From 9ebed3e60f9991e980e6c38b0edbdf9c8ff2ff6d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 18 Mar 2008 19:34:03 +0300 Subject: [PATCH] [MTD] [NAND] fsl_elbc_nand: fix mtd name Currently fsl_elbc_nand doesn't initialize mtd->name, and this causes nand_get_flash_type() to assign name that is equal to chip type, like this: root@b1:~# cat /proc/mtd dev: size erasesize name mtd0: 00800000 00010000 "fe000000.flash" mtd1: 02000000 00004000 "NAND 32MiB 3,3V 8-bit" mtd0 is physmap_of flash (normal name), and mtd1 is fsl_elbc_nand. Despite inconsistency, with mtd name like this specifying paritions from the kernel command line becomes a torture (though, I didn't tried and not sure if mtdparts= can handle spaces at all). Plus, this causes real bugs when multiple fsl_elbc_nand chips registered. With this patch applied fsl_elbc_nand chip will have proper name: root@b1:~# cat /proc/mtd dev: size erasesize name mtd0: 00800000 00010000 "fe000000.flash" mtd1: 02000000 00004000 "e0600000.flash" p.s. We can't use priv->dev->bus_id as in physmap_of, because fsl_elbc_nand pretends to be a localbus controller, so its bus_id is "address.localbus", which is incorrect and thus will also not work for multiple chips. Signed-off-by: Anton Vorontsov Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsl_elbc_nand.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index b9f9f22cd8..cb12b67ce5 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -780,6 +780,8 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv) nand_release(&priv->mtd); + kfree(priv->mtd.name); + if (priv->vbase) iounmap(priv->vbase); @@ -840,6 +842,12 @@ static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl, goto err; } + priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start); + if (!priv->mtd.name) { + ret = -ENOMEM; + goto err; + } + ret = fsl_elbc_chip_init(priv); if (ret) goto err; -- 2.39.5