From d39398a333ddc490f842ccdd4b76c9674682aa5d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 26 Feb 2008 11:04:17 -0800 Subject: [PATCH] x86: seperate mmconf for fam10h out from setup_64.c Separate mmconf for fam10h out from setup_64.c Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 2 + arch/x86/kernel/mmconf-fam10h_64.c | 215 ++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 216 ++--------------------------- 3 files changed, 226 insertions(+), 207 deletions(-) create mode 100644 arch/x86/kernel/mmconf-fam10h_64.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 90e092d0af..815b650977 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -99,4 +99,6 @@ ifeq ($(CONFIG_X86_64),y) obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o + + obj-$(CONFIG_PCI_MMCONFIG) += mmconf-fam10h_64.o endif diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c new file mode 100644 index 0000000000..37897920ec --- /dev/null +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -0,0 +1,215 @@ +/* + * AMD Family 10h mmconfig enablement + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct pci_hostbridge_probe { + u32 bus; + u32 slot; + u32 vendor; + u32 device; +}; + +static u64 __cpuinitdata fam10h_pci_mmconf_base; +static int __cpuinitdata fam10h_pci_mmconf_base_status; + +static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = { + { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, + { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, +}; + +struct range { + u64 start; + u64 end; +}; + +static int __cpuinit cmp_range(const void *x1, const void *x2) +{ + const struct range *r1 = x1; + const struct range *r2 = x2; + int start1, start2; + + start1 = r1->start >> 32; + start2 = r2->start >> 32; + + return start1 - start2; +} + +/*[47:0] */ +/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */ +#define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32) +#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32))) +static void __cpuinit get_fam10h_pci_mmconf_base(void) +{ + int i; + unsigned bus; + unsigned slot; + int found; + + u64 val; + u32 address; + u64 tom2; + u64 base = FAM10H_PCI_MMCONF_BASE; + + int hi_mmio_num; + struct range range[8]; + + /* only try to get setting from BSP */ + /* -1 or 1 */ + if (fam10h_pci_mmconf_base_status) + return; + + if (!early_pci_allowed()) + goto fail; + + found = 0; + for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { + u32 id; + u16 device; + u16 vendor; + + bus = pci_probes[i].bus; + slot = pci_probes[i].slot; + id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); + + vendor = id & 0xffff; + device = (id>>16) & 0xffff; + if (pci_probes[i].vendor == vendor && + pci_probes[i].device == device) { + found = 1; + break; + } + } + + if (!found) + goto fail; + + /* SYS_CFG */ + address = MSR_K8_SYSCFG; + rdmsrl(address, val); + + /* TOP_MEM2 is not enabled? */ + if (!(val & (1<<21))) { + tom2 = 0; + } else { + /* TOP_MEM2 */ + address = MSR_K8_TOP_MEM2; + rdmsrl(address, val); + tom2 = val & (0xffffULL<<32); + } + + if (base <= tom2) + base = tom2 + (1ULL<<32); + + /* + * need to check if the range is in the high mmio range that is + * above 4G + */ + hi_mmio_num = 0; + for (i = 0; i < 8; i++) { + u32 reg; + u64 start; + u64 end; + reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); + if (!(reg & 3)) + continue; + + start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); + end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + + if (!end) + continue; + + range[hi_mmio_num].start = start; + range[hi_mmio_num].end = end; + hi_mmio_num++; + } + + if (!hi_mmio_num) + goto out; + + /* sort the range */ + sort(range, hi_mmio_num, sizeof(struct range), cmp_range, NULL); + + if (range[hi_mmio_num - 1].end < base) + goto out; + if (range[0].start > base) + goto out; + + /* need to find one window */ + base = range[0].start - (1ULL << 32); + if ((base > tom2) && BASE_VALID(base)) + goto out; + base = range[hi_mmio_num - 1].end + (1ULL << 32); + if ((base > tom2) && BASE_VALID(base)) + goto out; + /* need to find window between ranges */ + if (hi_mmio_num > 1) + for (i = 0; i < hi_mmio_num - 1; i++) { + if (range[i + 1].start > (range[i].end + (1ULL << 32))) { + base = range[i].end + (1ULL << 32); + if ((base > tom2) && BASE_VALID(base)) + goto out; + } + } + +fail: + fam10h_pci_mmconf_base_status = -1; + return; +out: + fam10h_pci_mmconf_base = base; + fam10h_pci_mmconf_base_status = 1; +} + +void __cpuinit fam10h_check_enable_mmcfg(void) +{ + u64 val; + u32 address; + + address = MSR_FAM10H_MMIO_CONF_BASE; + rdmsrl(address, val); + + /* try to make sure that AP's setting is identical to BSP setting */ + if (val & FAM10H_MMIO_CONF_ENABLE) { + unsigned busnbits; + busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & + FAM10H_MMIO_CONF_BUSRANGE_MASK; + + /* only trust the one handle 256 buses, if acpi=off */ + if (!acpi_pci_disabled || busnbits >= 8) { + u64 base; + base = val & (0xffffULL << 32); + if (fam10h_pci_mmconf_base_status <= 0) { + fam10h_pci_mmconf_base = base; + fam10h_pci_mmconf_base_status = 1; + return; + } else if (fam10h_pci_mmconf_base == base) + return; + } + } + + /* + * if it is not enabled, try to enable it and assume only one segment + * with 256 buses + */ + get_fam10h_pci_mmconf_base(); + if (fam10h_pci_mmconf_base_status <= 0) + return; + + printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); + val &= ~((FAM10H_MMIO_CONF_BASE_MASK<start >> 32; - start2 = r2->start >> 32; - - return start1 - start2; -} - -/*[47:0] */ -/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */ -#define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32) -#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32))) -static void __cpuinit get_fam10h_pci_mmconf_base(void) -{ - int i; - unsigned bus; - unsigned slot; - int found; - - u64 val; - u32 address; - u64 tom2; - u64 base = FAM10H_PCI_MMCONF_BASE; - - int hi_mmio_num; - struct range range[8]; - - /* only try to get setting from BSP */ - /* -1 or 1 */ - if (fam10h_pci_mmconf_base_status) - return; - - if (!early_pci_allowed()) - goto fail; - - found = 0; - for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { - u32 id; - u16 device; - u16 vendor; - - bus = pci_probes[i].bus; - slot = pci_probes[i].slot; - id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); - - vendor = id & 0xffff; - device = (id>>16) & 0xffff; - if (pci_probes[i].vendor == vendor && - pci_probes[i].device == device) { - found = 1; - break; - } - } - - if (!found) - goto fail; - - /* SYS_CFG */ - address = MSR_K8_SYSCFG; - rdmsrl(address, val); - - /* TOP_MEM2 is not enabled? */ - if (!(val & (1<<21))) { - tom2 = 0; - } else { - /* TOP_MEM2 */ - address = MSR_K8_TOP_MEM2; - rdmsrl(address, val); - tom2 = val & (0xffffULL<<32); - } - - if (base <= tom2) - base = tom2 + (1ULL<<32); - - /* - * need to check if the range is in the high mmio range that is - * above 4G - */ - hi_mmio_num = 0; - for (i = 0; i < 8; i++) { - u32 reg; - u64 start; - u64 end; - reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); - if (!(reg & 3)) - continue; - - start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ - reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); - end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ - - if (!end) - continue; - - range[hi_mmio_num].start = start; - range[hi_mmio_num].end = end; - hi_mmio_num++; - } - - if (!hi_mmio_num) - goto out; - - /* sort the range */ - sort(range, hi_mmio_num, sizeof(struct range), cmp_range, NULL); - - if (range[hi_mmio_num - 1].end < base) - goto out; - if (range[0].start > base) - goto out; - - /* need to find one window */ - base = range[0].start - (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) - goto out; - base = range[hi_mmio_num - 1].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) - goto out; - /* need to find window between ranges */ - if (hi_mmio_num > 1) - for (i = 0; i < hi_mmio_num - 1; i++) { - if (range[i + 1].start > (range[i].end + (1ULL << 32))) { - base = range[i].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) - goto out; - } - } - -fail: - fam10h_pci_mmconf_base_status = -1; - return; -out: - fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; -} -#endif - -static void __cpuinit fam10h_check_enable_mmcfg(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_PCI_MMCONFIG - u64 val; - u32 address; - - address = MSR_FAM10H_MMIO_CONF_BASE; - rdmsrl(address, val); - - /* try to make sure that AP's setting is identical to BSP setting */ - if (val & FAM10H_MMIO_CONF_ENABLE) { - unsigned busnbits; - busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & - FAM10H_MMIO_CONF_BUSRANGE_MASK; - - /* only trust the one handle 256 buses, if acpi=off */ - if (!acpi_pci_disabled || busnbits >= 8) { - u64 base; - base = val & (0xffffULL << 32); - if (fam10h_pci_mmconf_base_status <= 0) { - fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; - return; - } else if (fam10h_pci_mmconf_base == base) - return; - } - } - - /* - * if it is not enabled, try to enable it and assume only one segment - * with 256 buses - */ - get_fam10h_pci_mmconf_base(); - if (fam10h_pci_mmconf_base_status <= 0) - return; - - printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); - val &= ~((FAM10H_MMIO_CONF_BASE_MASK<x86 == 0x10) - fam10h_check_enable_mmcfg(c); + fam10h_check_enable_mmcfg(); if (amd_apic_timer_broken()) disable_apic_timer = 1; -- 2.39.5