From d237bf49261ed812a17f7123fea9b80ef673ca0f Mon Sep 17 00:00:00 2001 From: Thibaut VARENE Date: Fri, 3 Feb 2006 03:03:48 -0800 Subject: [PATCH] [PATCH] ide: restore support for AEC6280M cards in aec62xx.c This patch adds missing initialization sequence, necessary to get the "Macintosh" version of AEC6280 cards to work in Linux. Without this patch, the driver hangs for several minutes trying to initialize the card and the kernel is left in an unstable state. This patch has been tested fine on ppc and i386. Signed-off-by: Thibaut VARENE Acked-by: Bartlomiej Zolnierkiewicz Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ide/pci/aec62xx.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index a21b1e11ee..c743e68c33 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -262,6 +262,21 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch else pci_set_drvdata(dev, (void *) aec6xxx_34_base); + /* These are necessary to get AEC6280 Macintosh cards to work */ + if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) || + (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) { + u8 reg49h = 0, reg4ah = 0; + /* Clear reset and test bits. */ + pci_read_config_byte(dev, 0x49, ®49h); + pci_write_config_byte(dev, 0x49, reg49h & ~0x30); + /* Enable chip interrupt output. */ + pci_read_config_byte(dev, 0x4a, ®4ah); + pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01); + /* Enable burst mode. */ + pci_read_config_byte(dev, 0x4a, ®4ah); + pci_write_config_byte(dev, 0x4a, reg4ah | 0x80); + } + return dev->irq; } -- 2.39.5