From d6a61bfc06d6f2248f3e75f208d64e794082013c Mon Sep 17 00:00:00 2001 From: Luis Machado Date: Thu, 24 Jul 2008 02:10:41 +1000 Subject: [PATCH] powerpc: BookE hardware watchpoint support This patch implements support for HW based watchpoint via the DBSR_DAC (Data Address Compare) facility of the BookE processors. It does so by interfacing with the existing DABR breakpoint code and adding the necessary bits and pieces for the new bits to be properly set or cleared Signed-off-by: Luis Machado Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 6 +-- arch/powerpc/kernel/process.c | 46 ++++++++++++++++++++++ arch/powerpc/kernel/ptrace.c | 72 +++++++++++++++++++++++++++++++--- arch/powerpc/kernel/signal.c | 6 ++- arch/powerpc/kernel/traps.c | 16 ++++++++ arch/powerpc/mm/fault.c | 25 ------------ include/asm-powerpc/system.h | 2 + 7 files changed, 138 insertions(+), 35 deletions(-) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index da52269aec..81c8324a4a 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -148,7 +148,7 @@ transfer_to_handler: /* Check to see if the dbcr0 register is set up to debug. Use the internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,DBCR0_IDM@h + andis. r12,r12,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -292,7 +292,7 @@ syscall_exit_cont: /* If the process has its own DBCR0 value, load it up. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,DBCR0_IDM@h + andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h bnel- load_dbcr0 #endif #ifdef CONFIG_44x @@ -720,7 +720,7 @@ restore_user: /* Check whether this process has its own DBCR0 value. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,DBCR0_IDM@h + andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h bnel- load_dbcr0 #endif diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 219f363411..db2497ccc1 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -47,6 +47,8 @@ #ifdef CONFIG_PPC64 #include #endif +#include +#include extern unsigned long _get_SP(void); @@ -239,6 +241,35 @@ void discard_lazy_cpu_state(void) } #endif /* CONFIG_SMP */ +void do_dabr(struct pt_regs *regs, unsigned long address, + unsigned long error_code) +{ + siginfo_t info; + + if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, + 11, SIGSEGV) == NOTIFY_STOP) + return; + + if (debugger_dabr_match(regs)) + return; + + /* Clear the DAC and struct entries. One shot trigger */ +#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE)) + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W + | DBCR0_IDM)); +#endif + + /* Clear the DABR */ + set_dabr(0); + + /* Deliver the signal to userspace */ + info.si_signo = SIGTRAP; + info.si_errno = 0; + info.si_code = TRAP_HWBKPT; + info.si_addr = (void __user *)address; + force_sig_info(SIGTRAP, &info, current); +} + static DEFINE_PER_CPU(unsigned long, current_dabr); int set_dabr(unsigned long dabr) @@ -254,6 +285,11 @@ int set_dabr(unsigned long dabr) #if defined(CONFIG_PPC64) || defined(CONFIG_6xx) mtspr(SPRN_DABR, dabr); #endif + +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + mtspr(SPRN_DAC1, dabr); +#endif + return 0; } @@ -337,6 +373,12 @@ struct task_struct *__switch_to(struct task_struct *prev, if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + /* If new thread DAC (HW breakpoint) is the same then leave it */ + if (new->thread.dabr) + set_dabr(new->thread.dabr); +#endif + new_thread = &new->thread; old_thread = ¤t->thread; @@ -525,6 +567,10 @@ void flush_thread(void) if (current->thread.dabr) { current->thread.dabr = 0; set_dabr(0); + +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W); +#endif } } diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 8feb93e789..a5d0e78779 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -703,7 +703,7 @@ void user_enable_single_step(struct task_struct *task) if (regs != NULL) { #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) - task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC; + task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; regs->msr |= MSR_DE; #else regs->msr |= MSR_SE; @@ -716,9 +716,16 @@ void user_disable_single_step(struct task_struct *task) { struct pt_regs *regs = task->thread.regs; + +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + /* If DAC then do not single step, skip */ + if (task->thread.dabr) + return; +#endif + if (regs != NULL) { #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) - task->thread.dbcr0 = 0; + task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM); regs->msr &= ~MSR_DE; #else regs->msr &= ~MSR_SE; @@ -727,22 +734,75 @@ void user_disable_single_step(struct task_struct *task) clear_tsk_thread_flag(task, TIF_SINGLESTEP); } -static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, +int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data) { - /* We only support one DABR and no IABRS at the moment */ + /* For ppc64 we support one DABR and no IABR's at the moment (ppc64). + * For embedded processors we support one DAC and no IAC's at the + * moment. + */ if (addr > 0) return -EINVAL; - /* The bottom 3 bits are flags */ if ((data & ~0x7UL) >= TASK_SIZE) return -EIO; - /* Ensure translation is on */ +#ifdef CONFIG_PPC64 + + /* For processors using DABR (i.e. 970), the bottom 3 bits are flags. + * It was assumed, on previous implementations, that 3 bits were + * passed together with the data address, fitting the design of the + * DABR register, as follows: + * + * bit 0: Read flag + * bit 1: Write flag + * bit 2: Breakpoint translation + * + * Thus, we use them here as so. + */ + + /* Ensure breakpoint translation bit is set */ if (data && !(data & DABR_TRANSLATION)) return -EIO; + /* Move contents to the DABR register */ task->thread.dabr = data; + +#endif +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + + /* As described above, it was assumed 3 bits were passed with the data + * address, but we will assume only the mode bits will be passed + * as to not cause alignment restrictions for DAC-based processors. + */ + + /* DAC's hold the whole address without any mode flags */ + task->thread.dabr = data & ~0x3UL; + + if (task->thread.dabr == 0) { + task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM); + task->thread.regs->msr &= ~MSR_DE; + return 0; + } + + /* Read or Write bits must be set */ + + if (!(data & 0x3UL)) + return -EINVAL; + + /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 + register */ + task->thread.dbcr0 = DBCR0_IDM; + + /* Check for write and read flags and set DBCR0 + accordingly */ + if (data & 0x1UL) + task->thread.dbcr0 |= DBSR_DAC1R; + if (data & 0x2UL) + task->thread.dbcr0 |= DBSR_DAC1W; + + task->thread.regs->msr |= MSR_DE; +#endif return 0; } diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index ad55488939..7aada783ec 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -145,8 +145,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) * user space. The DABR will have been cleared if it * triggered inside the kernel. */ - if (current->thread.dabr) + if (current->thread.dabr) { set_dabr(current->thread.dabr); +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + mtspr(SPRN_DBCR0, current->thread.dbcr0); +#endif + } if (is32) { if (ka.sa.sa_flags & SA_SIGINFO) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 878fbddb6a..81ccb8dd1a 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -1067,6 +1067,22 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) } _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); + } else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) { + regs->msr &= ~MSR_DE; + + if (user_mode(regs)) { + current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | + DBCR0_IDM); + } else { + /* Disable DAC interupts */ + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | + DBSR_DAC1W | DBCR0_IDM)); + + /* Clear the DAC event */ + mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W)); + } + /* Setup and send the trap to the handler */ + do_dabr(regs, mfspr(SPRN_DAC1), debug_status); } } #endif /* CONFIG_4xx || CONFIG_BOOKE */ diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 1707d00331..565b7a237c 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -100,31 +100,6 @@ static int store_updates_sp(struct pt_regs *regs) return 0; } -#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) -static void do_dabr(struct pt_regs *regs, unsigned long address, - unsigned long error_code) -{ - siginfo_t info; - - if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, - 11, SIGSEGV) == NOTIFY_STOP) - return; - - if (debugger_dabr_match(regs)) - return; - - /* Clear the DABR */ - set_dabr(0); - - /* Deliver the signal to userspace */ - info.si_signo = SIGTRAP; - info.si_errno = 0; - info.si_code = TRAP_HWBKPT; - info.si_addr = (void __user *)address; - force_sig_info(SIGTRAP, &info, current); -} -#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/ - /* * For 600- and 800-family processors, the error_code parameter is DSISR * for a data fault, SRR1 for an instruction fault. For 400-family processors diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index e6e25e2364..d6648c1433 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -110,6 +110,8 @@ static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } #endif extern int set_dabr(unsigned long dabr); +extern void do_dabr(struct pt_regs *regs, unsigned long address, + unsigned long error_code); extern void print_backtrace(unsigned long *); extern void show_regs(struct pt_regs * regs); extern void flush_instruction_cache(void); -- 2.39.5