From ad3caddaa1708e506f20b8e25a4a8ae586fc7d5b Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 13 Jun 2006 08:46:57 +0200 Subject: [PATCH] [PATCH] Get rid of struct request request_pm_state member The IDE power management can just use the ->end_io_data member to store it's data. Signed-off-by: Jens Axboe --- drivers/ide/ide-io.c | 91 ++++++++++++++++++++++++------------------ drivers/ide/ide.c | 4 +- include/linux/blkdev.h | 5 --- 3 files changed, 54 insertions(+), 46 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c01615dec2..4f2f138de2 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -142,38 +142,41 @@ enum { static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error) { + struct request_pm_state *pm = rq->end_io_data; + if (drive->media != ide_disk) return; - switch (rq->pm->pm_step) { + switch (pm->pm_step) { case ide_pm_flush_cache: /* Suspend step 1 (flush cache) complete */ - if (rq->pm->pm_state == PM_EVENT_FREEZE) - rq->pm->pm_step = ide_pm_state_completed; + if (pm->pm_state == PM_EVENT_FREEZE) + pm->pm_step = ide_pm_state_completed; else - rq->pm->pm_step = idedisk_pm_standby; + pm->pm_step = idedisk_pm_standby; break; case idedisk_pm_standby: /* Suspend step 2 (standby) complete */ - rq->pm->pm_step = ide_pm_state_completed; + pm->pm_step = ide_pm_state_completed; break; case idedisk_pm_idle: /* Resume step 1 (idle) complete */ - rq->pm->pm_step = ide_pm_restore_dma; + pm->pm_step = ide_pm_restore_dma; break; } } static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) { + struct request_pm_state *pm = rq->end_io_data; ide_task_t *args = rq->special; memset(args, 0, sizeof(*args)); if (drive->media != ide_disk) { /* skip idedisk_pm_idle for ATAPI devices */ - if (rq->pm->pm_step == idedisk_pm_idle) - rq->pm->pm_step = ide_pm_restore_dma; + if (pm->pm_step == idedisk_pm_idle) + pm->pm_step = ide_pm_restore_dma; } - switch (rq->pm->pm_step) { + switch (pm->pm_step) { case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */ if (drive->media != ide_disk) break; @@ -215,7 +218,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * drive->hwif->ide_dma_check(drive); break; } - rq->pm->pm_step = ide_pm_state_completed; + pm->pm_step = ide_pm_state_completed; return ide_stopped; } @@ -362,12 +365,13 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) } } } else if (blk_pm_request(rq)) { + struct request_pm_state *pm = rq->end_io_data; #ifdef DEBUG_PM printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n", drive->name, rq->pm->pm_step, stat, err); #endif ide_complete_power_step(drive, rq, stat, err); - if (rq->pm->pm_step == ide_pm_state_completed) + if (pm->pm_step == ide_pm_state_completed) ide_complete_pm_request(drive, rq); return; } @@ -871,6 +875,39 @@ done: return ide_stopped; } +static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) +{ + struct request_pm_state *pm = rq->end_io_data; + + if (blk_pm_suspend_request(rq) && + pm->pm_step == ide_pm_state_start_suspend) + /* Mark drive blocked when starting the suspend sequence. */ + drive->blocked = 1; + else if (blk_pm_resume_request(rq) && + pm->pm_step == ide_pm_state_start_resume) { + /* + * The first thing we do on wakeup is to wait for BSY bit to + * go away (with a looong timeout) as a drive on this hwif may + * just be POSTing itself. + * We do that before even selecting as the "other" device on + * the bus may be broken enough to walk on our toes at this + * point. + */ + int rc; +#ifdef DEBUG_PM + printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name); +#endif + rc = ide_wait_not_busy(HWIF(drive), 35000); + if (rc) + printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); + SELECT_DRIVE(drive); + HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]); + rc = ide_wait_not_busy(HWIF(drive), 10000); + if (rc) + printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); + } +} + /** * start_request - start of I/O and command issuing for IDE * @@ -909,33 +946,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (block == 0 && drive->remap_0_to_1 == 1) block = 1; /* redirect MBR access to EZ-Drive partn table */ - if (blk_pm_suspend_request(rq) && - rq->pm->pm_step == ide_pm_state_start_suspend) - /* Mark drive blocked when starting the suspend sequence. */ - drive->blocked = 1; - else if (blk_pm_resume_request(rq) && - rq->pm->pm_step == ide_pm_state_start_resume) { - /* - * The first thing we do on wakeup is to wait for BSY bit to - * go away (with a looong timeout) as a drive on this hwif may - * just be POSTing itself. - * We do that before even selecting as the "other" device on - * the bus may be broken enough to walk on our toes at this - * point. - */ - int rc; -#ifdef DEBUG_PM - printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name); -#endif - rc = ide_wait_not_busy(HWIF(drive), 35000); - if (rc) - printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); - SELECT_DRIVE(drive); - HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]); - rc = ide_wait_not_busy(HWIF(drive), 10000); - if (rc) - printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); - } + if (blk_pm_request(rq)) + ide_check_pm_state(drive, rq); SELECT_DRIVE(drive); if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) { @@ -950,13 +962,14 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) else if (rq->flags & REQ_DRIVE_TASKFILE) return execute_drive_cmd(drive, rq); else if (blk_pm_request(rq)) { + struct request_pm_state *pm = rq->end_io_data; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", drive->name, rq->pm->pm_step); #endif startstop = ide_start_power_step(drive, rq); if (startstop == ide_stopped && - rq->pm->pm_step == ide_pm_state_completed) + pm->pm_step == ide_pm_state_completed) ide_complete_pm_request(drive, rq); return startstop; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 9799aed772..59fe358048 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1226,7 +1226,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t state) memset(&args, 0, sizeof(args)); rq.flags = REQ_PM_SUSPEND; rq.special = &args; - rq.pm = &rqpm; + rq.end_io_data = &rqpm; rqpm.pm_step = ide_pm_state_start_suspend; rqpm.pm_state = state.event; @@ -1245,7 +1245,7 @@ static int generic_ide_resume(struct device *dev) memset(&args, 0, sizeof(args)); rq.flags = REQ_PM_RESUME; rq.special = &args; - rq.pm = &rqpm; + rq.end_io_data = &rqpm; rqpm.pm_step = ide_pm_state_start_resume; rqpm.pm_state = PM_EVENT_ON; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 482a21d676..371c0ce5f6 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -195,11 +195,6 @@ struct request { unsigned int timeout; int retries; - /* - * For Power Management requests - */ - struct request_pm_state *pm; - /* * completion callback. end_io_data should be folded in with waiting */ -- 2.39.5