From cacfd56756c087873f22dc9e2ace5f634775836a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 Feb 2007 01:03:48 -0800 Subject: [PATCH] [SPARC]: Remove the broken SUN_AURORA driver. The SUN_AURORA driver: - has been marked as BROKEN for more than two years and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller --- Documentation/magic-number.txt | 1 - drivers/sbus/char/Kconfig | 7 - drivers/sbus/char/Makefile | 1 - drivers/sbus/char/aurora.c | 2364 -------------------------------- drivers/sbus/char/aurora.h | 276 ---- drivers/sbus/char/cd180.h | 240 ---- 6 files changed, 2889 deletions(-) delete mode 100644 drivers/sbus/char/aurora.c delete mode 100644 drivers/sbus/char/aurora.h delete mode 100644 drivers/sbus/char/cd180.h diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt index af67faccf4..0e740c812d 100644 --- a/Documentation/magic-number.txt +++ b/Documentation/magic-number.txt @@ -65,7 +65,6 @@ CMAGIC 0x0111 user include/linux/a.out.h MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h -AURORA_MAGIC 0x0A18 Aurora_port drivers/sbus/char/aurora.h HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c APM_BIOS_MAGIC 0x4101 apm_user arch/i386/kernel/apm.c CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h diff --git a/drivers/sbus/char/Kconfig b/drivers/sbus/char/Kconfig index 3a8152906b..35a7316833 100644 --- a/drivers/sbus/char/Kconfig +++ b/drivers/sbus/char/Kconfig @@ -46,13 +46,6 @@ config SUN_VIDEOPIX based on the Phillips SAA9051, can handle NTSC and PAL/SECAM and SVIDEO signals. -config SUN_AURORA - tristate "Aurora Multiboard 1600se (EXPERIMENTAL)" - depends on EXPERIMENTAL && BROKEN - help - The Aurora Multiboard is a multi-port high-speed serial controller. - If you have one of these, say Y. - config TADPOLE_TS102_UCTRL tristate "Tadpole TS102 Microcontroller support (EXPERIMENTAL)" depends on EXPERIMENTAL && SPARC32 diff --git a/drivers/sbus/char/Makefile b/drivers/sbus/char/Makefile index 3a5ea1dc78..7ab060e9a5 100644 --- a/drivers/sbus/char/Makefile +++ b/drivers/sbus/char/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_SUN_OPENPROMIO) += openprom.o obj-$(CONFIG_SUN_MOSTEK_RTC) += rtc.o obj-$(CONFIG_SUN_BPP) += bpp.o obj-$(CONFIG_SUN_VIDEOPIX) += vfc.o -obj-$(CONFIG_SUN_AURORA) += aurora.o obj-$(CONFIG_TADPOLE_TS102_UCTRL) += uctrl.o obj-$(CONFIG_SUN_JSFLASH) += jsflash.o obj-$(CONFIG_BBC_I2C) += bbc.o diff --git a/drivers/sbus/char/aurora.c b/drivers/sbus/char/aurora.c deleted file mode 100644 index a54b4ac675..0000000000 --- a/drivers/sbus/char/aurora.c +++ /dev/null @@ -1,2364 +0,0 @@ -/* $Id: aurora.c,v 1.19 2002/01/08 16:00:16 davem Exp $ - * linux/drivers/sbus/char/aurora.c -- Aurora multiport driver - * - * Copyright (c) 1999 by Oliver Aldulea (oli at bv dot ro) - * - * This code is based on the RISCom/8 multiport serial driver written - * by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial - * driver, written by Linus Torvalds, Theodore T'so and others. - * The Aurora multiport programming info was obtained mainly from the - * Cirrus Logic CD180 documentation (available on the web), and by - * doing heavy tests on the board. Many thanks to Eddie C. Dost for the - * help on the sbus interface. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Revision 1.0 - * - * This is the first public release. - * - * Most of the information you need is in the aurora.h file. Please - * read that file before reading this one. - * - * Several parts of the code do not have comments yet. - * - * n.b. The board can support 115.2 bit rates, but only on a few - * ports. The total badwidth of one chip (ports 0-7 or 8-15) is equal - * to OSC_FREQ div 16. In case of my board, each chip can take 6 - * channels of 115.2 kbaud. This information is not well-tested. - * - * Fixed to use tty_get_baud_rate(). - * Theodore Ts'o , 2001-Oct-12 - */ - -#include - -#include -#include -#ifdef AURORA_INT_DEBUG -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "aurora.h" -#include "cd180.h" - -unsigned char irqs[4] = { - 0, 0, 0, 0 -}; - -#ifdef AURORA_INT_DEBUG -int irqhit=0; -#endif - -static struct tty_driver *aurora_driver; -static struct Aurora_board aurora_board[AURORA_NBOARD] = { - {0,}, -}; - -static struct Aurora_port aurora_port[AURORA_TNPORTS] = { - { 0, }, -}; - -/* no longer used. static struct Aurora_board * IRQ_to_board[16] = { NULL, } ;*/ -static unsigned char * tmp_buf = NULL; - -DECLARE_TASK_QUEUE(tq_aurora); - -static inline int aurora_paranoia_check(struct Aurora_port const * port, - char *name, const char *routine) -{ -#ifdef AURORA_PARANOIA_CHECK - static const char *badmagic = - KERN_DEBUG "aurora: Warning: bad aurora port magic number for device %s in %s\n"; - static const char *badinfo = - KERN_DEBUG "aurora: Warning: null aurora port for device %s in %s\n"; - - if (!port) { - printk(badinfo, name, routine); - return 1; - } - if (port->magic != AURORA_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * - * Service functions for aurora driver. - * - */ - -/* Get board number from pointer */ -static inline int board_No (struct Aurora_board const * bp) -{ - return bp - aurora_board; -} - -/* Get port number from pointer */ -static inline int port_No (struct Aurora_port const * port) -{ - return AURORA_PORT(port - aurora_port); -} - -/* Get pointer to board from pointer to port */ -static inline struct Aurora_board * port_Board(struct Aurora_port const * port) -{ - return &aurora_board[AURORA_BOARD(port - aurora_port)]; -} - -/* Wait for Channel Command Register ready */ -static inline void aurora_wait_CCR(struct aurora_reg128 * r) -{ - unsigned long delay; - -#ifdef AURORA_DEBUG -printk("aurora_wait_CCR\n"); -#endif - /* FIXME: need something more descriptive than 100000 :) */ - for (delay = 100000; delay; delay--) - if (!sbus_readb(&r->r[CD180_CCR])) - return; - printk(KERN_DEBUG "aurora: Timeout waiting for CCR.\n"); -} - -/* - * aurora probe functions. - */ - -/* Must be called with enabled interrupts */ -static inline void aurora_long_delay(unsigned long delay) -{ - unsigned long i; - -#ifdef AURORA_DEBUG - printk("aurora_long_delay: start\n"); -#endif - for (i = jiffies + delay; time_before(jiffies, i); ) ; -#ifdef AURORA_DEBUG - printk("aurora_long_delay: end\n"); -#endif -} - -/* Reset and setup CD180 chip */ -static int aurora_init_CD180(struct Aurora_board * bp, int chip) -{ - unsigned long flags; - int id; - -#ifdef AURORA_DEBUG - printk("aurora_init_CD180: start %d:%d\n", - board_No(bp), chip); -#endif - save_flags(flags); cli(); - sbus_writeb(0, &bp->r[chip]->r[CD180_CAR]); - sbus_writeb(0, &bp->r[chip]->r[CD180_GSVR]); - - /* Wait for CCR ready */ - aurora_wait_CCR(bp->r[chip]); - - /* Reset CD180 chip */ - sbus_writeb(CCR_HARDRESET, &bp->r[chip]->r[CD180_CCR]); - udelay(1); - sti(); - id=1000; - while((--id) && - (sbus_readb(&bp->r[chip]->r[CD180_GSVR])!=0xff))udelay(100); - if(!id) { - printk(KERN_ERR "aurora%d: Chip %d failed init.\n", - board_No(bp), chip); - restore_flags(flags); - return(-1); - } - cli(); - sbus_writeb((board_No(bp)<<5)|((chip+1)<<3), - &bp->r[chip]->r[CD180_GSVR]); /* Set ID for this chip */ - sbus_writeb(0x80|bp->ACK_MINT, - &bp->r[chip]->r[CD180_MSMR]); /* Prio for modem intr */ - sbus_writeb(0x80|bp->ACK_TINT, - &bp->r[chip]->r[CD180_TSMR]); /* Prio for transmitter intr */ - sbus_writeb(0x80|bp->ACK_RINT, - &bp->r[chip]->r[CD180_RSMR]); /* Prio for receiver intr */ - /* Setting up prescaler. We need 4 tick per 1 ms */ - sbus_writeb((bp->oscfreq/(1000000/AURORA_TPS)) >> 8, - &bp->r[chip]->r[CD180_PPRH]); - sbus_writeb((bp->oscfreq/(1000000/AURORA_TPS)) & 0xff, - &bp->r[chip]->r[CD180_PPRL]); - - sbus_writeb(SRCR_AUTOPRI|SRCR_GLOBPRI, - &bp->r[chip]->r[CD180_SRCR]); - - id = sbus_readb(&bp->r[chip]->r[CD180_GFRCR]); - printk(KERN_INFO "aurora%d: Chip %d id %02x: ", - board_No(bp), chip,id); - if(sbus_readb(&bp->r[chip]->r[CD180_SRCR]) & 128) { - switch (id) { - case 0x82:printk("CL-CD1864 rev A\n");break; - case 0x83:printk("CL-CD1865 rev A\n");break; - case 0x84:printk("CL-CD1865 rev B\n");break; - case 0x85:printk("CL-CD1865 rev C\n");break; - default:printk("Unknown.\n"); - }; - } else { - switch (id) { - case 0x81:printk("CL-CD180 rev B\n");break; - case 0x82:printk("CL-CD180 rev C\n");break; - default:printk("Unknown.\n"); - }; - } - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_init_CD180: end\n"); -#endif - return 0; -} - -static int valid_irq(unsigned char irq) -{ -int i; -for(i=0;iprom_name);*/ - if (!strcmp(sdev->prom_name, "sio16")) { -#ifdef AURORA_DEBUG - printk(KERN_INFO "aurora: sio16 at %p\n",sdev); -#endif - if((sdev->reg_addrs[0].reg_size!=1) && - (sdev->reg_addrs[1].reg_size!=128) && - (sdev->reg_addrs[2].reg_size!=128) && - (sdev->reg_addrs[3].reg_size!=4)) { - printk(KERN_ERR "aurora%d: registers' sizes " - "do not match.\n", bn); - break; - } - bp = &aurora_board[bn]; - bp->r0 = (struct aurora_reg1 *) - sbus_ioremap(&sdev->resource[0], 0, - sdev->reg_addrs[0].reg_size, - "sio16"); - if (bp->r0 == NULL) { - printk(KERN_ERR "aurora%d: can't map " - "reg_addrs[0]\n", bn); - break; - } -#ifdef AURORA_DEBUG - printk("Map reg 0: %p\n", bp->r0); -#endif - bp->r[0] = (struct aurora_reg128 *) - sbus_ioremap(&sdev->resource[1], 0, - sdev->reg_addrs[1].reg_size, - "sio16"); - if (bp->r[0] == NULL) { - printk(KERN_ERR "aurora%d: can't map " - "reg_addrs[1]\n", bn); - break; - } -#ifdef AURORA_DEBUG - printk("Map reg 1: %p\n", bp->r[0]); -#endif - bp->r[1] = (struct aurora_reg128 *) - sbus_ioremap(&sdev->resource[2], 0, - sdev->reg_addrs[2].reg_size, - "sio16"); - if (bp->r[1] == NULL) { - printk(KERN_ERR "aurora%d: can't map " - "reg_addrs[2]\n", bn); - break; - } -#ifdef AURORA_DEBUG - printk("Map reg 2: %p\n", bp->r[1]); -#endif - bp->r3 = (struct aurora_reg4 *) - sbus_ioremap(&sdev->resource[3], 0, - sdev->reg_addrs[3].reg_size, - "sio16"); - if (bp->r3 == NULL) { - printk(KERN_ERR "aurora%d: can't map " - "reg_addrs[3]\n", bn); - break; - } -#ifdef AURORA_DEBUG - printk("Map reg 3: %p\n", bp->r3); -#endif - /* Variables setup */ - bp->flags = 0; -#ifdef AURORA_DEBUG - grrr=prom_getint(sdev->prom_node,"intr"); - printk("intr pri %d\n", grrr); -#endif - if ((bp->irq=irqs[bn]) && valid_irq(bp->irq) && - !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { - free_irq(bp->irq|0x30, bp); - } else - if ((bp->irq=prom_getint(sdev->prom_node, "bintr")) && valid_irq(bp->irq) && - !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { - free_irq(bp->irq|0x30, bp); - } else - if ((bp->irq=prom_getint(sdev->prom_node, "intr")) && valid_irq(bp->irq) && - !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { - free_irq(bp->irq|0x30, bp); - } else - for(grrr=0;grrrirq=type_1_irq[grrr])&&!request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { - free_irq(bp->irq|0x30, bp); - break; - } else { - printk(KERN_ERR "aurora%d: Could not get an irq for this board !!!\n",bn); - bp->flags=0xff; - } - } - if(bp->flags==0xff)break; - printk(KERN_INFO "aurora%d: irq %d\n",bn,bp->irq&0x0f); - buf[0]=0; - grrr=prom_getproperty(sdev->prom_node,"dtr_rts",buf,sizeof(buf)); - if(!strcmp(buf,"swapped")){ - printk(KERN_INFO "aurora%d: Swapped DTR and RTS\n",bn); - bp->DTR=MSVR_RTS; - bp->RTS=MSVR_DTR; - bp->MSVDTR=CD180_MSVRTS; - bp->MSVRTS=CD180_MSVDTR; - bp->flags|=AURORA_BOARD_DTR_FLOW_OK; - }else{ - #ifdef AURORA_FORCE_DTR_FLOW - printk(KERN_INFO "aurora%d: Forcing swapped DTR-RTS\n",bn); - bp->DTR=MSVR_RTS; - bp->RTS=MSVR_DTR; - bp->MSVDTR=CD180_MSVRTS; - bp->MSVRTS=CD180_MSVDTR; - bp->flags|=AURORA_BOARD_DTR_FLOW_OK; - #else - printk(KERN_INFO "aurora%d: Normal DTR and RTS\n",bn); - bp->DTR=MSVR_DTR; - bp->RTS=MSVR_RTS; - bp->MSVDTR=CD180_MSVDTR; - bp->MSVRTS=CD180_MSVRTS; - #endif - } - bp->oscfreq=prom_getint(sdev->prom_node,"clk")*100; - printk(KERN_INFO "aurora%d: Oscillator: %d Hz\n",bn,bp->oscfreq); - grrr=prom_getproperty(sdev->prom_node,"chip",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Chips: %s\n",bn,buf); - grrr=prom_getproperty(sdev->prom_node,"manu",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Manufacturer: %s\n",bn,buf); - grrr=prom_getproperty(sdev->prom_node,"model",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Model: %s\n",bn,buf); - grrr=prom_getproperty(sdev->prom_node,"rev",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Revision: %s\n",bn,buf); - grrr=prom_getproperty(sdev->prom_node,"mode",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Mode: %s\n",bn,buf); - #ifdef MODULE - bp->count=0; - #endif - bp->flags = AURORA_BOARD_PRESENT; - /* hardware ack */ - bp->ACK_MINT=1; - bp->ACK_TINT=2; - bp->ACK_RINT=3; - bn++; - } - } - } - return bn; -} - -static void aurora_release_io_range(struct Aurora_board *bp) -{ - sbus_iounmap((unsigned long)bp->r0, 1); - sbus_iounmap((unsigned long)bp->r[0], 128); - sbus_iounmap((unsigned long)bp->r[1], 128); - sbus_iounmap((unsigned long)bp->r3, 4); -} - -static inline void aurora_mark_event(struct Aurora_port * port, int event) -{ -#ifdef AURORA_DEBUG - printk("aurora_mark_event: start\n"); -#endif - set_bit(event, &port->event); - queue_task(&port->tqueue, &tq_aurora); - mark_bh(AURORA_BH); -#ifdef AURORA_DEBUG - printk("aurora_mark_event: end\n"); -#endif -} - -static __inline__ struct Aurora_port * aurora_get_port(struct Aurora_board const * bp, - int chip, - unsigned char const *what) -{ - unsigned char channel; - struct Aurora_port * port; - - channel = ((chip << 3) | - ((sbus_readb(&bp->r[chip]->r[CD180_GSCR]) & GSCR_CHAN) >> GSCR_CHAN_OFF)); - port = &aurora_port[board_No(bp) * AURORA_NPORT * AURORA_NCD180 + channel]; - if (port->flags & ASYNC_INITIALIZED) - return port; - - printk(KERN_DEBUG "aurora%d: %s interrupt from invalid port %d\n", - board_No(bp), what, channel); - return NULL; -} - -static void aurora_receive_exc(struct Aurora_board const * bp, int chip) -{ - struct Aurora_port *port; - struct tty_struct *tty; - unsigned char status; - unsigned char ch; - - if (!(port = aurora_get_port(bp, chip, "Receive_x"))) - return; - - tty = port->tty; - if (tty->flip.count >= TTY_FLIPBUF_SIZE) { -#ifdef AURORA_INTNORM - printk("aurora%d: port %d: Working around flip buffer overflow.\n", - board_No(bp), port_No(port)); -#endif - return; - } - -#ifdef AURORA_REPORT_OVERRUN - status = sbus_readb(&bp->r[chip]->r[CD180_RCSR]); - if (status & RCSR_OE) { - port->overrun++; -#if 1 - printk("aurora%d: port %d: Overrun. Total %ld overruns.\n", - board_No(bp), port_No(port), port->overrun); -#endif - } - status &= port->mark_mask; -#else - status = sbus_readb(&bp->r[chip]->r[CD180_RCSR]) & port->mark_mask; -#endif - ch = sbus_readb(&bp->r[chip]->r[CD180_RDR]); - if (!status) - return; - - if (status & RCSR_TOUT) { -/* printk("aurora%d: port %d: Receiver timeout. Hardware problems ?\n", - board_No(bp), port_No(port));*/ - return; - - } else if (status & RCSR_BREAK) { - printk(KERN_DEBUG "aurora%d: port %d: Handling break...\n", - board_No(bp), port_No(port)); - *tty->flip.flag_buf_ptr++ = TTY_BREAK; - if (port->flags & ASYNC_SAK) - do_SAK(tty); - - } else if (status & RCSR_PE) - *tty->flip.flag_buf_ptr++ = TTY_PARITY; - - else if (status & RCSR_FE) - *tty->flip.flag_buf_ptr++ = TTY_FRAME; - - else if (status & RCSR_OE) - *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; - - else - *tty->flip.flag_buf_ptr++ = 0; - - *tty->flip.char_buf_ptr++ = ch; - tty->flip.count++; - queue_task(&tty->flip.tqueue, &tq_timer); -} - -static void aurora_receive(struct Aurora_board const * bp, int chip) -{ - struct Aurora_port *port; - struct tty_struct *tty; - unsigned char count,cnt; - - if (!(port = aurora_get_port(bp, chip, "Receive"))) - return; - - tty = port->tty; - - count = sbus_readb(&bp->r[chip]->r[CD180_RDCR]); - -#ifdef AURORA_REPORT_FIFO - port->hits[count > 8 ? 9 : count]++; -#endif - - while (count--) { - if (tty->flip.count >= TTY_FLIPBUF_SIZE) { -#ifdef AURORA_INTNORM - printk("aurora%d: port %d: Working around flip buffer overflow.\n", - board_No(bp), port_No(port)); -#endif - break; - } - cnt = sbus_readb(&bp->r[chip]->r[CD180_RDR]); - *tty->flip.char_buf_ptr++ = cnt; - *tty->flip.flag_buf_ptr++ = 0; - tty->flip.count++; - } - queue_task(&tty->flip.tqueue, &tq_timer); -} - -static void aurora_transmit(struct Aurora_board const * bp, int chip) -{ - struct Aurora_port *port; - struct tty_struct *tty; - unsigned char count; - - if (!(port = aurora_get_port(bp, chip, "Transmit"))) - return; - - tty = port->tty; - - if (port->SRER & SRER_TXEMPTY) { - /* FIFO drained */ - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - port->SRER &= ~SRER_TXEMPTY; - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - return; - } - - if ((port->xmit_cnt <= 0 && !port->break_length) - || tty->stopped || tty->hw_stopped) { - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - port->SRER &= ~SRER_TXRDY; - sbus_writeb(port->SRER, - &bp->r[chip]->r[CD180_SRER]); - return; - } - - if (port->break_length) { - if (port->break_length > 0) { - if (port->COR2 & COR2_ETC) { - sbus_writeb(CD180_C_ESC, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(CD180_C_SBRK, - &bp->r[chip]->r[CD180_TDR]); - port->COR2 &= ~COR2_ETC; - } - count = min(port->break_length, 0xff); - sbus_writeb(CD180_C_ESC, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(CD180_C_DELAY, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(count, - &bp->r[chip]->r[CD180_TDR]); - if (!(port->break_length -= count)) - port->break_length--; - } else { - sbus_writeb(CD180_C_ESC, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(CD180_C_EBRK, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(port->COR2, - &bp->r[chip]->r[CD180_COR2]); - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_CORCHG2, - &bp->r[chip]->r[CD180_CCR]); - port->break_length = 0; - } - return; - } - - count = CD180_NFIFO; - do { - u8 byte = port->xmit_buf[port->xmit_tail++]; - - sbus_writeb(byte, &bp->r[chip]->r[CD180_TDR]); - port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); - if (--port->xmit_cnt <= 0) - break; - } while (--count > 0); - - if (port->xmit_cnt <= 0) { - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - port->SRER &= ~SRER_TXRDY; - sbus_writeb(port->SRER, - &bp->r[chip]->r[CD180_SRER]); - } - if (port->xmit_cnt <= port->wakeup_chars) - aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); -} - -static void aurora_check_modem(struct Aurora_board const * bp, int chip) -{ - struct Aurora_port *port; - struct tty_struct *tty; - unsigned char mcr; - - if (!(port = aurora_get_port(bp, chip, "Modem"))) - return; - - tty = port->tty; - - mcr = sbus_readb(&bp->r[chip]->r[CD180_MCR]); - if (mcr & MCR_CDCHG) { - if (sbus_readb(&bp->r[chip]->r[CD180_MSVR]) & MSVR_CD) - wake_up_interruptible(&port->open_wait); - else - schedule_task(&port->tqueue_hangup); - } - -/* We don't have such things yet. My aurora board has DTR and RTS swapped, but that doesn't count in this driver. Let's hope - * Aurora didn't made any boards with CTS or DSR broken... - */ -/* #ifdef AURORA_BRAIN_DAMAGED_CTS - if (mcr & MCR_CTSCHG) { - if (aurora_in(bp, CD180_MSVR) & MSVR_CTS) { - tty->hw_stopped = 0; - port->SRER |= SRER_TXRDY; - if (port->xmit_cnt <= port->wakeup_chars) - aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); - } else { - tty->hw_stopped = 1; - port->SRER &= ~SRER_TXRDY; - } - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - } - if (mcr & MCR_DSRCHG) { - if (aurora_in(bp, CD180_MSVR) & MSVR_DSR) { - tty->hw_stopped = 0; - port->SRER |= SRER_TXRDY; - if (port->xmit_cnt <= port->wakeup_chars) - aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); - } else { - tty->hw_stopped = 1; - port->SRER &= ~SRER_TXRDY; - } - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - } -#endif AURORA_BRAIN_DAMAGED_CTS */ - - /* Clear change bits */ - sbus_writeb(0, &bp->r[chip]->r[CD180_MCR]); -} - -/* The main interrupt processing routine */ -static irqreturn_t aurora_interrupt(int irq, void * dev_id) -{ - unsigned char status; - unsigned char ack,chip/*,chip_id*/; - struct Aurora_board * bp = (struct Aurora_board *) dev_id; - unsigned long loop = 0; - -#ifdef AURORA_INT_DEBUG - printk("IRQ%d %d\n",irq,++irqhit); -#ifdef AURORA_FLOODPRO - if (irqhit>=AURORA_FLOODPRO) - sbus_writeb(8, &bp->r0->r); -#endif -#endif - -/* old bp = IRQ_to_board[irq&0x0f];*/ - - if (!bp || !(bp->flags & AURORA_BOARD_ACTIVE)) - return IRQ_NONE; - -/* The while() below takes care of this. - status = sbus_readb(&bp->r[0]->r[CD180_SRSR]); -#ifdef AURORA_INT_DEBUG - printk("mumu: %02x\n", status); -#endif - if (!(status&SRSR_ANYINT)) - return IRQ_NONE; * Nobody has anything to say, so exit * -*/ - while ((loop++ < 48) && - (status = sbus_readb(&bp->r[0]->r[CD180_SRSR]) & SRSR_ANYINT)){ -#ifdef AURORA_INT_DEBUG - printk("SRSR: %02x\n", status); -#endif - if (status & SRSR_REXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_RINT]); -#ifdef AURORA_INT_DEBUG - printk("R-ACK %02x\n", ack); -#endif - if ((ack >> 5) == board_No(bp)) { - if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { - if ((ack&GSVR_ITMASK)==GSVR_IT_RGD) { - aurora_receive(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } else if ((ack & GSVR_ITMASK) == GSVR_IT_REXC) { - aurora_receive_exc(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } - } - } - } else if (status & SRSR_TEXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_TINT]); -#ifdef AURORA_INT_DEBUG - printk("T-ACK %02x\n", ack); -#endif - if ((ack >> 5) == board_No(bp)) { - if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { - if ((ack&GSVR_ITMASK)==GSVR_IT_TX) { - aurora_transmit(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } - } - } - } else if (status & SRSR_MEXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_MINT]); -#ifdef AURORA_INT_DEBUG - printk("M-ACK %02x\n", ack); -#endif - if ((ack >> 5) == board_No(bp)) { - if ((chip = ((ack>>3)&3)-1) < AURORA_NCD180) { - if ((ack&GSVR_ITMASK)==GSVR_IT_MDM) { - aurora_check_modem(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } - } - } - } - } -/* I guess this faster code can be used with CD1865, using AUROPRI and GLOBPRI. */ -#if 0 - while ((loop++ < 48)&&(status=bp->r[0]->r[CD180_SRSR]&SRSR_ANYINT)){ -#ifdef AURORA_INT_DEBUG - printk("SRSR: %02x\n",status); -#endif - ack = sbus_readb(&bp->r3->r[0]); -#ifdef AURORA_INT_DEBUG - printk("ACK: %02x\n",ack); -#endif - if ((ack>>5)==board_No(bp)) { - if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { - ack&=GSVR_ITMASK; - if (ack==GSVR_IT_RGD) { - aurora_receive(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } else if (ack==GSVR_IT_REXC) { - aurora_receive_exc(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } else if (ack==GSVR_IT_TX) { - aurora_transmit(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } else if (ack==GSVR_IT_MDM) { - aurora_check_modem(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } - } - } - } -#endif - -/* This is the old handling routine, used in riscom8 for only one CD180. I keep it here for reference. */ -#if 0 - for(chip=0;chipr[chip]->r[CD180_SRSR])) & - (SRSR_TEXT | SRSR_MEXT | SRSR_REXT))) { - - if (status & SRSR_REXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_RINT]); - if (ack == (chip_id | GSVR_IT_RGD)) { -#ifdef AURORA_INTMSG - printk("RX ACK\n"); -#endif - aurora_receive(bp,chip); - } else if (ack == (chip_id | GSVR_IT_REXC)) { -#ifdef AURORA_INTMSG - printk("RXC ACK\n"); -#endif - aurora_receive_exc(bp,chip); - } else { -#ifdef AURORA_INTNORM - printk("aurora%d-%d: Bad receive ack 0x%02x.\n", - board_No(bp), chip, ack); -#endif - } - } else if (status & SRSR_TEXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_TINT]); - if (ack == (chip_id | GSVR_IT_TX)){ -#ifdef AURORA_INTMSG - printk("TX ACK\n"); -#endif - aurora_transmit(bp,chip); - } else { -#ifdef AURORA_INTNORM - printk("aurora%d-%d: Bad transmit ack 0x%02x.\n", - board_No(bp), chip, ack); -#endif - } - } else if (status & SRSR_MEXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_MINT]); - if (ack == (chip_id | GSVR_IT_MDM)){ -#ifdef AURORA_INTMSG - printk("MDM ACK\n"); -#endif - aurora_check_modem(bp,chip); - } else { -#ifdef AURORA_INTNORM - printk("aurora%d-%d: Bad modem ack 0x%02x.\n", - board_No(bp), chip, ack); -#endif - } - } - sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); - } - } -#endif - - return IRQ_HANDLED; -} - -#ifdef AURORA_INT_DEBUG -static void aurora_timer (unsigned long ignored); - -static DEFINE_TIMER(aurora_poll_timer, aurora_timer, 0, 0); - -static void -aurora_timer (unsigned long ignored) -{ - unsigned long flags; - int i; - - save_flags(flags); cli(); - - printk("SRSR: %02x,%02x - ", - sbus_readb(&aurora_board[0].r[0]->r[CD180_SRSR]), - sbus_readb(&aurora_board[0].r[1]->r[CD180_SRSR])); - for (i = 0; i < 4; i++) { - udelay(1); - printk("%02x ", - sbus_readb(&aurora_board[0].r3->r[i])); - } - printk("\n"); - - aurora_poll_timer.expires = jiffies + 300; - add_timer (&aurora_poll_timer); - - restore_flags(flags); -} -#endif - -/* - * Routines for open & close processing. - */ - -/* Called with disabled interrupts */ -static int aurora_setup_board(struct Aurora_board * bp) -{ - int error; - -#ifdef AURORA_ALLIRQ - int i; - for (i = 0; i < AURORA_ALLIRQ; i++) { - error = request_irq(allirq[i]|0x30, aurora_interrupt, IRQF_SHARED, - "sio16", bp); - if (error) - printk(KERN_ERR "IRQ%d request error %d\n", - allirq[i], error); - } -#else - error = request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, - "sio16", bp); - if (error) { - printk(KERN_ERR "IRQ request error %d\n", error); - return error; - } -#endif - /* Board reset */ - sbus_writeb(0, &bp->r0->r); - udelay(1); - if (bp->flags & AURORA_BOARD_TYPE_2) { - /* unknown yet */ - } else { - sbus_writeb((AURORA_CFG_ENABLE_IO | AURORA_CFG_ENABLE_IRQ | - (((bp->irq)&0x0f)>>2)), - &bp->r0->r); - } - udelay(10000); - - if (aurora_init_CD180(bp,0))error=1;error=0; - if (aurora_init_CD180(bp,1))error++; - if (error == AURORA_NCD180) { - printk(KERN_ERR "Both chips failed initialisation.\n"); - return -EIO; - } - -#ifdef AURORA_INT_DEBUG - aurora_poll_timer.expires= jiffies + 1; - add_timer(&aurora_poll_timer); -#endif -#ifdef AURORA_DEBUG - printk("aurora_setup_board: end\n"); -#endif - return 0; -} - -/* Called with disabled interrupts */ -static void aurora_shutdown_board(struct Aurora_board *bp) -{ - int i; - -#ifdef AURORA_DEBUG - printk("aurora_shutdown_board: start\n"); -#endif - -#ifdef AURORA_INT_DEBUG - del_timer(&aurora_poll_timer); -#endif - -#ifdef AURORA_ALLIRQ - for(i=0;iirq|0x30, bp); -/* IRQ_to_board[bp->irq&0xf] = NULL;*/ -#endif - /* Drop all DTR's */ - for(i=0;i<16;i++){ - sbus_writeb(i & 7, &bp->r[i>>3]->r[CD180_CAR]); - udelay(1); - sbus_writeb(0, &bp->r[i>>3]->r[CD180_MSVR]); - udelay(1); - } - /* Board shutdown */ - sbus_writeb(0, &bp->r0->r); - -#ifdef AURORA_DEBUG - printk("aurora_shutdown_board: end\n"); -#endif -} - -/* Setting up port characteristics. - * Must be called with disabled interrupts - */ -static void aurora_change_speed(struct Aurora_board *bp, struct Aurora_port *port) -{ - struct tty_struct *tty; - unsigned long baud; - long tmp; - unsigned char cor1 = 0, cor3 = 0; - unsigned char mcor1 = 0, mcor2 = 0,chip; - -#ifdef AURORA_DEBUG - printk("aurora_change_speed: start\n"); -#endif - if (!(tty = port->tty) || !tty->termios) - return; - - chip = AURORA_CD180(port_No(port)); - - port->SRER = 0; - port->COR2 = 0; - port->MSVR = MSVR_RTS|MSVR_DTR; - - baud = tty_get_baud_rate(tty); - - /* Select port on the board */ - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - if (!baud) { - /* Drop DTR & exit */ - port->MSVR &= ~(bp->DTR|bp->RTS); - sbus_writeb(port->MSVR, - &bp->r[chip]->r[CD180_MSVR]); - return; - } else { - /* Set DTR on */ - port->MSVR |= bp->DTR; - sbus_writeb(port->MSVR, - &bp->r[chip]->r[CD180_MSVR]); - } - - /* Now we must calculate some speed dependent things. */ - - /* Set baud rate for port. */ - tmp = (((bp->oscfreq + baud/2) / baud + - CD180_TPC/2) / CD180_TPC); - -/* tmp = (bp->oscfreq/7)/baud; - if((tmp%10)>4)tmp=tmp/10+1;else tmp=tmp/10;*/ -/* printk("Prescaler period: %d\n",tmp);*/ - - sbus_writeb((tmp >> 8) & 0xff, - &bp->r[chip]->r[CD180_RBPRH]); - sbus_writeb((tmp >> 8) & 0xff, - &bp->r[chip]->r[CD180_TBPRH]); - sbus_writeb(tmp & 0xff, &bp->r[chip]->r[CD180_RBPRL]); - sbus_writeb(tmp & 0xff, &bp->r[chip]->r[CD180_TBPRL]); - - baud = (baud + 5) / 10; /* Estimated CPS */ - - /* Two timer ticks seems enough to wakeup something like SLIP driver */ - tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO; - port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? - SERIAL_XMIT_SIZE - 1 : tmp); - - /* Receiver timeout will be transmission time for 1.5 chars */ - tmp = (AURORA_TPS + AURORA_TPS/2 + baud/2) / baud; - tmp = (tmp > 0xff) ? 0xff : tmp; - sbus_writeb(tmp, &bp->r[chip]->r[CD180_RTPR]); - - switch (C_CSIZE(tty)) { - case CS5: - cor1 |= COR1_5BITS; - break; - case CS6: - cor1 |= COR1_6BITS; - break; - case CS7: - cor1 |= COR1_7BITS; - break; - case CS8: - cor1 |= COR1_8BITS; - break; - } - - if (C_CSTOPB(tty)) - cor1 |= COR1_2SB; - - cor1 |= COR1_IGNORE; - if (C_PARENB(tty)) { - cor1 |= COR1_NORMPAR; - if (C_PARODD(tty)) - cor1 |= COR1_ODDP; - if (I_INPCK(tty)) - cor1 &= ~COR1_IGNORE; - } - /* Set marking of some errors */ - port->mark_mask = RCSR_OE | RCSR_TOUT; - if (I_INPCK(tty)) - port->mark_mask |= RCSR_FE | RCSR_PE; - if (I_BRKINT(tty) || I_PARMRK(tty)) - port->mark_mask |= RCSR_BREAK; - if (I_IGNPAR(tty)) - port->mark_mask &= ~(RCSR_FE | RCSR_PE); - if (I_IGNBRK(tty)) { - port->mark_mask &= ~RCSR_BREAK; - if (I_IGNPAR(tty)) - /* Real raw mode. Ignore all */ - port->mark_mask &= ~RCSR_OE; - } - /* Enable Hardware Flow Control */ - if (C_CRTSCTS(tty)) { -/*#ifdef AURORA_BRAIN_DAMAGED_CTS - port->SRER |= SRER_DSR | SRER_CTS; - mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; - mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; - tty->hw_stopped = !(aurora_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR)); -#else*/ - port->COR2 |= COR2_CTSAE; -/*#endif*/ - if (bp->flags&AURORA_BOARD_DTR_FLOW_OK) { - mcor1 |= AURORA_RXTH; - } - } - /* Enable Software Flow Control. FIXME: I'm not sure about this */ - /* Some people reported that it works, but I still doubt */ - if (I_IXON(tty)) { - port->COR2 |= COR2_TXIBE; - cor3 |= (COR3_FCT | COR3_SCDE); - if (I_IXANY(tty)) - port->COR2 |= COR2_IXM; - sbus_writeb(START_CHAR(tty), - &bp->r[chip]->r[CD180_SCHR1]); - sbus_writeb(STOP_CHAR(tty), - &bp->r[chip]->r[CD180_SCHR2]); - sbus_writeb(START_CHAR(tty), - &bp->r[chip]->r[CD180_SCHR3]); - sbus_writeb(STOP_CHAR(tty), - &bp->r[chip]->r[CD180_SCHR4]); - } - if (!C_CLOCAL(tty)) { - /* Enable CD check */ - port->SRER |= SRER_CD; - mcor1 |= MCOR1_CDZD; - mcor2 |= MCOR2_CDOD; - } - - if (C_CREAD(tty)) - /* Enable receiver */ - port->SRER |= SRER_RXD; - - /* Set input FIFO size (1-8 bytes) */ - cor3 |= AURORA_RXFIFO; - /* Setting up CD180 channel registers */ - sbus_writeb(cor1, &bp->r[chip]->r[CD180_COR1]); - sbus_writeb(port->COR2, &bp->r[chip]->r[CD180_COR2]); - sbus_writeb(cor3, &bp->r[chip]->r[CD180_COR3]); - /* Make CD180 know about registers change */ - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3, - &bp->r[chip]->r[CD180_CCR]); - /* Setting up modem option registers */ - sbus_writeb(mcor1, &bp->r[chip]->r[CD180_MCOR1]); - sbus_writeb(mcor2, &bp->r[chip]->r[CD180_MCOR2]); - /* Enable CD180 transmitter & receiver */ - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_TXEN | CCR_RXEN, &bp->r[chip]->r[CD180_CCR]); - /* Enable interrupts */ - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - /* And finally set RTS on */ - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); -#ifdef AURORA_DEBUG - printk("aurora_change_speed: end\n"); -#endif -} - -/* Must be called with interrupts enabled */ -static int aurora_setup_port(struct Aurora_board *bp, struct Aurora_port *port) -{ - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_setup_port: start %d\n",port_No(port)); -#endif - if (port->flags & ASYNC_INITIALIZED) - return 0; - - if (!port->xmit_buf) { - /* We may sleep in get_zeroed_page() */ - unsigned long tmp; - - if (!(tmp = get_zeroed_page(GFP_KERNEL))) - return -ENOMEM; - - if (port->xmit_buf) { - free_page(tmp); - return -ERESTARTSYS; - } - port->xmit_buf = (unsigned char *) tmp; - } - - save_flags(flags); cli(); - - if (port->tty) - clear_bit(TTY_IO_ERROR, &port->tty->flags); - -#ifdef MODULE - if ((port->count == 1) && ((++bp->count) == 1)) - bp->flags |= AURORA_BOARD_ACTIVE; -#endif - - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - aurora_change_speed(bp, port); - port->flags |= ASYNC_INITIALIZED; - - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_setup_port: end\n"); -#endif - return 0; -} - -/* Must be called with interrupts disabled */ -static void aurora_shutdown_port(struct Aurora_board *bp, struct Aurora_port *port) -{ - struct tty_struct *tty; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_shutdown_port: start\n"); -#endif - if (!(port->flags & ASYNC_INITIALIZED)) - return; - - chip = AURORA_CD180(port_No(port)); - -#ifdef AURORA_REPORT_OVERRUN - printk("aurora%d: port %d: Total %ld overruns were detected.\n", - board_No(bp), port_No(port), port->overrun); -#endif -#ifdef AURORA_REPORT_FIFO - { - int i; - - printk("aurora%d: port %d: FIFO hits [ ", - board_No(bp), port_No(port)); - for (i = 0; i < 10; i++) { - printk("%ld ", port->hits[i]); - } - printk("].\n"); - } -#endif - if (port->xmit_buf) { - free_page((unsigned long) port->xmit_buf); - port->xmit_buf = NULL; - } - - if (!(tty = port->tty) || C_HUPCL(tty)) { - /* Drop DTR */ - port->MSVR &= ~(bp->DTR|bp->RTS); - sbus_writeb(port->MSVR, - &bp->r[chip]->r[CD180_MSVR]); - } - - /* Select port */ - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - /* Reset port */ - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_SOFTRESET, &bp->r[chip]->r[CD180_CCR]); - - /* Disable all interrupts from this port */ - port->SRER = 0; - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); - port->flags &= ~ASYNC_INITIALIZED; - -#ifdef MODULE - if (--bp->count < 0) { - printk(KERN_DEBUG "aurora%d: aurora_shutdown_port: " - "bad board count: %d\n", - board_No(bp), bp->count); - bp->count = 0; - } - - if (!bp->count) - bp->flags &= ~AURORA_BOARD_ACTIVE; -#endif - -#ifdef AURORA_DEBUG - printk("aurora_shutdown_port: end\n"); -#endif -} - - -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct Aurora_port *port) -{ - DECLARE_WAITQUEUE(wait, current); - struct Aurora_board *bp = port_Board(port); - int retval; - int do_clocal = 0; - int CD; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("block_til_ready: start\n"); -#endif - chip = AURORA_CD180(port_No(port)); - - /* If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->close_wait); - if (port->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - /* If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->open_wait, &wait); - cli(); - if (!tty_hung_up_p(filp)) - port->count--; - sti(); - port->blocked_open++; - while (1) { - cli(); - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - CD = sbus_readb(&bp->r[chip]->r[CD180_MSVR]) & MSVR_CD; - port->MSVR=bp->RTS; - - /* auto drops DTR */ - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); - sti(); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->flags & ASYNC_INITIALIZED)) { - if (port->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->flags & ASYNC_CLOSING) && - (do_clocal || CD)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&port->open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - if (retval) - return retval; - - port->flags |= ASYNC_NORMAL_ACTIVE; -#ifdef AURORA_DEBUG - printk("block_til_ready: end\n"); -#endif - return 0; -} - -static int aurora_open(struct tty_struct * tty, struct file * filp) -{ - int board; - int error; - struct Aurora_port * port; - struct Aurora_board * bp; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_open: start\n"); -#endif - - board = AURORA_BOARD(tty->index); - if (board > AURORA_NBOARD || - !(aurora_board[board].flags & AURORA_BOARD_PRESENT)) { -#ifdef AURORA_DEBUG - printk("aurora_open: error board %d present %d\n", - board, aurora_board[board].flags & AURORA_BOARD_PRESENT); -#endif - return -ENODEV; - } - - bp = &aurora_board[board]; - port = aurora_port + board * AURORA_NPORT * AURORA_NCD180 + AURORA_PORT(tty->index); - if ((aurora_paranoia_check(port, tty->name, "aurora_open")) { -#ifdef AURORA_DEBUG - printk("aurora_open: error paranoia check\n"); -#endif - return -ENODEV; - } - - port->count++; - tty->driver_data = port; - port->tty = tty; - - if ((error = aurora_setup_port(bp, port))) { -#ifdef AURORA_DEBUG - printk("aurora_open: error aurora_setup_port ret %d\n",error); -#endif - return error; - } - - if ((error = block_til_ready(tty, filp, port))) { -#ifdef AURORA_DEBUG - printk("aurora_open: error block_til_ready ret %d\n",error); -#endif - return error; - } - -#ifdef AURORA_DEBUG - printk("aurora_open: end\n"); -#endif - return 0; -} - -static void aurora_close(struct tty_struct * tty, struct file * filp) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned long timeout; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_close: start\n"); -#endif - - if (!port || (aurora_paranoia_check(port, tty->name, "close")) - return; - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - if (tty_hung_up_p(filp)) { - restore_flags(flags); - return; - } - - bp = port_Board(port); - if ((tty->count == 1) && (port->count != 1)) { - printk(KERN_DEBUG "aurora%d: aurora_close: bad port count; " - "tty->count is 1, port count is %d\n", - board_No(bp), port->count); - port->count = 1; - } - if (--port->count < 0) { - printk(KERN_DEBUG "aurora%d: aurora_close: bad port " - "count for tty%d: %d\n", - board_No(bp), port_No(port), port->count); - port->count = 0; - } - if (port->count) { - restore_flags(flags); - return; - } - port->flags |= ASYNC_CLOSING; - - /* Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE){ -#ifdef AURORA_DEBUG - printk("aurora_close: waiting to flush...\n"); -#endif - tty_wait_until_sent(tty, port->closing_wait); - } - - /* At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - port->SRER &= ~SRER_RXD; - if (port->flags & ASYNC_INITIALIZED) { - port->SRER &= ~SRER_TXRDY; - port->SRER |= SRER_TXEMPTY; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies+HZ; - while(port->SRER & SRER_TXEMPTY) { - msleep_interruptible(jiffies_to_msecs(port->timeout)); - if (time_after(jiffies, timeout)) - break; - } - } -#ifdef AURORA_DEBUG - printk("aurora_close: shutdown_port\n"); -#endif - aurora_shutdown_port(bp, port); - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - port->event = 0; - port->tty = 0; - if (port->blocked_open) { - if (port->close_delay) { - msleep_interruptible(jiffies_to_msecs(port->close_delay)); - } - wake_up_interruptible(&port->open_wait); - } - port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->close_wait); - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_close: end\n"); -#endif -} - -static int aurora_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - int c, total = 0; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_write: start %d\n",count); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_write")) - return 0; - - chip = AURORA_CD180(port_No(port)); - - bp = port_Board(port); - - if (!tty || !port->xmit_buf || !tmp_buf) - return 0; - - save_flags(flags); - while (1) { - cli(); - c = min(count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, - SERIAL_XMIT_SIZE - port->xmit_head)); - if (c <= 0) { - restore_flags(flags); - break; - } - memcpy(port->xmit_buf + port->xmit_head, buf, c); - port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - port->xmit_cnt += c; - restore_flags(flags); - - buf += c; - count -= c; - total += c; - } - - cli(); - if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && - !(port->SRER & SRER_TXRDY)) { - port->SRER |= SRER_TXRDY; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - } - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_write: end %d\n",total); -#endif - return total; -} - -static void aurora_put_char(struct tty_struct * tty, unsigned char ch) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_put_char: start %c\n",ch); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_put_char")) - return; - - if (!tty || !port->xmit_buf) - return; - - save_flags(flags); cli(); - - if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { - restore_flags(flags); - return; - } - - port->xmit_buf[port->xmit_head++] = ch; - port->xmit_head &= SERIAL_XMIT_SIZE - 1; - port->xmit_cnt++; - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_put_char: end\n"); -#endif -} - -static void aurora_flush_chars(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned long flags; - unsigned char chip; - -/*#ifdef AURORA_DEBUG - printk("aurora_flush_chars: start\n"); -#endif*/ - if ((aurora_paranoia_check(port, tty->name, "aurora_flush_chars")) - return; - - chip = AURORA_CD180(port_No(port)); - - if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !port->xmit_buf) - return; - - save_flags(flags); cli(); - port->SRER |= SRER_TXRDY; - sbus_writeb(port_No(port) & 7, - &port_Board(port)->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, - &port_Board(port)->r[chip]->r[CD180_SRER]); - restore_flags(flags); -/*#ifdef AURORA_DEBUG - printk("aurora_flush_chars: end\n"); -#endif*/ -} - -static int aurora_write_room(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - int ret; - -#ifdef AURORA_DEBUG - printk("aurora_write_room: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_write_room")) - return 0; - - ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; - if (ret < 0) - ret = 0; -#ifdef AURORA_DEBUG - printk("aurora_write_room: end\n"); -#endif - return ret; -} - -static int aurora_chars_in_buffer(struct tty_struct *tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - - if ((aurora_paranoia_check(port, tty->name, "aurora_chars_in_buffer")) - return 0; - - return port->xmit_cnt; -} - -static void aurora_flush_buffer(struct tty_struct *tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_flush_buffer: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_flush_buffer")) - return; - - save_flags(flags); cli(); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - restore_flags(flags); - - tty_wakeup(tty); -#ifdef AURORA_DEBUG - printk("aurora_flush_buffer: end\n"); -#endif -} - -static int aurora_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board * bp; - unsigned char status,chip; - unsigned int result; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_get_modem_info: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, __FUNCTION__)) - return -ENODEV; - - chip = AURORA_CD180(port_No(port)); - - bp = port_Board(port); - - save_flags(flags); cli(); - - sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - status = sbus_readb(&bp->r[chip]->r[CD180_MSVR]); - result = 0/*bp->r[chip]->r[AURORA_RI] & (1u << port_No(port)) ? 0 : TIOCM_RNG*/; - - restore_flags(flags); - - result |= ((status & bp->RTS) ? TIOCM_RTS : 0) - | ((status & bp->DTR) ? TIOCM_DTR : 0) - | ((status & MSVR_CD) ? TIOCM_CAR : 0) - | ((status & MSVR_DSR) ? TIOCM_DSR : 0) - | ((status & MSVR_CTS) ? TIOCM_CTS : 0); - -#ifdef AURORA_DEBUG - printk("aurora_get_modem_info: end\n"); -#endif - return result; -} - -static int aurora_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned int arg; - unsigned long flags; - struct Aurora_board *bp = port_Board(port); - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_set_modem_info: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, __FUNCTION__)) - return -ENODEV; - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - if (set & TIOCM_RTS) - port->MSVR |= bp->RTS; - if (set & TIOCM_DTR) - port->MSVR |= bp->DTR; - if (clear & TIOCM_RTS) - port->MSVR &= ~bp->RTS; - if (clear & TIOCM_DTR) - port->MSVR &= ~bp->DTR; - - sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); - - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_set_modem_info: end\n"); -#endif - return 0; -} - -static void aurora_send_break(struct Aurora_port * port, unsigned long length) -{ - struct Aurora_board *bp = port_Board(port); - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_send_break: start\n"); -#endif - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - - port->break_length = AURORA_TPS / HZ * length; - port->COR2 |= COR2_ETC; - port->SRER |= SRER_TXRDY; - sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - sbus_writeb(port->COR2, &bp->r[chip]->r[CD180_COR2]); - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - aurora_wait_CCR(bp->r[chip]); - - sbus_writeb(CCR_CORCHG2, &bp->r[chip]->r[CD180_CCR]); - aurora_wait_CCR(bp->r[chip]); - - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_send_break: end\n"); -#endif -} - -static int aurora_set_serial_info(struct Aurora_port * port, - struct serial_struct * newinfo) -{ - struct serial_struct tmp; - struct Aurora_board *bp = port_Board(port); - int change_speed; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_set_serial_info: start\n"); -#endif - if (copy_from_user(&tmp, newinfo, sizeof(tmp))) - return -EFAULT; -#if 0 - if ((tmp.irq != bp->irq) || - (tmp.port != bp->base) || - (tmp.type != PORT_CIRRUS) || - (tmp.baud_base != (bp->oscfreq + CD180_TPC/2) / CD180_TPC) || - (tmp.custom_divisor != 0) || - (tmp.xmit_fifo_size != CD180_NFIFO) || - (tmp.flags & ~AURORA_LEGAL_FLAGS)) - return -EINVAL; -#endif - - change_speed = ((port->flags & ASYNC_SPD_MASK) != - (tmp.flags & ASYNC_SPD_MASK)); - - if (!capable(CAP_SYS_ADMIN)) { - if ((tmp.close_delay != port->close_delay) || - (tmp.closing_wait != port->closing_wait) || - ((tmp.flags & ~ASYNC_USR_MASK) != - (port->flags & ~ASYNC_USR_MASK))) - return -EPERM; - port->flags = ((port->flags & ~ASYNC_USR_MASK) | - (tmp.flags & ASYNC_USR_MASK)); - } else { - port->flags = ((port->flags & ~ASYNC_FLAGS) | - (tmp.flags & ASYNC_FLAGS)); - port->close_delay = tmp.close_delay; - port->closing_wait = tmp.closing_wait; - } - if (change_speed) { - save_flags(flags); cli(); - aurora_change_speed(bp, port); - restore_flags(flags); - } -#ifdef AURORA_DEBUG - printk("aurora_set_serial_info: end\n"); -#endif - return 0; -} - -extern int aurora_get_serial_info(struct Aurora_port * port, - struct serial_struct * retinfo) -{ - struct serial_struct tmp; - struct Aurora_board *bp = port_Board(port); - -#ifdef AURORA_DEBUG - printk("aurora_get_serial_info: start\n"); -#endif - if (!access_ok(VERIFY_WRITE, (void *) retinfo, sizeof(tmp))) - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); - tmp.type = PORT_CIRRUS; - tmp.line = port - aurora_port; - tmp.port = 0; - tmp.irq = bp->irq; - tmp.flags = port->flags; - tmp.baud_base = (bp->oscfreq + CD180_TPC/2) / CD180_TPC; - tmp.close_delay = port->close_delay * HZ/100; - tmp.closing_wait = port->closing_wait * HZ/100; - tmp.xmit_fifo_size = CD180_NFIFO; - copy_to_user(retinfo, &tmp, sizeof(tmp)); -#ifdef AURORA_DEBUG -printk("aurora_get_serial_info: end\n"); -#endif - return 0; -} - -static int aurora_ioctl(struct tty_struct * tty, struct file * filp, - unsigned int cmd, unsigned long arg) - -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - int retval; - -#ifdef AURORA_DEBUG - printk("aurora_ioctl: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_ioctl")) - return -ENODEV; - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (!arg) - aurora_send_break(port, HZ/4); /* 1/4 second */ - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - aurora_send_break(port, arg ? arg*(HZ/10) : HZ/4); - return 0; - case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); - case TIOCSSOFTCAR: - if (get_user(arg,(unsigned long *)arg)) - return -EFAULT; - tty->termios->c_cflag = - ((tty->termios->c_cflag & ~CLOCAL) | - (arg ? CLOCAL : 0)); - return 0; - case TIOCGSERIAL: - return aurora_get_serial_info(port, (struct serial_struct *) arg); - case TIOCSSERIAL: - return aurora_set_serial_info(port, (struct serial_struct *) arg); - default: - return -ENOIOCTLCMD; - }; -#ifdef AURORA_DEBUG - printk("aurora_ioctl: end\n"); -#endif - return 0; -} - -static void aurora_throttle(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_throttle: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_throttle")) - return; - - bp = port_Board(port); - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - port->MSVR &= ~bp->RTS; - sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); - udelay(1); - if (I_IXOFF(tty)) { - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_SSCH2, &bp->r[chip]->r[CD180_CCR]); - aurora_wait_CCR(bp->r[chip]); - } - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_throttle: end\n"); -#endif -} - -static void aurora_unthrottle(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_unthrottle: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_unthrottle")) - return; - - bp = port_Board(port); - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - port->MSVR |= bp->RTS; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - if (I_IXOFF(tty)) { - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_SSCH1, - &bp->r[chip]->r[CD180_CCR]); - aurora_wait_CCR(bp->r[chip]); - } - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_unthrottle: end\n"); -#endif -} - -static void aurora_stop(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_stop: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_stop")) - return; - - bp = port_Board(port); - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - port->SRER &= ~SRER_TXRDY; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, - &bp->r[chip]->r[CD180_SRER]); - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_stop: end\n"); -#endif -} - -static void aurora_start(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_start: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_start")) - return; - - bp = port_Board(port); - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - if (port->xmit_cnt && port->xmit_buf && !(port->SRER & SRER_TXRDY)) { - port->SRER |= SRER_TXRDY; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, - &bp->r[chip]->r[CD180_SRER]); - } - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_start: end\n"); -#endif -} - -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_aurora_hangup() -> tty->hangup() -> aurora_hangup() - * - */ -static void do_aurora_hangup(void *private_) -{ - struct Aurora_port *port = (struct Aurora_port *) private_; - struct tty_struct *tty; - -#ifdef AURORA_DEBUG - printk("do_aurora_hangup: start\n"); -#endif - tty = port->tty; - if (tty != NULL) { - tty_hangup(tty); /* FIXME: module removal race - AKPM */ -#ifdef AURORA_DEBUG - printk("do_aurora_hangup: end\n"); -#endif - } -} - -static void aurora_hangup(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - -#ifdef AURORA_DEBUG - printk("aurora_hangup: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_hangup")) - return; - - bp = port_Board(port); - - aurora_shutdown_port(bp, port); - port->event = 0; - port->count = 0; - port->flags &= ~ASYNC_NORMAL_ACTIVE; - port->tty = 0; - wake_up_interruptible(&port->open_wait); -#ifdef AURORA_DEBUG - printk("aurora_hangup: end\n"); -#endif -} - -static void aurora_set_termios(struct tty_struct * tty, struct termios * old_termios) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_set_termios: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_set_termios")) - return; - - if (tty->termios->c_cflag == old_termios->c_cflag && - tty->termios->c_iflag == old_termios->c_iflag) - return; - - save_flags(flags); cli(); - aurora_change_speed(port_Board(port), port); - restore_flags(flags); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - aurora_start(tty); - } -#ifdef AURORA_DEBUG - printk("aurora_set_termios: end\n"); -#endif -} - -static void do_aurora_bh(void) -{ - run_task_queue(&tq_aurora); -} - -static void do_softint(void *private_) -{ - struct Aurora_port *port = (struct Aurora_port *) private_; - struct tty_struct *tty; - -#ifdef AURORA_DEBUG - printk("do_softint: start\n"); -#endif - tty = port->tty; - if (tty == NULL) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) { - tty_wakeup(tty); - } -#ifdef AURORA_DEBUG - printk("do_softint: end\n"); -#endif -} - -static const struct tty_operations aurora_ops = { - .open = aurora_open, - .close = aurora_close, - .write = aurora_write, - .put_char = aurora_put_char, - .flush_chars = aurora_flush_chars, - .write_room = aurora_write_room, - .chars_in_buffer = aurora_chars_in_buffer, - .flush_buffer = aurora_flush_buffer, - .ioctl = aurora_ioctl, - .throttle = aurora_throttle, - .unthrottle = aurora_unthrottle, - .set_termios = aurora_set_termios, - .stop = aurora_stop, - .start = aurora_start, - .hangup = aurora_hangup, - .tiocmget = aurora_tiocmget, - .tiocmset = aurora_tiocmset, -}; - -static int aurora_init_drivers(void) -{ - int error; - int i; - -#ifdef AURORA_DEBUG - printk("aurora_init_drivers: start\n"); -#endif - tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL); - if (tmp_buf == NULL) { - printk(KERN_ERR "aurora: Couldn't get free page.\n"); - return 1; - } - init_bh(AURORA_BH, do_aurora_bh); - aurora_driver = alloc_tty_driver(AURORA_INPORTS); - if (!aurora_driver) { - printk(KERN_ERR "aurora: Couldn't allocate tty driver.\n"); - free_page((unsigned long) tmp_buf); - return 1; - } - aurora_driver->owner = THIS_MODULE; - aurora_driver->name = "ttyA"; - aurora_driver->major = AURORA_MAJOR; - aurora_driver->type = TTY_DRIVER_TYPE_SERIAL; - aurora_driver->subtype = SERIAL_TYPE_NORMAL; - aurora_driver->init_termios = tty_std_termios; - aurora_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - aurora_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(aurora_driver, &aurora_ops); - error = tty_register_driver(aurora_driver); - if (error) { - put_tty_driver(aurora_driver); - free_page((unsigned long) tmp_buf); - printk(KERN_ERR "aurora: Couldn't register aurora driver, error = %d\n", - error); - return 1; - } - - memset(aurora_port, 0, sizeof(aurora_port)); - for (i = 0; i < AURORA_TNPORTS; i++) { - aurora_port[i].magic = AURORA_MAGIC; - aurora_port[i].tqueue.routine = do_softint; - aurora_port[i].tqueue.data = &aurora_port[i]; - aurora_port[i].tqueue_hangup.routine = do_aurora_hangup; - aurora_port[i].tqueue_hangup.data = &aurora_port[i]; - aurora_port[i].close_delay = 50 * HZ/100; - aurora_port[i].closing_wait = 3000 * HZ/100; - init_waitqueue_head(&aurora_port[i].open_wait); - init_waitqueue_head(&aurora_port[i].close_wait); - } -#ifdef AURORA_DEBUG - printk("aurora_init_drivers: end\n"); -#endif - return 0; -} - -static void aurora_release_drivers(void) -{ -#ifdef AURORA_DEBUG - printk("aurora_release_drivers: start\n"); -#endif - free_page((unsigned long)tmp_buf); - tty_unregister_driver(aurora_driver); - put_tty_driver(aurora_driver); -#ifdef AURORA_DEBUG - printk("aurora_release_drivers: end\n"); -#endif -} - -/* - * Called at boot time. - * - * You can specify IO base for up to RC_NBOARD cards, - * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt. - * Note that there will be no probing at default - * addresses in this case. - * - */ -void __init aurora_setup(char *str, int *ints) -{ - int i; - - for(i=0;(i -#include - -#ifdef __KERNEL__ - -/* This is the number of boards to support. I've only tested this driver with - * one board, so it might not work. - */ -#define AURORA_NBOARD 1 - -/* Useful ? Yes. But you can safely comment the warnings if they annoy you - * (let me say that again: the warnings in the code, not this define). - */ -#define AURORA_PARANOIA_CHECK - -/* Well, after many lost nights, I found that the IRQ for this board is - * selected from four built-in values by writing some bits in the - * configuration register. This causes a little problem to occur: which - * IRQ to select ? Which one is the best for the user ? Well, I finally - * decided for the following algorithm: if the "bintr" value is not acceptable - * (not within type_1_irq[], then test the "intr" value, if that fails too, - * try each value from type_1_irq until succeded. Hope it's ok. - * You can safely reorder the irq's. - */ -#define TYPE_1_IRQS 4 -unsigned char type_1_irq[TYPE_1_IRQS] = { - 3, 5, 9, 13 -}; -/* I know something about another method of interrupt setting, but not enough. - * Also, this is for another type of board, so I first have to learn how to - * detect it. -#define TYPE_2_IRQS 3 -unsigned char type_2_irq[TYPE_2_IRQS] = { - 0, 0, 0 ** could anyone find these for me ? (see AURORA_ALLIRQ below) ** - }; -unsigned char type_2_mask[TYPE_2_IRQS] = { - 32, 64, 128 - }; -*/ - -/* The following section should only be modified by those who know what - * they're doing (or don't, but want to help with some feedback). Modifying - * anything raises a _big_ probability for your system to hang, but the - * sacrifice worths. (I sacrificed my ext2fs many, many times...) - */ - -/* This one tries to dump to console the name of almost every function called, - * and many other debugging info. - */ -#undef AURORA_DEBUG - -/* These are the most dangerous and useful defines. They do printk() during - * the interrupt processing routine(s), so if you manage to get "flooded" by - * irq's, start thinking about the "Power off/on" button... - */ -#undef AURORA_INTNORM /* This one enables the "normal" messages, but some - * of them cause flood, so I preffered putting - * them under a define */ -#undef AURORA_INT_DEBUG /* This one is really bad. */ - -/* Here's something helpful: after n irq's, the board will be disabled. This - * prevents irq flooding during debug (no need to think about power - * off/on anymore...) - */ -#define AURORA_FLOODPRO 10 - -/* This one helps finding which irq the board calls, in case of a strange/ - * unsupported board. AURORA_INT_DEBUG should be enabled, because I don't - * think /proc/interrupts or any command will be available in case of an irq - * flood... "allirq" is the list of all free irq's. - */ -/* -#define AURORA_ALLIRQ 6 -int allirq[AURORA_ALLIRQ]={ - 2,3,5,7,9,13 - }; -*/ - -/* These must not be modified. These values are assumed during the code for - * performance optimisations. - */ -#define AURORA_NCD180 2 /* two chips per board */ -#define AURORA_NPORT 8 /* 8 ports per chip */ - -/* several utilities */ -#define AURORA_BOARD(line) (((line) >> 4) & 0x01) -#define AURORA_CD180(line) (((line) >> 3) & 0x01) -#define AURORA_PORT(line) ((line) & 15) - -#define AURORA_TNPORTS (AURORA_NBOARD*AURORA_NCD180*AURORA_NPORT) - -/* Ticks per sec. Used for setting receiver timeout and break length */ -#define AURORA_TPS 4000 - -#define AURORA_MAGIC 0x0A18 - -/* Yeah, after heavy testing I decided it must be 6. - * Sure, You can change it if needed. - */ -#define AURORA_RXFIFO 6 /* Max. receiver FIFO size (1-8) */ - -#define AURORA_RXTH 7 - -struct aurora_reg1 { - __volatile__ unsigned char r; -}; - -struct aurora_reg128 { - __volatile__ unsigned char r[128]; -}; - -struct aurora_reg4 { - __volatile__ unsigned char r[4]; -}; - -struct Aurora_board { - unsigned long flags; - struct aurora_reg1 * r0; /* This is the board configuration - * register (write-only). */ - struct aurora_reg128 * r[2]; /* These are the registers for the - * two chips. */ - struct aurora_reg4 * r3; /* These are used for hardware-based - * acknowledge. Software-based ack is - * not supported by CD180. */ - unsigned int oscfreq; /* The on-board oscillator - * frequency, in Hz. */ - unsigned char irq; -#ifdef MODULE - signed char count; /* counts the use of the board */ -#endif - /* Values for the dtr_rts swapped mode. */ - unsigned char DTR; - unsigned char RTS; - unsigned char MSVDTR; - unsigned char MSVRTS; - /* Values for hardware acknowledge. */ - unsigned char ACK_MINT, ACK_TINT, ACK_RINT; -}; - -/* Board configuration register */ -#define AURORA_CFG_ENABLE_IO 8 -#define AURORA_CFG_ENABLE_IRQ 4 - -/* Board flags */ -#define AURORA_BOARD_PRESENT 0x00000001 -#define AURORA_BOARD_ACTIVE 0x00000002 -#define AURORA_BOARD_TYPE_2 0x00000004 /* don't know how to - * detect this yet */ -#define AURORA_BOARD_DTR_FLOW_OK 0x00000008 - -/* The story goes like this: Cirrus programmed the CD-180 chip to do automatic - * hardware flow control, and do it using CTS and DTR. CTS is ok, but, if you - * have a modem and the chip drops DTR, then the modem will drop the carrier - * (ain't that cute...). Luckily, the guys at Aurora decided to swap DTR and - * RTS, which makes the flow control usable. I hope that all the boards made - * by Aurora have these two signals swapped. If your's doesn't but you have a - * breakout box, you can try to reverse them yourself, then set the following - * flag. - */ -#undef AURORA_FORCE_DTR_FLOW - -/* In fact, a few more words have to be said about hardware flow control. - * This driver handles "output" flow control through the on-board facility - * CTS Auto Enable. For the "input" flow control there are two cases when - * the flow should be controlled. The first case is when the kernel is so - * busy that it cannot process IRQ's in time; this flow control can only be - * activated by the on-board chip, and if the board has RTS and DTR swapped, - * this facility is usable. The second case is when the application is so - * busy that it cannot receive bytes from the kernel, and this flow must be - * activated by software. This second case is not yet implemented in this - * driver. Unfortunately, I estimate that the second case is the one that - * occurs the most. - */ - - -struct Aurora_port { - int magic; - int baud_base; - int flags; - struct tty_struct * tty; - int count; - int blocked_open; - long event; - int timeout; - int close_delay; - unsigned char * xmit_buf; - int custom_divisor; - int xmit_head; - int xmit_tail; - int xmit_cnt; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - struct tq_struct tqueue; - struct tq_struct tqueue_hangup; - short wakeup_chars; - short break_length; - unsigned short closing_wait; - unsigned char mark_mask; - unsigned char SRER; - unsigned char MSVR; - unsigned char COR2; -#ifdef AURORA_REPORT_OVERRUN - unsigned long overrun; -#endif -#ifdef AURORA_REPORT_FIFO - unsigned long hits[10]; -#endif -}; - -#endif -#endif /*__LINUX_AURORA_H*/ - diff --git a/drivers/sbus/char/cd180.h b/drivers/sbus/char/cd180.h deleted file mode 100644 index 445b86cc65..0000000000 --- a/drivers/sbus/char/cd180.h +++ /dev/null @@ -1,240 +0,0 @@ - -/* Definitions for Cirrus Logic CL-CD180 8-port async mux chip */ -#define CD180_NCH 8 /* Total number of channels */ -#define CD180_TPC 16 /* Ticks per character */ -#define CD180_NFIFO 8 /* TX FIFO size */ - -/* Global registers */ -#define CD180_GFRCR 0x6b /* Global Firmware Revision Code Register */ -#define CD180_SRCR 0x66 /* Service Request Configuration Register */ -#define CD180_PPRH 0x70 /* Prescaler Period Register High */ -#define CD180_PPRL 0x71 /* Prescaler Period Register Low */ -#define CD180_MSMR 0x61 /* Modem Service Match Register */ -#define CD180_TSMR 0x62 /* Transmit Service Match Register */ -#define CD180_RSMR 0x63 /* Receive Service Match Register */ -#define CD180_GSVR 0x40 /* Global Service Vector Register */ -#define CD180_SRSR 0x65 /* Service Request Status Register */ -#define CD180_GSCR 0x41 /* Global Service Channel Register */ -#define CD180_CAR 0x64 /* Channel Access Register */ - -/* Indexed registers */ -#define CD180_RDCR 0x07 /* Receive Data Count Register */ -#define CD180_RDR 0x78 /* Receiver Data Register */ -#define CD180_RCSR 0x7a /* Receiver Character Status Register */ -#define CD180_TDR 0x7b /* Transmit Data Register */ -#define CD180_EOSRR 0x7f /* End of Service Request Register */ - -/* Channel Registers */ -#define CD180_SRER 0x02 /* Service Request Enable Register */ -#define CD180_CCR 0x01 /* Channel Command Register */ -#define CD180_COR1 0x03 /* Channel Option Register 1 */ -#define CD180_COR2 0x04 /* Channel Option Register 2 */ -#define CD180_COR3 0x05 /* Channel Option Register 3 */ -#define CD180_CCSR 0x06 /* Channel Control Status Register */ -#define CD180_RTPR 0x18 /* Receive Timeout Period Register */ -#define CD180_RBPRH 0x31 /* Receive Bit Rate Period Register High */ -#define CD180_RBPRL 0x32 /* Receive Bit Rate Period Register Low */ -#define CD180_TBPRH 0x39 /* Transmit Bit Rate Period Register High */ -#define CD180_TBPRL 0x3a /* Transmit Bit Rate Period Register Low */ -#define CD180_SCHR1 0x09 /* Special Character Register 1 */ -#define CD180_SCHR2 0x0a /* Special Character Register 2 */ -#define CD180_SCHR3 0x0b /* Special Character Register 3 */ -#define CD180_SCHR4 0x0c /* Special Character Register 4 */ -#define CD180_MCR 0x12 /* Modem Change Register */ -#define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */ -#define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */ -#define CD180_MSVR 0x28 /* Modem Signal Value Register */ -#define CD180_MSVRTS 0x29 /* Modem Signal Value RTS */ -#define CD180_MSVDTR 0x2a /* Modem Signal Value DTR */ - -/* Global Interrupt Vector Register (R/W) */ - -#define GSVR_ITMASK 0x07 /* Interrupt type mask */ -#define GSVR_IT_MDM 0x01 /* Modem Signal Change Interrupt */ -#define GSVR_IT_TX 0x02 /* Transmit Data Interrupt */ -#define GSVR_IT_RGD 0x03 /* Receive Good Data Interrupt */ -#define GSVR_IT_REXC 0x07 /* Receive Exception Interrupt */ - - -/* Global Interrupt Channel Register (R/W) */ - -#define GSCR_CHAN 0x1c /* Channel Number Mask */ -#define GSCR_CHAN_OFF 2 /* Channel Number Offset */ - - -/* Channel Address Register (R/W) */ - -#define CAR_CHAN 0x07 /* Channel Number Mask */ - - -/* Receive Character Status Register (R/O) */ - -#define RCSR_TOUT 0x80 /* Rx Timeout */ -#define RCSR_SCDET 0x70 /* Special Character Detected Mask */ -#define RCSR_NO_SC 0x00 /* No Special Characters Detected */ -#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ -#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ -#define RCSR_SC_3 0x30 /* Special Char 3 Detected */ -#define RCSR_SC_4 0x40 /* Special Char 4 Detected */ -#define RCSR_BREAK 0x08 /* Break has been detected */ -#define RCSR_PE 0x04 /* Parity Error */ -#define RCSR_FE 0x02 /* Frame Error */ -#define RCSR_OE 0x01 /* Overrun Error */ - - -/* Channel Command Register (R/W) (commands in groups can be OR-ed) */ - -#define CCR_HARDRESET 0x81 /* Reset the chip */ - -#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ - -#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ -#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ -#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ - -#define CCR_SSCH1 0x21 /* Send Special Character 1 */ - -#define CCR_SSCH2 0x22 /* Send Special Character 2 */ - -#define CCR_SSCH3 0x23 /* Send Special Character 3 */ - -#define CCR_SSCH4 0x24 /* Send Special Character 4 */ - -#define CCR_TXEN 0x18 /* Enable Transmitter */ -#define CCR_RXEN 0x12 /* Enable Receiver */ - -#define CCR_TXDIS 0x14 /* Disable Transmitter */ -#define CCR_RXDIS 0x11 /* Disable Receiver */ - - -/* Service Request Enable Register (R/W) */ - -#define SRER_DSR 0x80 /* Enable interrupt on DSR change */ -#define SRER_CD 0x40 /* Enable interrupt on CD change */ -#define SRER_CTS 0x20 /* Enable interrupt on CTS change */ -#define SRER_RXD 0x10 /* Enable interrupt on Receive Data */ -#define SRER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ -#define SRER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ -#define SRER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ -#define SRER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ - - -/* Channel Option Register 1 (R/W) */ - -#define COR1_ODDP 0x80 /* Odd Parity */ -#define COR1_PARMODE 0x60 /* Parity Mode mask */ -#define COR1_NOPAR 0x00 /* No Parity */ -#define COR1_FORCEPAR 0x20 /* Force Parity */ -#define COR1_NORMPAR 0x40 /* Normal Parity */ -#define COR1_IGNORE 0x10 /* Ignore Parity on RX */ -#define COR1_STOPBITS 0x0c /* Number of Stop Bits */ -#define COR1_1SB 0x00 /* 1 Stop Bit */ -#define COR1_15SB 0x04 /* 1.5 Stop Bits */ -#define COR1_2SB 0x08 /* 2 Stop Bits */ -#define COR1_CHARLEN 0x03 /* Character Length */ -#define COR1_5BITS 0x00 /* 5 bits */ -#define COR1_6BITS 0x01 /* 6 bits */ -#define COR1_7BITS 0x02 /* 7 bits */ -#define COR1_8BITS 0x03 /* 8 bits */ - - -/* Channel Option Register 2 (R/W) */ - -#define COR2_IXM 0x80 /* Implied XON mode */ -#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ -#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ -#define COR2_LLM 0x10 /* Local Loopback Mode */ -#define COR2_RLM 0x08 /* Remote Loopback Mode */ -#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ -#define COR2_CTSAE 0x02 /* CTS Automatic Enable */ -#define COR2_DSRAE 0x01 /* DSR Automatic Enable */ - - -/* Channel Option Register 3 (R/W) */ - -#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ -#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ -#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ -#define COR3_SCDE 0x10 /* Special Character Detection Enable */ -#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ - - -/* Channel Control Status Register (R/O) */ - -#define CCSR_RXEN 0x80 /* Receiver Enabled */ -#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ -#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ -#define CCSR_TXEN 0x08 /* Transmitter Enabled */ -#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ -#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ - - -/* Modem Change Option Register 1 (R/W) */ - -#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ -#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ -#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ -#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ -#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ - - -/* Modem Change Option Register 2 (R/W) */ - -#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ -#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ -#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ - - -/* Modem Change Register (R/W) */ - -#define MCR_DSRCHG 0x80 /* DSR Changed */ -#define MCR_CDCHG 0x40 /* CD Changed */ -#define MCR_CTSCHG 0x20 /* CTS Changed */ - - -/* Modem Signal Value Register (R/W) */ - -#define MSVR_DSR 0x80 /* Current state of DSR input */ -#define MSVR_CD 0x40 /* Current state of CD input */ -#define MSVR_CTS 0x20 /* Current state of CTS input */ -#define MSVR_DTR 0x02 /* Current state of DTR output */ -#define MSVR_RTS 0x01 /* Current state of RTS output */ - - -/* Service Request Status Register */ - -#define SRSR_CMASK 0xC0 /* Current Service Context Mask */ -#define SRSR_CNONE 0x00 /* Not in a service context */ -#define SRSR_CRX 0x40 /* Rx Context */ -#define SRSR_CTX 0x80 /* Tx Context */ -#define SRSR_CMDM 0xC0 /* Modem Context */ -#define SRSR_ANYINT 0x6F /* Any interrupt flag */ -#define SRSR_RINT 0x10 /* Receive Interrupt */ -#define SRSR_TINT 0x04 /* Transmit Interrupt */ -#define SRSR_MINT 0x01 /* Modem Interrupt */ -#define SRSR_REXT 0x20 /* Receive External Interrupt */ -#define SRSR_TEXT 0x08 /* Transmit External Interrupt */ -#define SRSR_MEXT 0x02 /* Modem External Interrupt */ - - -/* Service Request Configuration Register */ - -#define SRCR_PKGTYPE 0x80 -#define SRCR_REGACKEN 0x40 -#define SRCR_DAISYEN 0x20 -#define SRCR_GLOBPRI 0x10 -#define SRCR_UNFAIR 0x08 -#define SRCR_AUTOPRI 0x02 -#define SRCR_PRISEL 0x01 - -/* Values for register-based Interrupt ACKs */ -#define CD180_ACK_MINT 0x75 /* goes to MSMR */ -#define CD180_ACK_TINT 0x76 /* goes to TSMR */ -#define CD180_ACK_RINT 0x77 /* goes to RSMR */ - -/* Escape characters */ - -#define CD180_C_ESC 0x00 /* Escape character */ -#define CD180_C_SBRK 0x81 /* Start sending BREAK */ -#define CD180_C_DELAY 0x82 /* Delay output */ -#define CD180_C_EBRK 0x83 /* Stop sending BREAK */ -- 2.39.5