From ccc4672aff1861a9c80ed9e8ec11dc304b31d307 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2006 18:28:14 +0900 Subject: [PATCH] [PATCH] ata_piix: convert ata_piix to new probing mechanism Convert ata_piix to new probing mechanism. Automatic hotplug is not supported due to hardware limitation (no PHY event interrupt), but warm plugging works. Signed-off-by: Tejun Heo --- drivers/scsi/ata_piix.c | 87 +++++++++++++++-------------------------- 1 file changed, 32 insertions(+), 55 deletions(-) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 54c2e52373..521b718763 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -146,11 +146,10 @@ struct piix_map_db { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); - -static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes); -static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static void piix_pata_error_handler(struct ata_port *ap); +static void piix_sata_error_handler(struct ata_port *ap); static unsigned int in_module_init = 1; @@ -237,8 +236,6 @@ static const struct ata_port_operations piix_pata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .probe_reset = piix_pata_probe_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -249,7 +246,7 @@ static const struct ata_port_operations piix_pata_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, + .error_handler = piix_pata_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, @@ -269,8 +266,6 @@ static const struct ata_port_operations piix_sata_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .probe_reset = piix_sata_probe_reset, - .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -281,7 +276,7 @@ static const struct ata_port_operations piix_sata_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, + .error_handler = piix_sata_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, @@ -466,59 +461,51 @@ cbl40: } /** - * piix_pata_probeinit - probeinit for PATA host controller + * piix_pata_prereset - prereset for PATA host controller * @ap: Target port * - * Probeinit including cable detection. - * - * LOCKING: - * None (inherited from caller). - */ -static void piix_pata_probeinit(struct ata_port *ap) -{ - piix_pata_cbl_detect(ap); - ata_std_probeinit(ap); -} - -/** - * piix_pata_probe_reset - Perform reset on PATA port and classify - * @ap: Port to reset - * @classes: Resulting classes of attached devices - * - * Reset PATA phy and classify attached devices. + * Prereset including cable detection. * * LOCKING: * None (inherited from caller). */ -static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes) +static int piix_pata_prereset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; } - return ata_drive_probe_reset(ap, piix_pata_probeinit, - ata_std_softreset, NULL, - ata_std_postreset, classes); + piix_pata_cbl_detect(ap); + + return ata_std_prereset(ap); +} + +static void piix_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL, + ata_std_postreset); } /** - * piix_sata_probe - Probe PCI device for present SATA devices - * @ap: Port associated with the PCI device we wish to probe + * piix_sata_prereset - prereset for SATA host controller + * @ap: Target port * * Reads and configures SATA PCI device's PCI config register * Port Configuration and Status (PCS) to determine port and - * device availability. + * device availability. Return -ENODEV to skip reset if no + * device is present. * * LOCKING: * None (inherited from caller). * * RETURNS: - * Mask of avaliable devices on the port. + * 0 if device is present, -ENODEV otherwise. */ -static unsigned int piix_sata_probe (struct ata_port *ap) +static int piix_sata_prereset(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); const unsigned int *map = ap->host_set->private_data; @@ -560,29 +547,19 @@ static unsigned int piix_sata_probe (struct ata_port *ap) DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", ap->id, pcs, present_mask); - return present_mask; -} - -/** - * piix_sata_probe_reset - Perform reset on SATA port and classify - * @ap: Port to reset - * @classes: Resulting classes of attached devices - * - * Reset SATA phy and classify attached devices. - * - * LOCKING: - * None (inherited from caller). - */ -static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - if (!piix_sata_probe(ap)) { + if (!present_mask) { ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); + ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; return 0; } - return ata_drive_probe_reset(ap, ata_std_probeinit, - ata_std_softreset, NULL, - ata_std_postreset, classes); + return ata_std_prereset(ap); +} + +static void piix_sata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL, + ata_std_postreset); } /** -- 2.39.2