From c8868611389aa28e0e5e0d63f468727781eac68c Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 23 Sep 2005 09:08:30 -0700 Subject: [PATCH] [PATCH] skge: fix Yukon-Lite A0 workaround This is one of those workarounds sucked over from sk98lin driver. The skge driver needs to detect the Yukon-Lite A0 chip properly, and turn of Rx FIFO Flush. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/net/skge.c b/drivers/net/skge.c index ae1996a3bc..fd398da499 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -1643,6 +1643,22 @@ static void yukon_reset(struct skge_hw *hw, int port) | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); } +/* Apparently, early versions of Yukon-Lite had wrong chip_id? */ +static int is_yukon_lite_a0(struct skge_hw *hw) +{ + u32 reg; + int ret; + + if (hw->chip_id != CHIP_ID_YUKON) + return 0; + + reg = skge_read32(hw, B2_FAR); + skge_write8(hw, B2_FAR + 3, 0xff); + ret = (skge_read8(hw, B2_FAR + 3) != 0); + skge_write32(hw, B2_FAR, reg); + return ret; +} + static void yukon_mac_init(struct skge_hw *hw, int port) { struct skge_port *skge = netdev_priv(hw->dev[port]); @@ -1758,9 +1774,11 @@ static void yukon_mac_init(struct skge_hw *hw, int port) /* Configure Rx MAC FIFO */ skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK); reg = GMF_OPER_ON | GMF_RX_F_FL_ON; - if (hw->chip_id == CHIP_ID_YUKON_LITE && - hw->chip_rev >= CHIP_REV_YU_LITE_A3) + + /* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */ + if (is_yukon_lite_a0(hw)) reg &= ~GMF_RX_F_FL_ON; + skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg); /* -- 2.39.5