From d46e144b65bf053b25d134ec9f52a38e63e04bb4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 20 Feb 2008 23:59:33 +0100 Subject: [PATCH] mac80211: rework TX filtered frame code This reworks the code for TX filtered frames, splitting it out to a new function to handle those cases, making the clear instruction a flag and renaming a few things to be easier to understand and less Atheros hardware specific. Finally, it also makes the comments explain more. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 3 +- net/mac80211/ieee80211.c | 121 +++++++++++++++++++++++++-------------- net/mac80211/sta_info.h | 6 +- net/mac80211/tx.c | 12 ++-- 4 files changed, 91 insertions(+), 51 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 784ab769b0..cd4b1c1a0d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -228,7 +228,8 @@ struct ieee80211_tx_control { #define IEEE80211_TXCTL_NO_ACK (1<<4) /* tell the low level not to * wait for an ack */ #define IEEE80211_TXCTL_RATE_CTRL_PROBE (1<<5) -#define IEEE80211_TXCTL_CLEAR_DST_MASK (1<<6) +#define IEEE80211_TXCTL_CLEAR_PS_FILT (1<<6) /* clear powersave filter + * for destination station */ #define IEEE80211_TXCTL_REQUEUE (1<<7) #define IEEE80211_TXCTL_FIRST_FRAGMENT (1<<8) /* this is a first fragment of * the frame */ diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 7df14799e3..a00858dbab 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -1178,6 +1178,77 @@ no_key: } } +static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, + struct sta_info *sta, + struct sk_buff *skb, + struct ieee80211_tx_status *status) +{ + sta->tx_filtered_count++; + + /* + * Clear the TX filter mask for this STA when sending the next + * packet. If the STA went to power save mode, this will happen + * happen when it wakes up for the next time. + */ + sta->flags |= WLAN_STA_CLEAR_PS_FILT; + + /* + * This code races in the following way: + * + * (1) STA sends frame indicating it will go to sleep and does so + * (2) hardware/firmware adds STA to filter list, passes frame up + * (3) hardware/firmware processes TX fifo and suppresses a frame + * (4) we get TX status before having processed the frame and + * knowing that the STA has gone to sleep. + * + * This is actually quite unlikely even when both those events are + * processed from interrupts coming in quickly after one another or + * even at the same time because we queue both TX status events and + * RX frames to be processed by a tasklet and process them in the + * same order that they were received or TX status last. Hence, there + * is no race as long as the frame RX is processed before the next TX + * status, which drivers can ensure, see below. + * + * Note that this can only happen if the hardware or firmware can + * actually add STAs to the filter list, if this is done by the + * driver in response to set_tim() (which will only reduce the race + * this whole filtering tries to solve, not completely solve it) + * this situation cannot happen. + * + * To completely solve this race drivers need to make sure that they + * (a) don't mix the irq-safe/not irq-safe TX status/RX processing + * functions and + * (b) always process RX events before TX status events if ordering + * can be unknown, for example with different interrupt status + * bits. + */ + if (sta->flags & WLAN_STA_PS && + skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) { + ieee80211_remove_tx_extra(local, sta->key, skb, + &status->control); + skb_queue_tail(&sta->tx_filtered, skb); + return; + } + + if (!(sta->flags & WLAN_STA_PS) && + !(status->control.flags & IEEE80211_TXCTL_REQUEUE)) { + /* Software retry the packet once */ + status->control.flags |= IEEE80211_TXCTL_REQUEUE; + ieee80211_remove_tx_extra(local, sta->key, skb, + &status->control); + dev_queue_xmit(skb); + return; + } + + if (net_ratelimit()) + printk(KERN_DEBUG "%s: dropped TX filtered frame, " + "queue_len=%d PS=%d @%lu\n", + wiphy_name(local->hw.wiphy), + skb_queue_len(&sta->tx_filtered), + !!(sta->flags & WLAN_STA_PS), jiffies); + dev_kfree_skb(skb); +} + void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_status *status) { @@ -1202,11 +1273,16 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, sta = sta_info_get(local, hdr->addr1); if (sta) { if (sta->flags & WLAN_STA_PS) { - /* The STA is in power save mode, so assume + /* + * The STA is in power save mode, so assume * that this TX packet failed because of that. */ status->excessive_retries = 0; status->flags |= IEEE80211_TX_STATUS_TX_FILTERED; + ieee80211_handle_filtered_frame(local, sta, + skb, status); + sta_info_put(sta); + return; } sta_info_put(sta); } @@ -1216,47 +1292,8 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, struct sta_info *sta; sta = sta_info_get(local, hdr->addr1); if (sta) { - sta->tx_filtered_count++; - - /* Clear the TX filter mask for this STA when sending - * the next packet. If the STA went to power save mode, - * this will happen when it is waking up for the next - * time. */ - sta->clear_dst_mask = 1; - - /* TODO: Is the WLAN_STA_PS flag always set here or is - * the race between RX and TX status causing some - * packets to be filtered out before 80211.o gets an - * update for PS status? This seems to be the case, so - * no changes are likely to be needed. */ - if (sta->flags & WLAN_STA_PS && - skb_queue_len(&sta->tx_filtered) < - STA_MAX_TX_BUFFER) { - ieee80211_remove_tx_extra(local, sta->key, - skb, - &status->control); - skb_queue_tail(&sta->tx_filtered, skb); - } else if (!(sta->flags & WLAN_STA_PS) && - !(status->control.flags & IEEE80211_TXCTL_REQUEUE)) { - /* Software retry the packet once */ - status->control.flags |= IEEE80211_TXCTL_REQUEUE; - ieee80211_remove_tx_extra(local, sta->key, - skb, - &status->control); - dev_queue_xmit(skb); - } else { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: dropped TX " - "filtered frame queue_len=%d " - "PS=%d @%lu\n", - wiphy_name(local->hw.wiphy), - skb_queue_len( - &sta->tx_filtered), - !!(sta->flags & WLAN_STA_PS), - jiffies); - } - dev_kfree_skb(skb); - } + ieee80211_handle_filtered_frame(local, sta, skb, + status); sta_info_put(sta); return; } diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 4099ece143..f7e65fa3f9 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -32,6 +32,9 @@ * @WLAN_STA_WME: Station is a QoS-STA. * @WLAN_STA_WDS: Station is one of our WDS peers. * @WLAN_STA_PSPOLL: Station has just PS-polled us. + * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the + * IEEE80211_TXCTL_CLEAR_PS_FILT control flag) when the next + * frame to this station is transmitted. */ enum ieee80211_sta_info_flags { WLAN_STA_AUTH = 1<<0, @@ -43,6 +46,7 @@ enum ieee80211_sta_info_flags { WLAN_STA_WME = 1<<6, WLAN_STA_WDS = 1<<7, WLAN_STA_PSPOLL = 1<<8, + WLAN_STA_CLEAR_PS_FILT = 1<<9, }; #define STA_TID_NUM 16 @@ -136,8 +140,6 @@ struct sta_info { struct sk_buff_head tx_filtered; /* buffer of TX frames that were * already given to low-level driver, * but were filtered */ - int clear_dst_mask; - unsigned long rx_packets, tx_packets; /* number of RX/TX MSDUs */ unsigned long rx_bytes, tx_bytes; unsigned long tx_retry_failed, tx_retry_count; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 69fdb763aa..1cd58e01f1 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1020,10 +1020,10 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx, } if (!tx->sta) - control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; - else if (tx->sta->clear_dst_mask) { - control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; - tx->sta->clear_dst_mask = 0; + control->flags |= IEEE80211_TXCTL_CLEAR_PS_FILT; + else if (tx->sta->flags & WLAN_STA_CLEAR_PS_FILT) { + control->flags |= IEEE80211_TXCTL_CLEAR_PS_FILT; + tx->sta->flags &= ~WLAN_STA_CLEAR_PS_FILT; } hdrlen = ieee80211_get_hdrlen(tx->fc); @@ -1084,7 +1084,7 @@ static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb, if (tx->u.tx.extra_frag) { control->flags &= ~(IEEE80211_TXCTL_USE_RTS_CTS | IEEE80211_TXCTL_USE_CTS_PROTECT | - IEEE80211_TXCTL_CLEAR_DST_MASK | + IEEE80211_TXCTL_CLEAR_PS_FILT | IEEE80211_TXCTL_FIRST_FRAGMENT); for (i = 0; i < tx->u.tx.num_extra_frag; i++) { if (!tx->u.tx.extra_frag[i]) @@ -1806,7 +1806,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, control->antenna_sel_tx = local->hw.conf.antenna_sel_tx; control->flags |= IEEE80211_TXCTL_NO_ACK; control->retry_limit = 1; - control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK; + control->flags |= IEEE80211_TXCTL_CLEAR_PS_FILT; } ap->num_beacons++; -- 2.39.5