From b7e89214aadf82fa5eaff28f50f2078fa6ae773c Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Thu, 7 Sep 2006 13:27:58 -0500 Subject: [PATCH] [POWERPC] PPC 4xx: Enable XMON on PPC 4xx boards The following patch allows XMON to run on the 4xx platform. Tested on Walnut, Ebony, and Nova (440GX based) eval boards. 440EP, 440SP, and 440SPE boards should work as well. Patch is against 2.6.18-rc6. Signed-off-by: Josh Boyer Signed-off-by: Paul Mackerras --- arch/ppc/xmon/start.c | 28 ++++++++++++++++++---------- arch/ppc/xmon/xmon.c | 26 ++++++++++++++++++++------ 2 files changed, 38 insertions(+), 16 deletions(-) diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index f7e9298695..d74a883e5b 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -15,6 +15,7 @@ #include #include #include +#include static volatile unsigned char *sccc, *sccd; unsigned int TXRDY, RXRDY, DLAB; @@ -57,23 +58,30 @@ static struct sysrq_key_op sysrq_xmon_op = void xmon_map_scc(void) { -#ifdef CONFIG_PPC_PREP - volatile unsigned char *base; - -#elif defined(CONFIG_GEMINI) +#if defined(CONFIG_GEMINI) /* should already be mapped by the kernel boot */ - sccc = (volatile unsigned char *) 0xffeffb0d; sccd = (volatile unsigned char *) 0xffeffb08; - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; #elif defined(CONFIG_405GP) - sccc = (volatile unsigned char *)0xef600305; sccd = (volatile unsigned char *)0xef600300; +#elif defined(CONFIG_440EP) + sccd = (volatile unsigned char *) ioremap(PPC440EP_UART0_ADDR, 8); +#elif defined(CONFIG_440SP) + sccd = (volatile unsigned char *) ioremap64(PPC440SP_UART0_ADDR, 8); +#elif defined(CONFIG_440SPE) + sccd = (volatile unsigned char *) ioremap64(PPC440SPE_UART0_ADDR, 8); +#elif defined(CONFIG_44x) + /* This is the default for 44x platforms. Any boards that have a + different UART address need to be put in cases before this or the + port will be mapped incorrectly */ + sccd = (volatile unsigned char *) ioremap64(PPC440GP_UART0_ADDR, 8); +#endif /* platform */ + +#ifndef CONFIG_PPC_PREP + sccc = sccd + 5; TXRDY = 0x20; RXRDY = 1; DLAB = 0x80; -#endif /* platform */ +#endif register_sysrq_key('x', &sysrq_xmon_op); } diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index 37d234f933..25d032b2ae 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -153,6 +153,12 @@ static int xmon_trace[NR_CPUS]; #define SSTEP 1 /* stepping because of 's' command */ #define BRSTEP 2 /* stepping over breakpoint */ +#ifdef CONFIG_4xx +#define MSR_SSTEP_ENABLE 0x200 +#else +#define MSR_SSTEP_ENABLE 0x400 +#endif + static struct pt_regs *xmon_regs[NR_CPUS]; extern inline void sync(void) @@ -211,6 +217,14 @@ static void get_tb(unsigned *p) p[1] = lo; } +static inline void xmon_enable_sstep(struct pt_regs *regs) +{ + regs->msr |= MSR_SSTEP_ENABLE; +#ifdef CONFIG_4xx + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM); +#endif +} + int xmon(struct pt_regs *excp) { struct pt_regs regs; @@ -254,10 +268,10 @@ int xmon(struct pt_regs *excp) cmd = cmds(excp); if (cmd == 's') { xmon_trace[smp_processor_id()] = SSTEP; - excp->msr |= 0x400; + xmon_enable_sstep(excp); } else if (at_breakpoint(excp->nip)) { xmon_trace[smp_processor_id()] = BRSTEP; - excp->msr |= 0x400; + xmon_enable_sstep(excp); } else { xmon_trace[smp_processor_id()] = 0; insert_bpts(); @@ -298,7 +312,7 @@ xmon_bpt(struct pt_regs *regs) remove_bpts(); excprint(regs); xmon_trace[smp_processor_id()] = BRSTEP; - regs->msr |= 0x400; + xmon_enable_sstep(regs); } else { xmon(regs); } @@ -385,7 +399,7 @@ insert_bpts(void) } store_inst((void *) bp->address); } -#if !defined(CONFIG_8xx) +#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx)) if (dabr.enabled) set_dabr(dabr.address); if (iabr.enabled) @@ -400,7 +414,7 @@ remove_bpts(void) struct bpt *bp; unsigned instr; -#if !defined(CONFIG_8xx) +#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx)) set_dabr(0); set_iabr(0); #endif @@ -677,7 +691,7 @@ bpt_cmds(void) cmd = inchar(); switch (cmd) { -#if !defined(CONFIG_8xx) +#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx)) case 'd': mode = 7; cmd = inchar(); -- 2.39.5