From 9ba27794197a18168b99ccecfb7b799f18b64426 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2005 15:16:20 -0700 Subject: [PATCH] [TG3] Fix link failure in 5701 On some 5701 devices with older bootcode, the LED configuration bits in SRAM may be invalid with value zero. The fix is to check for invalid bits (0) and default to PHY 1 mode. Incorrect LED mode will lead to error in programming the PHY. Thanks to Grant Grundler for debugging the problem. >From Grant: | In May, 2004, tg3 v3.4 changed how MAC_LED_CTRL (0x40c) was getting | programmed and how to determine what to program into LED_CTRL. The new | code trusted NIC_SRAM_DATA_CFG (0x00000b58) to indicate what to write | to LED_CTRL and MII EXT_CTRL registers. On "IOX Core Lan", SRAM was | saying MODE_MAC (0x0) and that doesn't work. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index d205013393..6315564d2d 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8560,6 +8560,16 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) case NIC_SRAM_DATA_CFG_LED_MODE_MAC: tp->led_ctrl = LED_CTRL_MODE_MAC; + + /* Default to PHY_1_MODE if 0 (MAC_MODE) is + * read on some older 5700/5701 bootcode. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5700 || + GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5701) + tp->led_ctrl = LED_CTRL_MODE_PHY_1; + break; case SHASTA_EXT_LED_SHARED: -- 2.39.5