From 964f9ce2ff42dc47cf40fbd2f5c81cd60689e384 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 20 Jul 2007 18:20:36 +0200 Subject: [PATCH] sdhci: make sure to clear the error interrupt The controller has a bit indicating that one of the higher bits (the error bits) are set. A previous bug caused this bit to be masked, but since that bug has been fixed we have to clear it explicictly. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 2 ++ drivers/mmc/host/sdhci.h | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 10d15c39d0..4a24db028d 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1024,6 +1024,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id) intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK); + intmask &= ~SDHCI_INT_ERROR; + if (intmask & SDHCI_INT_BUS_POWER) { printk(KERN_ERR "%s: Card is consuming too much power!\n", mmc_hostname(host->mmc)); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 7400f4bc11..a6c870480b 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -107,6 +107,7 @@ #define SDHCI_INT_CARD_INSERT 0x00000040 #define SDHCI_INT_CARD_REMOVE 0x00000080 #define SDHCI_INT_CARD_INT 0x00000100 +#define SDHCI_INT_ERROR 0x00008000 #define SDHCI_INT_TIMEOUT 0x00010000 #define SDHCI_INT_CRC 0x00020000 #define SDHCI_INT_END_BIT 0x00040000 -- 2.39.5