From cc0b88cf5ecf13cdd750f08e201ce8fadcdb601f Mon Sep 17 00:00:00 2001 From: Michael Wu Date: Fri, 31 Aug 2007 01:15:25 -0400 Subject: [PATCH] [PATCH] Add adm8211 802.11b wireless driver This patch adds a mac80211 wireless driver for ADMtek ADM8211 based wireless cards. Signed-off-by: Michael Wu Signed-off-by: John W. Linville --- MAINTAINERS | 8 + drivers/net/wireless/Kconfig | 27 + drivers/net/wireless/Makefile | 2 + drivers/net/wireless/adm8211.c | 2063 ++++++++++++++++++++++++++++++++ drivers/net/wireless/adm8211.h | 659 ++++++++++ 5 files changed, 2759 insertions(+) create mode 100644 drivers/net/wireless/adm8211.c create mode 100644 drivers/net/wireless/adm8211.h diff --git a/MAINTAINERS b/MAINTAINERS index 9a91d9e3f1..e0861f7e1c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -284,6 +284,14 @@ M: corentin.labbe@geomatys.fr L: lm-sensors@lm-sensors.org S: Maintained +ADM8211 WIRELESS DRIVER +P: Michael Wu +M: flamingice@sourmilk.net +L: linux-wireless@vger.kernel.org +W: http://linuxwireless.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git +S: Maintained + ADT746X FAN DRIVER P: Colin Leroy M: colin@colino.net diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index ae27af0141..86480afe53 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -558,6 +558,33 @@ config RTL8187 Thanks to Realtek for their support! +config ADM8211 + tristate "ADMtek ADM8211 support" + depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + select CRC32 + select EEPROM_93CX6 + ---help--- + This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. + These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: + + Xterasys Cardbus XN-2411b + Blitz NetWave Point PC + TrendNet 221pc + Belkin F5D6001 + SMC 2635W + Linksys WPC11 v1 + Fiberline FL-WL-200X + 3com Office Connect (3CRSHPW796) + Corega WLPCIB-11 + SMC 2602W V2 EU + D-Link DWL-520 Revision C + + However, some of these cards have been replaced with other chips + like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or + the Ralink RT2400 (SMC2635W) without a model number change. + + Thanks to Infineon-ADMtek for their support of this driver. + source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/bcm43xx/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 4eb6d97528..e9bffdae0a 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -47,3 +47,5 @@ obj-$(CONFIG_LIBERTAS) += libertas/ rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o obj-$(CONFIG_RTL8187) += rtl8187.o + +obj-$(CONFIG_ADM8211) += adm8211.o diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c new file mode 100644 index 0000000000..eec01fc152 --- /dev/null +++ b/drivers/net/wireless/adm8211.c @@ -0,0 +1,2063 @@ + +/* + * Linux device driver for ADMtek ADM8211 (IEEE 802.11b MAC/BBP) + * + * Copyright (c) 2003, Jouni Malinen + * Copyright (c) 2004-2007, Michael Wu + * Some parts copyright (c) 2003 by David Young + * and used with permission. + * + * Much thanks to Infineon-ADMtek for their support of this driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. See README and COPYING for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "adm8211.h" + +MODULE_AUTHOR("Michael Wu "); +MODULE_AUTHOR("Jouni Malinen "); +MODULE_DESCRIPTION("Driver for IEEE 802.11b wireless cards based on ADMtek ADM8211"); +MODULE_SUPPORTED_DEVICE("ADM8211"); +MODULE_LICENSE("GPL"); + +static unsigned int tx_ring_size __read_mostly = 16; +static unsigned int rx_ring_size __read_mostly = 16; + +module_param(tx_ring_size, uint, 0); +module_param(rx_ring_size, uint, 0); + +static const char version[] = KERN_INFO "adm8211: " +"Copyright 2003, Jouni Malinen ; " +"Copyright 2004-2007, Michael Wu \n"; + + +static struct pci_device_id adm8211_pci_id_table[] __devinitdata = { + /* ADMtek ADM8211 */ + { PCI_DEVICE(0x10B7, 0x6000) }, /* 3Com 3CRSHPW796 */ + { PCI_DEVICE(0x1200, 0x8201) }, /* ? */ + { PCI_DEVICE(0x1317, 0x8201) }, /* ADM8211A */ + { PCI_DEVICE(0x1317, 0x8211) }, /* ADM8211B/C */ + { 0 } +}; + +static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom) +{ + struct adm8211_priv *priv = eeprom->data; + u32 reg = ADM8211_CSR_READ(SPR); + + eeprom->reg_data_in = reg & ADM8211_SPR_SDI; + eeprom->reg_data_out = reg & ADM8211_SPR_SDO; + eeprom->reg_data_clock = reg & ADM8211_SPR_SCLK; + eeprom->reg_chip_select = reg & ADM8211_SPR_SCS; +} + +static void adm8211_eeprom_register_write(struct eeprom_93cx6 *eeprom) +{ + struct adm8211_priv *priv = eeprom->data; + u32 reg = 0x4000 | ADM8211_SPR_SRS; + + if (eeprom->reg_data_in) + reg |= ADM8211_SPR_SDI; + if (eeprom->reg_data_out) + reg |= ADM8211_SPR_SDO; + if (eeprom->reg_data_clock) + reg |= ADM8211_SPR_SCLK; + if (eeprom->reg_chip_select) + reg |= ADM8211_SPR_SCS; + + ADM8211_CSR_WRITE(SPR, reg); + ADM8211_CSR_READ(SPR); /* eeprom_delay */ +} + +static int adm8211_read_eeprom(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + unsigned int words, i; + struct ieee80211_chan_range chan_range; + u16 cr49; + struct eeprom_93cx6 eeprom = { + .data = priv, + .register_read = adm8211_eeprom_register_read, + .register_write = adm8211_eeprom_register_write + }; + + if (ADM8211_CSR_READ(CSR_TEST0) & ADM8211_CSR_TEST0_EPTYP) { + /* 256 * 16-bit = 512 bytes */ + eeprom.width = PCI_EEPROM_WIDTH_93C66; + words = 256; + } else { + /* 64 * 16-bit = 128 bytes */ + eeprom.width = PCI_EEPROM_WIDTH_93C46; + words = 64; + } + + priv->eeprom_len = words * 2; + priv->eeprom = kmalloc(priv->eeprom_len, GFP_KERNEL); + if (!priv->eeprom) + return -ENOMEM; + + eeprom_93cx6_multiread(&eeprom, 0, (__le16 __force *)priv->eeprom, words); + + cr49 = le16_to_cpu(priv->eeprom->cr49); + priv->rf_type = (cr49 >> 3) & 0x7; + switch (priv->rf_type) { + case ADM8211_TYPE_INTERSIL: + case ADM8211_TYPE_RFMD: + case ADM8211_TYPE_MARVEL: + case ADM8211_TYPE_AIROHA: + case ADM8211_TYPE_ADMTEK: + break; + + default: + if (priv->revid < ADM8211_REV_CA) + priv->rf_type = ADM8211_TYPE_RFMD; + else + priv->rf_type = ADM8211_TYPE_AIROHA; + + printk(KERN_WARNING "%s (adm8211): Unknown RFtype %d\n", + pci_name(priv->pdev), (cr49 >> 3) & 0x7); + } + + priv->bbp_type = cr49 & 0x7; + switch (priv->bbp_type) { + case ADM8211_TYPE_INTERSIL: + case ADM8211_TYPE_RFMD: + case ADM8211_TYPE_MARVEL: + case ADM8211_TYPE_AIROHA: + case ADM8211_TYPE_ADMTEK: + break; + default: + if (priv->revid < ADM8211_REV_CA) + priv->bbp_type = ADM8211_TYPE_RFMD; + else + priv->bbp_type = ADM8211_TYPE_ADMTEK; + + printk(KERN_WARNING "%s (adm8211): Unknown BBPtype: %d\n", + pci_name(priv->pdev), cr49 >> 3); + } + + if (priv->eeprom->country_code >= ARRAY_SIZE(cranges)) { + printk(KERN_WARNING "%s (adm8211): Invalid country code (%d)\n", + pci_name(priv->pdev), priv->eeprom->country_code); + + chan_range = cranges[2]; + } else + chan_range = cranges[priv->eeprom->country_code]; + + printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n", + pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max); + + priv->modes[0].num_channels = chan_range.max - chan_range.min + 1; + priv->modes[0].channels = priv->channels; + + memcpy(priv->channels, adm8211_channels, sizeof(adm8211_channels)); + + for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++) + if (i >= chan_range.min && i <= chan_range.max) + priv->channels[i - 1].flag = + IEEE80211_CHAN_W_SCAN | + IEEE80211_CHAN_W_ACTIVE_SCAN | + IEEE80211_CHAN_W_IBSS; + + switch (priv->eeprom->specific_bbptype) { + case ADM8211_BBP_RFMD3000: + case ADM8211_BBP_RFMD3002: + case ADM8211_BBP_ADM8011: + priv->specific_bbptype = priv->eeprom->specific_bbptype; + break; + + default: + if (priv->revid < ADM8211_REV_CA) + priv->specific_bbptype = ADM8211_BBP_RFMD3000; + else + priv->specific_bbptype = ADM8211_BBP_ADM8011; + + printk(KERN_WARNING "%s (adm8211): Unknown specific BBP: %d\n", + pci_name(priv->pdev), priv->eeprom->specific_bbptype); + } + + switch (priv->eeprom->specific_rftype) { + case ADM8211_RFMD2948: + case ADM8211_RFMD2958: + case ADM8211_RFMD2958_RF3000_CONTROL_POWER: + case ADM8211_MAX2820: + case ADM8211_AL2210L: + priv->transceiver_type = priv->eeprom->specific_rftype; + break; + + default: + if (priv->revid == ADM8211_REV_BA) + priv->transceiver_type = ADM8211_RFMD2958_RF3000_CONTROL_POWER; + else if (priv->revid == ADM8211_REV_CA) + priv->transceiver_type = ADM8211_AL2210L; + else if (priv->revid == ADM8211_REV_AB) + priv->transceiver_type = ADM8211_RFMD2948; + + printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n", + pci_name(priv->pdev), priv->eeprom->specific_rftype); + + break; + } + + printk(KERN_DEBUG "%s (adm8211): RFtype=%d BBPtype=%d Specific BBP=%d " + "Transceiver=%d\n", pci_name(priv->pdev), priv->rf_type, + priv->bbp_type, priv->specific_bbptype, priv->transceiver_type); + + return 0; +} + +static inline void adm8211_write_sram(struct ieee80211_hw *dev, + u32 addr, u32 data) +{ + struct adm8211_priv *priv = dev->priv; + + ADM8211_CSR_WRITE(WEPCTL, addr | ADM8211_WEPCTL_TABLE_WR | + (priv->revid < ADM8211_REV_BA ? + 0 : ADM8211_WEPCTL_SEL_WEPTABLE )); + ADM8211_CSR_READ(WEPCTL); + msleep(1); + + ADM8211_CSR_WRITE(WESK, data); + ADM8211_CSR_READ(WESK); + msleep(1); +} + +static void adm8211_write_sram_bytes(struct ieee80211_hw *dev, + unsigned int addr, u8 *buf, + unsigned int len) +{ + struct adm8211_priv *priv = dev->priv; + u32 reg = ADM8211_CSR_READ(WEPCTL); + unsigned int i; + + if (priv->revid < ADM8211_REV_BA) { + for (i = 0; i < len; i += 2) { + u16 val = buf[i] | (buf[i + 1] << 8); + adm8211_write_sram(dev, addr + i / 2, val); + } + } else { + for (i = 0; i < len; i += 4) { + u32 val = (buf[i + 0] << 0 ) | (buf[i + 1] << 8 ) | + (buf[i + 2] << 16) | (buf[i + 3] << 24); + adm8211_write_sram(dev, addr + i / 4, val); + } + } + + ADM8211_CSR_WRITE(WEPCTL, reg); +} + +static void adm8211_clear_sram(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + u32 reg = ADM8211_CSR_READ(WEPCTL); + unsigned int addr; + + for (addr = 0; addr < ADM8211_SRAM_SIZE; addr++) + adm8211_write_sram(dev, addr, 0); + + ADM8211_CSR_WRITE(WEPCTL, reg); +} + +static int adm8211_get_stats(struct ieee80211_hw *dev, + struct ieee80211_low_level_stats *stats) +{ + struct adm8211_priv *priv = dev->priv; + + memcpy(stats, &priv->stats, sizeof(*stats)); + + return 0; +} + +static void adm8211_set_rx_mode(struct ieee80211_hw *dev, + unsigned short flags, int mc_count) +{ + struct adm8211_priv *priv = dev->priv; + unsigned int bit_nr; + u32 mc_filter[2]; + struct dev_mc_list *mclist; + void *tmp; + + if (flags & IFF_PROMISC) { + priv->nar |= ADM8211_NAR_PR; + priv->nar &= ~ADM8211_NAR_MM; + mc_filter[1] = mc_filter[0] = ~0; + } else if ((flags & IFF_ALLMULTI) || (mc_count > -1)) { + priv->nar &= ~ADM8211_NAR_PR; + priv->nar |= ADM8211_NAR_MM; + mc_filter[1] = mc_filter[0] = ~0; + } else { + priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR); + mc_filter[1] = mc_filter[0] = 0; + mclist = NULL; + while ((mclist = ieee80211_get_mc_list_item(dev, mclist, &tmp))) { + bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + + bit_nr &= 0x3F; + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + } + + ADM8211_IDLE_RX(); + + ADM8211_CSR_WRITE(MAR0, mc_filter[0]); + ADM8211_CSR_WRITE(MAR1, mc_filter[1]); + ADM8211_CSR_READ(NAR); + + if (flags & IFF_PROMISC) + dev->flags |= IEEE80211_HW_RX_INCLUDES_FCS; + else + dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; + + ADM8211_RESTORE(); +} + +static int adm8211_get_tx_stats(struct ieee80211_hw *dev, + struct ieee80211_tx_queue_stats *stats) +{ + struct adm8211_priv *priv = dev->priv; + struct ieee80211_tx_queue_stats_data *data = &stats->data[0]; + + data->len = priv->cur_tx - priv->dirty_tx; + data->limit = priv->tx_ring_size - 2; + data->count = priv->dirty_tx; + + return 0; +} + +static void adm8211_interrupt_tci(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + unsigned int dirty_tx; + + spin_lock(&priv->lock); + + for (dirty_tx = priv->dirty_tx; priv->cur_tx - dirty_tx; dirty_tx++) { + unsigned int entry = dirty_tx % priv->tx_ring_size; + u32 status = le32_to_cpu(priv->tx_ring[entry].status); + struct adm8211_tx_ring_info *info; + struct sk_buff *skb; + + if (status & TDES0_CONTROL_OWN || + !(status & TDES0_CONTROL_DONE)) + break; + + info = &priv->tx_buffers[entry]; + skb = info->skb; + + /* TODO: check TDES0_STATUS_TUF and TDES0_STATUS_TRO */ + + pci_unmap_single(priv->pdev, info->mapping, + info->skb->len, PCI_DMA_TODEVICE); + + if (info->tx_control.flags & IEEE80211_TXCTL_REQ_TX_STATUS) { + struct ieee80211_tx_status tx_status = {{0}}; + struct ieee80211_hdr *hdr; + size_t hdrlen = info->hdrlen; + + skb_pull(skb, sizeof(struct adm8211_tx_hdr)); + hdr = (struct ieee80211_hdr *)skb_push(skb, hdrlen); + memcpy(hdr, skb->cb, hdrlen); + memcpy(&tx_status.control, &info->tx_control, + sizeof(tx_status.control)); + if (!(status & TDES0_STATUS_ES)) + tx_status.flags |= IEEE80211_TX_STATUS_ACK; + ieee80211_tx_status_irqsafe(dev, skb, &tx_status); + } else + dev_kfree_skb_irq(skb); + info->skb = NULL; + } + + if (priv->cur_tx - dirty_tx < priv->tx_ring_size - 2) + ieee80211_wake_queue(dev, 0); + + priv->dirty_tx = dirty_tx; + spin_unlock(&priv->lock); +} + + +static void adm8211_interrupt_rci(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + unsigned int entry = priv->cur_rx % priv->rx_ring_size; + u32 status; + unsigned int pktlen; + struct sk_buff *skb, *newskb; + unsigned int limit = priv->rx_ring_size; + static const u8 rate_tbl[] = {10, 20, 55, 110, 220}; + u8 rssi, rate; + + while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) { + if (!limit--) + break; + + status = le32_to_cpu(priv->rx_ring[entry].status); + rate = (status & RDES0_STATUS_RXDR) >> 12; + rssi = le32_to_cpu(priv->rx_ring[entry].length) & + RDES1_STATUS_RSSI; + + pktlen = status & RDES0_STATUS_FL; + if (pktlen > RX_PKT_SIZE) { + if (net_ratelimit()) + printk(KERN_DEBUG "%s: frame too long (%d)\n", + wiphy_name(dev->wiphy), pktlen); + pktlen = RX_PKT_SIZE; + } + + if (!priv->soft_rx_crc && status & RDES0_STATUS_ES) { + skb = NULL; /* old buffer will be reused */ + /* TODO: update RX error stats */ + /* TODO: check RDES0_STATUS_CRC*E */ + } else if (pktlen < RX_COPY_BREAK) { + skb = dev_alloc_skb(pktlen); + if (skb) { + pci_dma_sync_single_for_cpu( + priv->pdev, + priv->rx_buffers[entry].mapping, + pktlen, PCI_DMA_FROMDEVICE); + memcpy(skb_put(skb, pktlen), + skb_tail_pointer(priv->rx_buffers[entry].skb), + pktlen); + pci_dma_sync_single_for_device( + priv->pdev, + priv->rx_buffers[entry].mapping, + RX_PKT_SIZE, PCI_DMA_FROMDEVICE); + } + } else { + newskb = dev_alloc_skb(RX_PKT_SIZE); + if (newskb) { + skb = priv->rx_buffers[entry].skb; + skb_put(skb, pktlen); + pci_unmap_single( + priv->pdev, + priv->rx_buffers[entry].mapping, + RX_PKT_SIZE, PCI_DMA_FROMDEVICE); + priv->rx_buffers[entry].skb = newskb; + priv->rx_buffers[entry].mapping = + pci_map_single(priv->pdev, + skb_tail_pointer(newskb), + RX_PKT_SIZE, + PCI_DMA_FROMDEVICE); + } else { + skb = NULL; + /* TODO: update rx dropped stats */ + } + + priv->rx_ring[entry].buffer1 = + cpu_to_le32(priv->rx_buffers[entry].mapping); + } + + priv->rx_ring[entry].status = cpu_to_le32(RDES0_STATUS_OWN | + RDES0_STATUS_SQL); + priv->rx_ring[entry].length = + cpu_to_le32(RX_PKT_SIZE | + (entry == priv->rx_ring_size - 1 ? + RDES1_CONTROL_RER : 0)); + + if (skb) { + struct ieee80211_rx_status rx_status = {0}; + + if (priv->revid < ADM8211_REV_CA) + rx_status.ssi = rssi; + else + rx_status.ssi = 100 - rssi; + + if (rate <= 4) + rx_status.rate = rate_tbl[rate]; + + rx_status.channel = priv->channel; + rx_status.freq = adm8211_channels[priv->channel - 1].freq; + rx_status.phymode = MODE_IEEE80211B; + + ieee80211_rx_irqsafe(dev, skb, &rx_status); + } + + entry = (++priv->cur_rx) % priv->rx_ring_size; + } + + /* TODO: check LPC and update stats? */ +} + + +static irqreturn_t adm8211_interrupt(int irq, void *dev_id) +{ +#define ADM8211_INT(x) \ +do { \ + if (unlikely(stsr & ADM8211_STSR_ ## x)) \ + printk(KERN_DEBUG "%s: " #x "\n", wiphy_name(dev->wiphy)); \ +} while (0) + + struct ieee80211_hw *dev = dev_id; + struct adm8211_priv *priv = dev->priv; + unsigned int count = 0; + u32 stsr; + + do { + stsr = ADM8211_CSR_READ(STSR); + ADM8211_CSR_WRITE(STSR, stsr); + if (stsr == 0xffffffff) + return IRQ_HANDLED; + + if (!(stsr & (ADM8211_STSR_NISS | ADM8211_STSR_AISS))) + break; + + if (stsr & ADM8211_STSR_RCI) + adm8211_interrupt_rci(dev); + if (stsr & ADM8211_STSR_TCI) + adm8211_interrupt_tci(dev); + + /*ADM8211_INT(LinkOn);*/ + /*ADM8211_INT(LinkOff);*/ + + ADM8211_INT(PCF); + ADM8211_INT(BCNTC); + ADM8211_INT(GPINT); + ADM8211_INT(ATIMTC); + ADM8211_INT(TSFTF); + ADM8211_INT(TSCZ); + ADM8211_INT(SQL); + ADM8211_INT(WEPTD); + ADM8211_INT(ATIME); + /*ADM8211_INT(TBTT);*/ + ADM8211_INT(TEIS); + ADM8211_INT(FBE); + ADM8211_INT(REIS); + ADM8211_INT(GPTT); + ADM8211_INT(RPS); + ADM8211_INT(RDU); + ADM8211_INT(TUF); + /*ADM8211_INT(TRT);*/ + /*ADM8211_INT(TLT);*/ + /*ADM8211_INT(TDU);*/ + ADM8211_INT(TPS); + + } while (count++ < 20); + + return IRQ_RETVAL(count); + +#undef ADM8211_INT +} + +#define WRITE_SYN(name,v_mask,v_shift,a_mask,a_shift,bits,prewrite,postwrite)\ +static void adm8211_rf_write_syn_ ## name (struct ieee80211_hw *dev, \ + u16 addr, u32 value) { \ + struct adm8211_priv *priv = dev->priv; \ + unsigned int i; \ + u32 reg, bitbuf; \ + \ + value &= v_mask; \ + addr &= a_mask; \ + bitbuf = (value << v_shift) | (addr << a_shift); \ + \ + ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_1); \ + ADM8211_CSR_READ(SYNRF); \ + ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_0); \ + ADM8211_CSR_READ(SYNRF); \ + \ + if (prewrite) { \ + ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_WRITE_SYNDATA_0); \ + ADM8211_CSR_READ(SYNRF); \ + } \ + \ + for (i = 0; i <= bits; i++) { \ + if (bitbuf & (1 << (bits - i))) \ + reg = ADM8211_SYNRF_WRITE_SYNDATA_1; \ + else \ + reg = ADM8211_SYNRF_WRITE_SYNDATA_0; \ + \ + ADM8211_CSR_WRITE(SYNRF, reg); \ + ADM8211_CSR_READ(SYNRF); \ + \ + ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_1); \ + ADM8211_CSR_READ(SYNRF); \ + ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_0); \ + ADM8211_CSR_READ(SYNRF); \ + } \ + \ + if (postwrite == 1) { \ + ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_0); \ + ADM8211_CSR_READ(SYNRF); \ + } \ + if (postwrite == 2) { \ + ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_1); \ + ADM8211_CSR_READ(SYNRF); \ + } \ + \ + ADM8211_CSR_WRITE(SYNRF, 0); \ + ADM8211_CSR_READ(SYNRF); \ +} + +WRITE_SYN(max2820, 0x00FFF, 0, 0x0F, 12, 15, 1, 1) +WRITE_SYN(al2210l, 0xFFFFF, 4, 0x0F, 0, 23, 1, 1) +WRITE_SYN(rfmd2958, 0x3FFFF, 0, 0x1F, 18, 23, 0, 1) +WRITE_SYN(rfmd2948, 0x0FFFF, 4, 0x0F, 0, 21, 0, 2) + +#undef WRITE_SYN + +static int adm8211_write_bbp(struct ieee80211_hw *dev, u8 addr, u8 data) +{ + struct adm8211_priv *priv = dev->priv; + unsigned int timeout; + u32 reg; + + timeout = 10; + while (timeout > 0) { + reg = ADM8211_CSR_READ(BBPCTL); + if (!(reg & (ADM8211_BBPCTL_WR | ADM8211_BBPCTL_RD))) + break; + timeout--; + msleep(2); + } + + if (timeout == 0) { + printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed" + " prewrite (reg=0x%08x)\n", + wiphy_name(dev->wiphy), addr, data, reg); + return -ETIMEDOUT; + } + + switch (priv->bbp_type) { + case ADM8211_TYPE_INTERSIL: + reg = ADM8211_BBPCTL_MMISEL; /* three wire interface */ + break; + case ADM8211_TYPE_RFMD: + reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP | + (0x01 << 18); + break; + case ADM8211_TYPE_ADMTEK: + reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP | + (0x05 << 18); + break; + } + reg |= ADM8211_BBPCTL_WR | (addr << 8) | data; + + ADM8211_CSR_WRITE(BBPCTL, reg); + + timeout = 10; + while (timeout > 0) { + reg = ADM8211_CSR_READ(BBPCTL); + if (!(reg & ADM8211_BBPCTL_WR)) + break; + timeout--; + msleep(2); + } + + if (timeout == 0) { + ADM8211_CSR_WRITE(BBPCTL, ADM8211_CSR_READ(BBPCTL) & + ~ADM8211_BBPCTL_WR); + printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed" + " postwrite (reg=0x%08x)\n", + wiphy_name(dev->wiphy), addr, data, reg); + return -ETIMEDOUT; + } + + return 0; +} + +static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan) +{ + static const u32 adm8211_rfmd2958_reg5[] = + {0x22BD, 0x22D2, 0x22E8, 0x22FE, 0x2314, 0x232A, 0x2340, + 0x2355, 0x236B, 0x2381, 0x2397, 0x23AD, 0x23C2, 0x23F7}; + static const u32 adm8211_rfmd2958_reg6[] = + {0x05D17, 0x3A2E8, 0x2E8BA, 0x22E8B, 0x1745D, 0x0BA2E, 0x00000, + 0x345D1, 0x28BA2, 0x1D174, 0x11745, 0x05D17, 0x3A2E8, 0x11745}; + + struct adm8211_priv *priv = dev->priv; + u8 ant_power = priv->ant_power > 0x3F ? + priv->eeprom->antenna_power[chan - 1] : priv->ant_power; + u8 tx_power = priv->tx_power > 0x3F ? + priv->eeprom->tx_power[chan - 1] : priv->tx_power; + u8 lpf_cutoff = priv->lpf_cutoff == 0xFF ? + priv->eeprom->lpf_cutoff[chan - 1] : priv->lpf_cutoff; + u8 lnags_thresh = priv->lnags_threshold == 0xFF ? + priv->eeprom->lnags_threshold[chan - 1] : priv->lnags_threshold; + u32 reg; + + ADM8211_IDLE(); + + /* Program synthesizer to new channel */ + switch (priv->transceiver_type) { + case ADM8211_RFMD2958: + case ADM8211_RFMD2958_RF3000_CONTROL_POWER: + adm8211_rf_write_syn_rfmd2958(dev, 0x00, 0x04007); + adm8211_rf_write_syn_rfmd2958(dev, 0x02, 0x00033); + + adm8211_rf_write_syn_rfmd2958(dev, 0x05, + adm8211_rfmd2958_reg5[chan - 1]); + adm8211_rf_write_syn_rfmd2958(dev, 0x06, + adm8211_rfmd2958_reg6[chan - 1]); + break; + + case ADM8211_RFMD2948: + adm8211_rf_write_syn_rfmd2948(dev, SI4126_MAIN_CONF, + SI4126_MAIN_XINDIV2); + adm8211_rf_write_syn_rfmd2948(dev, SI4126_POWERDOWN, + SI4126_POWERDOWN_PDIB | + SI4126_POWERDOWN_PDRB); + adm8211_rf_write_syn_rfmd2948(dev, SI4126_PHASE_DET_GAIN, 0); + adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_N_DIV, + (chan == 14 ? + 2110 : (2033 + (chan * 5)))); + adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_N_DIV, 1496); + adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_R_DIV, 44); + adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_R_DIV, 44); + break; + + case ADM8211_MAX2820: + adm8211_rf_write_syn_max2820(dev, 0x3, + (chan == 14 ? 0x054 : (0x7 + (chan * 5)))); + break; + + case ADM8211_AL2210L: + adm8211_rf_write_syn_al2210l(dev, 0x0, + (chan == 14 ? 0x229B4 : (0x22967 + (chan * 5)))); + break; + + default: + printk(KERN_DEBUG "%s: unsupported transceiver type %d\n", + wiphy_name(dev->wiphy), priv->transceiver_type); + break; + } + + /* write BBP regs */ + if (priv->bbp_type == ADM8211_TYPE_RFMD) { + + /* SMC 2635W specific? adm8211b doesn't use the 2948 though.. */ + /* TODO: remove if SMC 2635W doesn't need this */ + if (priv->transceiver_type == ADM8211_RFMD2948) { + reg = ADM8211_CSR_READ(GPIO); + reg &= 0xfffc0000; + reg |= ADM8211_CSR_GPIO_EN0; + if (chan != 14) + reg |= ADM8211_CSR_GPIO_O0; + ADM8211_CSR_WRITE(GPIO, reg); + } + + if (priv->transceiver_type == ADM8211_RFMD2958) { + /* set PCNT2 */ + adm8211_rf_write_syn_rfmd2958(dev, 0x0B, 0x07100); + /* set PCNT1 P_DESIRED/MID_BIAS */ + reg = le16_to_cpu(priv->eeprom->cr49); + reg >>= 13; + reg <<= 15; + reg |= ant_power << 9; + adm8211_rf_write_syn_rfmd2958(dev, 0x0A, reg); + /* set TXRX TX_GAIN */ + adm8211_rf_write_syn_rfmd2958(dev, 0x09, 0x00050 | + (priv->revid < ADM8211_REV_CA ? tx_power : 0)); + } else { + reg = ADM8211_CSR_READ(PLCPHD); + reg &= 0xff00ffff; + reg |= tx_power << 18; + ADM8211_CSR_WRITE(PLCPHD, reg); + } + + ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF | + ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST); + ADM8211_CSR_READ(SYNRF); + msleep(30); + + /* RF3000 BBP */ + if (priv->transceiver_type != ADM8211_RFMD2958) + adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, + tx_power<<2); + adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, lpf_cutoff); + adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, lnags_thresh); + adm8211_write_bbp(dev, 0x1c, priv->revid == ADM8211_REV_BA ? + priv->eeprom->cr28 : 0); + adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29); + + ADM8211_CSR_WRITE(SYNRF, 0); + + /* Nothing to do for ADMtek BBP */ + } else if (priv->bbp_type != ADM8211_TYPE_ADMTEK) + printk(KERN_DEBUG "%s: unsupported BBP type %d\n", + wiphy_name(dev->wiphy), priv->bbp_type); + + ADM8211_RESTORE(); + + /* update current channel for adhoc (and maybe AP mode) */ + reg = ADM8211_CSR_READ(CAP0); + reg &= ~0xF; + reg |= chan; + ADM8211_CSR_WRITE(CAP0, reg); + + return 0; +} + +static void adm8211_update_mode(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + + ADM8211_IDLE(); + + priv->soft_rx_crc = 0; + switch (priv->mode) { + case IEEE80211_IF_TYPE_STA: + priv->nar &= ~(ADM8211_NAR_PR | ADM8211_NAR_EA); + priv->nar |= ADM8211_NAR_ST | ADM8211_NAR_SR; + break; + case IEEE80211_IF_TYPE_IBSS: + priv->nar &= ~ADM8211_NAR_PR; + priv->nar |= ADM8211_NAR_EA | ADM8211_NAR_ST | ADM8211_NAR_SR; + + /* don't trust the error bits on rev 0x20 and up in adhoc */ + if (priv->revid >= ADM8211_REV_BA) + priv->soft_rx_crc = 1; + break; + case IEEE80211_IF_TYPE_MNTR: + priv->nar &= ~(ADM8211_NAR_EA | ADM8211_NAR_ST); + priv->nar |= ADM8211_NAR_PR | ADM8211_NAR_SR; + break; + } + + ADM8211_RESTORE(); +} + +static void adm8211_hw_init_syn(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + + switch (priv->transceiver_type) { + case ADM8211_RFMD2958: + case ADM8211_RFMD2958_RF3000_CONTROL_POWER: + /* comments taken from ADMtek vendor driver */ + + /* Reset RF2958 after power on */ + adm8211_rf_write_syn_rfmd2958(dev, 0x1F, 0x00000); + /* Initialize RF VCO Core Bias to maximum */ + adm8211_rf_write_syn_rfmd2958(dev, 0x0C, 0x3001F); + /* Initialize IF PLL */ + adm8211_rf_write_syn_rfmd2958(dev, 0x01, 0x29C03); + /* Initialize IF PLL Coarse Tuning */ + adm8211_rf_write_syn_rfmd2958(dev, 0x03, 0x1FF6F); + /* Initialize RF PLL */ + adm8211_rf_write_syn_rfmd2958(dev, 0x04, 0x29403); + /* Initialize RF PLL Coarse Tuning */ + adm8211_rf_write_syn_rfmd2958(dev, 0x07, 0x1456F); + /* Initialize TX gain and filter BW (R9) */ + adm8211_rf_write_syn_rfmd2958(dev, 0x09, + (priv->transceiver_type == ADM8211_RFMD2958 ? + 0x10050 : 0x00050)); + /* Initialize CAL register */ + adm8211_rf_write_syn_rfmd2958(dev, 0x08, 0x3FFF8); + break; + + case ADM8211_MAX2820: + adm8211_rf_write_syn_max2820(dev, 0x1, 0x01E); + adm8211_rf_write_syn_max2820(dev, 0x2, 0x001); + adm8211_rf_write_syn_max2820(dev, 0x3, 0x054); + adm8211_rf_write_syn_max2820(dev, 0x4, 0x310); + adm8211_rf_write_syn_max2820(dev, 0x5, 0x000); + break; + + case ADM8211_AL2210L: + adm8211_rf_write_syn_al2210l(dev, 0x0, 0x0196C); + adm8211_rf_write_syn_al2210l(dev, 0x1, 0x007CB); + adm8211_rf_write_syn_al2210l(dev, 0x2, 0x3582F); + adm8211_rf_write_syn_al2210l(dev, 0x3, 0x010A9); + adm8211_rf_write_syn_al2210l(dev, 0x4, 0x77280); + adm8211_rf_write_syn_al2210l(dev, 0x5, 0x45641); + adm8211_rf_write_syn_al2210l(dev, 0x6, 0xEA130); + adm8211_rf_write_syn_al2210l(dev, 0x7, 0x80000); + adm8211_rf_write_syn_al2210l(dev, 0x8, 0x7850F); + adm8211_rf_write_syn_al2210l(dev, 0x9, 0xF900C); + adm8211_rf_write_syn_al2210l(dev, 0xA, 0x00000); + adm8211_rf_write_syn_al2210l(dev, 0xB, 0x00000); + break; + + case ADM8211_RFMD2948: + default: + break; + } +} + +static int adm8211_hw_init_bbp(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + u32 reg; + + /* write addresses */ + if (priv->bbp_type == ADM8211_TYPE_INTERSIL) { + ADM8211_CSR_WRITE(MMIWA, 0x100E0C0A); + ADM8211_CSR_WRITE(MMIRD0, 0x00007C7E); + ADM8211_CSR_WRITE(MMIRD1, 0x00100000); + } else if (priv->bbp_type == ADM8211_TYPE_RFMD || + priv->bbp_type == ADM8211_TYPE_ADMTEK) { + /* check specific BBP type */ + switch (priv->specific_bbptype) { + case ADM8211_BBP_RFMD3000: + case ADM8211_BBP_RFMD3002: + ADM8211_CSR_WRITE(MMIWA, 0x00009101); + ADM8211_CSR_WRITE(MMIRD0, 0x00000301); + break; + + case ADM8211_BBP_ADM8011: + ADM8211_CSR_WRITE(MMIWA, 0x00008903); + ADM8211_CSR_WRITE(MMIRD0, 0x00001716); + + reg = ADM8211_CSR_READ(BBPCTL); + reg &= ~ADM8211_BBPCTL_TYPE; + reg |= 0x5 << 18; + ADM8211_CSR_WRITE(BBPCTL, reg); + break; + } + + switch (priv->revid) { + case ADM8211_REV_CA: + if (priv->transceiver_type == ADM8211_RFMD2958 || + priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER || + priv->transceiver_type == ADM8211_RFMD2948) + ADM8211_CSR_WRITE(SYNCTL, 0x1 << 22); + else if (priv->transceiver_type == ADM8211_MAX2820 || + priv->transceiver_type == ADM8211_AL2210L) + ADM8211_CSR_WRITE(SYNCTL, 0x3 << 22); + break; + + case ADM8211_REV_BA: + reg = ADM8211_CSR_READ(MMIRD1); + reg &= 0x0000FFFF; + reg |= 0x7e100000; + ADM8211_CSR_WRITE(MMIRD1, reg); + break; + + case ADM8211_REV_AB: + case ADM8211_REV_AF: + default: + ADM8211_CSR_WRITE(MMIRD1, 0x7e100000); + break; + } + + /* For RFMD */ + ADM8211_CSR_WRITE(MACTEST, 0x800); + } + + adm8211_hw_init_syn(dev); + + /* Set RF Power control IF pin to PE1+PHYRST# */ + ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF | + ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST); + ADM8211_CSR_READ(SYNRF); + msleep(20); + + /* write BBP regs */ + if (priv->bbp_type == ADM8211_TYPE_RFMD) { + /* RF3000 BBP */ + /* another set: + * 11: c8 + * 14: 14 + * 15: 50 (chan 1..13; chan 14: d0) + * 1c: 00 + * 1d: 84 + */ + adm8211_write_bbp(dev, RF3000_CCA_CTRL, 0x80); + /* antenna selection: diversity */ + adm8211_write_bbp(dev, RF3000_DIVERSITY__RSSI, 0x80); + adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, 0x74); + adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, 0x38); + adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, 0x40); + + if (priv->eeprom->major_version < 2) { + adm8211_write_bbp(dev, 0x1c, 0x00); + adm8211_write_bbp(dev, 0x1d, 0x80); + } else { + if (priv->revid == ADM8211_REV_BA) + adm8211_write_bbp(dev, 0x1c, priv->eeprom->cr28); + else + adm8211_write_bbp(dev, 0x1c, 0x00); + + adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29); + } + } else if (priv->bbp_type == ADM8211_TYPE_ADMTEK) { + /* reset baseband */ + adm8211_write_bbp(dev, 0x00, 0xFF); + /* antenna selection: diversity */ + adm8211_write_bbp(dev, 0x07, 0x0A); + + /* TODO: find documentation for this */ + switch (priv->transceiver_type) { + case ADM8211_RFMD2958: + case ADM8211_RFMD2958_RF3000_CONTROL_POWER: + adm8211_write_bbp(dev, 0x00, 0x00); + adm8211_write_bbp(dev, 0x01, 0x00); + adm8211_write_bbp(dev, 0x02, 0x00); + adm8211_write_bbp(dev, 0x03, 0x00); + adm8211_write_bbp(dev, 0x06, 0x0f); + adm8211_write_bbp(dev, 0x09, 0x00); + adm8211_write_bbp(dev, 0x0a, 0x00); + adm8211_write_bbp(dev, 0x0b, 0x00); + adm8211_write_bbp(dev, 0x0c, 0x00); + adm8211_write_bbp(dev, 0x0f, 0xAA); + adm8211_write_bbp(dev, 0x10, 0x8c); + adm8211_write_bbp(dev, 0x11, 0x43); + adm8211_write_bbp(dev, 0x18, 0x40); + adm8211_write_bbp(dev, 0x20, 0x23); + adm8211_write_bbp(dev, 0x21, 0x02); + adm8211_write_bbp(dev, 0x22, 0x28); + adm8211_write_bbp(dev, 0x23, 0x30); + adm8211_write_bbp(dev, 0x24, 0x2d); + adm8211_write_bbp(dev, 0x28, 0x35); + adm8211_write_bbp(dev, 0x2a, 0x8c); + adm8211_write_bbp(dev, 0x2b, 0x81); + adm8211_write_bbp(dev, 0x2c, 0x44); + adm8211_write_bbp(dev, 0x2d, 0x0A); + adm8211_write_bbp(dev, 0x29, 0x40); + adm8211_write_bbp(dev, 0x60, 0x08); + adm8211_write_bbp(dev, 0x64, 0x01); + break; + + case ADM8211_MAX2820: + adm8211_write_bbp(dev, 0x00, 0x00); + adm8211_write_bbp(dev, 0x01, 0x00); + adm8211_write_bbp(dev, 0x02, 0x00); + adm8211_write_bbp(dev, 0x03, 0x00); + adm8211_write_bbp(dev, 0x06, 0x0f); + adm8211_write_bbp(dev, 0x09, 0x05); + adm8211_write_bbp(dev, 0x0a, 0x02); + adm8211_write_bbp(dev, 0x0b, 0x00); + adm8211_write_bbp(dev, 0x0c, 0x0f); + adm8211_write_bbp(dev, 0x0f, 0x55); + adm8211_write_bbp(dev, 0x10, 0x8d); + adm8211_write_bbp(dev, 0x11, 0x43); + adm8211_write_bbp(dev, 0x18, 0x4a); + adm8211_write_bbp(dev, 0x20, 0x20); + adm8211_write_bbp(dev, 0x21, 0x02); + adm8211_write_bbp(dev, 0x22, 0x23); + adm8211_write_bbp(dev, 0x23, 0x30); + adm8211_write_bbp(dev, 0x24, 0x2d); + adm8211_write_bbp(dev, 0x2a, 0x8c); + adm8211_write_bbp(dev, 0x2b, 0x81); + adm8211_write_bbp(dev, 0x2c, 0x44); + adm8211_write_bbp(dev, 0x29, 0x4a); + adm8211_write_bbp(dev, 0x60, 0x2b); + adm8211_write_bbp(dev, 0x64, 0x01); + break; + + case ADM8211_AL2210L: + adm8211_write_bbp(dev, 0x00, 0x00); + adm8211_write_bbp(dev, 0x01, 0x00); + adm8211_write_bbp(dev, 0x02, 0x00); + adm8211_write_bbp(dev, 0x03, 0x00); + adm8211_write_bbp(dev, 0x06, 0x0f); + adm8211_write_bbp(dev, 0x07, 0x05); + adm8211_write_bbp(dev, 0x08, 0x03); + adm8211_write_bbp(dev, 0x09, 0x00); + adm8211_write_bbp(dev, 0x0a, 0x00); + adm8211_write_bbp(dev, 0x0b, 0x00); + adm8211_write_bbp(dev, 0x0c, 0x10); + adm8211_write_bbp(dev, 0x0f, 0x55); + adm8211_write_bbp(dev, 0x10, 0x8d); + adm8211_write_bbp(dev, 0x11, 0x43); + adm8211_write_bbp(dev, 0x18, 0x4a); + adm8211_write_bbp(dev, 0x20, 0x20); + adm8211_write_bbp(dev, 0x21, 0x02); + adm8211_write_bbp(dev, 0x22, 0x23); + adm8211_write_bbp(dev, 0x23, 0x30); + adm8211_write_bbp(dev, 0x24, 0x2d); + adm8211_write_bbp(dev, 0x2a, 0xaa); + adm8211_write_bbp(dev, 0x2b, 0x81); + adm8211_write_bbp(dev, 0x2c, 0x44); + adm8211_write_bbp(dev, 0x29, 0xfa); + adm8211_write_bbp(dev, 0x60, 0x2d); + adm8211_write_bbp(dev, 0x64, 0x01); + break; + + case ADM8211_RFMD2948: + break; + + default: + printk(KERN_DEBUG "%s: unsupported transceiver %d\n", + wiphy_name(dev->wiphy), priv->transceiver_type); + break; + } + } else + printk(KERN_DEBUG "%s: unsupported BBP %d\n", + wiphy_name(dev->wiphy), priv->bbp_type); + + ADM8211_CSR_WRITE(SYNRF, 0); + + /* Set RF CAL control source to MAC control */ + reg = ADM8211_CSR_READ(SYNCTL); + reg |= ADM8211_SYNCTL_SELCAL; + ADM8211_CSR_WRITE(SYNCTL, reg); + + return 0; +} + +/* configures hw beacons/probe responses */ +static int adm8211_set_rate(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + u32 reg; + int i = 0; + u8 rate_buf[12] = {0}; + + /* write supported rates */ + if (priv->revid != ADM8211_REV_BA) { + rate_buf[0] = ARRAY_SIZE(adm8211_rates); + for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++) + rate_buf[i + 1] = (adm8211_rates[i].rate / 5) | 0x80; + } else { + /* workaround for rev BA specific bug */ + rate_buf[0] = 0x04; + rate_buf[1] = 0x82; + rate_buf[2] = 0x04; + rate_buf[3] = 0x0b; + rate_buf[4] = 0x16; + } + + adm8211_write_sram_bytes(dev, ADM8211_SRAM_SUPP_RATE, rate_buf, + ARRAY_SIZE(adm8211_rates) + 1); + + reg = ADM8211_CSR_READ(PLCPHD) & 0x00FFFFFF; /* keep bits 0-23 */ + reg |= 1 << 15; /* short preamble */ + reg |= 110 << 24; + ADM8211_CSR_WRITE(PLCPHD, reg); + + /* MTMLT = 512 TU (max TX MSDU lifetime) + * BCNTSIG = plcp_signal (beacon, probe resp, and atim TX rate) + * SRTYLIM = 224 (short retry limit, TX header value is default) */ + ADM8211_CSR_WRITE(TXLMT, (512 << 16) | (110 << 8) | (224 << 0)); + + return 0; +} + +static void adm8211_hw_init(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + u32 reg; + u8 cline; + + reg = le32_to_cpu(ADM8211_CSR_READ(PAR)); + reg |= ADM8211_PAR_MRLE | ADM8211_PAR_MRME; + reg &= ~(ADM8211_PAR_BAR | ADM8211_PAR_CAL); + + if (!pci_set_mwi(priv->pdev)) { + reg |= 0x1 << 24; + pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline); + + switch (cline) { + case 0x8: reg |= (0x1 << 14); + break; + case 0x16: reg |= (0x2 << 14); + break; + case 0x32: reg |= (0x3 << 14); + break; + default: reg |= (0x0 << 14); + break; + } + } + + ADM8211_CSR_WRITE(PAR, reg); + + reg = ADM8211_CSR_READ(CSR_TEST1); + reg &= ~(0xF << 28); + reg |= (1 << 28) | (1 << 31); + ADM8211_CSR_WRITE(CSR_TEST1, reg); + + /* lose link after 4 lost beacons */ + reg = (0x04 << 21) | ADM8211_WCSR_TSFTWE | ADM8211_WCSR_LSOE; + ADM8211_CSR_WRITE(WCSR, reg); + + /* Disable APM, enable receive FIFO threshold, and set drain receive + * threshold to store-and-forward */ + reg = ADM8211_CSR_READ(CMDR); + reg &= ~(ADM8211_CMDR_APM | ADM8211_CMDR_DRT); + reg |= ADM8211_CMDR_RTE | ADM8211_CMDR_DRT_SF; + ADM8211_CSR_WRITE(CMDR, reg); + + adm8211_set_rate(dev); + + /* 4-bit values: + * PWR1UP = 8 * 2 ms + * PWR0PAPE = 8 us or 5 us + * PWR1PAPE = 1 us or 3 us + * PWR0TRSW = 5 us + * PWR1TRSW = 12 us + * PWR0PE2 = 13 us + * PWR1PE2 = 1 us + * PWR0TXPE = 8 or 6 */ + if (priv->revid < ADM8211_REV_CA) + ADM8211_CSR_WRITE(TOFS2, 0x8815cd18); + else + ADM8211_CSR_WRITE(TOFS2, 0x8535cd16); + + /* Enable store and forward for transmit */ + priv->nar = ADM8211_NAR_SF | ADM8211_NAR_PB; + ADM8211_CSR_WRITE(NAR, priv->nar); + + /* Reset RF */ + ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_RADIO); + ADM8211_CSR_READ(SYNRF); + msleep(10); + ADM8211_CSR_WRITE(SYNRF, 0); + ADM8211_CSR_READ(SYNRF); + msleep(5); + + /* Set CFP Max Duration to 0x10 TU */ + reg = ADM8211_CSR_READ(CFPP); + reg &= ~(0xffff << 8); + reg |= 0x0010 << 8; + ADM8211_CSR_WRITE(CFPP, reg); + + /* USCNT = 0x16 (number of system clocks, 22 MHz, in 1us + * TUCNT = 0x3ff - Tu counter 1024 us */ + ADM8211_CSR_WRITE(TOFS0, (0x16 << 24) | 0x3ff); + + /* SLOT=20 us, SIFS=110 cycles of 22 MHz (5 us), + * DIFS=50 us, EIFS=100 us */ + if (priv->revid < ADM8211_REV_CA) + ADM8211_CSR_WRITE(IFST, (20 << 23) | (110 << 15) | + (50 << 9) | 100); + else + ADM8211_CSR_WRITE(IFST, (20 << 23) | (24 << 15) | + (50 << 9) | 100); + + /* PCNT = 1 (MAC idle time awake/sleep, unit S) + * RMRD = 2346 * 8 + 1 us (max RX duration) */ + ADM8211_CSR_WRITE(RMD, (1 << 16) | 18769); + + /* MART=65535 us, MIRT=256 us, TSFTOFST=0 us */ + ADM8211_CSR_WRITE(RSPT, 0xffffff00); + + /* Initialize BBP (and SYN) */ + adm8211_hw_init_bbp(dev); + + /* make sure interrupts are off */ + ADM8211_CSR_WRITE(IER, 0); + + /* ACK interrupts */ + ADM8211_CSR_WRITE(STSR, ADM8211_CSR_READ(STSR)); + + /* Setup WEP (turns it off for now) */ + reg = ADM8211_CSR_READ(MACTEST); + reg &= ~(7 << 20); + ADM8211_CSR_WRITE(MACTEST, reg); + + reg = ADM8211_CSR_READ(WEPCTL); + reg &= ~ADM8211_WEPCTL_WEPENABLE; + reg |= ADM8211_WEPCTL_WEPRXBYP; + ADM8211_CSR_WRITE(WEPCTL, reg); + + /* Clear the missed-packet counter. */ + ADM8211_CSR_READ(LPC); + + if (!priv->mac_addr) + return; + + /* set mac address */ + ADM8211_CSR_WRITE(PAR0, *(u32 *)priv->mac_addr); + ADM8211_CSR_WRITE(PAR1, *(u16 *)&priv->mac_addr[4]); +} + +static int adm8211_hw_reset(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + u32 reg, tmp; + int timeout = 100; + + /* Power-on issue */ + /* TODO: check if this is necessary */ + ADM8211_CSR_WRITE(FRCTL, 0); + + /* Reset the chip */ + tmp = ADM8211_CSR_READ(PAR); + ADM8211_CSR_WRITE(PAR, ADM8211_PAR_SWR); + + while ((ADM8211_CSR_READ(PAR) & ADM8211_PAR_SWR) && timeout--) + msleep(50); + + if (timeout <= 0) + return -ETIMEDOUT; + + ADM8211_CSR_WRITE(PAR, tmp); + + if (priv->revid == ADM8211_REV_BA && + (priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER || + priv->transceiver_type == ADM8211_RFMD2958)) { + reg = ADM8211_CSR_READ(CSR_TEST1); + reg |= (1 << 4) | (1 << 5); + ADM8211_CSR_WRITE(CSR_TEST1, reg); + } else if (priv->revid == ADM8211_REV_CA) { + reg = ADM8211_CSR_READ(CSR_TEST1); + reg &= ~((1 << 4) | (1 << 5)); + ADM8211_CSR_WRITE(CSR_TEST1, reg); + } + + ADM8211_CSR_WRITE(FRCTL, 0); + + reg = ADM8211_CSR_READ(CSR_TEST0); + reg |= ADM8211_CSR_TEST0_EPRLD; /* EEPROM Recall */ + ADM8211_CSR_WRITE(CSR_TEST0, reg); + + adm8211_clear_sram(dev); + + return 0; +} + +static u64 adm8211_get_tsft(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + u32 tsftl; + u64 tsft; + + tsftl = ADM8211_CSR_READ(TSFTL); + tsft = ADM8211_CSR_READ(TSFTH); + tsft <<= 32; + tsft |= tsftl; + + return tsft; +} + +static void adm8211_set_interval(struct ieee80211_hw *dev, + unsigned short bi, unsigned short li) +{ + struct adm8211_priv *priv = dev->priv; + u32 reg; + + /* BP (beacon interval) = data->beacon_interval + * LI (listen interval) = data->listen_interval (in beacon intervals) */ + reg = (bi << 16) | li; + ADM8211_CSR_WRITE(BPLI, reg); +} + +static void adm8211_set_bssid(struct ieee80211_hw *dev, u8 *bssid) +{ + struct adm8211_priv *priv = dev->priv; + u32 reg; + + reg = bssid[0] | (bssid[1] << 8) | (bssid[2] << 16) | (bssid[3] << 24); + ADM8211_CSR_WRITE(BSSID0, reg); + reg = ADM8211_CSR_READ(ABDA1); + reg &= 0x0000ffff; + reg |= (bssid[4] << 16) | (bssid[5] << 24); + ADM8211_CSR_WRITE(ABDA1, reg); +} + +static int adm8211_set_ssid(struct ieee80211_hw *dev, u8 *ssid, size_t ssid_len) +{ + struct adm8211_priv *priv = dev->priv; + u8 buf[36]; + + if (ssid_len > 32) + return -EINVAL; + + memset(buf, 0, sizeof(buf)); + buf[0] = ssid_len; + memcpy(buf + 1, ssid, ssid_len); + adm8211_write_sram_bytes(dev, ADM8211_SRAM_SSID, buf, 33); + /* TODO: configure beacon for adhoc? */ + return 0; +} + +static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) +{ + struct adm8211_priv *priv = dev->priv; + + if (conf->channel != priv->channel) { + priv->channel = conf->channel; + adm8211_rf_set_channel(dev, priv->channel); + } + + return 0; +} + +static int adm8211_config_interface(struct ieee80211_hw *dev, int if_id, + struct ieee80211_if_conf *conf) +{ + struct adm8211_priv *priv = dev->priv; + + if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) { + adm8211_set_bssid(dev, conf->bssid); + memcpy(priv->bssid, conf->bssid, ETH_ALEN); + } + + if (conf->ssid_len != priv->ssid_len || + memcmp(conf->ssid, priv->ssid, conf->ssid_len)) { + adm8211_set_ssid(dev, conf->ssid, conf->ssid_len); + priv->ssid_len = conf->ssid_len; + memcpy(priv->ssid, conf->ssid, conf->ssid_len); + } + + return 0; +} + +static int adm8211_add_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct adm8211_priv *priv = dev->priv; + /* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */ + if (priv->mode != IEEE80211_IF_TYPE_MGMT) + return -1; + + switch (conf->type) { + case IEEE80211_IF_TYPE_STA: + case IEEE80211_IF_TYPE_MNTR: + priv->mode = conf->type; + break; + default: + return -EOPNOTSUPP; + } + + priv->mac_addr = conf->mac_addr; + + return 0; +} + +static void adm8211_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct adm8211_priv *priv = dev->priv; + priv->mode = IEEE80211_IF_TYPE_MGMT; +} + +static int adm8211_init_rings(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + struct adm8211_desc *desc = NULL; + struct adm8211_rx_ring_info *rx_info; + struct adm8211_tx_ring_info *tx_info; + unsigned int i; + + for (i = 0; i < priv->rx_ring_size; i++) { + desc = &priv->rx_ring[i]; + desc->status = 0; + desc->length = cpu_to_le32(RX_PKT_SIZE); + priv->rx_buffers[i].skb = NULL; + } + /* Mark the end of RX ring; hw returns to base address after this + * descriptor */ + desc->length |= cpu_to_le32(RDES1_CONTROL_RER); + + for (i = 0; i < priv->rx_ring_size; i++) { + desc = &priv->rx_ring[i]; + rx_info = &priv->rx_buffers[i]; + + rx_info->skb = dev_alloc_skb(RX_PKT_SIZE); + if (rx_info->skb == NULL) + break; + rx_info->mapping = pci_map_single(priv->pdev, + skb_tail_pointer(rx_info->skb), + RX_PKT_SIZE, + PCI_DMA_FROMDEVICE); + desc->buffer1 = cpu_to_le32(rx_info->mapping); + desc->status = cpu_to_le32(RDES0_STATUS_OWN | RDES0_STATUS_SQL); + } + + /* Setup TX ring. TX buffers descriptors will be filled in as needed */ + for (i = 0; i < priv->tx_ring_size; i++) { + desc = &priv->tx_ring[i]; + tx_info = &priv->tx_buffers[i]; + + tx_info->skb = NULL; + tx_info->mapping = 0; + desc->status = 0; + } + desc->length = cpu_to_le32(TDES1_CONTROL_TER); + + priv->cur_rx = priv->cur_tx = priv->dirty_tx = 0; + ADM8211_CSR_WRITE(RDB, priv->rx_ring_dma); + ADM8211_CSR_WRITE(TDBD, priv->tx_ring_dma); + + return 0; +} + +static void adm8211_free_rings(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + unsigned int i; + + for (i = 0; i < priv->rx_ring_size; i++) { + if (!priv->rx_buffers[i].skb) + continue; + + pci_unmap_single( + priv->pdev, + priv->rx_buffers[i].mapping, + RX_PKT_SIZE, PCI_DMA_FROMDEVICE); + + dev_kfree_skb(priv->rx_buffers[i].skb); + } + + for (i = 0; i < priv->tx_ring_size; i++) { + if (!priv->tx_buffers[i].skb) + continue; + + pci_unmap_single(priv->pdev, + priv->tx_buffers[i].mapping, + priv->tx_buffers[i].skb->len, + PCI_DMA_TODEVICE); + + dev_kfree_skb(priv->tx_buffers[i].skb); + } +} + +static int adm8211_open(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + int retval; + + /* Power up MAC and RF chips */ + retval = adm8211_hw_reset(dev); + if (retval) { + printk(KERN_ERR "%s: hardware reset failed\n", + wiphy_name(dev->wiphy)); + goto fail; + } + + retval = adm8211_init_rings(dev); + if (retval) { + printk(KERN_ERR "%s: failed to initialize rings\n", + wiphy_name(dev->wiphy)); + goto fail; + } + + /* Init hardware */ + adm8211_hw_init(dev); + adm8211_rf_set_channel(dev, priv->channel); + + retval = request_irq(priv->pdev->irq, &adm8211_interrupt, + IRQF_SHARED, "adm8211", dev); + if (retval) { + printk(KERN_ERR "%s: failed to register IRQ handler\n", + wiphy_name(dev->wiphy)); + goto fail; + } + + ADM8211_CSR_WRITE(IER, ADM8211_IER_NIE | ADM8211_IER_AIE | + ADM8211_IER_RCIE | ADM8211_IER_TCIE | + ADM8211_IER_TDUIE | ADM8211_IER_GPTIE); + adm8211_update_mode(dev); + ADM8211_CSR_WRITE(RDR, 0); + + adm8211_set_interval(dev, 100, 10); + return 0; + +fail: + return retval; +} + +static int adm8211_stop(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + + priv->nar = 0; + ADM8211_CSR_WRITE(NAR, 0); + ADM8211_CSR_WRITE(IER, 0); + ADM8211_CSR_READ(NAR); + + free_irq(priv->pdev->irq, dev); + + adm8211_free_rings(dev); + return 0; +} + +static void adm8211_calc_durations(int *dur, int *plcp, size_t payload_len, int len, + int plcp_signal, int short_preamble) +{ + /* Alternative calculation from NetBSD: */ + +/* IEEE 802.11b durations for DSSS PHY in microseconds */ +#define IEEE80211_DUR_DS_LONG_PREAMBLE 144 +#define IEEE80211_DUR_DS_SHORT_PREAMBLE 72 +#define IEEE80211_DUR_DS_FAST_PLCPHDR 24 +#define IEEE80211_DUR_DS_SLOW_PLCPHDR 48 +#define IEEE80211_DUR_DS_SLOW_ACK 112 +#define IEEE80211_DUR_DS_FAST_ACK 56 +#define IEEE80211_DUR_DS_SLOW_CTS 112 +#define IEEE80211_DUR_DS_FAST_CTS 56 +#define IEEE80211_DUR_DS_SLOT 20 +#define IEEE80211_DUR_DS_SIFS 10 + + int remainder; + + *dur = (80 * (24 + payload_len) + plcp_signal - 1) + / plcp_signal; + + if (plcp_signal <= PLCP_SIGNAL_2M) + /* 1-2Mbps WLAN: send ACK/CTS at 1Mbps */ + *dur += 3 * (IEEE80211_DUR_DS_SIFS + + IEEE80211_DUR_DS_SHORT_PREAMBLE + + IEEE80211_DUR_DS_FAST_PLCPHDR) + + IEEE80211_DUR_DS_SLOW_CTS + IEEE80211_DUR_DS_SLOW_ACK; + else + /* 5-11Mbps WLAN: send ACK/CTS at 2Mbps */ + *dur += 3 * (IEEE80211_DUR_DS_SIFS + + IEEE80211_DUR_DS_SHORT_PREAMBLE + + IEEE80211_DUR_DS_FAST_PLCPHDR) + + IEEE80211_DUR_DS_FAST_CTS + IEEE80211_DUR_DS_FAST_ACK; + + /* lengthen duration if long preamble */ + if (!short_preamble) + *dur += 3 * (IEEE80211_DUR_DS_LONG_PREAMBLE - + IEEE80211_DUR_DS_SHORT_PREAMBLE) + + 3 * (IEEE80211_DUR_DS_SLOW_PLCPHDR - + IEEE80211_DUR_DS_FAST_PLCPHDR); + + + *plcp = (80 * len) / plcp_signal; + remainder = (80 * len) % plcp_signal; + if (plcp_signal == PLCP_SIGNAL_11M && + remainder <= 30 && remainder > 0) + *plcp = (*plcp | 0x8000) + 1; + else if (remainder) + (*plcp)++; +} + +/* Transmit skb w/adm8211_tx_hdr (802.11 header created by hardware) */ +static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb, + u16 plcp_signal, + struct ieee80211_tx_control *control, + size_t hdrlen) +{ + struct adm8211_priv *priv = dev->priv; + unsigned long flags; + dma_addr_t mapping; + unsigned int entry; + u32 flag; + + mapping = pci_map_single(priv->pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + + spin_lock_irqsave(&priv->lock, flags); + + if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size / 2) + flag = TDES1_CONTROL_IC | TDES1_CONTROL_LS | TDES1_CONTROL_FS; + else + flag = TDES1_CONTROL_LS | TDES1_CONTROL_FS; + + if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size - 2) + ieee80211_stop_queue(dev, 0); + + entry = priv->cur_tx % priv->tx_ring_size; + + priv->tx_buffers[entry].skb = skb; + priv->tx_buffers[entry].mapping = mapping; + memcpy(&priv->tx_buffers[entry].tx_control, control, sizeof(*control)); + priv->tx_buffers[entry].hdrlen = hdrlen; + priv->tx_ring[entry].buffer1 = cpu_to_le32(mapping); + + if (entry == priv->tx_ring_size - 1) + flag |= TDES1_CONTROL_TER; + priv->tx_ring[entry].length = cpu_to_le32(flag | skb->len); + + /* Set TX rate (SIGNAL field in PLCP PPDU format) */ + flag = TDES0_CONTROL_OWN | (plcp_signal << 20) | 8 /* ? */; + priv->tx_ring[entry].status = cpu_to_le32(flag); + + priv->cur_tx++; + + spin_unlock_irqrestore(&priv->lock, flags); + + /* Trigger transmit poll */ + ADM8211_CSR_WRITE(TDR, 0); +} + +/* Put adm8211_tx_hdr on skb and transmit */ +static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct adm8211_tx_hdr *txhdr; + u16 fc; + size_t payload_len, hdrlen; + int plcp, dur, len, plcp_signal, short_preamble; + struct ieee80211_hdr *hdr; + + if (control->tx_rate < 0) { + short_preamble = 1; + plcp_signal = -control->tx_rate; + } else { + short_preamble = 0; + plcp_signal = control->tx_rate; + } + + hdr = (struct ieee80211_hdr *)skb->data; + fc = le16_to_cpu(hdr->frame_control) & ~IEEE80211_FCTL_PROTECTED; + hdrlen = ieee80211_get_hdrlen(fc); + memcpy(skb->cb, skb->data, hdrlen); + hdr = (struct ieee80211_hdr *)skb->cb; + skb_pull(skb, hdrlen); + payload_len = skb->len; + + txhdr = (struct adm8211_tx_hdr *) skb_push(skb, sizeof(*txhdr)); + memset(txhdr, 0, sizeof(*txhdr)); + memcpy(txhdr->da, ieee80211_get_DA(hdr), ETH_ALEN); + txhdr->signal = plcp_signal; + txhdr->frame_body_size = cpu_to_le16(payload_len); + txhdr->frame_control = hdr->frame_control; + + len = hdrlen + payload_len + FCS_LEN; + if (fc & IEEE80211_FCTL_PROTECTED) + len += 8; + + txhdr->frag = cpu_to_le16(0x0FFF); + adm8211_calc_durations(&dur, &plcp, payload_len, + len, plcp_signal, short_preamble); + txhdr->plcp_frag_head_len = cpu_to_le16(plcp); + txhdr->plcp_frag_tail_len = cpu_to_le16(plcp); + txhdr->dur_frag_head = cpu_to_le16(dur); + txhdr->dur_frag_tail = cpu_to_le16(dur); + + txhdr->header_control = cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER); + + if (short_preamble) + txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE); + + if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) + txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS); + + if (fc & IEEE80211_FCTL_PROTECTED) + txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_WEP_ENGINE); + + txhdr->retry_limit = control->retry_limit; + + adm8211_tx_raw(dev, skb, plcp_signal, control, hdrlen); + + return NETDEV_TX_OK; +} + +static int adm8211_alloc_rings(struct ieee80211_hw *dev) +{ + struct adm8211_priv *priv = dev->priv; + unsigned int ring_size; + + priv->rx_buffers = kmalloc(sizeof(*priv->rx_buffers) * priv->rx_ring_size + + sizeof(*priv->tx_buffers) * priv->tx_ring_size, GFP_KERNEL); + if (!priv->rx_buffers) + return -ENOMEM; + + priv->tx_buffers = (void *)priv->rx_buffers + + sizeof(*priv->rx_buffers) * priv->rx_ring_size; + + /* Allocate TX/RX descriptors */ + ring_size = sizeof(struct adm8211_desc) * priv->rx_ring_size + + sizeof(struct adm8211_desc) * priv->tx_ring_size; + priv->rx_ring = pci_alloc_consistent(priv->pdev, ring_size, + &priv->rx_ring_dma); + + if (!priv->rx_ring) { + kfree(priv->rx_buffers); + priv->rx_buffers = NULL; + priv->tx_buffers = NULL; + return -ENOMEM; + } + + priv->tx_ring = (struct adm8211_desc *)(priv->rx_ring + + priv->rx_ring_size); + priv->tx_ring_dma = priv->rx_ring_dma + + sizeof(struct adm8211_desc) * priv->rx_ring_size; + + return 0; +} + +static const struct ieee80211_ops adm8211_ops = { + .tx = adm8211_tx, + .open = adm8211_open, + .stop = adm8211_stop, + .add_interface = adm8211_add_interface, + .remove_interface = adm8211_remove_interface, + .config = adm8211_config, + .config_interface = adm8211_config_interface, + .set_multicast_list = adm8211_set_rx_mode, + .get_stats = adm8211_get_stats, + .get_tx_stats = adm8211_get_tx_stats, + .get_tsf = adm8211_get_tsft +}; + +static int __devinit adm8211_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct ieee80211_hw *dev; + struct adm8211_priv *priv; + unsigned long mem_addr, mem_len; + unsigned int io_addr, io_len; + int err; + u32 reg; + u8 perm_addr[ETH_ALEN]; + +#ifndef MODULE + static unsigned int cardidx; + if (!cardidx++) + printk(version); +#endif + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s (adm8211): Cannot enable new PCI device\n", + pci_name(pdev)); + return err; + } + + io_addr = pci_resource_start(pdev, 0); + io_len = pci_resource_len(pdev, 0); + mem_addr = pci_resource_start(pdev, 1); + mem_len = pci_resource_len(pdev, 1); + if (io_len < 256 || mem_len < 1024) { + printk(KERN_ERR "%s (adm8211): Too short PCI resources\n", + pci_name(pdev)); + goto err_disable_pdev; + } + + + /* check signature */ + pci_read_config_dword(pdev, 0x80 /* CR32 */, ®); + if (reg != ADM8211_SIG1 && reg != ADM8211_SIG2) { + printk(KERN_ERR "%s (adm8211): Invalid signature (0x%x)\n", + pci_name(pdev), reg); + goto err_disable_pdev; + } + + err = pci_request_regions(pdev, "adm8211"); + if (err) { + printk(KERN_ERR "%s (adm8211): Cannot obtain PCI resources\n", + pci_name(pdev)); + return err; /* someone else grabbed it? don't disable it */ + } + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || + pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + printk(KERN_ERR "%s (adm8211): No suitable DMA available\n", + pci_name(pdev)); + goto err_free_reg; + } + + pci_set_master(pdev); + + dev = ieee80211_alloc_hw(sizeof(*priv), &adm8211_ops); + if (!dev) { + printk(KERN_ERR "%s (adm8211): ieee80211 alloc failed\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + priv = dev->priv; + priv->pdev = pdev; + + spin_lock_init(&priv->lock); + + SET_IEEE80211_DEV(dev, &pdev->dev); + + pci_set_drvdata(pdev, dev); + + priv->map = pci_iomap(pdev, 1, mem_len); + if (!priv->map) + priv->map = pci_iomap(pdev, 0, io_len); + + if (!priv->map) { + printk(KERN_ERR "%s (adm8211): Cannot map device memory\n", + pci_name(pdev)); + goto err_free_dev; + } + + priv->rx_ring_size = rx_ring_size; + priv->tx_ring_size = tx_ring_size; + + if (adm8211_alloc_rings(dev)) { + printk(KERN_ERR "%s (adm8211): Cannot allocate TX/RX ring\n", + pci_name(pdev)); + goto err_iounmap; + } + + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &priv->revid); + + *(u32 *)perm_addr = le32_to_cpu((__force __le32)ADM8211_CSR_READ(PAR0)); + *(u16 *)&perm_addr[4] = + le16_to_cpu((__force __le16)ADM8211_CSR_READ(PAR1) & 0xFFFF); + + if (!is_valid_ether_addr(perm_addr)) { + printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n", + pci_name(pdev)); + random_ether_addr(perm_addr); + } + SET_IEEE80211_PERM_ADDR(dev, perm_addr); + + dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr); + dev->flags = IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED; + /* IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */ + + dev->channel_change_time = 1000; + dev->max_rssi = 100; /* FIXME: find better value */ + + priv->modes[0].mode = MODE_IEEE80211B; + /* channel info filled in by adm8211_read_eeprom */ + memcpy(priv->rates, adm8211_rates, sizeof(adm8211_rates)); + priv->modes[0].num_rates = ARRAY_SIZE(adm8211_rates); + priv->modes[0].rates = priv->rates; + + dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */ + + priv->retry_limit = 3; + priv->ant_power = 0x40; + priv->tx_power = 0x40; + priv->lpf_cutoff = 0xFF; + priv->lnags_threshold = 0xFF; + priv->mode = IEEE80211_IF_TYPE_MGMT; + + /* Power-on issue. EEPROM won't read correctly without */ + if (priv->revid >= ADM8211_REV_BA) { + ADM8211_CSR_WRITE(FRCTL, 0); + ADM8211_CSR_READ(FRCTL); + ADM8211_CSR_WRITE(FRCTL, 1); + ADM8211_CSR_READ(FRCTL); + msleep(100); + } + + err = adm8211_read_eeprom(dev); + if (err) { + printk(KERN_ERR "%s (adm8211): Can't alloc eeprom buffer\n", + pci_name(pdev)); + goto err_free_desc; + } + + priv->channel = priv->modes[0].channels[0].chan; + + err = ieee80211_register_hwmode(dev, &priv->modes[0]); + if (err) { + printk(KERN_ERR "%s (adm8211): Can't register hwmode\n", + pci_name(pdev)); + goto err_free_desc; + } + + err = ieee80211_register_hw(dev); + if (err) { + printk(KERN_ERR "%s (adm8211): Cannot register device\n", + pci_name(pdev)); + goto err_free_desc; + } + + printk(KERN_INFO "%s: hwaddr " MAC_FMT ", Rev 0x%02x\n", + wiphy_name(dev->wiphy), MAC_ARG(dev->wiphy->perm_addr), + priv->revid); + + return 0; + + err_free_desc: + pci_free_consistent(pdev, + sizeof(struct adm8211_desc) * priv->rx_ring_size + + sizeof(struct adm8211_desc) * priv->tx_ring_size, + priv->rx_ring, priv->rx_ring_dma); + kfree(priv->rx_buffers); + + err_iounmap: + pci_iounmap(pdev, priv->map); + + err_free_dev: + pci_set_drvdata(pdev, NULL); + ieee80211_free_hw(dev); + + err_free_reg: + pci_release_regions(pdev); + + err_disable_pdev: + pci_disable_device(pdev); + return err; +} + + +static void __devexit adm8211_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct adm8211_priv *priv; + + if (!dev) + return; + + ieee80211_unregister_hw(dev); + + priv = dev->priv; + + pci_free_consistent(pdev, + sizeof(struct adm8211_desc) * priv->rx_ring_size + + sizeof(struct adm8211_desc) * priv->tx_ring_size, + priv->rx_ring, priv->rx_ring_dma); + + kfree(priv->rx_buffers); + kfree(priv->eeprom); + pci_iounmap(pdev, priv->map); + pci_release_regions(pdev); + pci_disable_device(pdev); + ieee80211_free_hw(dev); +} + + +#ifdef CONFIG_PM +static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct adm8211_priv *priv = dev->priv; + + if (priv->mode != IEEE80211_IF_TYPE_MGMT) { + ieee80211_stop_queues(dev); + adm8211_stop(dev); + } + + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +static int adm8211_resume(struct pci_dev *pdev) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct adm8211_priv *priv = dev->priv; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + if (priv->mode != IEEE80211_IF_TYPE_MGMT) { + adm8211_open(dev); + ieee80211_start_queues(dev); + } + + return 0; +} +#endif /* CONFIG_PM */ + + +MODULE_DEVICE_TABLE(pci, adm8211_pci_id_table); + +/* TODO: implement enable_wake */ +static struct pci_driver adm8211_driver = { + .name = "adm8211", + .id_table = adm8211_pci_id_table, + .probe = adm8211_probe, + .remove = __devexit_p(adm8211_remove), +#ifdef CONFIG_PM + .suspend = adm8211_suspend, + .resume = adm8211_resume, +#endif /* CONFIG_PM */ +}; + + + +static int __init adm8211_init(void) +{ +#ifdef MODULE + printk(version); +#endif + + return pci_register_driver(&adm8211_driver); +} + + +static void __exit adm8211_exit(void) +{ + pci_unregister_driver(&adm8211_driver); +} + + +module_init(adm8211_init); +module_exit(adm8211_exit); diff --git a/drivers/net/wireless/adm8211.h b/drivers/net/wireless/adm8211.h new file mode 100644 index 0000000000..795d895f5c --- /dev/null +++ b/drivers/net/wireless/adm8211.h @@ -0,0 +1,659 @@ +#ifndef ADM8211_H +#define ADM8211_H + +/* ADM8211 Registers */ + +/* CR32 (SIG) signature */ +#define ADM8211_SIG1 0x82011317 /* ADM8211A */ +#define ADM8211_SIG2 0x82111317 /* ADM8211B/ADM8211C */ + +#define ADM8211_CSR_READ(r) ioread32(&priv->map->r) +#define ADM8211_CSR_WRITE(r, val) iowrite32((val), &priv->map->r) + +/* CSR (Host Control and Status Registers) */ +struct adm8211_csr { + __le32 PAR; /* 0x00 CSR0 */ + __le32 FRCTL; /* 0x04 CSR0A */ + __le32 TDR; /* 0x08 CSR1 */ + __le32 WTDP; /* 0x0C CSR1A */ + __le32 RDR; /* 0x10 CSR2 */ + __le32 WRDP; /* 0x14 CSR2A */ + __le32 RDB; /* 0x18 CSR3 */ + __le32 TDBH; /* 0x1C CSR3A */ + __le32 TDBD; /* 0x20 CSR4 */ + __le32 TDBP; /* 0x24 CSR4A */ + __le32 STSR; /* 0x28 CSR5 */ + __le32 TDBB; /* 0x2C CSR5A */ + __le32 NAR; /* 0x30 CSR6 */ + __le32 CSR6A; /* reserved */ + __le32 IER; /* 0x38 CSR7 */ + __le32 TKIPSCEP; /* 0x3C CSR7A */ + __le32 LPC; /* 0x40 CSR8 */ + __le32 CSR_TEST1; /* 0x44 CSR8A */ + __le32 SPR; /* 0x48 CSR9 */ + __le32 CSR_TEST0; /* 0x4C CSR9A */ + __le32 WCSR; /* 0x50 CSR10 */ + __le32 WPDR; /* 0x54 CSR10A */ + __le32 GPTMR; /* 0x58 CSR11 */ + __le32 GPIO; /* 0x5C CSR11A */ + __le32 BBPCTL; /* 0x60 CSR12 */ + __le32 SYNCTL; /* 0x64 CSR12A */ + __le32 PLCPHD; /* 0x68 CSR13 */ + __le32 MMIWA; /* 0x6C CSR13A */ + __le32 MMIRD0; /* 0x70 CSR14 */ + __le32 MMIRD1; /* 0x74 CSR14A */ + __le32 TXBR; /* 0x78 CSR15 */ + __le32 SYNDATA; /* 0x7C CSR15A */ + __le32 ALCS; /* 0x80 CSR16 */ + __le32 TOFS2; /* 0x84 CSR17 */ + __le32 CMDR; /* 0x88 CSR18 */ + __le32 PCIC; /* 0x8C CSR19 */ + __le32 PMCSR; /* 0x90 CSR20 */ + __le32 PAR0; /* 0x94 CSR21 */ + __le32 PAR1; /* 0x98 CSR22 */ + __le32 MAR0; /* 0x9C CSR23 */ + __le32 MAR1; /* 0xA0 CSR24 */ + __le32 ATIMDA0; /* 0xA4 CSR25 */ + __le32 ABDA1; /* 0xA8 CSR26 */ + __le32 BSSID0; /* 0xAC CSR27 */ + __le32 TXLMT; /* 0xB0 CSR28 */ + __le32 MIBCNT; /* 0xB4 CSR29 */ + __le32 BCNT; /* 0xB8 CSR30 */ + __le32 TSFTH; /* 0xBC CSR31 */ + __le32 TSC; /* 0xC0 CSR32 */ + __le32 SYNRF; /* 0xC4 CSR33 */ + __le32 BPLI; /* 0xC8 CSR34 */ + __le32 CAP0; /* 0xCC CSR35 */ + __le32 CAP1; /* 0xD0 CSR36 */ + __le32 RMD; /* 0xD4 CSR37 */ + __le32 CFPP; /* 0xD8 CSR38 */ + __le32 TOFS0; /* 0xDC CSR39 */ + __le32 TOFS1; /* 0xE0 CSR40 */ + __le32 IFST; /* 0xE4 CSR41 */ + __le32 RSPT; /* 0xE8 CSR42 */ + __le32 TSFTL; /* 0xEC CSR43 */ + __le32 WEPCTL; /* 0xF0 CSR44 */ + __le32 WESK; /* 0xF4 CSR45 */ + __le32 WEPCNT; /* 0xF8 CSR46 */ + __le32 MACTEST; /* 0xFC CSR47 */ + __le32 FER; /* 0x100 */ + __le32 FEMR; /* 0x104 */ + __le32 FPSR; /* 0x108 */ + __le32 FFER; /* 0x10C */ +} __attribute__ ((packed)); + +/* CSR0 - PAR (PCI Address Register) */ +#define ADM8211_PAR_MWIE (1 << 24) +#define ADM8211_PAR_MRLE (1 << 23) +#define ADM8211_PAR_MRME (1 << 21) +#define ADM8211_PAR_RAP ((1 << 18) | (1 << 17)) +#define ADM8211_PAR_CAL ((1 << 15) | (1 << 14)) +#define ADM8211_PAR_PBL 0x00003f00 +#define ADM8211_PAR_BLE (1 << 7) +#define ADM8211_PAR_DSL 0x0000007c +#define ADM8211_PAR_BAR (1 << 1) +#define ADM8211_PAR_SWR (1 << 0) + +/* CSR1 - FRCTL (Frame Control Register) */ +#define ADM8211_FRCTL_PWRMGT (1 << 31) +#define ADM8211_FRCTL_MAXPSP (1 << 27) +#define ADM8211_FRCTL_DRVPRSP (1 << 26) +#define ADM8211_FRCTL_DRVBCON (1 << 25) +#define ADM8211_FRCTL_AID 0x0000ffff +#define ADM8211_FRCTL_AID_ON 0x0000c000 + +/* CSR5 - STSR (Status Register) */ +#define ADM8211_STSR_PCF (1 << 31) +#define ADM8211_STSR_BCNTC (1 << 30) +#define ADM8211_STSR_GPINT (1 << 29) +#define ADM8211_STSR_LinkOff (1 << 28) +#define ADM8211_STSR_ATIMTC (1 << 27) +#define ADM8211_STSR_TSFTF (1 << 26) +#define ADM8211_STSR_TSCZ (1 << 25) +#define ADM8211_STSR_LinkOn (1 << 24) +#define ADM8211_STSR_SQL (1 << 23) +#define ADM8211_STSR_WEPTD (1 << 22) +#define ADM8211_STSR_ATIME (1 << 21) +#define ADM8211_STSR_TBTT (1 << 20) +#define ADM8211_STSR_NISS (1 << 16) +#define ADM8211_STSR_AISS (1 << 15) +#define ADM8211_STSR_TEIS (1 << 14) +#define ADM8211_STSR_FBE (1 << 13) +#define ADM8211_STSR_REIS (1 << 12) +#define ADM8211_STSR_GPTT (1 << 11) +#define ADM8211_STSR_RPS (1 << 8) +#define ADM8211_STSR_RDU (1 << 7) +#define ADM8211_STSR_RCI (1 << 6) +#define ADM8211_STSR_TUF (1 << 5) +#define ADM8211_STSR_TRT (1 << 4) +#define ADM8211_STSR_TLT (1 << 3) +#define ADM8211_STSR_TDU (1 << 2) +#define ADM8211_STSR_TPS (1 << 1) +#define ADM8211_STSR_TCI (1 << 0) + +/* CSR6 - NAR (Network Access Register) */ +#define ADM8211_NAR_TXCF (1 << 31) +#define ADM8211_NAR_HF (1 << 30) +#define ADM8211_NAR_UTR (1 << 29) +#define ADM8211_NAR_SQ (1 << 28) +#define ADM8211_NAR_CFP (1 << 27) +#define ADM8211_NAR_SF (1 << 21) +#define ADM8211_NAR_TR ((1 << 15) | (1 << 14)) +#define ADM8211_NAR_ST (1 << 13) +#define ADM8211_NAR_OM ((1 << 11) | (1 << 10)) +#define ADM8211_NAR_MM (1 << 7) +#define ADM8211_NAR_PR (1 << 6) +#define ADM8211_NAR_EA (1 << 5) +#define ADM8211_NAR_PB (1 << 3) +#define ADM8211_NAR_STPDMA (1 << 2) +#define ADM8211_NAR_SR (1 << 1) +#define ADM8211_NAR_CTX (1 << 0) + +#define ADM8211_IDLE() \ +do { \ + if (priv->nar & (ADM8211_NAR_SR | ADM8211_NAR_ST)) { \ + ADM8211_CSR_WRITE(NAR, priv->nar & \ + ~(ADM8211_NAR_SR | ADM8211_NAR_ST));\ + ADM8211_CSR_READ(NAR); \ + msleep(20); \ + } \ +} while (0) + +#define ADM8211_IDLE_RX() \ +do { \ + if (priv->nar & ADM8211_NAR_SR) { \ + ADM8211_CSR_WRITE(NAR, priv->nar & ~ADM8211_NAR_SR); \ + ADM8211_CSR_READ(NAR); \ + mdelay(20); \ + } \ +} while (0) + +#define ADM8211_RESTORE() \ +do { \ + if (priv->nar & (ADM8211_NAR_SR | ADM8211_NAR_ST)) \ + ADM8211_CSR_WRITE(NAR, priv->nar); \ +} while (0) + +/* CSR7 - IER (Interrupt Enable Register) */ +#define ADM8211_IER_PCFIE (1 << 31) +#define ADM8211_IER_BCNTCIE (1 << 30) +#define ADM8211_IER_GPIE (1 << 29) +#define ADM8211_IER_LinkOffIE (1 << 28) +#define ADM8211_IER_ATIMTCIE (1 << 27) +#define ADM8211_IER_TSFTFIE (1 << 26) +#define ADM8211_IER_TSCZE (1 << 25) +#define ADM8211_IER_LinkOnIE (1 << 24) +#define ADM8211_IER_SQLIE (1 << 23) +#define ADM8211_IER_WEPIE (1 << 22) +#define ADM8211_IER_ATIMEIE (1 << 21) +#define ADM8211_IER_TBTTIE (1 << 20) +#define ADM8211_IER_NIE (1 << 16) +#define ADM8211_IER_AIE (1 << 15) +#define ADM8211_IER_TEIE (1 << 14) +#define ADM8211_IER_FBEIE (1 << 13) +#define ADM8211_IER_REIE (1 << 12) +#define ADM8211_IER_GPTIE (1 << 11) +#define ADM8211_IER_RSIE (1 << 8) +#define ADM8211_IER_RUIE (1 << 7) +#define ADM8211_IER_RCIE (1 << 6) +#define ADM8211_IER_TUIE (1 << 5) +#define ADM8211_IER_TRTIE (1 << 4) +#define ADM8211_IER_TLTTIE (1 << 3) +#define ADM8211_IER_TDUIE (1 << 2) +#define ADM8211_IER_TPSIE (1 << 1) +#define ADM8211_IER_TCIE (1 << 0) + +/* CSR9 - SPR (Serial Port Register) */ +#define ADM8211_SPR_SRS (1 << 11) +#define ADM8211_SPR_SDO (1 << 3) +#define ADM8211_SPR_SDI (1 << 2) +#define ADM8211_SPR_SCLK (1 << 1) +#define ADM8211_SPR_SCS (1 << 0) + +/* CSR9A - CSR_TEST0 */ +#define ADM8211_CSR_TEST0_EPNE (1 << 18) +#define ADM8211_CSR_TEST0_EPSNM (1 << 17) +#define ADM8211_CSR_TEST0_EPTYP (1 << 16) +#define ADM8211_CSR_TEST0_EPRLD (1 << 15) + +/* CSR10 - WCSR (Wake-up Control/Status Register) */ +#define ADM8211_WCSR_CRCT (1 << 30) +#define ADM8211_WCSR_TSFTWE (1 << 20) +#define ADM8211_WCSR_TIMWE (1 << 19) +#define ADM8211_WCSR_ATIMWE (1 << 18) +#define ADM8211_WCSR_KEYWE (1 << 17) +#define ADM8211_WCSR_MPRE (1 << 9) +#define ADM8211_WCSR_LSOE (1 << 8) +#define ADM8211_WCSR_KEYUP (1 << 6) +#define ADM8211_WCSR_TSFTW (1 << 5) +#define ADM8211_WCSR_TIMW (1 << 4) +#define ADM8211_WCSR_ATIMW (1 << 3) +#define ADM8211_WCSR_MPR (1 << 1) +#define ADM8211_WCSR_LSO (1 << 0) + +/* CSR11A - GPIO */ +#define ADM8211_CSR_GPIO_EN5 (1 << 17) +#define ADM8211_CSR_GPIO_EN4 (1 << 16) +#define ADM8211_CSR_GPIO_EN3 (1 << 15) +#define ADM8211_CSR_GPIO_EN2 (1 << 14) +#define ADM8211_CSR_GPIO_EN1 (1 << 13) +#define ADM8211_CSR_GPIO_EN0 (1 << 12) +#define ADM8211_CSR_GPIO_O5 (1 << 11) +#define ADM8211_CSR_GPIO_O4 (1 << 10) +#define ADM8211_CSR_GPIO_O3 (1 << 9) +#define ADM8211_CSR_GPIO_O2 (1 << 8) +#define ADM8211_CSR_GPIO_O1 (1 << 7) +#define ADM8211_CSR_GPIO_O0 (1 << 6) +#define ADM8211_CSR_GPIO_IN 0x0000003f + +/* CSR12 - BBPCTL (BBP Control port) */ +#define ADM8211_BBPCTL_MMISEL (1 << 31) +#define ADM8211_BBPCTL_SPICADD (0x7F << 24) +#define ADM8211_BBPCTL_RF3000 (0x20 << 24) +#define ADM8211_BBPCTL_TXCE (1 << 23) +#define ADM8211_BBPCTL_RXCE (1 << 22) +#define ADM8211_BBPCTL_CCAP (1 << 21) +#define ADM8211_BBPCTL_TYPE 0x001c0000 +#define ADM8211_BBPCTL_WR (1 << 17) +#define ADM8211_BBPCTL_RD (1 << 16) +#define ADM8211_BBPCTL_ADDR 0x0000ff00 +#define ADM8211_BBPCTL_DATA 0x000000ff + +/* CSR12A - SYNCTL (Synthesizer Control port) */ +#define ADM8211_SYNCTL_WR (1 << 31) +#define ADM8211_SYNCTL_RD (1 << 30) +#define ADM8211_SYNCTL_CS0 (1 << 29) +#define ADM8211_SYNCTL_CS1 (1 << 28) +#define ADM8211_SYNCTL_CAL (1 << 27) +#define ADM8211_SYNCTL_SELCAL (1 << 26) +#define ADM8211_SYNCTL_RFtype ((1 << 24) || (1 << 23) || (1 << 22)) +#define ADM8211_SYNCTL_RFMD (1 << 22) +#define ADM8211_SYNCTL_GENERAL (0x7 << 22) +/* SYNCTL 21:0 Data (Si4126: 18-bit data, 4-bit address) */ + +/* CSR18 - CMDR (Command Register) */ +#define ADM8211_CMDR_PM (1 << 19) +#define ADM8211_CMDR_APM (1 << 18) +#define ADM8211_CMDR_RTE (1 << 4) +#define ADM8211_CMDR_DRT ((1 << 3) | (1 << 2)) +#define ADM8211_CMDR_DRT_8DW (0x0 << 2) +#define ADM8211_CMDR_DRT_16DW (0x1 << 2) +#define ADM8211_CMDR_DRT_SF (0x2 << 2) + +/* CSR33 - SYNRF (SYNRF direct control) */ +#define ADM8211_SYNRF_SELSYN (1 << 31) +#define ADM8211_SYNRF_SELRF (1 << 30) +#define ADM8211_SYNRF_LERF (1 << 29) +#define ADM8211_SYNRF_LEIF (1 << 28) +#define ADM8211_SYNRF_SYNCLK (1 << 27) +#define ADM8211_SYNRF_SYNDATA (1 << 26) +#define ADM8211_SYNRF_PE1 (1 << 25) +#define ADM8211_SYNRF_PE2 (1 << 24) +#define ADM8211_SYNRF_PA_PE (1 << 23) +#define ADM8211_SYNRF_TR_SW (1 << 22) +#define ADM8211_SYNRF_TR_SWN (1 << 21) +#define ADM8211_SYNRF_RADIO (1 << 20) +#define ADM8211_SYNRF_CAL_EN (1 << 19) +#define ADM8211_SYNRF_PHYRST (1 << 18) + +#define ADM8211_SYNRF_IF_SELECT_0 (1 << 31) +#define ADM8211_SYNRF_IF_SELECT_1 ((1 << 31) | (1 << 28)) +#define ADM8211_SYNRF_WRITE_SYNDATA_0 (1 << 31) +#define ADM8211_SYNRF_WRITE_SYNDATA_1 ((1 << 31) | (1 << 26)) +#define ADM8211_SYNRF_WRITE_CLOCK_0 (1 << 31) +#define ADM8211_SYNRF_WRITE_CLOCK_1 ((1 << 31) | (1 << 27)) + +/* CSR44 - WEPCTL (WEP Control) */ +#define ADM8211_WEPCTL_WEPENABLE (1 << 31) +#define ADM8211_WEPCTL_WPAENABLE (1 << 30) +#define ADM8211_WEPCTL_CURRENT_TABLE (1 << 29) +#define ADM8211_WEPCTL_TABLE_WR (1 << 28) +#define ADM8211_WEPCTL_TABLE_RD (1 << 27) +#define ADM8211_WEPCTL_WEPRXBYP (1 << 25) +#define ADM8211_WEPCTL_SEL_WEPTABLE (1 << 23) +#define ADM8211_WEPCTL_ADDR (0x000001ff) + +/* CSR45 - WESK (Data Entry for Share/Individual Key) */ +#define ADM8211_WESK_DATA (0x0000ffff) + +/* FER (Function Event Register) */ +#define ADM8211_FER_INTR_EV_ENT (1 << 15) + + +/* Si4126 RF Synthesizer - Control Registers */ +#define SI4126_MAIN_CONF 0 +#define SI4126_PHASE_DET_GAIN 1 +#define SI4126_POWERDOWN 2 +#define SI4126_RF1_N_DIV 3 /* only Si4136 */ +#define SI4126_RF2_N_DIV 4 +#define SI4126_IF_N_DIV 5 +#define SI4126_RF1_R_DIV 6 /* only Si4136 */ +#define SI4126_RF2_R_DIV 7 +#define SI4126_IF_R_DIV 8 + +/* Main Configuration */ +#define SI4126_MAIN_XINDIV2 (1 << 6) +#define SI4126_MAIN_IFDIV ((1 << 11) | (1 << 10)) +/* Powerdown */ +#define SI4126_POWERDOWN_PDIB (1 << 1) +#define SI4126_POWERDOWN_PDRB (1 << 0) + + +/* RF3000 BBP - Control Port Registers */ +/* 0x00 - reserved */ +#define RF3000_MODEM_CTRL__RX_STATUS 0x01 +#define RF3000_CCA_CTRL 0x02 +#define RF3000_DIVERSITY__RSSI 0x03 +#define RF3000_RX_SIGNAL_FIELD 0x04 +#define RF3000_RX_LEN_MSB 0x05 +#define RF3000_RX_LEN_LSB 0x06 +#define RF3000_RX_SERVICE_FIELD 0x07 +#define RF3000_TX_VAR_GAIN__TX_LEN_EXT 0x11 +#define RF3000_TX_LEN_MSB 0x12 +#define RF3000_TX_LEN_LSB 0x13 +#define RF3000_LOW_GAIN_CALIB 0x14 +#define RF3000_HIGH_GAIN_CALIB 0x15 + +/* ADM8211 revisions */ +#define ADM8211_REV_AB 0x11 +#define ADM8211_REV_AF 0x15 +#define ADM8211_REV_BA 0x20 +#define ADM8211_REV_CA 0x30 + +struct adm8211_desc { + __le32 status; + __le32 length; + __le32 buffer1; + __le32 buffer2; +}; + +#define RDES0_STATUS_OWN (1 << 31) +#define RDES0_STATUS_ES (1 << 30) +#define RDES0_STATUS_SQL (1 << 29) +#define RDES0_STATUS_DE (1 << 28) +#define RDES0_STATUS_FS (1 << 27) +#define RDES0_STATUS_LS (1 << 26) +#define RDES0_STATUS_PCF (1 << 25) +#define RDES0_STATUS_SFDE (1 << 24) +#define RDES0_STATUS_SIGE (1 << 23) +#define RDES0_STATUS_CRC16E (1 << 22) +#define RDES0_STATUS_RXTOE (1 << 21) +#define RDES0_STATUS_CRC32E (1 << 20) +#define RDES0_STATUS_ICVE (1 << 19) +#define RDES0_STATUS_DA1 (1 << 17) +#define RDES0_STATUS_DA0 (1 << 16) +#define RDES0_STATUS_RXDR ((1 << 15) | (1 << 14) | (1 << 13) | (1 << 12)) +#define RDES0_STATUS_FL (0x00000fff) + +#define RDES1_CONTROL_RER (1 << 25) +#define RDES1_CONTROL_RCH (1 << 24) +#define RDES1_CONTROL_RBS2 (0x00fff000) +#define RDES1_CONTROL_RBS1 (0x00000fff) + +#define RDES1_STATUS_RSSI (0x0000007f) + + +#define TDES0_CONTROL_OWN (1 << 31) +#define TDES0_CONTROL_DONE (1 << 30) +#define TDES0_CONTROL_TXDR (0x0ff00000) + +#define TDES0_STATUS_OWN (1 << 31) +#define TDES0_STATUS_DONE (1 << 30) +#define TDES0_STATUS_ES (1 << 29) +#define TDES0_STATUS_TLT (1 << 28) +#define TDES0_STATUS_TRT (1 << 27) +#define TDES0_STATUS_TUF (1 << 26) +#define TDES0_STATUS_TRO (1 << 25) +#define TDES0_STATUS_SOFBR (1 << 24) +#define TDES0_STATUS_ACR (0x00000fff) + +#define TDES1_CONTROL_IC (1 << 31) +#define TDES1_CONTROL_LS (1 << 30) +#define TDES1_CONTROL_FS (1 << 29) +#define TDES1_CONTROL_TER (1 << 25) +#define TDES1_CONTROL_TCH (1 << 24) +#define TDES1_CONTROL_RBS2 (0x00fff000) +#define TDES1_CONTROL_RBS1 (0x00000fff) + +/* SRAM offsets */ +#define ADM8211_SRAM(x) (priv->revid < ADM8211_REV_BA ? \ + ADM8211_SRAM_A_ ## x : ADM8211_SRAM_B_ ## x) + +#define ADM8211_SRAM_INDIV_KEY 0x0000 +#define ADM8211_SRAM_A_SHARE_KEY 0x0160 +#define ADM8211_SRAM_B_SHARE_KEY 0x00c0 + +#define ADM8211_SRAM_A_SSID 0x0180 +#define ADM8211_SRAM_B_SSID 0x00d4 +#define ADM8211_SRAM_SSID ADM8211_SRAM(SSID) + +#define ADM8211_SRAM_A_SUPP_RATE 0x0191 +#define ADM8211_SRAM_B_SUPP_RATE 0x00dd +#define ADM8211_SRAM_SUPP_RATE ADM8211_SRAM(SUPP_RATE) + +#define ADM8211_SRAM_A_SIZE 0x0200 +#define ADM8211_SRAM_B_SIZE 0x01c0 +#define ADM8211_SRAM_SIZE ADM8211_SRAM(SIZE) + +struct adm8211_rx_ring_info { + struct sk_buff *skb; + dma_addr_t mapping; +}; + +struct adm8211_tx_ring_info { + struct sk_buff *skb; + dma_addr_t mapping; + struct ieee80211_tx_control tx_control; + size_t hdrlen; +}; + +#define PLCP_SIGNAL_1M 0x0a +#define PLCP_SIGNAL_2M 0x14 +#define PLCP_SIGNAL_5M5 0x37 +#define PLCP_SIGNAL_11M 0x6e + +struct adm8211_tx_hdr { + u8 da[6]; + u8 signal; /* PLCP signal / TX rate in 100 Kbps */ + u8 service; + __le16 frame_body_size; + __le16 frame_control; + __le16 plcp_frag_tail_len; + __le16 plcp_frag_head_len; + __le16 dur_frag_tail; + __le16 dur_frag_head; + u8 addr4[6]; + +#define ADM8211_TXHDRCTL_SHORT_PREAMBLE (1 << 0) +#define ADM8211_TXHDRCTL_MORE_FRAG (1 << 1) +#define ADM8211_TXHDRCTL_MORE_DATA (1 << 2) +#define ADM8211_TXHDRCTL_FRAG_NO (1 << 3) /* ? */ +#define ADM8211_TXHDRCTL_ENABLE_RTS (1 << 4) +#define ADM8211_TXHDRCTL_ENABLE_WEP_ENGINE (1 << 5) +#define ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER (1 << 15) /* ? */ + __le16 header_control; + __le16 frag; + u8 reserved_0; + u8 retry_limit; + + u32 wep2key0; + u32 wep2key1; + u32 wep2key2; + u32 wep2key3; + + u8 keyid; + u8 entry_control; // huh?? + u16 reserved_1; + u32 reserved_2; +} __attribute__ ((packed)); + + +#define RX_COPY_BREAK 128 +#define RX_PKT_SIZE 2500 + +struct adm8211_eeprom { + __le16 signature; /* 0x00 */ + u8 major_version; /* 0x02 */ + u8 minor_version; /* 0x03 */ + u8 reserved_1[4]; /* 0x04 */ + u8 hwaddr[6]; /* 0x08 */ + u8 reserved_2[8]; /* 0x1E */ + __le16 cr49; /* 0x16 */ + u8 cr03; /* 0x18 */ + u8 cr28; /* 0x19 */ + u8 cr29; /* 0x1A */ + u8 country_code; /* 0x1B */ + +/* specific bbp types */ +#define ADM8211_BBP_RFMD3000 0x00 +#define ADM8211_BBP_RFMD3002 0x01 +#define ADM8211_BBP_ADM8011 0x04 + u8 specific_bbptype; /* 0x1C */ + u8 specific_rftype; /* 0x1D */ + u8 reserved_3[2]; /* 0x1E */ + __le16 device_id; /* 0x20 */ + __le16 vendor_id; /* 0x22 */ + __le16 subsystem_id; /* 0x24 */ + __le16 subsystem_vendor_id; /* 0x26 */ + u8 maxlat; /* 0x28 */ + u8 mingnt; /* 0x29 */ + __le16 cis_pointer_low; /* 0x2A */ + __le16 cis_pointer_high; /* 0x2C */ + __le16 csr18; /* 0x2E */ + u8 reserved_4[16]; /* 0x30 */ + u8 d1_pwrdara; /* 0x40 */ + u8 d0_pwrdara; /* 0x41 */ + u8 d3_pwrdara; /* 0x42 */ + u8 d2_pwrdara; /* 0x43 */ + u8 antenna_power[14]; /* 0x44 */ + __le16 cis_wordcnt; /* 0x52 */ + u8 tx_power[14]; /* 0x54 */ + u8 lpf_cutoff[14]; /* 0x62 */ + u8 lnags_threshold[14]; /* 0x70 */ + __le16 checksum; /* 0x7E */ + u8 cis_data[0]; /* 0x80, 384 bytes */ +} __attribute__ ((packed)); + +static const struct ieee80211_rate adm8211_rates[] = { + { .rate = 10, + .val = 10, + .val2 = -10, + .flags = IEEE80211_RATE_CCK_2 }, + { .rate = 20, + .val = 20, + .val2 = -20, + .flags = IEEE80211_RATE_CCK_2 }, + { .rate = 55, + .val = 55, + .val2 = -55, + .flags = IEEE80211_RATE_CCK_2 }, + { .rate = 110, + .val = 110, + .val2 = -110, + .flags = IEEE80211_RATE_CCK_2 } +}; + +struct ieee80211_chan_range { + u8 min; + u8 max; +}; + +static const struct ieee80211_channel adm8211_channels[] = { + { .chan = 1, + .freq = 2412}, + { .chan = 2, + .freq = 2417}, + { .chan = 3, + .freq = 2422}, + { .chan = 4, + .freq = 2427}, + { .chan = 5, + .freq = 2432}, + { .chan = 6, + .freq = 2437}, + { .chan = 7, + .freq = 2442}, + { .chan = 8, + .freq = 2447}, + { .chan = 9, + .freq = 2452}, + { .chan = 10, + .freq = 2457}, + { .chan = 11, + .freq = 2462}, + { .chan = 12, + .freq = 2467}, + { .chan = 13, + .freq = 2472}, + { .chan = 14, + .freq = 2484}, +}; + +struct adm8211_priv { + struct pci_dev *pdev; + spinlock_t lock; + struct adm8211_csr __iomem *map; + struct adm8211_desc *rx_ring; + struct adm8211_desc *tx_ring; + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; + struct adm8211_rx_ring_info *rx_buffers; + struct adm8211_tx_ring_info *tx_buffers; + unsigned int rx_ring_size, tx_ring_size; + unsigned int cur_tx, dirty_tx, cur_rx; + + struct ieee80211_low_level_stats stats; + struct ieee80211_hw_mode modes[1]; + struct ieee80211_channel channels[ARRAY_SIZE(adm8211_channels)]; + struct ieee80211_rate rates[ARRAY_SIZE(adm8211_rates)]; + int mode; + + int channel; + u8 bssid[ETH_ALEN]; + u8 ssid[32]; + size_t ssid_len; + u8 *mac_addr; + + u8 soft_rx_crc; + u8 retry_limit; + + u8 ant_power; + u8 tx_power; + u8 lpf_cutoff; + u8 lnags_threshold; + struct adm8211_eeprom *eeprom; + size_t eeprom_len; + + u8 revid; + + u32 nar; + +#define ADM8211_TYPE_INTERSIL 0x00 +#define ADM8211_TYPE_RFMD 0x01 +#define ADM8211_TYPE_MARVEL 0x02 +#define ADM8211_TYPE_AIROHA 0x03 +#define ADM8211_TYPE_ADMTEK 0x05 + unsigned int rf_type:3; + unsigned int bbp_type:3; + + u8 specific_bbptype; + enum { + ADM8211_RFMD2948 = 0x0, + ADM8211_RFMD2958 = 0x1, + ADM8211_RFMD2958_RF3000_CONTROL_POWER = 0x2, + ADM8211_MAX2820 = 0x8, + ADM8211_AL2210L = 0xC, /* Airoha */ + } transceiver_type; +}; + +static const struct ieee80211_chan_range cranges[] = { + {1, 11}, /* FCC */ + {1, 11}, /* IC */ + {1, 13}, /* ETSI */ + {10, 11}, /* SPAIN */ + {10, 13}, /* FRANCE */ + {14, 14}, /* MMK */ + {1, 14}, /* MMK2 */ +}; + +#endif /* ADM8211_H */ -- 2.39.5