From c77a89cd98d99819f23a4a08e5e17ee1f13f6e4d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 16 Oct 2007 22:29:52 +0200 Subject: [PATCH] sis5513: DMA setup fixes * Add sis_ata133_get_base() helper function for obtaining the address of the drive control registers on chipset_family == ATA_133 chipsets. * Add three helper functions for programming PIO/MWDMA timings: - sis_ata16_program_timings() (for ATA_16/33/66/100a chipset families) - sis_ata100_program_timings() (for ATA_100/133a chipset families) - sis_ata133_program_timings() (for ATA_133 chipset family) MWDMA timings are taken from datasheets and they match ATA spec. * Add generic helper function sis_program_timings() and use it in ->set_pio_mode and ->set_dma_mode methods (previously the driver depended on BIOS to program the correct MWDMA timings). * Remove redundant !chipset_family check from init_hwif_sis5513() (init_chipset_sis5513() guarantees that we will never get here if chipset_family cannot be determined). * SWDMA seems to be unsupported by SiS chipsets (no info about SWDMA in datasheets and for SWDMA0 mode timing requirements are impossible to fulfill) so remove ->swdma_mask from init_hwif_sis5513() and handling of SWDMA modes from sis_set_dma_mode(). * Enable DMA support for chipset_family == ATA_16. * Bump driver version. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sis5513.c | 214 +++++++++++++++++++------------------- 1 file changed, 106 insertions(+), 108 deletions(-) diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index b375ee53d6..db8d96bd5a 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/sis5513.c Version 0.27 Jul 14, 2007 + * linux/drivers/ide/pci/sis5513.c Version 0.28 Aug 1, 2007 * * Copyright (C) 1999-2000 Andre Hedrick * Copyright (C) 2002 Lionel Bouton , Maintainer @@ -433,6 +433,95 @@ static int sis_get_info (char *buffer, char **addr, off_t offset, int count) /* * Configuration functions */ + +static u8 sis_ata133_get_base(ide_drive_t *drive) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + u32 reg54 = 0; + + pci_read_config_dword(dev, 0x54, ®54); + + return ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4; +} + +static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + u16 t1 = 0; + u8 drive_pci = 0x40 + drive->dn * 2; + + const u16 pio_timings[] = { 0x000, 0x607, 0x404, 0x303, 0x301 }; + const u16 mwdma_timings[] = { 0x008, 0x302, 0x301 }; + + pci_read_config_word(dev, drive_pci, &t1); + + /* clear active/recovery timings */ + t1 &= ~0x070f; + if (mode >= XFER_MW_DMA_0) { + if (chipset_family > ATA_16) + t1 &= ~0x8000; /* disable UDMA */ + t1 |= mwdma_timings[mode - XFER_MW_DMA_0]; + } else + t1 |= pio_timings[mode - XFER_PIO_0]; + + pci_write_config_word(dev, drive_pci, t1); +} + +static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + u8 t1, drive_pci = 0x40 + drive->dn * 2; + + /* timing bits: 7:4 active 3:0 recovery */ + const u8 pio_timings[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; + const u8 mwdma_timings[] = { 0x08, 0x32, 0x31 }; + + if (mode >= XFER_MW_DMA_0) { + u8 t2 = 0; + + pci_read_config_byte(dev, drive_pci, &t2); + t2 &= ~0x80; /* disable UDMA */ + pci_write_config_byte(dev, drive_pci, t2); + + t1 = mwdma_timings[mode - XFER_MW_DMA_0]; + } else + t1 = pio_timings[mode - XFER_PIO_0]; + + pci_write_config_byte(dev, drive_pci + 1, t1); +} + +static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + u32 t1 = 0; + u8 drive_pci = sis_ata133_get_base(drive), clk, idx; + + pci_read_config_dword(dev, drive_pci, &t1); + + t1 &= 0xc0c00fff; + clk = (t1 & 0x08) ? ATA_133 : ATA_100; + if (mode >= XFER_MW_DMA_0) { + t1 &= ~0x04; /* disable UDMA */ + idx = mode - XFER_MW_DMA_0 + 5; + } + idx = mode - XFER_PIO_0; + t1 |= ini_time_value[clk][idx] << 12; + t1 |= act_time_value[clk][idx] << 16; + t1 |= rco_time_value[clk][idx] << 24; + + pci_write_config_dword(dev, drive_pci, t1); +} + +static void sis_program_timings(ide_drive_t *drive, const u8 mode) +{ + if (chipset_family < ATA_100) /* ATA_16/33/66/100a */ + sis_ata16_program_timings(drive, mode); + else if (chipset_family < ATA_133) /* ATA_100/133a */ + sis_ata100_program_timings(drive, mode); + else /* ATA_133 */ + sis_ata133_program_timings(drive, mode); +} + /* Enables per-drive prefetch and postwrite */ static void config_drive_art_rwp (ide_drive_t *drive) { @@ -450,105 +539,16 @@ static void config_drive_art_rwp (ide_drive_t *drive) pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch); } -/* Set per-drive active and recovery time */ static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - - u8 drive_pci, test1, test2; - config_drive_art_rwp(drive); - - /* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */ - drive_pci = 0x40; - /* In SiS962 case drives sit at (0x40 or 0x70) + 8*drive->dn) */ - if (chipset_family >= ATA_133) { - u32 reg54h; - pci_read_config_dword(dev, 0x54, ®54h); - if (reg54h & 0x40000000) drive_pci = 0x70; - drive_pci += ((drive->dn)*0x4); - } else { - drive_pci += ((drive->dn)*0x2); - } - - /* register layout changed with newer ATA100 chips */ - if (chipset_family < ATA_100) { - pci_read_config_byte(dev, drive_pci, &test1); - pci_read_config_byte(dev, drive_pci+1, &test2); - - /* Clear active and recovery timings */ - test1 &= ~0x0F; - test2 &= ~0x07; - - switch(pio) { - case 4: test1 |= 0x01; test2 |= 0x03; break; - case 3: test1 |= 0x03; test2 |= 0x03; break; - case 2: test1 |= 0x04; test2 |= 0x04; break; - case 1: test1 |= 0x07; test2 |= 0x06; break; - case 0: /* PIO0: register setting == X000 */ - default: break; - } - pci_write_config_byte(dev, drive_pci, test1); - pci_write_config_byte(dev, drive_pci+1, test2); - } else if (chipset_family < ATA_133) { - switch(pio) { /* active recovery - v v */ - case 4: test1 = 0x30|0x01; break; - case 3: test1 = 0x30|0x03; break; - case 2: test1 = 0x40|0x04; break; - case 1: test1 = 0x60|0x07; break; - case 0: test1 = 0x00; break; - default: break; - } - pci_write_config_byte(dev, drive_pci, test1); - } else { /* ATA_133 */ - u32 test3; - pci_read_config_dword(dev, drive_pci, &test3); - test3 &= 0xc0c00fff; - if (test3 & 0x08) { - test3 |= ini_time_value[ATA_133][pio] << 12; - test3 |= act_time_value[ATA_133][pio] << 16; - test3 |= rco_time_value[ATA_133][pio] << 24; - } else { - test3 |= ini_time_value[ATA_100][pio] << 12; - test3 |= act_time_value[ATA_100][pio] << 16; - test3 |= rco_time_value[ATA_100][pio] << 24; - } - pci_write_config_dword(dev, drive_pci, test3); - } + sis_program_timings(drive, XFER_PIO_0 + pio); } static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - u32 regdw; - u8 drive_pci, reg; - - /* See sis_set_pio_mode() for drive PCI config registers */ - drive_pci = 0x40; - if (chipset_family >= ATA_133) { - u32 reg54h; - pci_read_config_dword(dev, 0x54, ®54h); - if (reg54h & 0x40000000) drive_pci = 0x70; - drive_pci += ((drive->dn)*0x4); - pci_read_config_dword(dev, (unsigned long)drive_pci, ®dw); - /* Disable UDMA bit for non UDMA modes on UDMA chips */ - if (speed < XFER_UDMA_0) { - regdw &= 0xfffffffb; - pci_write_config_dword(dev, (unsigned long)drive_pci, regdw); - } - - } else { - drive_pci += ((drive->dn)*0x2); - pci_read_config_byte(dev, drive_pci+1, ®); - /* Disable UDMA bit for non UDMA modes on UDMA chips */ - if ((speed < XFER_UDMA_0) && (chipset_family > ATA_16)) { - reg &= 0x7F; - pci_write_config_byte(dev, drive_pci+1, reg); - } - } /* Config chip for mode */ switch(speed) { @@ -560,6 +560,10 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) case XFER_UDMA_1: case XFER_UDMA_0: if (chipset_family >= ATA_133) { + u32 regdw = 0; + u8 drive_pci = sis_ata133_get_base(drive); + + pci_read_config_dword(dev, drive_pci, ®dw); regdw |= 0x04; regdw &= 0xfffff00f; /* check if ATA133 enable */ @@ -572,6 +576,9 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) } pci_write_config_dword(dev, (unsigned long)drive_pci, regdw); } else { + u8 drive_pci = 0x40 + drive->dn * 2, reg = 0; + + pci_read_config_byte(dev, drive_pci+1, ®); /* Force the UDMA bit on if we want to use UDMA */ reg |= 0x80; /* clean reg cycle time bits */ @@ -586,9 +593,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_MW_DMA_0: - case XFER_SW_DMA_2: - case XFER_SW_DMA_1: - case XFER_SW_DMA_0: + sis_program_timings(drive, speed); break; default: BUG(); @@ -617,11 +622,9 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive) static u8 sis5513_ata133_udma_filter(ide_drive_t *drive) { struct pci_dev *dev = drive->hwif->pci_dev; - int drive_pci; - u32 reg54 = 0, regdw = 0; + u32 regdw = 0; + u8 drive_pci = sis_ata133_get_base(drive); - pci_read_config_dword(dev, 0x54, ®54); - drive_pci = ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4; pci_read_config_dword(dev, drive_pci, ®dw); /* if ATA133 disable, we should not set speed above UDMA5 */ @@ -848,22 +851,17 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) hwif->ultra_mask = udma_rates[chipset_family]; hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; - - if (!chipset_family) - return; if (hwif->cbl != ATA_CBL_PATA40_SHORT) hwif->cbl = ata66_sis5513(hwif); - if (chipset_family > ATA_16) { - hwif->ide_dma_check = &sis5513_config_xfer_rate; - if (!noautodma) - hwif->autodma = 1; - } + hwif->ide_dma_check = &sis5513_config_xfer_rate; + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; hwif->drives[1].autodma = hwif->autodma; - return; } static ide_pci_device_t sis5513_chipset __devinitdata = { -- 2.39.5