From c6c4d7bbbb498c38afa05688dfc2784948a0c4e2 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 11 Oct 2007 01:20:06 +0800 Subject: [PATCH] Blackfin arch: update platform driver resource information to all board files Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/cm_bf533.c | 81 ++- arch/blackfin/mach-bf533/boards/ezkit.c | 91 +++- arch/blackfin/mach-bf533/boards/stamp.c | 119 ++++- arch/blackfin/mach-bf537/boards/cm_bf537.c | 87 +++- .../mach-bf537/boards/generic_board.c | 397 +++++++++++++-- arch/blackfin/mach-bf537/boards/pnav10.c | 53 +- arch/blackfin/mach-bf537/boards/stamp.c | 142 +++++- arch/blackfin/mach-bf548/boards/ezkit.c | 477 +++++++++++++++++- arch/blackfin/mach-bf561/boards/cm_bf561.c | 84 ++- arch/blackfin/mach-bf561/boards/ezkit.c | 82 ++- 10 files changed, 1448 insertions(+), 165 deletions(-) diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 4545f363e6..a57b52d207 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -34,7 +34,9 @@ #include #include #include +#include #include +#include #include /* @@ -93,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -101,7 +103,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -110,24 +112,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -227,6 +245,43 @@ static struct platform_device isp1362_hcd_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 38 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf533_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, @@ -250,7 +305,11 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, #endif }; @@ -261,6 +320,10 @@ static int __init cm_bf533_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 0000b8f123..5c1e35d3c0 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -35,7 +35,9 @@ #include #include #include +#include #include +#include #include /* @@ -50,6 +52,12 @@ static struct platform_device rtc_device = { }; #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", +}; +#endif + /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. @@ -131,7 +139,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -143,7 +151,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -154,24 +162,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -193,13 +217,54 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, #endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) @@ -209,6 +274,10 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init ezkit_init(void) @@ -218,6 +287,10 @@ static int __init ezkit_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index a9143c4cbd..8975e06ea1 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -37,8 +37,11 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif +#include #include +#include #include +#include /* * Name the Board for the /proc/cpuinfo @@ -77,6 +80,12 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", +}; +#endif + #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) static struct resource net2272_bfin_resources[] = { { @@ -177,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -189,7 +198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -200,7 +209,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -210,7 +219,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 0, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -219,7 +228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -231,16 +240,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "fxs-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { .modalias = "fxo-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, @@ -250,7 +259,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad5304_spi", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 2, .platform_data = NULL, .controller_data = &ad5304_chip_info, @@ -259,17 +268,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -309,6 +334,43 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -318,12 +380,16 @@ static struct platform_device *stamp_devices[] __initdata = { &smc91x_device, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) &net2272_bfin_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) @@ -334,6 +400,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init stamp_init(void) @@ -355,8 +425,23 @@ static int __init stamp_init(void) #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif + return 0; } arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ +#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) +# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) + bfin_write_FIO_INEN(~BIT_TO_SET); + bfin_write_FIO_DIR(BIT_TO_SET); + bfin_write_FIO_FLAG_C(BIT_TO_SET); +#endif +} diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index a8f947b727..44dea05e1d 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -35,7 +35,9 @@ #include #include #include +#include #include +#include #include /* @@ -113,7 +115,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -125,7 +127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -136,7 +138,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -146,7 +148,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -156,7 +158,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 7, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -165,7 +167,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -174,17 +176,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -316,6 +334,43 @@ static struct platform_device bfin_mac_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 64 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -347,7 +402,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, #endif }; @@ -358,6 +417,10 @@ static int __init cm_bf537_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 648d984e98..5e9d09eb85 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -34,20 +34,74 @@ #include #include #include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include +#endif +#include #include +#include #include +#include #include +#include +#include /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "UNKNOWN BOARD"; +char *bfin_board_name = "GENERIC Board"; /* * Driver needs to know address, irq and flag pin. */ +#define ISP1761_BASE 0x203C0000 +#define ISP1761_IRQ IRQ_PF7 + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = ISP1761_BASE + 0x00000000, + .end = ISP1761_BASE + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ISP1761_IRQ, + .end = ISP1761_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} + +arch_initcall(bfin_isp1761_init); +#endif + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -58,10 +112,6 @@ static struct resource bfin_pcmcia_cf_resources[] = { .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, { .start = IRQ_PF4, .end = IRQ_PF4, @@ -96,14 +146,7 @@ static struct resource smc91x_resources[] = { .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - /* - * denotes the flag pin and is used directly if - * CONFIG_IRQCHIP_DEMUX_GPIO is defined. - */ + .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -117,6 +160,28 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x203FB800, + .end = 0x203FB800 + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; +#endif + #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) static struct resource sl811_hcd_resources[] = { { @@ -128,12 +193,8 @@ static struct resource sl811_hcd_resources[] = { .end = 0x20340004, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, - .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, + .start = CONFIG_USB_SL811_BFIN_IRQ, + .end = CONFIG_USB_SL811_BFIN_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -141,21 +202,19 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1< #endif #include +#include #include #include @@ -130,15 +131,13 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -323,7 +322,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -336,7 +335,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -348,7 +347,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -357,7 +356,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -366,7 +365,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 7, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -375,7 +374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -396,24 +395,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", }; #endif @@ -469,7 +484,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9c43d77565..47d7d4a0e7 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -37,10 +37,13 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif +#include #include #include #include +#include #include +#include #include /* @@ -199,15 +202,13 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -407,7 +408,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -420,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -432,7 +433,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -441,7 +442,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -450,7 +451,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 0, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -459,7 +460,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -470,16 +471,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "fxs-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { .modalias = "fxo-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, @@ -488,7 +489,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad5304_spi", .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 2, .platform_data = NULL, .controller_data = &ad5304_chip_info, @@ -509,23 +510,45 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", +}; +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", }; #endif @@ -551,9 +574,24 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device i2c_bfin_twi_device = { .name = "i2c-bfin-twi", .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, }; #endif @@ -569,6 +607,43 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, @@ -603,13 +678,17 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) &bfin_fb_device, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif @@ -622,6 +701,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init stamp_init(void) @@ -632,7 +715,18 @@ static int __init stamp_init(void) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 96ad95fab1..2c47db494f 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -35,9 +35,16 @@ #include #include #include -#include #include +#include #include +#include +#include +#include +#include +#include +#include +#include /* * Name the Board for the /proc/cpuinfo @@ -48,6 +55,88 @@ char *bfin_board_name = "ADSP-BF548-EZKIT"; * Driver needs to know address, irq and flag pin. */ +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + +#include + +static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { + .width = 480, + .height = 272, + .xres = {480, 480, 480}, + .yres = {272, 272, 272}, + .bpp = {24, 24, 24}, + .disp = GPIO_PE3, +}; + +static struct resource bf54x_lq043_resources[] = { + { + .start = IRQ_EPPI0_ERR, + .end = IRQ_EPPI0_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_lq043_device = { + .name = "bf54x-lq043", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_lq043_resources), + .resource = bf54x_lq043_resources, + .dev = { + .platform_data = &bf54x_lq043_data, + }, +}; +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +static int bf548_keymap[] = { + KEYVAL(0, 0, KEY_ENTER), + KEYVAL(0, 1, KEY_HELP), + KEYVAL(0, 2, KEY_0), + KEYVAL(0, 3, KEY_BACKSPACE), + KEYVAL(1, 0, KEY_TAB), + KEYVAL(1, 1, KEY_9), + KEYVAL(1, 2, KEY_8), + KEYVAL(1, 3, KEY_7), + KEYVAL(2, 0, KEY_DOWN), + KEYVAL(2, 1, KEY_6), + KEYVAL(2, 2, KEY_5), + KEYVAL(2, 3, KEY_4), + KEYVAL(3, 0, KEY_UP), + KEYVAL(3, 1, KEY_3), + KEYVAL(3, 2, KEY_2), + KEYVAL(3, 3, KEY_1), +}; + +static struct bfin_kpad_platform_data bf54x_kpad_data = { + .rows = 4, + .cols = 4, + .keymap = bf548_keymap, + .keymapsize = ARRAY_SIZE(bf548_keymap), + .repeat = 0, + .debounce_time = 5000, /* ns (5ms) */ + .coldrive_time = 1000, /* ns (1ms) */ + .keyup_test_interval = 50, /* ms (50ms) */ +}; + +static struct resource bf54x_kpad_resources[] = { + { + .start = IRQ_KEY, + .end = IRQ_KEY, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf54x_kpad_device = { + .name = "bf54x-keys", + .id = -1, + .num_resources = ARRAY_SIZE(bf54x_kpad_resources), + .resource = bf54x_kpad_resources, + .dev = { + .platform_data = &bf54x_kpad_data, + }, +}; +#endif + #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { .name = "rtc-bfin", @@ -94,6 +183,344 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +static struct resource smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .start = 0x24000000, + .end = 0x24000000 + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE8, + .end = IRQ_PE8, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; +#endif + +#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) +static struct resource bf54x_hcd_resources[] = { + { + .start = 0xFFC03C00, + .end = 0xFFC040FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bf54x_hcd = { + .name = "bf54x-hcd", + .id = 0, + .num_resources = ARRAY_SIZE(bf54x_hcd_resources), + .resource = bf54x_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xFFC03C00, + .end = 0xFFC040FF, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#ifdef CONFIG_USB_MUSB_OTG + .mode = MUSB_OTG, +#elif CONFIG_USB_MUSB_HDRC_HCD + .mode = MUSB_HOST, +#elif CONFIG_USB_GADGET_MUSB_HDRC + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 1, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +static struct resource bfin_atapi_resources[] = { + { + .start = 0xFFC03800, + .end = 0xFFC0386F, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ATAPI_ERR, + .end = IRQ_ATAPI_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_atapi_device = { + .name = "pata-bf54x", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_atapi_resources), + .resource = bfin_atapi_resources, +}; +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +static struct mtd_partition partition_info[] = { + { + .name = "Linux Kernel", + .offset = 0, + .size = 4 * SIZE_1M, + }, + { + .name = "File System", + .offset = 4 * SIZE_1M, + .size = (256 - 4) * SIZE_1M, + }, +}; + +static struct bf5xx_nand_platform bf5xx_nand_platform = { + .page_size = NFC_PG_SIZE_256, + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bf5xx_nand_resources[] = { + { + .start = 0xFFC03B00, + .end = 0xFFC03B4F, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf5xx_nand_device = { + .name = "bf5xx-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bf5xx_nand_resources), + .resource = bf5xx_nand_resources, + .dev = { + .platform_data = &bf5xx_nand_platform, + }, +}; +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) +static struct platform_device bf54x_sdh_device = { + .name = "bfin-sdh", + .id = 0, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +/* SPI flash chip (m25p16) */ +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel", + .size = 0x1c0000, + .offset = 0x40000 + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, + .cs_change_per_word = 0, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .cs_change_per_word = 1, + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +static struct spi_board_info bf54x_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* SPI_SSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +{ + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PJ11, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, +}, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI0, + .end = CH_SPI0, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI (1) */ +static struct resource bfin_spi1_resource[] = { + [0] = { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI1, + .end = CH_SPI1, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bf54x_spi_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device bf54x_spi_master0 = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bf54x_spi_master_info, /* Passed to driver */ + }, +}; + +static struct platform_device bf54x_spi_master1 = { + .name = "bfin-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bf54x_spi_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI0, + .end = IRQ_TWI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi0_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; + +static struct resource bfin_twi1_resource[] = { + [0] = { + .start = TWI1_REGBASE, + .end = TWI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI1, + .end = IRQ_TWI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi1_device = { + .name = "i2c-bfin-twi", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_twi1_resource), + .resource = bfin_twi1_resource, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -102,12 +529,60 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) + &bf54x_lq043_device, +#endif + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) + &smsc911x_device, +#endif + +#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) + &bf54x_hcd, +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + +#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) + &bfin_atapi_device, +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) + &bf5xx_nand_device, +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) + &bf54x_sdh_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bf54x_spi_master0, +/* &bf54x_spi_master1,*/ +#endif + +#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) + &bf54x_kpad_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi0_device, + &i2c_bfin_twi1_device, +#endif }; static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bf54x_spi_board_info, + ARRAY_SIZE(bf54x_spi_board_info)); +#endif + return 0; } diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 5b2b544529..cd827a1b6b 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -34,7 +34,9 @@ #include #include #include +#include #include +#include #include /* @@ -112,7 +114,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -124,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -135,7 +137,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -144,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -153,7 +155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -162,17 +164,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -256,6 +274,43 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 119 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2400C000, + .end = 0x2400C001F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2400D018, + .end = 0x2400D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf561_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) @@ -271,9 +326,12 @@ static struct platform_device *cm_bf561_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init cm_bf561_init(void) @@ -283,6 +341,10 @@ static int __init cm_bf561_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 724191da20..57e14edca8 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include /* @@ -140,17 +142,33 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { #endif #endif +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; @@ -160,23 +178,63 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif }; +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init ezkit_init(void) @@ -194,7 +252,15 @@ static int __init ezkit_init(void) SSYNC(); #endif - return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif + return 0; } arch_initcall(ezkit_init); -- 2.39.5