From b228f4c54df37b53c6f364aa7f3efa4280bcc4f0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 11 Dec 2006 15:33:30 +0000 Subject: [PATCH] [MIPS] Malta: Resurrect MTD support for onboard flash. Signed-off-by: Ralf Baechle --- arch/mips/configs/malta_defconfig | 80 ++++++++++++++++++++++- arch/mips/mips-boards/malta/Makefile | 2 +- arch/mips/mips-boards/malta/malta_setup.c | 39 ----------- 3 files changed, 80 insertions(+), 41 deletions(-) diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 1f9300f37f..96e941084c 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -644,7 +644,85 @@ CONFIG_CONNECTOR=m # # Memory Technology Devices (MTD) # -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set # # Parallel port support diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 77ee5c6d33..b662c75fb2 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,5 +19,5 @@ # under Linux. # -obj-y := malta_int.o malta_setup.o +obj-y := malta_int.o malta_mtd.o malta_setup.o obj-$(CONFIG_SMP) += malta_smp.o diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c index 282f3e52ee..56ea76679c 100644 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ b/arch/mips/mips-boards/malta/malta_setup.c @@ -21,13 +21,6 @@ #include #include -#ifdef CONFIG_MTD -#include -#include -#include -#include -#endif - #include #include #include @@ -58,30 +51,6 @@ struct resource standard_io_resources[] = { { .name = "dma2", .start = 0xc0, .end = 0xdf, .flags = IORESOURCE_BUSY }, }; -#ifdef CONFIG_MTD -static struct mtd_partition malta_mtd_partitions[] = { - { - .name = "YAMON", - .offset = 0x0, - .size = 0x100000, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "User FS", - .offset = 0x100000, - .size = 0x2e0000 - }, - { - .name = "Board Config", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE - } -}; - -#define number_partitions (sizeof(malta_mtd_partitions)/sizeof(struct mtd_partition)) -#endif - const char *get_system_type(void) { return "MIPS Malta"; @@ -211,14 +180,6 @@ void __init plat_mem_setup(void) #endif #endif -#ifdef CONFIG_MTD - /* - * Support for MTD on Malta. Use the generic physmap driver - */ - physmap_configure(0x1e000000, 0x400000, 4, NULL); - physmap_set_partitions(malta_mtd_partitions, number_partitions); -#endif - mips_reboot_setup(); board_time_init = mips_time_init; -- 2.39.5