From b2248dac07cf057e4af3ec970e7d36a09f44fac8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Mar 2007 02:38:11 -0800 Subject: [PATCH] pata_cmd640: CMD640 PCI support Support for the PCI CMD640 (not VLB) Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 10 ++ drivers/ata/Makefile | 1 + drivers/ata/pata_cmd640.c | 298 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 309 insertions(+) create mode 100644 drivers/ata/pata_cmd640.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 7bdbe5a914..1410907d1e 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -209,6 +209,16 @@ config PATA_ATIIXP If unsure, say N. +config PATA_CMD640_PCI + tristate "CMD640 PCI PATA support (Very Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the CMD640 PCI IDE + interface chip. Only the primary channel is currently + supported. + + If unsure, say N. + config PATA_CMD64X tristate "CMD64x PATA support (Very Experimental)" depends on PCI&& EXPERIMENTAL diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 13d7397e00..b7055e3026 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_PATA_ALI) += pata_ali.o obj-$(CONFIG_PATA_AMD) += pata_amd.o obj-$(CONFIG_PATA_ARTOP) += pata_artop.o obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o +obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c new file mode 100644 index 0000000000..4d01d46924 --- /dev/null +++ b/drivers/ata/pata_cmd640.c @@ -0,0 +1,298 @@ +/* + * pata_cmd640.c - CMD640 PCI PATA for new ATA layer + * (C) 2007 Red Hat Inc + * Alan Cox + * + * Based upon + * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 + * + * Copyright (C) 1995-1996 Linus Torvalds & authors (see driver) + * + * This drives only the PCI version of the controller. If you have a + * VLB one then we have enough docs to support it but you can write + * your own code. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_cmd640" +#define DRV_VERSION "0.0.3" + +struct cmd640_reg { + int last; + u8 reg58[ATA_MAX_DEVICES]; +}; + +enum { + CFR = 0x50, + CNTRL = 0x51, + CMDTIM = 0x52, + ARTIM0 = 0x53, + DRWTIM0 = 0x54, + ARTIM23 = 0x57, + DRWTIM23 = 0x58, + BRST = 0x59 +}; + +/** + * cmd640_set_piomode - set initial PIO mode data + * @adev: ATA device + * + * Called to do the PIO mode setup. + */ + +static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct cmd640_reg *timing = ap->private_data; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_timing t; + const unsigned long T = 1000000 / 33; + const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; + u8 reg; + int arttim = ARTIM0 + 2 * adev->devno; + struct ata_device *pair = ata_dev_pair(adev); + + if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { + printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); + return; + } + + /* The second channel has shared timings and the setup timing is + messy to switch to merge it for worst case */ + if (ap->port_no && pair) { + struct ata_timing p; + ata_timing_compute(pair, pair->pio_mode, &p, T, 1); + ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP); + } + + /* Make the timings fit */ + if (t.recover > 16) { + t.active += t.recover - 16; + t.recover = 16; + } + if (t.active > 16) + t.active = 16; + + /* Now convert the clocks into values we can actually stuff into + the chip */ + + if (t.recover > 1) + t.recover--; /* 640B only */ + else + t.recover = 15; + + if (t.setup > 4) + t.setup = 0xC0; + else + t.setup = setup_data[t.setup]; + + if (ap->port_no == 0) { + t.active &= 0x0F; /* 0 = 16 */ + + /* Load setup timing */ + pci_read_config_byte(pdev, arttim, ®); + reg &= 0x3F; + reg |= t.setup; + pci_write_config_byte(pdev, arttim, reg); + + /* Load active/recovery */ + pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover); + } else { + /* Save the shared timings for channel, they will be loaded + by qc_issue_prot. Reloading the setup time is expensive + so we keep a merged one loaded */ + pci_read_config_byte(pdev, ARTIM23, ®); + reg &= 0x3F; + reg |= t.setup; + pci_write_config_byte(pdev, ARTIM23, reg); + timing->reg58[adev->devno] = (t.active << 4) | t.recover; + } +} + + +/** + * cmd640_qc_issue_prot - command preparation hook + * @qc: Command to be issued + * + * Channel 1 has shared timings. We must reprogram the + * clock each drive 2/3 switch we do. + */ + +static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct cmd640_reg *timing = ap->private_data; + + if (ap->port_no != 0 && adev->devno != timing->last) { + pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]); + timing->last = adev->devno; + } + return ata_qc_issue_prot(qc); +} + +/** + * cmd640_port_start - port setup + * @ap: ATA port being set up + * + * The CMD640 needs to maintain private data structures so we + * allocate space here. + */ + +static int cmd640_port_start(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct cmd640_reg *timing; + + int ret = ata_port_start(ap); + if (ret < 0) + return ret; + + timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL); + if (timing == NULL) + return -ENOMEM; + timing->last = -1; /* Force a load */ + ap->private_data = timing; + return ret; +} + +static struct scsi_host_template cmd640_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, +}; + +static struct ata_port_operations cmd640_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = cmd640_set_piomode, + .mode_filter = ata_pci_default_filter, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = cmd640_qc_issue_prot, + + /* In theory this is not needed once we kill the prefetcher */ + .data_xfer = ata_data_xfer_noirq, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, + + .port_start = cmd640_port_start, +}; + +static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + u8 r; + u8 ctrl; + + static struct ata_port_info info = { + .sht = &cmd640_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &cmd640_port_ops + }; + + static struct ata_port_info *port_info[2] = { &info, &info }; + + /* CMD640 detected, commiserations */ + pci_write_config_byte(pdev, 0x5C, 0x00); + /* Get version info */ + pci_read_config_byte(pdev, CFR, &r); + /* PIO0 command cycles */ + pci_write_config_byte(pdev, CMDTIM, 0); + /* 512 byte bursts (sector) */ + pci_write_config_byte(pdev, BRST, 0x40); + /* + * A reporter a long time ago + * Had problems with the data fifo + * So don't run the risk + * Of putting crap on the disk + * For its better just to go slow + */ + /* Do channel 0 */ + pci_read_config_byte(pdev, CNTRL, &ctrl); + pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0); + /* Ditto for channel 1 */ + pci_read_config_byte(pdev, ARTIM23, &ctrl); + ctrl |= 0x0C; + pci_write_config_byte(pdev, ARTIM23, ctrl); + + return ata_pci_init_one(pdev, port_info, 2); +} + +static int cmd640_reinit_one(struct pci_dev *pdev) +{ + return ata_pci_device_resume(pdev); +} + +static const struct pci_device_id cmd640[] = { + { PCI_VDEVICE(CMD, 0x640), 0 }, + { }, +}; + +static struct pci_driver cmd640_pci_driver = { + .name = DRV_NAME, + .id_table = cmd640, + .probe = cmd640_init_one, + .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = cmd640_reinit_one, +}; + +static int __init cmd640_init(void) +{ + return pci_register_driver(&cmd640_pci_driver); +} + +static void __exit cmd640_exit(void) +{ + pci_unregister_driver(&cmd640_pci_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cmd640); +MODULE_VERSION(DRV_VERSION); + +module_init(cmd640_init); +module_exit(cmd640_exit); -- 2.39.5