From bbadf503d7c7e6efe0a4cd731f8855ba08276215 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 6 Apr 2006 21:46:34 -0700 Subject: [PATCH] [TG3]: Speed up SRAM access (2nd version) Speed up SRAM read and write functions if possible by using MMIO instead of config. cycles. With this change, the post reset signature done at the end of D3 power change must now be moved before the D3 power change. IBM reported a problem on powerpc blades during ethtool self test that was caused by the memory test taking excessively long. Config. cycles are very slow on powerpc and the memory test can take more than 10 seconds to complete using config. cycles. David Miller informed me that an earlier version of the patch caused problems on sparc64 systems with built-in tg3 chips. This version fixes the problem by excluding all SUN built-in tg3 chips from doing MMIO SRAM access. TG3_FLAG_EEPROM_WRITE_PROT is also set unconditionally when TG3_FLG2_SUN_570X is set. This should be sane as all SUN chips are built-in and do not require Vaux switching. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 69 ++++++++++++++++++++++++++++------------------- drivers/net/tg3.h | 1 + 2 files changed, 43 insertions(+), 27 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 376d8e7769..73e271e59c 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -497,21 +497,20 @@ static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val) unsigned long flags; spin_lock_irqsave(&tp->indirect_lock, flags); - pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); - pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val); + if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) { + pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); + pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val); - /* Always leave this as zero. */ - pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0); - spin_unlock_irqrestore(&tp->indirect_lock, flags); -} + /* Always leave this as zero. */ + pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0); + } else { + tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, off); + tw32_f(TG3PCI_MEM_WIN_DATA, val); -static void tg3_write_mem_fast(struct tg3 *tp, u32 off, u32 val) -{ - /* If no workaround is needed, write to mem space directly */ - if (tp->write32 != tg3_write_indirect_reg32) - tw32(NIC_SRAM_WIN_BASE + off, val); - else - tg3_write_mem(tp, off, val); + /* Always leave this as zero. */ + tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, 0); + } + spin_unlock_irqrestore(&tp->indirect_lock, flags); } static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val) @@ -519,11 +518,19 @@ static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val) unsigned long flags; spin_lock_irqsave(&tp->indirect_lock, flags); - pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); - pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val); + if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) { + pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); + pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val); - /* Always leave this as zero. */ - pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0); + /* Always leave this as zero. */ + pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0); + } else { + tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, off); + *val = tr32(TG3PCI_MEM_WIN_DATA); + + /* Always leave this as zero. */ + tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, 0); + } spin_unlock_irqrestore(&tp->indirect_lock, flags); } @@ -1367,12 +1374,12 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) } } + tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN); + /* Finally, set the new power state. */ pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control); udelay(100); /* Delay after power state change */ - tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN); - return 0; } @@ -6539,11 +6546,11 @@ static void tg3_timer(unsigned long __opaque) if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) { u32 val; - tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_MBOX, - FWCMD_NICDRV_ALIVE2); - tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4); + tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, + FWCMD_NICDRV_ALIVE2); + tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4); /* 5 seconds timeout */ - tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5); + tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5); val = tr32(GRC_RX_CPU_EVENT); val |= (1 << 14); tw32(GRC_RX_CPU_EVENT, val); @@ -9539,8 +9546,11 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) tp->led_ctrl = LED_CTRL_MODE_PHY_1; /* Do not even try poking around in here on Sun parts. */ - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) + if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) { + /* All SUN chips are built-in LOMs. */ + tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; return; + } tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val); if (val == NIC_SRAM_DATA_SIG_MAGIC) { @@ -9638,9 +9648,7 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL) tp->led_ctrl = LED_CTRL_MODE_PHY_2; - if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) && - (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) && - (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP)) + if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) { @@ -10265,6 +10273,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd); } + if (tp->write32 == tg3_write_indirect_reg32 || + ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) || + (tp->tg3_flags2 & TG3_FLG2_SUN_570X)) + tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG; + /* Get eeprom hw config before calling tg3_set_power_state(). * In particular, the TG3_FLAG_EEPROM_WRITE_PROT flag must be * determined before calling tg3_set_power_state() so that diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index b6484420e8..8c8b987d12 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2171,6 +2171,7 @@ struct tg3 { #define TG3_FLAG_PCIX_MODE 0x00020000 #define TG3_FLAG_PCI_HIGH_SPEED 0x00040000 #define TG3_FLAG_PCI_32BIT 0x00080000 +#define TG3_FLAG_SRAM_USE_CONFIG 0x00100000 #define TG3_FLAG_SERDES_WOL_CAP 0x00400000 #define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000 #define TG3_FLAG_10_100_ONLY 0x01000000 -- 2.39.5