From b562468cc3bd0c81decba1f5f39a7173f839e57e Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 31 Mar 2008 19:34:40 -0400 Subject: [PATCH] sata_mv clean up mv_stop_edma usage Clean up uses of mv_stop_edma{_engine}() to match datasheet requirements. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 87 +++++++++++++++++++++---------------------- 1 file changed, 42 insertions(+), 45 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index ee6ca97c45..5b9f937d0f 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -517,7 +517,7 @@ static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio); static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); static int mv_stop_edma(struct ata_port *ap); -static int mv_stop_edma_engine(struct ata_port *ap); +static int mv_stop_edma_engine(void __iomem *port_mmio); static void mv_edma_cfg(struct ata_port *ap, int want_ncq); /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below @@ -805,7 +805,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0); if (want_ncq != using_ncq) - mv_stop_edma_engine(ap); + mv_stop_edma(ap); } if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) { struct mv_host_priv *hpriv = ap->host->private_data; @@ -841,57 +841,41 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, /** * mv_stop_edma_engine - Disable eDMA engine - * @ap: ATA channel to manipulate - * - * Verify the local cache of the eDMA state is accurate with a - * WARN_ON. + * @port_mmio: io base address * * LOCKING: * Inherited from caller. */ -static int mv_stop_edma_engine(struct ata_port *ap) +static int mv_stop_edma_engine(void __iomem *port_mmio) { - void __iomem *port_mmio = mv_ap_base(ap); - struct mv_port_priv *pp = ap->private_data; - u32 reg; - int i, err = 0; + int i; - if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { - /* Disable EDMA if active. The disable bit auto clears. - */ - writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); - pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - } else { - WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); - } + /* Disable eDMA. The disable bit auto clears. */ + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); - /* now properly wait for the eDMA to stop */ - for (i = 1000; i > 0; i--) { - reg = readl(port_mmio + EDMA_CMD_OFS); + /* Wait for the chip to confirm eDMA is off. */ + for (i = 10000; i > 0; i--) { + u32 reg = readl(port_mmio + EDMA_CMD_OFS); if (!(reg & EDMA_EN)) - break; - - udelay(100); - } - - if (reg & EDMA_EN) { - ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); - err = -EIO; + return 0; + udelay(10); } - - return err; + return -EIO; } static int mv_stop_edma(struct ata_port *ap) { - unsigned long flags; - int rc; - - spin_lock_irqsave(&ap->host->lock, flags); - rc = mv_stop_edma_engine(ap); - spin_unlock_irqrestore(&ap->host->lock, flags); + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; - return rc; + if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) + return 0; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + if (mv_stop_edma_engine(port_mmio)) { + ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); + return -EIO; + } + return 0; } #ifdef ATA_DEBUG @@ -1401,7 +1385,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) * port. Turn off EDMA so there won't be problems accessing * shadow block, etc registers. */ - mv_stop_edma_engine(ap); + mv_stop_edma(ap); return ata_qc_issue_prot(qc); } @@ -1915,8 +1899,12 @@ static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, { void __iomem *port_mmio = mv_port_base(mmio, port); - writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); - + /* + * The datasheet warns against setting ATA_RST when EDMA is active + * (but doesn't say what the problem might be). So we first try + * to disable the EDMA engine before doing the ATA_RST operation. + */ + mv_stop_edma_engine(port_mmio); mv_reset_channel(hpriv, mmio, port); ZERO(0x028); /* command */ @@ -2191,8 +2179,12 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv, { void __iomem *port_mmio = mv_port_base(mmio, port); - writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); - + /* + * The datasheet warns against setting ATA_RST when EDMA is active + * (but doesn't say what the problem might be). So we first try + * to disable the EDMA engine before doing the ATA_RST operation. + */ + mv_stop_edma_engine(port_mmio); mv_reset_channel(hpriv, mmio, port); ZERO(0x028); /* command */ @@ -2250,6 +2242,10 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio) return; } +/* + * Caller must ensure that EDMA is not active, + * by first doing mv_stop_edma() where needed. + */ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no) { @@ -2392,10 +2388,11 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, { struct ata_port *ap = link->ap; struct mv_host_priv *hpriv = ap->host->private_data; + struct mv_port_priv *pp = ap->private_data; void __iomem *mmio = hpriv->base; - mv_stop_edma(ap); mv_reset_channel(hpriv, mmio, ap->port_no); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; mv_phy_reset(ap, class, deadline); return 0; -- 2.39.5