From 99c3adb4d5a2d0727d656f32d5de885581d3feec Mon Sep 17 00:00:00 2001 From: Ben Gardner Date: Wed, 18 Jan 2006 22:41:50 +0100 Subject: [PATCH] [PATCH] i2c: scx200_acb whitespace and comment cleanup scx200_acb: Whitespace and comment cleanup Signed-off-by: Ben Gardner Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/scx200_acb.c | 90 ++++++++++++++++----------------- 1 file changed, 43 insertions(+), 47 deletions(-) diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index d3478e0845..f45779b769 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -1,27 +1,25 @@ -/* linux/drivers/i2c/scx200_acb.c - +/* Copyright (c) 2001,2002 Christer Weinigel National Semiconductor SCx200 ACCESS.bus support - + Based on i2c-keywest.c which is: Copyright (c) 2001 Benjamin Herrenschmidt Copyright (c) 2000 Philip Edelbrock - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - + This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ #include @@ -79,8 +77,7 @@ static const char *scx200_acb_state_name[] = { }; /* Physical interface */ -struct scx200_acb_iface -{ +struct scx200_acb_iface { struct scx200_acb_iface *next; struct i2c_adapter adapter; unsigned base; @@ -100,7 +97,7 @@ struct scx200_acb_iface #define ACBSDA (iface->base + 0) #define ACBST (iface->base + 1) #define ACBST_SDAST 0x40 /* SDA Status */ -#define ACBST_BER 0x20 +#define ACBST_BER 0x20 #define ACBST_NEGACK 0x10 /* Negative Acknowledge */ #define ACBST_STASTR 0x08 /* Stall After Start */ #define ACBST_MASTER 0x02 @@ -109,9 +106,9 @@ struct scx200_acb_iface #define ACBCTL1 (iface->base + 3) #define ACBCTL1_STASTRE 0x80 #define ACBCTL1_NMINTE 0x40 -#define ACBCTL1_ACK 0x10 -#define ACBCTL1_STOP 0x02 -#define ACBCTL1_START 0x01 +#define ACBCTL1_ACK 0x10 +#define ACBCTL1_STOP 0x02 +#define ACBCTL1_START 0x01 #define ACBADDR (iface->base + 4) #define ACBCTL2 (iface->base + 5) #define ACBCTL2_ENABLE 0x01 @@ -122,7 +119,7 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) { const char *errmsg; - DBG("state %s, status = 0x%02x\n", + DBG("state %s, status = 0x%02x\n", scx200_acb_state_name[iface->state], status); if (status & ACBST_BER) { @@ -160,10 +157,10 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) case state_repeat_start: outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1); /* fallthrough */ - + case state_quick: if (iface->address_byte & 1) { - if (iface->len == 1) + if (iface->len == 1) outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1); else outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1); @@ -202,17 +199,17 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); break; } - + outb(*iface->ptr++, ACBSDA); --iface->len; - + break; } return; negack: - DBG("negative acknowledge in state %s\n", + DBG("negative acknowledge in state %s\n", scx200_acb_state_name[iface->state]); iface->state = state_idle; @@ -231,7 +228,7 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) iface->needs_reset = 1; } -static void scx200_acb_timeout(struct scx200_acb_iface *iface) +static void scx200_acb_timeout(struct scx200_acb_iface *iface) { dev_err(&iface->adapter.dev, "timeout in state %s\n", scx200_acb_state_name[iface->state]); @@ -264,7 +261,7 @@ static void scx200_acb_poll(struct scx200_acb_iface *iface) static void scx200_acb_reset(struct scx200_acb_iface *iface) { /* Disable the ACCESS.bus device and Configure the SCL - frequency: 16 clock cycles */ + frequency: 16 clock cycles */ outb(0x70, ACBCTL2); /* Polling mode */ outb(0, ACBCTL1); @@ -283,9 +280,9 @@ static void scx200_acb_reset(struct scx200_acb_iface *iface) } static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, - u16 address, unsigned short flags, - char rw, u8 command, int size, - union i2c_smbus_data *data) + u16 address, unsigned short flags, + char rw, u8 command, int size, + union i2c_smbus_data *data) { struct scx200_acb_iface *iface = i2c_get_adapdata(adapter); int len; @@ -295,9 +292,10 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, switch (size) { case I2C_SMBUS_QUICK: - len = 0; - buffer = NULL; - break; + len = 0; + buffer = NULL; + break; + case I2C_SMBUS_BYTE: if (rw == I2C_SMBUS_READ) { len = 1; @@ -306,22 +304,26 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, len = 1; buffer = &command; } - break; + break; + case I2C_SMBUS_BYTE_DATA: - len = 1; - buffer = &data->byte; - break; + len = 1; + buffer = &data->byte; + break; + case I2C_SMBUS_WORD_DATA: len = 2; - cur_word = cpu_to_le16(data->word); - buffer = (u8 *)&cur_word; + cur_word = cpu_to_le16(data->word); + buffer = (u8 *)&cur_word; break; + case I2C_SMBUS_BLOCK_DATA: - len = data->block[0]; - buffer = &data->block[1]; + len = data->block[0]; + buffer = &data->block[1]; break; + default: - return -EINVAL; + return -EINVAL; } DBG("size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n", @@ -370,7 +372,7 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, up(&iface->sem); if (rc == 0 && size == I2C_SMBUS_WORD_DATA && rw == I2C_SMBUS_READ) - data->word = le16_to_cpu(cur_word); + data->word = le16_to_cpu(cur_word); #ifdef DEBUG DBG(": transfer done, result: %d", rc); @@ -406,7 +408,7 @@ static int scx200_acb_probe(struct scx200_acb_iface *iface) u8 val; /* Disable the ACCESS.bus device and Configure the SCL - frequency: 16 clock cycles */ + frequency: 16 clock cycles */ outb(0x70, ACBCTL2); if (inb(ACBCTL2) != 0x70) { @@ -459,7 +461,8 @@ static int __init scx200_acb_create(int base, int index) init_MUTEX(&iface->sem); - snprintf(description, sizeof(description), "NatSemi SCx200 ACCESS.bus [%s]", adapter->name); + snprintf(description, sizeof(description), + "NatSemi SCx200 ACCESS.bus [%s]", adapter->name); if (request_region(base, 8, description) == 0) { dev_err(&adapter->dev, "can't allocate io 0x%x-0x%x\n", base, base + 8-1); @@ -528,6 +531,7 @@ static int __init scx200_acb_init(void) static void __exit scx200_acb_cleanup(void) { struct scx200_acb_iface *iface; + lock_kernel(); while ((iface = scx200_acb_list) != NULL) { scx200_acb_list = iface->next; @@ -543,11 +547,3 @@ static void __exit scx200_acb_cleanup(void) module_init(scx200_acb_init); module_exit(scx200_acb_cleanup); - -/* - Local variables: - compile-command: "make -k -C ../.. SUBDIRS=drivers/i2c modules" - c-basic-offset: 8 - End: -*/ - -- 2.39.5