From 95f48a71a254fa81ae4be1307ce3bb8361521a7d Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 19 Dec 2006 13:08:48 -0800 Subject: [PATCH] remove the broken SKMC driver The SKMC driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 15 - drivers/net/Makefile | 1 - drivers/net/Space.c | 4 - drivers/net/sk_mca.c | 1216 ------------------------------------------ drivers/net/sk_mca.h | 170 ------ 5 files changed, 1406 deletions(-) delete mode 100644 drivers/net/sk_mca.c delete mode 100644 drivers/net/sk_mca.h diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 10ac82f361..b199456a73 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1155,21 +1155,6 @@ config SEEQ8005 . The module will be called seeq8005. -config SKMC - tristate "SKnet MCA support" - depends on NET_ETHERNET && MCA && BROKEN - ---help--- - These are Micro Channel Ethernet adapters. You need to say Y to "MCA - support" in order to use this driver. Supported cards are the SKnet - Junior MC2 and the SKnet MC2(+). The driver automatically - distinguishes between the two cards. Note that using multiple boards - of different type hasn't been tested with this driver. Say Y if you - have one of these Ethernet adapters. - - To compile this driver as a module, choose M here and read - . The module - will be called sk_mca. - config NE2_MCA tristate "NE/2 (ne2000 MCA version) support" depends on NET_ETHERNET && MCA_LEGACY diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 58714d68c8..6c61f3e739 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -137,7 +137,6 @@ obj-$(CONFIG_AT1700) += at1700.o obj-$(CONFIG_EL1) += 3c501.o obj-$(CONFIG_EL16) += 3c507.o obj-$(CONFIG_ELMC) += 3c523.o -obj-$(CONFIG_SKMC) += sk_mca.o obj-$(CONFIG_IBMLANA) += ibmlana.o obj-$(CONFIG_ELMC_II) += 3c527.o obj-$(CONFIG_EL3) += 3c509.o diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 9305eb9b1b..dd8ed456c8 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -59,7 +59,6 @@ extern struct net_device *wavelan_probe(int unit); extern struct net_device *arlan_probe(int unit); extern struct net_device *el16_probe(int unit); extern struct net_device *elmc_probe(int unit); -extern struct net_device *skmca_probe(int unit); extern struct net_device *elplus_probe(int unit); extern struct net_device *ac3200_probe(int unit); extern struct net_device *es_probe(int unit); @@ -152,9 +151,6 @@ static struct devprobe2 mca_probes[] __initdata = { #endif #ifdef CONFIG_ELMC_II /* 3c527 */ {mc32_probe, 0}, -#endif -#ifdef CONFIG_SKMC /* SKnet Microchannel */ - {skmca_probe, 0}, #endif {NULL, 0}, }; diff --git a/drivers/net/sk_mca.c b/drivers/net/sk_mca.c deleted file mode 100644 index 96e06c51b7..0000000000 --- a/drivers/net/sk_mca.c +++ /dev/null @@ -1,1216 +0,0 @@ -/* -net-3-driver for the SKNET MCA-based cards - -This is an extension to the Linux operating system, and is covered by the -same GNU General Public License that covers that work. - -Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de, - alfred.arnold@lancom.de) - -This driver is based both on the 3C523 driver and the SK_G16 driver. - -paper sources: - 'PC Hardware: Aufbau, Funktionsweise, Programmierung' by - Hans-Peter Messmer for the basic Microchannel stuff - - 'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer - for help on Ethernet driver programming - - 'Ethernet/IEEE 802.3 Family 1992 World Network Data Book/Handbook' by AMD - for documentation on the AM7990 LANCE - - 'SKNET Personal Technisches Manual', Version 1.2 by Schneider&Koch - for documentation on the Junior board - - 'SK-NET MC2+ Technical Manual", Version 1.1 by Schneider&Koch for - documentation on the MC2 bord - - A big thank you to the S&K support for providing me so quickly with - documentation! - - Also see http://www.syskonnect.com/ - - Missing things: - - -> set debug level via ioctl instead of compile-time switches - -> I didn't follow the development of the 2.1.x kernels, so my - assumptions about which things changed with which kernel version - are probably nonsense - -History: - May 16th, 1999 - startup - May 22st, 1999 - added private structure, methods - begun building data structures in RAM - May 23nd, 1999 - can receive frames, send frames - May 24th, 1999 - modularized initialization of LANCE - loadable as module - still Tx problem :-( - May 26th, 1999 - MC2 works - support for multiple devices - display media type for MC2+ - May 28th, 1999 - fixed problem in GetLANCE leaving interrupts turned off - increase TX queue to 4 packets to improve send performance - May 29th, 1999 - a few corrections in statistics, caught rcvr overruns - reinitialization of LANCE/board in critical situations - MCA info implemented - implemented LANCE multicast filter - Jun 6th, 1999 - additions for Linux 2.2 - Dec 25th, 1999 - unfortunately there seem to be newer MC2+ boards that react - on IRQ 3/5/9/10 instead of 3/5/10/11, so we have to autoprobe - in questionable cases... - Dec 28th, 1999 - integrated patches from David Weinehall & Bill Wendling for 2.3 - kernels (isa_...functions). Things are defined in a way that - it still works with 2.0.x 8-) - Dec 30th, 1999 - added handling of the remaining interrupt conditions. That - should cure the spurious hangs. - Jan 30th, 2000 - newer kernels automatically probe more than one board, so the - 'startslot' as a variable is also needed here - June 1st, 2000 - added changes for recent 2.3 kernels - - *************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define _SK_MCA_DRIVER_ -#include "sk_mca.h" - -/* ------------------------------------------------------------------------ - * global static data - not more since we can handle multiple boards and - * have to pack all state info into the device struct! - * ------------------------------------------------------------------------ */ - -static char *MediaNames[Media_Count] = - { "10Base2", "10BaseT", "10Base5", "Unknown" }; - -static unsigned char poly[] = - { 1, 1, 1, 0, 1, 1, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0, - 1, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0 -}; - -/* ------------------------------------------------------------------------ - * private subfunctions - * ------------------------------------------------------------------------ */ - -/* dump parts of shared memory - only needed during debugging */ - -#ifdef DEBUG -static void dumpmem(struct net_device *dev, u32 start, u32 len) -{ - skmca_priv *priv = netdev_priv(dev); - int z; - - for (z = 0; z < len; z++) { - if ((z & 15) == 0) - printk("%04x:", z); - printk(" %02x", readb(priv->base + start + z)); - if ((z & 15) == 15) - printk("\n"); - } -} - -/* print exact time - ditto */ - -static void PrTime(void) -{ - struct timeval tv; - - do_gettimeofday(&tv); - printk("%9d:%06d: ", tv.tv_sec, tv.tv_usec); -} -#endif - -/* deduce resources out of POS registers */ - -static void __init getaddrs(int slot, int junior, int *base, int *irq, - skmca_medium * medium) -{ - u_char pos0, pos1, pos2; - - if (junior) { - pos0 = mca_read_stored_pos(slot, 2); - *base = ((pos0 & 0x0e) << 13) + 0xc0000; - *irq = ((pos0 & 0x10) >> 4) + 10; - *medium = Media_Unknown; - } else { - /* reset POS 104 Bits 0+1 so the shared memory region goes to the - configured area between 640K and 1M. Afterwards, enable the MC2. - I really don't know what rode SK to do this... */ - - mca_write_pos(slot, 4, - mca_read_stored_pos(slot, 4) & 0xfc); - mca_write_pos(slot, 2, - mca_read_stored_pos(slot, 2) | 0x01); - - pos1 = mca_read_stored_pos(slot, 3); - pos2 = mca_read_stored_pos(slot, 4); - *base = ((pos1 & 0x07) << 14) + 0xc0000; - switch (pos2 & 0x0c) { - case 0: - *irq = 3; - break; - case 4: - *irq = 5; - break; - case 8: - *irq = -10; - break; - case 12: - *irq = -11; - break; - } - *medium = (pos2 >> 6) & 3; - } -} - -/* check for both cards: - When the MC2 is turned off, it was configured for more than 15MB RAM, - is disabled and won't get detected using the standard probe. We - therefore have to scan the slots manually :-( */ - -static int __init dofind(int *junior, int firstslot) -{ - int slot; - unsigned int id; - - for (slot = firstslot; slot < MCA_MAX_SLOT_NR; slot++) { - id = mca_read_stored_pos(slot, 0) - + (((unsigned int) mca_read_stored_pos(slot, 1)) << 8); - - *junior = 0; - if (id == SKNET_MCA_ID) - return slot; - *junior = 1; - if (id == SKNET_JUNIOR_MCA_ID) - return slot; - } - return MCA_NOTFOUND; -} - -/* reset the whole board */ - -static void ResetBoard(struct net_device *dev) -{ - skmca_priv *priv = netdev_priv(dev); - - writeb(CTRL_RESET_ON, priv->ctrladdr); - udelay(10); - writeb(CTRL_RESET_OFF, priv->ctrladdr); -} - -/* wait for LANCE interface to become not busy */ - -static int WaitLANCE(struct net_device *dev) -{ - skmca_priv *priv = netdev_priv(dev); - int t = 0; - - while ((readb(priv->ctrladdr) & STAT_IO_BUSY) == - STAT_IO_BUSY) { - udelay(1); - if (++t > 1000) { - printk("%s: LANCE access timeout", dev->name); - return 0; - } - } - - return 1; -} - -/* set LANCE register - must be atomic */ - -static void SetLANCE(struct net_device *dev, u16 addr, u16 value) -{ - skmca_priv *priv = netdev_priv(dev); - unsigned long flags; - - /* disable interrupts */ - - spin_lock_irqsave(&priv->lock, flags); - - /* wait until no transfer is pending */ - - WaitLANCE(dev); - - /* transfer register address to RAP */ - - writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_RAP, priv->ctrladdr); - writew(addr, priv->ioregaddr); - writeb(IOCMD_GO, priv->cmdaddr); - udelay(1); - WaitLANCE(dev); - - /* transfer data to register */ - - writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_DATA, priv->ctrladdr); - writew(value, priv->ioregaddr); - writeb(IOCMD_GO, priv->cmdaddr); - udelay(1); - WaitLANCE(dev); - - /* reenable interrupts */ - - spin_unlock_irqrestore(&priv->lock, flags); -} - -/* get LANCE register */ - -static u16 GetLANCE(struct net_device *dev, u16 addr) -{ - skmca_priv *priv = netdev_priv(dev); - unsigned long flags; - unsigned int res; - - /* disable interrupts */ - - spin_lock_irqsave(&priv->lock, flags); - - /* wait until no transfer is pending */ - - WaitLANCE(dev); - - /* transfer register address to RAP */ - - writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_RAP, priv->ctrladdr); - writew(addr, priv->ioregaddr); - writeb(IOCMD_GO, priv->cmdaddr); - udelay(1); - WaitLANCE(dev); - - /* transfer data from register */ - - writeb(CTRL_RESET_OFF | CTRL_RW_READ | CTRL_ADR_DATA, priv->ctrladdr); - writeb(IOCMD_GO, priv->cmdaddr); - udelay(1); - WaitLANCE(dev); - res = readw(priv->ioregaddr); - - /* reenable interrupts */ - - spin_unlock_irqrestore(&priv->lock, flags); - - return res; -} - -/* build up descriptors in shared RAM */ - -static void InitDscrs(struct net_device *dev) -{ - skmca_priv *priv = netdev_priv(dev); - u32 bufaddr; - - /* Set up Tx descriptors. The board has only 16K RAM so bits 16..23 - are always 0. */ - - bufaddr = RAM_DATABASE; - { - LANCE_TxDescr descr; - int z; - - for (z = 0; z < TXCOUNT; z++) { - descr.LowAddr = bufaddr; - descr.Flags = 0; - descr.Len = 0xf000; - descr.Status = 0; - memcpy_toio(priv->base + RAM_TXBASE + - (z * sizeof(LANCE_TxDescr)), &descr, - sizeof(LANCE_TxDescr)); - memset_io(priv->base + bufaddr, 0, RAM_BUFSIZE); - bufaddr += RAM_BUFSIZE; - } - } - - /* do the same for the Rx descriptors */ - - { - LANCE_RxDescr descr; - int z; - - for (z = 0; z < RXCOUNT; z++) { - descr.LowAddr = bufaddr; - descr.Flags = RXDSCR_FLAGS_OWN; - descr.MaxLen = -RAM_BUFSIZE; - descr.Len = 0; - memcpy_toio(priv->base + RAM_RXBASE + - (z * sizeof(LANCE_RxDescr)), &descr, - sizeof(LANCE_RxDescr)); - memset_io(priv->base + bufaddr, 0, RAM_BUFSIZE); - bufaddr += RAM_BUFSIZE; - } - } -} - -/* calculate the hash bit position for a given multicast address - taken more or less directly from the AMD datasheet... */ - -static void UpdateCRC(unsigned char *CRC, int bit) -{ - int j; - - /* shift CRC one bit */ - - memmove(CRC + 1, CRC, 32 * sizeof(unsigned char)); - CRC[0] = 0; - - /* if bit XOR controlbit = 1, set CRC = CRC XOR polynomial */ - - if (bit ^ CRC[32]) - for (j = 0; j < 32; j++) - CRC[j] ^= poly[j]; -} - -static unsigned int GetHash(char *address) -{ - unsigned char CRC[33]; - int i, byte, hashcode; - - /* a multicast address has bit 0 in the first byte set */ - - if ((address[0] & 1) == 0) - return -1; - - /* initialize CRC */ - - memset(CRC, 1, sizeof(CRC)); - - /* loop through address bits */ - - for (byte = 0; byte < 6; byte++) - for (i = 0; i < 8; i++) - UpdateCRC(CRC, (address[byte] >> i) & 1); - - /* hashcode is the 6 least significant bits of the CRC */ - - hashcode = 0; - for (i = 0; i < 6; i++) - hashcode = (hashcode << 1) + CRC[i]; - return hashcode; -} - -/* feed ready-built initialization block into LANCE */ - -static void InitLANCE(struct net_device *dev) -{ - skmca_priv *priv = netdev_priv(dev); - - /* build up descriptors. */ - - InitDscrs(dev); - - /* next RX descriptor to be read is the first one. Since the LANCE - will start from the beginning after initialization, we have to - reset out pointers too. */ - - priv->nextrx = 0; - - /* no TX descriptors active */ - - priv->nexttxput = priv->nexttxdone = priv->txbusy = 0; - - /* set up the LANCE bus control register - constant for SKnet boards */ - - SetLANCE(dev, LANCE_CSR3, - CSR3_BSWAP_OFF | CSR3_ALE_LOW | CSR3_BCON_HOLD); - - /* write address of initialization block into LANCE */ - - SetLANCE(dev, LANCE_CSR1, RAM_INITBASE & 0xffff); - SetLANCE(dev, LANCE_CSR2, (RAM_INITBASE >> 16) & 0xff); - - /* we don't get ready until the LANCE has read the init block */ - - netif_stop_queue(dev); - - /* let LANCE read the initialization block. LANCE is ready - when we receive the corresponding interrupt. */ - - SetLANCE(dev, LANCE_CSR0, CSR0_INEA | CSR0_INIT); -} - -/* stop the LANCE so we can reinitialize it */ - -static void StopLANCE(struct net_device *dev) -{ - /* can't take frames any more */ - - netif_stop_queue(dev); - - /* disable interrupts, stop it */ - - SetLANCE(dev, LANCE_CSR0, CSR0_STOP); -} - -/* initialize card and LANCE for proper operation */ - -static void InitBoard(struct net_device *dev) -{ - skmca_priv *priv = netdev_priv(dev); - LANCE_InitBlock block; - - /* Lay out the shared RAM - first we create the init block for the LANCE. - We do not overwrite it later because we need it again when we switch - promiscous mode on/off. */ - - block.Mode = 0; - if (dev->flags & IFF_PROMISC) - block.Mode |= LANCE_INIT_PROM; - memcpy(block.PAdr, dev->dev_addr, 6); - memset(block.LAdrF, 0, sizeof(block.LAdrF)); - block.RdrP = (RAM_RXBASE & 0xffffff) | (LRXCOUNT << 29); - block.TdrP = (RAM_TXBASE & 0xffffff) | (LTXCOUNT << 29); - - memcpy_toio(priv->base + RAM_INITBASE, &block, sizeof(block)); - - /* initialize LANCE. Implicitly sets up other structures in RAM. */ - - InitLANCE(dev); -} - -/* deinitialize card and LANCE */ - -static void DeinitBoard(struct net_device *dev) -{ - /* stop LANCE */ - - StopLANCE(dev); - - /* reset board */ - - ResetBoard(dev); -} - -/* probe for device's irq */ - -static int __init ProbeIRQ(struct net_device *dev) -{ - unsigned long imaskval, njiffies, irq; - u16 csr0val; - - /* enable all interrupts */ - - imaskval = probe_irq_on(); - - /* initialize the board. Wait for interrupt 'Initialization done'. */ - - ResetBoard(dev); - InitBoard(dev); - - njiffies = jiffies + HZ; - do { - csr0val = GetLANCE(dev, LANCE_CSR0); - } - while (((csr0val & CSR0_IDON) == 0) && (jiffies != njiffies)); - - /* turn of interrupts again */ - - irq = probe_irq_off(imaskval); - - /* if we found something, ack the interrupt */ - - if (irq) - SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_IDON); - - /* back to idle state */ - - DeinitBoard(dev); - - return irq; -} - -/* ------------------------------------------------------------------------ - * interrupt handler(s) - * ------------------------------------------------------------------------ */ - -/* LANCE has read initialization block -> start it */ - -static u16 irqstart_handler(struct net_device *dev, u16 oldcsr0) -{ - /* now we're ready to transmit */ - - netif_wake_queue(dev); - - /* reset IDON bit, start LANCE */ - - SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_IDON | CSR0_STRT); - return GetLANCE(dev, LANCE_CSR0); -} - -/* did we lose blocks due to a FIFO overrun ? */ - -static u16 irqmiss_handler(struct net_device *dev, u16 oldcsr0) -{ - skmca_priv *priv = netdev_priv(dev); - - /* update statistics */ - - priv->stat.rx_fifo_errors++; - - /* reset MISS bit */ - - SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_MISS); - return GetLANCE(dev, LANCE_CSR0); -} - -/* receive interrupt */ - -static u16 irqrx_handler(struct net_device *dev, u16 oldcsr0) -{ - skmca_priv *priv = netdev_priv(dev); - LANCE_RxDescr descr; - unsigned int descraddr; - - /* run through queue until we reach a descriptor we do not own */ - - descraddr = RAM_RXBASE + (priv->nextrx * sizeof(LANCE_RxDescr)); - while (1) { - /* read descriptor */ - memcpy_fromio(&descr, priv->base + descraddr, - sizeof(LANCE_RxDescr)); - - /* if we reach a descriptor we do not own, we're done */ - if ((descr.Flags & RXDSCR_FLAGS_OWN) != 0) - break; - -#ifdef DEBUG - PrTime(); - printk("Receive packet on descr %d len %d\n", priv->nextrx, - descr.Len); -#endif - - /* erroneous packet ? */ - if ((descr.Flags & RXDSCR_FLAGS_ERR) != 0) { - priv->stat.rx_errors++; - if ((descr.Flags & RXDSCR_FLAGS_CRC) != 0) - priv->stat.rx_crc_errors++; - else if ((descr.Flags & RXDSCR_FLAGS_CRC) != 0) - priv->stat.rx_frame_errors++; - else if ((descr.Flags & RXDSCR_FLAGS_OFLO) != 0) - priv->stat.rx_fifo_errors++; - } - - /* good packet ? */ - else { - struct sk_buff *skb; - - skb = dev_alloc_skb(descr.Len + 2); - if (skb == NULL) - priv->stat.rx_dropped++; - else { - memcpy_fromio(skb_put(skb, descr.Len), - priv->base + - descr.LowAddr, descr.Len); - skb->dev = dev; - skb->protocol = eth_type_trans(skb, dev); - skb->ip_summed = CHECKSUM_NONE; - priv->stat.rx_packets++; - priv->stat.rx_bytes += descr.Len; - netif_rx(skb); - dev->last_rx = jiffies; - } - } - - /* give descriptor back to LANCE */ - descr.Len = 0; - descr.Flags |= RXDSCR_FLAGS_OWN; - - /* update descriptor in shared RAM */ - memcpy_toio(priv->base + descraddr, &descr, - sizeof(LANCE_RxDescr)); - - /* go to next descriptor */ - priv->nextrx++; - descraddr += sizeof(LANCE_RxDescr); - if (priv->nextrx >= RXCOUNT) { - priv->nextrx = 0; - descraddr = RAM_RXBASE; - } - } - - /* reset RINT bit */ - - SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_RINT); - return GetLANCE(dev, LANCE_CSR0); -} - -/* transmit interrupt */ - -static u16 irqtx_handler(struct net_device *dev, u16 oldcsr0) -{ - skmca_priv *priv = netdev_priv(dev); - LANCE_TxDescr descr; - unsigned int descraddr; - - /* check descriptors at most until no busy one is left */ - - descraddr = - RAM_TXBASE + (priv->nexttxdone * sizeof(LANCE_TxDescr)); - while (priv->txbusy > 0) { - /* read descriptor */ - memcpy_fromio(&descr, priv->base + descraddr, - sizeof(LANCE_TxDescr)); - - /* if the LANCE still owns this one, we've worked out all sent packets */ - if ((descr.Flags & TXDSCR_FLAGS_OWN) != 0) - break; - -#ifdef DEBUG - PrTime(); - printk("Send packet done on descr %d\n", priv->nexttxdone); -#endif - - /* update statistics */ - if ((descr.Flags & TXDSCR_FLAGS_ERR) == 0) { - priv->stat.tx_packets++; - priv->stat.tx_bytes++; - } else { - priv->stat.tx_errors++; - if ((descr.Status & TXDSCR_STATUS_UFLO) != 0) { - priv->stat.tx_fifo_errors++; - InitLANCE(dev); - } - else - if ((descr.Status & TXDSCR_STATUS_LCOL) != - 0) priv->stat.tx_window_errors++; - else if ((descr.Status & TXDSCR_STATUS_LCAR) != 0) - priv->stat.tx_carrier_errors++; - else if ((descr.Status & TXDSCR_STATUS_RTRY) != 0) - priv->stat.tx_aborted_errors++; - } - - /* go to next descriptor */ - priv->nexttxdone++; - descraddr += sizeof(LANCE_TxDescr); - if (priv->nexttxdone >= TXCOUNT) { - priv->nexttxdone = 0; - descraddr = RAM_TXBASE; - } - priv->txbusy--; - } - - /* reset TX interrupt bit */ - - SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_TINT); - oldcsr0 = GetLANCE(dev, LANCE_CSR0); - - /* at least one descriptor is freed. Therefore we can accept - a new one */ - /* inform upper layers we're in business again */ - - netif_wake_queue(dev); - - return oldcsr0; -} - -/* general interrupt entry */ - -static irqreturn_t irq_handler(int irq, void *device) -{ - struct net_device *dev = (struct net_device *) device; - u16 csr0val; - - /* read CSR0 to get interrupt cause */ - - csr0val = GetLANCE(dev, LANCE_CSR0); - - /* in case we're not meant... */ - - if ((csr0val & CSR0_INTR) == 0) - return IRQ_NONE; - -#if 0 - set_bit(LINK_STATE_RXSEM, &dev->state); -#endif - - /* loop through the interrupt bits until everything is clear */ - - do { - if ((csr0val & CSR0_IDON) != 0) - csr0val = irqstart_handler(dev, csr0val); - if ((csr0val & CSR0_RINT) != 0) - csr0val = irqrx_handler(dev, csr0val); - if ((csr0val & CSR0_MISS) != 0) - csr0val = irqmiss_handler(dev, csr0val); - if ((csr0val & CSR0_TINT) != 0) - csr0val = irqtx_handler(dev, csr0val); - if ((csr0val & CSR0_MERR) != 0) { - SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_MERR); - csr0val = GetLANCE(dev, LANCE_CSR0); - } - if ((csr0val & CSR0_BABL) != 0) { - SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_BABL); - csr0val = GetLANCE(dev, LANCE_CSR0); - } - } - while ((csr0val & CSR0_INTR) != 0); - -#if 0 - clear_bit(LINK_STATE_RXSEM, &dev->state); -#endif - return IRQ_HANDLED; -} - -/* ------------------------------------------------------------------------ - * driver methods - * ------------------------------------------------------------------------ */ - -/* MCA info */ - -static int skmca_getinfo(char *buf, int slot, void *d) -{ - int len = 0, i; - struct net_device *dev = (struct net_device *) d; - skmca_priv *priv; - - /* can't say anything about an uninitialized device... */ - - if (dev == NULL) - return len; - priv = netdev_priv(dev); - - /* print info */ - - len += sprintf(buf + len, "IRQ: %d\n", priv->realirq); - len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, - dev->mem_end - 1); - len += - sprintf(buf + len, "Transceiver: %s\n", - MediaNames[priv->medium]); - len += sprintf(buf + len, "Device: %s\n", dev->name); - len += sprintf(buf + len, "MAC address:"); - for (i = 0; i < 6; i++) - len += sprintf(buf + len, " %02x", dev->dev_addr[i]); - buf[len++] = '\n'; - buf[len] = 0; - - return len; -} - -/* open driver. Means also initialization and start of LANCE */ - -static int skmca_open(struct net_device *dev) -{ - int result; - skmca_priv *priv = netdev_priv(dev); - - /* register resources - only necessary for IRQ */ - result = - request_irq(priv->realirq, irq_handler, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, "sk_mca", dev); - if (result != 0) { - printk("%s: failed to register irq %d\n", dev->name, - dev->irq); - return result; - } - dev->irq = priv->realirq; - - /* set up the card and LANCE */ - - InitBoard(dev); - - /* set up flags */ - - netif_start_queue(dev); - - return 0; -} - -/* close driver. Shut down board and free allocated resources */ - -static int skmca_close(struct net_device *dev) -{ - /* turn off board */ - DeinitBoard(dev); - - /* release resources */ - if (dev->irq != 0) - free_irq(dev->irq, dev); - dev->irq = 0; - - return 0; -} - -/* transmit a block. */ - -static int skmca_tx(struct sk_buff *skb, struct net_device *dev) -{ - skmca_priv *priv = netdev_priv(dev); - LANCE_TxDescr descr; - unsigned int address; - int tmplen, retval = 0; - unsigned long flags; - - /* if we get called with a NULL descriptor, the Ethernet layer thinks - our card is stuck an we should reset it. We'll do this completely: */ - - if (skb == NULL) { - DeinitBoard(dev); - InitBoard(dev); - return 0; /* don't try to free the block here ;-) */ - } - - /* is there space in the Tx queue ? If no, the upper layer gave us a - packet in spite of us not being ready and is really in trouble. - We'll do the dropping for him: */ - if (priv->txbusy >= TXCOUNT) { - priv->stat.tx_dropped++; - retval = -EIO; - goto tx_done; - } - - /* get TX descriptor */ - address = RAM_TXBASE + (priv->nexttxput * sizeof(LANCE_TxDescr)); - memcpy_fromio(&descr, priv->base + address, sizeof(LANCE_TxDescr)); - - /* enter packet length as 2s complement - assure minimum length */ - tmplen = skb->len; - if (tmplen < 60) - tmplen = 60; - descr.Len = 65536 - tmplen; - - /* copy filler into RAM - in case we're filling up... - we're filling a bit more than necessary, but that doesn't harm - since the buffer is far larger... */ - if (tmplen > skb->len) { - char *fill = "NetBSD is a nice OS too! "; - unsigned int destoffs = 0, l = strlen(fill); - - while (destoffs < tmplen) { - memcpy_toio(priv->base + descr.LowAddr + - destoffs, fill, l); - destoffs += l; - } - } - - /* do the real data copying */ - memcpy_toio(priv->base + descr.LowAddr, skb->data, skb->len); - - /* hand descriptor over to LANCE - this is the first and last chunk */ - descr.Flags = - TXDSCR_FLAGS_OWN | TXDSCR_FLAGS_STP | TXDSCR_FLAGS_ENP; - -#ifdef DEBUG - PrTime(); - printk("Send packet on descr %d len %d\n", priv->nexttxput, - skb->len); -#endif - - /* one more descriptor busy */ - - spin_lock_irqsave(&priv->lock, flags); - - priv->nexttxput++; - if (priv->nexttxput >= TXCOUNT) - priv->nexttxput = 0; - priv->txbusy++; - - /* are we saturated ? */ - - if (priv->txbusy >= TXCOUNT) - netif_stop_queue(dev); - - /* write descriptor back to RAM */ - memcpy_toio(priv->base + address, &descr, sizeof(LANCE_TxDescr)); - - /* if no descriptors were active, give the LANCE a hint to read it - immediately */ - - if (priv->txbusy == 0) - SetLANCE(dev, LANCE_CSR0, CSR0_INEA | CSR0_TDMD); - - spin_unlock_irqrestore(&priv->lock, flags); - - tx_done: - - dev_kfree_skb(skb); - - return retval; -} - -/* return pointer to Ethernet statistics */ - -static struct net_device_stats *skmca_stats(struct net_device *dev) -{ - skmca_priv *priv = netdev_priv(dev); - - return &(priv->stat); -} - -/* switch receiver mode. We use the LANCE's multicast filter to prefilter - multicast addresses. */ - -static void skmca_set_multicast_list(struct net_device *dev) -{ - skmca_priv *priv = netdev_priv(dev); - LANCE_InitBlock block; - - /* first stop the LANCE... */ - StopLANCE(dev); - - /* ...then modify the initialization block... */ - memcpy_fromio(&block, priv->base + RAM_INITBASE, sizeof(block)); - if (dev->flags & IFF_PROMISC) - block.Mode |= LANCE_INIT_PROM; - else - block.Mode &= ~LANCE_INIT_PROM; - - if (dev->flags & IFF_ALLMULTI) { /* get all multicasts */ - memset(block.LAdrF, 0xff, sizeof(block.LAdrF)); - } else { /* get selected/no multicasts */ - - struct dev_mc_list *mptr; - int code; - - memset(block.LAdrF, 0, sizeof(block.LAdrF)); - for (mptr = dev->mc_list; mptr != NULL; mptr = mptr->next) { - code = GetHash(mptr->dmi_addr); - block.LAdrF[(code >> 3) & 7] |= 1 << (code & 7); - } - } - - memcpy_toio(priv->base + RAM_INITBASE, &block, sizeof(block)); - - /* ...then reinit LANCE with the correct flags */ - InitLANCE(dev); -} - -/* ------------------------------------------------------------------------ - * hardware check - * ------------------------------------------------------------------------ */ - -static int startslot; /* counts through slots when probing multiple devices */ - -static void cleanup_card(struct net_device *dev) -{ - skmca_priv *priv = netdev_priv(dev); - DeinitBoard(dev); - if (dev->irq != 0) - free_irq(dev->irq, dev); - iounmap(priv->base); - mca_mark_as_unused(priv->slot); - mca_set_adapter_procfn(priv->slot, NULL, NULL); -} - -struct net_device * __init skmca_probe(int unit) -{ - struct net_device *dev; - int force_detect = 0; - int junior, slot, i; - int base = 0, irq = 0; - skmca_priv *priv; - skmca_medium medium; - int err; - - /* can't work without an MCA bus ;-) */ - - if (MCA_bus == 0) - return ERR_PTR(-ENODEV); - - dev = alloc_etherdev(sizeof(skmca_priv)); - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - } - - SET_MODULE_OWNER(dev); - - /* start address of 1 --> forced detection */ - - if (dev->mem_start == 1) - force_detect = 1; - - /* search through slots */ - - base = dev->mem_start; - irq = dev->base_addr; - for (slot = startslot; (slot = dofind(&junior, slot)) != -1; slot++) { - /* deduce card addresses */ - - getaddrs(slot, junior, &base, &irq, &medium); - - /* slot already in use ? */ - - if (mca_is_adapter_used(slot)) - continue; - - /* were we looking for something different ? */ - - if (dev->irq && dev->irq != irq) - continue; - if (dev->mem_start && dev->mem_start != base) - continue; - - /* found something that matches */ - - break; - } - - /* nothing found ? */ - - if (slot == -1) { - free_netdev(dev); - return (base || irq) ? ERR_PTR(-ENXIO) : ERR_PTR(-ENODEV); - } - - /* make procfs entries */ - - if (junior) - mca_set_adapter_name(slot, - "SKNET junior MC2 Ethernet Adapter"); - else - mca_set_adapter_name(slot, "SKNET MC2+ Ethernet Adapter"); - mca_set_adapter_procfn(slot, (MCA_ProcFn) skmca_getinfo, dev); - - mca_mark_as_used(slot); - - /* announce success */ - printk("%s: SKNet %s adapter found in slot %d\n", dev->name, - junior ? "Junior MC2" : "MC2+", slot + 1); - - priv = netdev_priv(dev); - priv->base = ioremap(base, 0x4000); - if (!priv->base) { - mca_set_adapter_procfn(slot, NULL, NULL); - mca_mark_as_unused(slot); - free_netdev(dev); - return ERR_PTR(-ENOMEM); - } - - priv->slot = slot; - priv->macbase = priv->base + 0x3fc0; - priv->ioregaddr = priv->base + 0x3ff0; - priv->ctrladdr = priv->base + 0x3ff2; - priv->cmdaddr = priv->base + 0x3ff3; - priv->medium = medium; - memset(&priv->stat, 0, sizeof(struct net_device_stats)); - spin_lock_init(&priv->lock); - - /* set base + irq for this device (irq not allocated so far) */ - dev->irq = 0; - dev->mem_start = base; - dev->mem_end = base + 0x4000; - - /* autoprobe ? */ - if (irq < 0) { - int nirq; - - printk - ("%s: ambigous POS bit combination, must probe for IRQ...\n", - dev->name); - nirq = ProbeIRQ(dev); - if (nirq <= 0) - printk("%s: IRQ probe failed, assuming IRQ %d", - dev->name, priv->realirq = -irq); - else - priv->realirq = nirq; - } else - priv->realirq = irq; - - /* set methods */ - dev->open = skmca_open; - dev->stop = skmca_close; - dev->hard_start_xmit = skmca_tx; - dev->do_ioctl = NULL; - dev->get_stats = skmca_stats; - dev->set_multicast_list = skmca_set_multicast_list; - dev->flags |= IFF_MULTICAST; - - /* copy out MAC address */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = readb(priv->macbase + (i << 1)); - - /* print config */ - printk("%s: IRQ %d, memory %#lx-%#lx, " - "MAC address %02x:%02x:%02x:%02x:%02x:%02x.\n", - dev->name, priv->realirq, dev->mem_start, dev->mem_end - 1, - dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], - dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); - printk("%s: %s medium\n", dev->name, MediaNames[priv->medium]); - - /* reset board */ - - ResetBoard(dev); - - startslot = slot + 1; - - err = register_netdev(dev); - if (err) { - cleanup_card(dev); - free_netdev(dev); - dev = ERR_PTR(err); - } - return dev; -} - -/* ------------------------------------------------------------------------ - * modularization support - * ------------------------------------------------------------------------ */ - -#ifdef MODULE -MODULE_LICENSE("GPL"); - -#define DEVMAX 5 - -static struct net_device *moddevs[DEVMAX]; - -int init_module(void) -{ - int z; - - startslot = 0; - for (z = 0; z < DEVMAX; z++) { - struct net_device *dev = skmca_probe(-1); - if (IS_ERR(dev)) - break; - moddevs[z] = dev; - } - if (!z) - return -EIO; - return 0; -} - -void cleanup_module(void) -{ - int z; - - for (z = 0; z < DEVMAX; z++) { - struct net_device *dev = moddevs[z]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/sk_mca.h b/drivers/net/sk_mca.h deleted file mode 100644 index 0dae056fed..0000000000 --- a/drivers/net/sk_mca.h +++ /dev/null @@ -1,170 +0,0 @@ -#ifndef _SK_MCA_INCLUDE_ -#define _SK_MCA_INCLUDE_ - -#ifdef _SK_MCA_DRIVER_ - -/* Adapter ID's */ -#define SKNET_MCA_ID 0x6afd -#define SKNET_JUNIOR_MCA_ID 0x6be9 - -/* media enumeration - defined in a way that it fits onto the MC2+'s - POS registers... */ - -typedef enum { Media_10Base2, Media_10BaseT, - Media_10Base5, Media_Unknown, Media_Count -} skmca_medium; - -/* private structure */ -typedef struct { - unsigned int slot; /* MCA-Slot-# */ - void __iomem *base; - void __iomem *macbase; /* base address of MAC address PROM */ - void __iomem *ioregaddr;/* address of I/O-register (Lo) */ - void __iomem *ctrladdr; /* address of control/stat register */ - void __iomem *cmdaddr; /* address of I/O-command register */ - int nextrx; /* index of next RX descriptor to - be read */ - int nexttxput; /* index of next free TX descriptor */ - int nexttxdone; /* index of next TX descriptor to - be finished */ - int txbusy; /* # of busy TX descriptors */ - struct net_device_stats stat; /* packet statistics */ - int realirq; /* memorizes actual IRQ, even when - currently not allocated */ - skmca_medium medium; /* physical cannector */ - spinlock_t lock; -} skmca_priv; - -/* card registers: control/status register bits */ - -#define CTRL_ADR_DATA 0 /* Bit 0 = 0 ->access data register */ -#define CTRL_ADR_RAP 1 /* Bit 0 = 1 ->access RAP register */ -#define CTRL_RW_WRITE 0 /* Bit 1 = 0 ->write register */ -#define CTRL_RW_READ 2 /* Bit 1 = 1 ->read register */ -#define CTRL_RESET_ON 0 /* Bit 3 = 0 ->reset board */ -#define CTRL_RESET_OFF 8 /* Bit 3 = 1 ->no reset of board */ - -#define STAT_ADR_DATA 0 /* Bit 0 of ctrl register read back */ -#define STAT_ADR_RAP 1 -#define STAT_RW_WRITE 0 /* Bit 1 of ctrl register read back */ -#define STAT_RW_READ 2 -#define STAT_RESET_ON 0 /* Bit 3 of ctrl register read back */ -#define STAT_RESET_OFF 8 -#define STAT_IRQ_ACT 0 /* interrupt pending */ -#define STAT_IRQ_NOACT 16 /* no interrupt pending */ -#define STAT_IO_NOBUSY 0 /* no transfer busy */ -#define STAT_IO_BUSY 32 /* transfer busy */ - -/* I/O command register bits */ - -#define IOCMD_GO 128 /* Bit 7 = 1 -> start register xfer */ - -/* LANCE registers */ - -#define LANCE_CSR0 0 /* Status/Control */ - -#define CSR0_ERR 0x8000 /* general error flag */ -#define CSR0_BABL 0x4000 /* transmitter timeout */ -#define CSR0_CERR 0x2000 /* collision error */ -#define CSR0_MISS 0x1000 /* lost Rx block */ -#define CSR0_MERR 0x0800 /* memory access error */ -#define CSR0_RINT 0x0400 /* receiver interrupt */ -#define CSR0_TINT 0x0200 /* transmitter interrupt */ -#define CSR0_IDON 0x0100 /* initialization done */ -#define CSR0_INTR 0x0080 /* general interrupt flag */ -#define CSR0_INEA 0x0040 /* interrupt enable */ -#define CSR0_RXON 0x0020 /* receiver enabled */ -#define CSR0_TXON 0x0010 /* transmitter enabled */ -#define CSR0_TDMD 0x0008 /* force transmission now */ -#define CSR0_STOP 0x0004 /* stop LANCE */ -#define CSR0_STRT 0x0002 /* start LANCE */ -#define CSR0_INIT 0x0001 /* read initialization block */ - -#define LANCE_CSR1 1 /* addr bit 0..15 of initialization */ -#define LANCE_CSR2 2 /* 16..23 block */ - -#define LANCE_CSR3 3 /* Bus control */ -#define CSR3_BCON_HOLD 0 /* Bit 0 = 0 -> BM1,BM0,HOLD */ -#define CSR3_BCON_BUSRQ 1 /* Bit 0 = 1 -> BUSAK0,BYTE,BUSRQ */ -#define CSR3_ALE_HIGH 0 /* Bit 1 = 0 -> ALE asserted high */ -#define CSR3_ALE_LOW 2 /* Bit 1 = 1 -> ALE asserted low */ -#define CSR3_BSWAP_OFF 0 /* Bit 2 = 0 -> no byte swap */ -#define CSR3_BSWAP_ON 4 /* Bit 2 = 1 -> byte swap */ - -/* LANCE structures */ - -typedef struct { /* LANCE initialization block */ - u16 Mode; /* mode flags */ - u8 PAdr[6]; /* MAC address */ - u8 LAdrF[8]; /* Multicast filter */ - u32 RdrP; /* Receive descriptor */ - u32 TdrP; /* Transmit descriptor */ -} LANCE_InitBlock; - -/* Mode flags init block */ - -#define LANCE_INIT_PROM 0x8000 /* enable promiscous mode */ -#define LANCE_INIT_INTL 0x0040 /* internal loopback */ -#define LANCE_INIT_DRTY 0x0020 /* disable retry */ -#define LANCE_INIT_COLL 0x0010 /* force collision */ -#define LANCE_INIT_DTCR 0x0008 /* disable transmit CRC */ -#define LANCE_INIT_LOOP 0x0004 /* loopback */ -#define LANCE_INIT_DTX 0x0002 /* disable transmitter */ -#define LANCE_INIT_DRX 0x0001 /* disable receiver */ - -typedef struct { /* LANCE Tx descriptor */ - u16 LowAddr; /* bit 0..15 of address */ - u16 Flags; /* bit 16..23 of address + Flags */ - u16 Len; /* 2s complement of packet length */ - u16 Status; /* Result of transmission */ -} LANCE_TxDescr; - -#define TXDSCR_FLAGS_OWN 0x8000 /* LANCE owns descriptor */ -#define TXDSCR_FLAGS_ERR 0x4000 /* summary error flag */ -#define TXDSCR_FLAGS_MORE 0x1000 /* more than one retry needed? */ -#define TXDSCR_FLAGS_ONE 0x0800 /* one retry? */ -#define TXDSCR_FLAGS_DEF 0x0400 /* transmission deferred? */ -#define TXDSCR_FLAGS_STP 0x0200 /* first packet in chain? */ -#define TXDSCR_FLAGS_ENP 0x0100 /* last packet in chain? */ - -#define TXDSCR_STATUS_BUFF 0x8000 /* buffer error? */ -#define TXDSCR_STATUS_UFLO 0x4000 /* silo underflow during transmit? */ -#define TXDSCR_STATUS_LCOL 0x1000 /* late collision? */ -#define TXDSCR_STATUS_LCAR 0x0800 /* loss of carrier? */ -#define TXDSCR_STATUS_RTRY 0x0400 /* retry error? */ - -typedef struct { /* LANCE Rx descriptor */ - u16 LowAddr; /* bit 0..15 of address */ - u16 Flags; /* bit 16..23 of address + Flags */ - u16 MaxLen; /* 2s complement of buffer length */ - u16 Len; /* packet length */ -} LANCE_RxDescr; - -#define RXDSCR_FLAGS_OWN 0x8000 /* LANCE owns descriptor */ -#define RXDSCR_FLAGS_ERR 0x4000 /* summary error flag */ -#define RXDSCR_FLAGS_FRAM 0x2000 /* framing error flag */ -#define RXDSCR_FLAGS_OFLO 0x1000 /* FIFO overflow? */ -#define RXDSCR_FLAGS_CRC 0x0800 /* CRC error? */ -#define RXDSCR_FLAGS_BUFF 0x0400 /* buffer error? */ -#define RXDSCR_FLAGS_STP 0x0200 /* first packet in chain? */ -#define RXDCSR_FLAGS_ENP 0x0100 /* last packet in chain? */ - -/* RAM layout */ - -#define TXCOUNT 4 /* length of TX descriptor queue */ -#define LTXCOUNT 2 /* log2 of it */ -#define RXCOUNT 4 /* length of RX descriptor queue */ -#define LRXCOUNT 2 /* log2 of it */ - -#define RAM_INITBASE 0 /* LANCE init block */ -#define RAM_TXBASE 24 /* Start of TX descriptor queue */ -#define RAM_RXBASE \ -(RAM_TXBASE + (TXCOUNT * 8)) /* Start of RX descriptor queue */ -#define RAM_DATABASE \ -(RAM_RXBASE + (RXCOUNT * 8)) /* Start of data area for frames */ -#define RAM_BUFSIZE 1580 /* max. frame size - should never be - reached */ - -#endif /* _SK_MCA_DRIVER_ */ - -#endif /* _SK_MCA_INCLUDE_ */ -- 2.39.5