed commands. - * - **/ + */ void scsi_eh_ready_devs(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1462,8 +1460,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_ready_devs); /** * scsi_eh_flush_done_q - finish processed commands or retry them. * @done_q: list_head of processed commands. - * - **/ + */ void scsi_eh_flush_done_q(struct list_head *done_q) { struct scsi_cmnd *scmd, *next; @@ -1517,7 +1514,7 @@ EXPORT_SYMBOL(scsi_eh_flush_done_q); * scsi_finish_cmd() called for it. we do all of the retry stuff * here, so when we restart the host after we return it should have an * empty queue. - **/ + */ static void scsi_unjam_host(struct Scsi_Host *shost) { unsigned long flags; @@ -1544,7 +1541,7 @@ static void scsi_unjam_host(struct Scsi_Host *shost) * Notes: * This is the main error handling loop. This is run as a kernel thread * for every SCSI host and handles all error handling activity. - **/ + */ int scsi_error_handler(void *data) { struct Scsi_Host *shost = data; @@ -1773,7 +1770,7 @@ EXPORT_SYMBOL(scsi_reset_provider); * * Return value: * 1 if valid sense data information found, else 0; - **/ + */ int scsi_normalize_sense(const u8 *sense_buffer, int sb_len, struct scsi_sense_hdr *sshdr) { @@ -1839,7 +1836,7 @@ EXPORT_SYMBOL(scsi_command_normalize_sense); * * Return value: * pointer to start of (first) descriptor if found else NULL - **/ + */ const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len, int desc_type) { @@ -1875,7 +1872,7 @@ EXPORT_SYMBOL(scsi_sense_desc_find); * * Return value: * 1 if information field found, 0 if not found. - **/ + */ int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len, u64 * info_out) { diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c index 739e327bba..2445c98ae9 100644 --- a/drivers/scsi/scsi_transport_srp.c +++ b/drivers/scsi/scsi_transport_srp.c @@ -185,11 +185,10 @@ static int srp_host_match(struct attribute_container *cont, struct device *dev) /** * srp_rport_add - add a SRP remote port to the device hierarchy - * * @shost: scsi host the remote port is connected to. * @ids: The port id for the remote port. * - * publishes a port to the rest of the system + * Publishes a port to the rest of the system. */ struct srp_rport *srp_rport_add(struct Scsi_Host *shost, struct srp_rport_identifiers *ids) -- 2.39.5