From 9724b86f0706ca9b552d82e013cb0c208b4f5529 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:24 +0100 Subject: [PATCH] [POWERPC] Small cleanup of EFIKA platform The efika platform used three files efika-pci.c efika-setup.c and a 2 line efika.h to link the two. The total of code in those is really not much and therefore, I think they're better merged in a single file. There is absolutely _no_code_change_ at all, just merged the files. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/Makefile | 2 +- arch/powerpc/platforms/52xx/efika-pci.c | 119 ----------- arch/powerpc/platforms/52xx/efika-setup.c | 121 ----------- arch/powerpc/platforms/52xx/efika.c | 243 ++++++++++++++++++++++ arch/powerpc/platforms/52xx/efika.h | 19 -- 5 files changed, 244 insertions(+), 260 deletions(-) delete mode 100644 arch/powerpc/platforms/52xx/efika-pci.c delete mode 100644 arch/powerpc/platforms/52xx/efika-setup.c create mode 100644 arch/powerpc/platforms/52xx/efika.c delete mode 100644 arch/powerpc/platforms/52xx/efika.h diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index 795b713ec9..07cdbcacf1 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -6,5 +6,5 @@ obj-y += mpc52xx_pic.o mpc52xx_common.o obj-$(CONFIG_PCI) += mpc52xx_pci.o endif -obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o +obj-$(CONFIG_PPC_EFIKA) += efika.o obj-$(CONFIG_PPC_LITE5200) += lite5200.o diff --git a/arch/powerpc/platforms/52xx/efika-pci.c b/arch/powerpc/platforms/52xx/efika-pci.c deleted file mode 100644 index 62e05b2a92..0000000000 --- a/arch/powerpc/platforms/52xx/efika-pci.c +++ /dev/null @@ -1,119 +0,0 @@ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -#ifdef CONFIG_PCI -/* - * Access functions for PCI config space using RTAS calls. - */ -static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 * val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int ret = -1; - int rval; - - rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); - *val = ret; - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int rval; - - rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, - addr, len, val); - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config -}; - -void __init efika_pcisetup(void) -{ - const int *bus_range; - int len; - struct pci_controller *hose; - struct device_node *root; - struct device_node *pcictrl; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the root node\n"); - return; - } - - for (pcictrl = NULL;;) { - pcictrl = of_get_next_child(root, pcictrl); - if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) - break; - } - - of_node_put(root); - - if (pcictrl == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the PCI bridge node\n"); - return; - } - - bus_range = get_property(pcictrl, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't get bus-range for %s\n", pcictrl->full_name); - return; - } - - if (bus_range[1] == bus_range[0]) - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", - bus_range[0]); - else - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", - bus_range[0], bus_range[1]); - printk(" controlled by %s\n", pcictrl->full_name); - printk("\n"); - - hose = pcibios_alloc_controller(); - if (!hose) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't allocate PCI controller structure for %s\n", - pcictrl->full_name); - return; - } - - hose->arch_data = of_node_get(pcictrl); - hose->first_busno = bus_range[0]; - hose->last_busno = bus_range[1]; - hose->ops = &rtas_pci_ops; - - pci_process_bridge_OF_ranges(hose, pcictrl, 0); -} - -#else -void __init efika_pcisetup(void) -{} -#endif diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c deleted file mode 100644 index b6945cbbfb..0000000000 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * - * Efika 5K2 platform setup - * Some code really inspired from the lite5200b platform. - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -static void efika_show_cpuinfo(struct seq_file *m) -{ - struct device_node *root; - const char *revision = NULL; - const char *codegendescription = NULL; - const char *codegenvendor = NULL; - - root = of_find_node_by_path("/"); - if (!root) - return; - - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); - - if (codegendescription) - seq_printf(m, "machine\t\t: %s\n", codegendescription); - else - seq_printf(m, "machine\t\t: Efika\n"); - - if (revision) - seq_printf(m, "revision\t: %s\n", revision); - - if (codegenvendor) - seq_printf(m, "vendor\t\t: %s\n", codegenvendor); - - of_node_put(root); -} - -static void __init efika_setup_arch(void) -{ - rtas_initialize(); - -#ifdef CONFIG_BLK_DEV_INITRD - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - efika_pcisetup(); - - if (ppc_md.progress) - ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); -} - -static int __init efika_probe(void) -{ - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - - if (model == NULL) - return 0; - if (strcmp(model, "EFIKA5K2")) - return 0; - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - return 1; -} - -define_machine(efika) -{ - .name = EFIKA_PLATFORM_NAME, - .probe = efika_probe, - .setup_arch = efika_setup_arch, - .init = mpc52xx_declare_of_platform_devices, - .show_cpuinfo = efika_show_cpuinfo, - .init_IRQ = mpc52xx_init_irq, - .get_irq = mpc52xx_get_irq, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, - .set_rtc_time = rtas_set_rtc_time, - .get_rtc_time = rtas_get_rtc_time, - .progress = rtas_progress, - .get_boot_time = rtas_get_boot_time, - .calibrate_decr = generic_calibrate_decr, - .phys_mem_access_prot = pci_phys_mem_access_prot, -}; diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c new file mode 100644 index 0000000000..8de0341166 --- /dev/null +++ b/arch/powerpc/platforms/52xx/efika.c @@ -0,0 +1,243 @@ +/* + * Efika 5K2 platform code + * Some code really inspired from the lite5200b platform. + * + * Copyright (C) 2006 bplan GmbH + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define EFIKA_PLATFORM_NAME "Efika" + + +/* ------------------------------------------------------------------------ */ +/* PCI accesses thru RTAS */ +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_PCI + +/* + * Access functions for PCI config space using RTAS calls. + */ +static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = { + rtas_read_config, + rtas_write_config +}; + + +void __init efika_pcisetup(void) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + struct device_node *root; + struct device_node *pcictrl; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the root node\n"); + return; + } + + for (pcictrl = NULL;;) { + pcictrl = of_get_next_child(root, pcictrl); + if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) + break; + } + + of_node_put(root); + + if (pcictrl == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the PCI bridge node\n"); + return; + } + + bus_range = get_property(pcictrl, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't get bus-range for %s\n", pcictrl->full_name); + return; + } + + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", + bus_range[0]); + else + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s\n", pcictrl->full_name); + printk("\n"); + + hose = pcibios_alloc_controller(); + if (!hose) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't allocate PCI controller structure for %s\n", + pcictrl->full_name); + return; + } + + hose->arch_data = of_node_get(pcictrl); + hose->first_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + hose->ops = &rtas_pci_ops; + + pci_process_bridge_OF_ranges(hose, pcictrl, 0); +} + +#else +void __init efika_pcisetup(void) +{} +#endif + + + +/* ------------------------------------------------------------------------ */ +/* Platform setup */ +/* ------------------------------------------------------------------------ */ + +static void efika_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *revision = NULL; + const char *codegendescription = NULL; + const char *codegenvendor = NULL; + + root = of_find_node_by_path("/"); + if (!root) + return; + + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + + if (codegendescription) + seq_printf(m, "machine\t\t: %s\n", codegendescription); + else + seq_printf(m, "machine\t\t: Efika\n"); + + if (revision) + seq_printf(m, "revision\t: %s\n", revision); + + if (codegenvendor) + seq_printf(m, "vendor\t\t: %s\n", codegenvendor); + + of_node_put(root); +} + +static void __init efika_setup_arch(void) +{ + rtas_initialize(); + +#ifdef CONFIG_BLK_DEV_INITRD + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + efika_pcisetup(); + + if (ppc_md.progress) + ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); +} + +static int __init efika_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + + if (model == NULL) + return 0; + if (strcmp(model, "EFIKA5K2")) + return 0; + + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + return 1; +} + +define_machine(efika) +{ + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; + diff --git a/arch/powerpc/platforms/52xx/efika.h b/arch/powerpc/platforms/52xx/efika.h deleted file mode 100644 index 2f060fd097..0000000000 --- a/arch/powerpc/platforms/52xx/efika.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Efika 5K2 platform setup - Header file - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#ifndef __ARCH_POWERPC_EFIKA__ -#define __ARCH_POWERPC_EFIKA__ - -#define EFIKA_PLATFORM_NAME "Efika" - -extern void __init efika_pcisetup(void); - -#endif -- 2.39.5