From d782f33df706f1b8a4496b41fd7d339c6e23aa59 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 8 Jun 2006 17:59:31 +0100 Subject: [PATCH] [ARM] Fix Neponset IRQ handling While testing the genirq code on ARM, a condition was found whereby the Neponset IRQ handler was being re-entered, causing the system to deadlock. Under the ARM IRQ code, this would not have been a visible problem because the "simple" IRQ handling had no re-entrancy protection. Resolve this by acknowledging the parent interrupt after we mask it when we are going to handle one of our "special" level-based sources (from ethernet or USAR chip.) Signed-off-by: Russell King --- arch/arm/mach-sa1100/neponset.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 9e02bc3712..af6d2775cf 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -59,6 +59,14 @@ neponset_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg if (irr & (IRR_ETHERNET | IRR_USAR)) { desc->chip->mask(irq); + /* + * Ack the interrupt now to prevent re-entering + * this neponset handler. Again, this is safe + * since we'll check the IRR register prior to + * leaving. + */ + desc->chip->ack(irq); + if (irr & IRR_ETHERNET) { d = irq_desc + IRQ_NEPONSET_SMC9196; desc_handle_irq(IRQ_NEPONSET_SMC9196, d, regs); -- 2.39.5