From b9198c3239a661c468c0f6340c21919b7dd0012f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 4 Sep 2007 23:46:42 -0400 Subject: [PATCH] Input: remove ec3104_keyb driver Now that ec3104 board support has been removed nothing references this driver so it can be safely removed as well. Signed-off-by: Dmitry Torokhov --- drivers/char/ec3104_keyb.c | 457 ------------------------------------- 1 file changed, 457 deletions(-) delete mode 100644 drivers/char/ec3104_keyb.c diff --git a/drivers/char/ec3104_keyb.c b/drivers/char/ec3104_keyb.c deleted file mode 100644 index 020011495d..0000000000 --- a/drivers/char/ec3104_keyb.c +++ /dev/null @@ -1,457 +0,0 @@ -/* - * linux/drivers/char/ec3104_keyb.c - * - * Copyright (C) 2000 Philipp Rumpf - * - * based on linux/drivers/char/pc_keyb.c, which had the following comments: - * - * Separation of the PC low-level part by Geert Uytterhoeven, May 1997 - * See keyboard.c for the whole history. - * - * Major cleanup by Martin Mares, May 1997 - * - * Combined the keyboard and PS/2 mouse handling into one file, - * because they share the same hardware. - * Johan Myreen 1998-10-08. - * - * Code fixes to handle mouse ACKs properly. - * C. Scott Ananian 1999-01-29. - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -/* Some configuration switches are present in the include file... */ - -#include - -#define MSR_CTS 0x10 -#define MCR_RTS 0x02 -#define LSR_DR 0x01 -#define LSR_BOTH_EMPTY 0x60 - -static struct e5_struct { - u8 packet[8]; - int pos; - int length; - - u8 cached_mcr; - u8 last_msr; -} ec3104_keyb; - -/* Simple translation table for the SysRq keys */ - - -#ifdef CONFIG_MAGIC_SYSRQ -unsigned char ec3104_kbd_sysrq_xlate[128] = - "\000\0331234567890-=\177\t" /* 0x00 - 0x0f */ - "qwertyuiop[]\r\000as" /* 0x10 - 0x1f */ - "dfghjkl;'`\000\\zxcv" /* 0x20 - 0x2f */ - "bnm,./\000*\000 \000\201\202\203\204\205" /* 0x30 - 0x3f */ - "\206\207\210\211\212\000\000789-456+1" /* 0x40 - 0x4f */ - "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */ - "\r\000/"; /* 0x60 - 0x6f */ -#endif - -static void kbd_write_command_w(int data); -static void kbd_write_output_w(int data); -#ifdef CONFIG_PSMOUSE -static void aux_write_ack(int val); -static void __aux_write_ack(int val); -#endif - -static DEFINE_SPINLOCK(kbd_controller_lock); -static unsigned char handle_kbd_event(void); - -/* used only by send_data - set by keyboard_interrupt */ -static volatile unsigned char reply_expected; -static volatile unsigned char acknowledge; -static volatile unsigned char resend; - - -int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode) -{ - return 0; -} - -int ec3104_kbd_getkeycode(unsigned int scancode) -{ - return 0; -} - - -/* yes, it probably would be faster to use an array. I don't care. */ - -static inline unsigned char ec3104_scan2key(unsigned char scancode) -{ - switch (scancode) { - case 1: /* '`' */ - return 41; - - case 2 ... 27: - return scancode; - - case 28: /* '\\' */ - return 43; - - case 29 ... 39: - return scancode + 1; - - case 40: /* '\r' */ - return 28; - - case 41 ... 50: - return scancode + 3; - - case 51: /* ' ' */ - return 57; - - case 52: /* escape */ - return 1; - - case 54: /* insert/delete (labelled delete) */ - /* this should arguably be 110, but I'd like to have ctrl-alt-del - * working with a standard keymap */ - return 111; - - case 55: /* left */ - return 105; - case 56: /* home */ - return 102; - case 57: /* end */ - return 107; - case 58: /* up */ - return 103; - case 59: /* down */ - return 108; - case 60: /* pgup */ - return 104; - case 61: /* pgdown */ - return 109; - case 62: /* right */ - return 106; - - case 79 ... 88: /* f1 - f10 */ - return scancode - 20; - - case 89 ... 90: /* f11 - f12 */ - return scancode - 2; - - case 91: /* left shift */ - return 42; - - case 92: /* right shift */ - return 54; - - case 93: /* left alt */ - return 56; - case 94: /* right alt */ - return 100; - case 95: /* left ctrl */ - return 29; - case 96: /* right ctrl */ - return 97; - - case 97: /* caps lock */ - return 58; - case 102: /* left windows */ - return 125; - case 103: /* right windows */ - return 126; - - case 106: /* Fn */ - /* this is wrong. */ - return 84; - - default: - return 0; - } -} - -int ec3104_kbd_translate(unsigned char scancode, unsigned char *keycode, - char raw_mode) -{ - scancode &= 0x7f; - - *keycode = ec3104_scan2key(scancode); - - return 1; -} - -char ec3104_kbd_unexpected_up(unsigned char keycode) -{ - return 0200; -} - -static inline void handle_keyboard_event(unsigned char scancode) -{ -#ifdef CONFIG_VT - handle_scancode(scancode, !(scancode & 0x80)); -#endif - tasklet_schedule(&keyboard_tasklet); -} - -void ec3104_kbd_leds(unsigned char leds) -{ -} - -static u8 e5_checksum(u8 *packet, int count) -{ - int i; - u8 sum = 0; - - for (i=0; i", byte); - - ctrl_outb(byte, EC3104_SER4_DATA); - - do { - status = ctrl_inb(EC3104_SER4_LSR); - } while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY); - -} - -static int e5_send_packet(u8 *packet, int count, struct e5_struct *k) -{ - int i; - - disable_irq(EC3104_IRQ_SER4); - - if (k->cached_mcr & MCR_RTS) { - printk("e5_send_packet: too slow\n"); - enable_irq(EC3104_IRQ_SER4); - return -EAGAIN; - } - - k->cached_mcr |= MCR_RTS; - ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); - - e5_wait_for_cts(k); - - printk("p: "); - - for(i=0; icached_mcr &= ~MCR_RTS; - ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); - - set_current_state(TASK_UNINTERRUPTIBLE); - - - - enable_irq(EC3104_IRQ_SER4); - - - - return 0; -} - -/* - * E5 packets we know about: - * E5->host 0x80 0x05 - resend packet - * host->E5 0x83 0x43 - set LCD contrast - * host->E5 0x85 0x41 0x02 0x02 - set LCD backlight - * E5->host 0x87 0x00 - external PS2 - * E5->host 0x88 - key press - */ - -static void e5_receive(struct e5_struct *k) -{ - k->packet[k->pos++] = ctrl_inb(EC3104_SER4_DATA); - - if (k->pos == 1) { - switch(k->packet[0]) { - case 0x80: - k->length = 3; - break; - - case 0x87: /* PS2 ext */ - k->length = 6; - break; - - case 0x88: /* keyboard */ - k->length = 3; - break; - - default: - k->length = 1; - printk(KERN_WARNING "unknown E5 packet %02x\n", - k->packet[0]); - } - } - - if (k->pos == k->length) { - int i; - - if (e5_checksum(k->packet, k->length) != 0) - printk(KERN_WARNING "E5: wrong checksum\n"); - -#if 0 - printk("E5 packet ["); - for(i=0; ilength; i++) { - printk("%02x ", k->packet[i]); - } - - printk("(%02x)]\n", e5_checksum(k->packet, k->length-1)); -#endif - - switch(k->packet[0]) { - case 0x80: - case 0x88: - handle_keyboard_event(k->packet[1]); - break; - } - - k->pos = k->length = 0; - } -} - -static void ec3104_keyb_interrupt(int irq, void *data) -{ - struct e5_struct *k = &ec3104_keyb; - u8 msr, lsr; - - msr = ctrl_inb(EC3104_SER4_MSR); - - if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) { - if (k->cached_mcr & MCR_RTS) - printk("confused: RTS already high\n"); - /* CTS went high. Send RTS. */ - k->cached_mcr |= MCR_RTS; - - ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); - } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) { - /* CTS went low. */ - if (!(k->cached_mcr & MCR_RTS)) - printk("confused: RTS already low\n"); - - k->cached_mcr &= ~MCR_RTS; - - ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); - } - - k->last_msr = msr; - - lsr = ctrl_inb(EC3104_SER4_LSR); - - if (lsr & LSR_DR) - e5_receive(k); -} - -static void ec3104_keyb_clear_state(void) -{ - struct e5_struct *k = &ec3104_keyb; - u8 msr, lsr; - - /* we want CTS to be low */ - k->last_msr = 0; - - for (;;) { - msleep(100); - - msr = ctrl_inb(EC3104_SER4_MSR); - - lsr = ctrl_inb(EC3104_SER4_LSR); - - if (lsr & LSR_DR) { - e5_receive(k); - continue; - } - - if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) { - if (k->cached_mcr & MCR_RTS) - printk("confused: RTS already high\n"); - /* CTS went high. Send RTS. */ - k->cached_mcr |= MCR_RTS; - - ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); - } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) { - /* CTS went low. */ - if (!(k->cached_mcr & MCR_RTS)) - printk("confused: RTS already low\n"); - - k->cached_mcr &= ~MCR_RTS; - - ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); - } else - break; - - k->last_msr = msr; - - continue; - } -} - -void __init ec3104_kbd_init_hw(void) -{ - ec3104_keyb.last_msr = ctrl_inb(EC3104_SER4_MSR); - ec3104_keyb.cached_mcr = ctrl_inb(EC3104_SER4_MCR); - - ec3104_keyb_clear_state(); - - /* Ok, finally allocate the IRQ, and off we go.. */ - request_irq(EC3104_IRQ_SER4, ec3104_keyb_interrupt, 0, "keyboard", NULL); -} -- 2.39.5