From 95c9f16284960f579205d7da8b5d90e2f3bf44a7 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 9 Sep 2007 08:56:39 -0600 Subject: [PATCH] [SCSI] advansys: Comment/indentation/macro cleanup - Delete comments relating to the previous structure of the driver. I have no intention of honouring them ;-) - Reformat comments > 80 columns - Remove now-obsolete comments from advansys_interrupt - Change adv_get_sglist() from do {} while (1) to for (;;) - Return void from AscInitQLinkVar() - Take out a level of indentation in adv_get_sglist() - Reduce indentation level of AscAsyncFix() - Remove unused macros - Refactor AscSendScsiQueue slightly Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/advansys.c | 379 +++++++++++----------------------------- 1 file changed, 101 insertions(+), 278 deletions(-) diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 9c5d37d9c7..e5b26a1ea0 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -76,10 +76,6 @@ /* Enable driver tracing. */ /* #define ADVANSYS_DEBUG */ -/* - * --- Asc Library Constants and Macros - */ - #define ASC_LIB_VERSION_MAJOR 1 #define ASC_LIB_VERSION_MINOR 24 #define ASC_LIB_SERIAL_NUMBER 123 @@ -118,15 +114,10 @@ typedef unsigned char uchar; #define FALSE (0) #endif -#define EOF (-1) #define ERR (-1) #define UW_ERR (uint)(0xFFFF) #define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0) -#define ASC_DVCLIB_CALL_DONE (1) -#define ASC_DVCLIB_CALL_FAILED (0) -#define ASC_DVCLIB_CALL_ERROR (-1) - #define PCI_VENDOR_ID_ASP 0x10cd #define PCI_DEVICE_ID_ASP_1200A 0x1100 #define PCI_DEVICE_ID_ASP_ABP940 0x1200 @@ -164,11 +155,10 @@ typedef unsigned char uchar; #define ASC_IS_PCMCIA (0x0008) #define ASC_IS_MCA (0x0020) #define ASC_IS_VL (0x0040) -#define ASC_ISA_PNP_PORT_ADDR (0x279) -#define ASC_ISA_PNP_PORT_WRITE (ASC_ISA_PNP_PORT_ADDR+0x800) #define ASC_IS_WIDESCSI_16 (0x0100) #define ASC_IS_WIDESCSI_32 (0x0200) #define ASC_IS_BIG_ENDIAN (0x8000) + #define ASC_CHIP_MIN_VER_VL (0x01) #define ASC_CHIP_MAX_VER_VL (0x07) #define ASC_CHIP_MIN_VER_PCI (0x09) @@ -187,16 +177,9 @@ typedef unsigned char uchar; #define ASC_CHIP_MAX_VER_EISA (0x47) #define ASC_CHIP_VER_EISA_BIT (0x40) #define ASC_CHIP_LATEST_VER_EISA ((ASC_CHIP_MIN_VER_EISA - 1) + 3) -#define ASC_MAX_LIB_SUPPORTED_ISA_CHIP_VER 0x21 -#define ASC_MAX_LIB_SUPPORTED_PCI_CHIP_VER 0x0A -#define ASC_MAX_VL_DMA_ADDR (0x07FFFFFFL) #define ASC_MAX_VL_DMA_COUNT (0x07FFFFFFL) -#define ASC_MAX_PCI_DMA_ADDR (0xFFFFFFFFL) #define ASC_MAX_PCI_DMA_COUNT (0xFFFFFFFFL) -#define ASC_MAX_ISA_DMA_ADDR (0x00FFFFFFL) #define ASC_MAX_ISA_DMA_COUNT (0x00FFFFFFL) -#define ASC_MAX_EISA_DMA_ADDR (0x07FFFFFFL) -#define ASC_MAX_EISA_DMA_COUNT (0x07FFFFFFL) #define ASC_SCSI_ID_BITS 3 #define ASC_SCSI_TIX_TYPE uchar @@ -216,24 +199,6 @@ typedef unsigned char uchar; #define ASC_MAX_CDB_LEN 12 #define ADV_MAX_CDB_LEN 16 -/* - * Inquiry SPC-2 SPI Byte 1 EVPD (Enable Vital Product Data) - * and CmdDt (Command Support Data) field bit definitions. - */ -#define ADV_INQ_RTN_VPD_AND_CMDDT 0x3 -#define ADV_INQ_RTN_CMDDT_FOR_OP_CODE 0x2 -#define ADV_INQ_RTN_VPD_FOR_PG_CODE 0x1 -#define ADV_INQ_RTN_STD_INQUIRY_DATA 0x0 - -#define ASC_SCSIDIR_NOCHK 0x00 -#define ASC_SCSIDIR_T2H 0x08 -#define ASC_SCSIDIR_H2T 0x10 -#define ASC_SCSIDIR_NODATA 0x18 -#define SCSI_ASC_NOMEDIA 0x3A -#define ASC_SRB_HOST(x) ((uchar)((uchar)(x) >> 4)) -#define ASC_SRB_TID(x) ((uchar)((uchar)(x) & (uchar)0x0F)) -#define ASC_SRB_LUN(x) ((uchar)((uint)(x) >> 13)) -#define PUT_CDB1(x) ((uchar)((uint)(x) >> 8)) #define MS_SDTR_LEN 0x03 #define MS_WDTR_LEN 0x02 @@ -417,19 +382,6 @@ typedef struct asc_sg_head { ASC_SG_LIST sg_list[ASC_MAX_SG_LIST]; } ASC_SG_HEAD; -#define ASC_MIN_SG_LIST 2 - -typedef struct asc_min_sg_head { - ushort entry_cnt; - ushort queue_cnt; - ushort entry_to_copy; - ushort res; - ASC_SG_LIST sg_list[ASC_MIN_SG_LIST]; -} ASC_MIN_SG_HEAD; - -#define QCX_SORT (0x0001) -#define QCX_COALEASE (0x0002) - typedef struct asc_scsi_q { ASC_SCSIQ_1 q1; ASC_SCSIQ_2 q2; @@ -486,34 +438,9 @@ typedef struct asc_risc_sg_list_q { ASC_SG_LIST sg_list[7]; } ASC_RISC_SG_LIST_Q; -#define ASC_EXE_SCSI_IO_MAX_IDLE_LOOP 0x1000000UL -#define ASC_EXE_SCSI_IO_MAX_WAIT_LOOP 1024 -#define ASCQ_ERR_NO_ERROR 0 -#define ASCQ_ERR_IO_NOT_FOUND 1 -#define ASCQ_ERR_LOCAL_MEM 2 -#define ASCQ_ERR_CHKSUM 3 -#define ASCQ_ERR_START_CHIP 4 -#define ASCQ_ERR_INT_TARGET_ID 5 -#define ASCQ_ERR_INT_LOCAL_MEM 6 -#define ASCQ_ERR_HALT_RISC 7 -#define ASCQ_ERR_GET_ASPI_ENTRY 8 -#define ASCQ_ERR_CLOSE_ASPI 9 -#define ASCQ_ERR_HOST_INQUIRY 0x0A -#define ASCQ_ERR_SAVED_SRB_BAD 0x0B -#define ASCQ_ERR_QCNTL_SG_LIST 0x0C #define ASCQ_ERR_Q_STATUS 0x0D -#define ASCQ_ERR_WR_SCSIQ 0x0E -#define ASCQ_ERR_PC_ADDR 0x0F -#define ASCQ_ERR_SYN_OFFSET 0x10 -#define ASCQ_ERR_SYN_XFER_TIME 0x11 -#define ASCQ_ERR_LOCK_DMA 0x12 -#define ASCQ_ERR_UNLOCK_DMA 0x13 -#define ASCQ_ERR_VDS_CHK_INSTALL 0x14 -#define ASCQ_ERR_MICRO_CODE_HALT 0x15 -#define ASCQ_ERR_SET_LRAM_ADDR 0x16 #define ASCQ_ERR_CUR_QNG 0x17 #define ASCQ_ERR_SG_Q_LINKS 0x18 -#define ASCQ_ERR_SCSIQ_PTR 0x19 #define ASCQ_ERR_ISR_RE_ENTRY 0x1A #define ASCQ_ERR_CRITICAL_RE_ENTRY 0x1B #define ASCQ_ERR_ISR_ON_CRITICAL 0x1C @@ -529,7 +456,6 @@ typedef struct asc_risc_sg_list_q { #define ASC_WARN_CMD_QNG_CONFLICT 0x0010 #define ASC_WARN_EEPROM_RECOVER 0x0020 #define ASC_WARN_CFG_MSW_RECOVER 0x0040 -#define ASC_WARN_SET_PCI_CONFIG_SPACE 0x0080 /* * Error code values are set in ASC_DVC_VAR 'err_code'. @@ -549,27 +475,21 @@ typedef struct asc_risc_sg_list_q { #define ASC_IERR_SET_SDTR 0x1000 #define ASC_IERR_RW_LRAM 0x8000 -#define ASC_DEF_IRQ_NO 10 #define ASC_MAX_IRQ_NO 15 #define ASC_MIN_IRQ_NO 10 -#define ASC_MIN_REMAIN_Q (0x02) #define ASC_DEF_MAX_TOTAL_QNG (0xF0) #define ASC_MIN_TAG_Q_PER_DVC (0x04) -#define ASC_DEF_TAG_Q_PER_DVC (0x04) -#define ASC_MIN_FREE_Q ASC_MIN_REMAIN_Q +#define ASC_MIN_FREE_Q (0x02) #define ASC_MIN_TOTAL_QNG ((ASC_MAX_SG_QUEUE)+(ASC_MIN_FREE_Q)) #define ASC_MAX_TOTAL_QNG 240 #define ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG 16 #define ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG 8 #define ASC_MAX_PCI_INRAM_TOTAL_QNG 20 #define ASC_MAX_INRAM_TAG_QNG 16 -#define ASC_IOADR_TABLE_MAX_IX 11 #define ASC_IOADR_GAP 0x10 -#define ASC_LIB_SCSIQ_WK_SP 256 #define ASC_MAX_SYN_XFER_NO 16 #define ASC_SYN_MAX_OFFSET 0x0F #define ASC_DEF_SDTR_OFFSET 0x0F -#define ASC_DEF_SDTR_INDEX 0x00 #define ASC_SDTR_ULTRA_PCI_10MB_INDEX 0x02 #define SYN_XFER_NS_0 25 #define SYN_XFER_NS_1 30 @@ -648,7 +568,6 @@ typedef struct asc_dvc_cfg { #define ASC_DEF_DVC_CNTL 0xFFFF #define ASC_DEF_CHIP_SCSI_ID 7 #define ASC_DEF_ISA_DMA_SPEED 4 -#define ASC_INIT_STATE_NULL 0x0000 #define ASC_INIT_STATE_BEG_GET_CFG 0x0001 #define ASC_INIT_STATE_END_GET_CFG 0x0002 #define ASC_INIT_STATE_BEG_SET_CFG 0x0004 @@ -740,12 +659,7 @@ typedef struct asc_cap_info_array { #define ASC_EEP_MAX_DVC_ADDR_VL 15 #define ASC_EEP_DVC_CFG_BEG 32 #define ASC_EEP_MAX_DVC_ADDR 45 -#define ASC_EEP_DEFINED_WORDS 10 -#define ASC_EEP_MAX_ADDR 63 -#define ASC_EEP_RES_WORDS 0 #define ASC_EEP_MAX_RETRY 20 -#define ASC_MAX_INIT_BUSY_RETRY 8 -#define ASC_EEP_ISA_PNP_WSIZE 16 /* * These macros keep the chip SCSI id and ISA DMA speed @@ -781,17 +695,11 @@ typedef struct asceep_config { ushort chksum; } ASCEEP_CONFIG; -#define ASC_PCI_CFG_LSW_SCSI_PARITY 0x0800 -#define ASC_PCI_CFG_LSW_BURST_MODE 0x0080 -#define ASC_PCI_CFG_LSW_INTR_ABLE 0x0020 - #define ASC_EEP_CMD_READ 0x80 #define ASC_EEP_CMD_WRITE 0x40 #define ASC_EEP_CMD_WRITE_ABLE 0x30 #define ASC_EEP_CMD_WRITE_DISABLE 0x00 #define ASC_OVERRUN_BSIZE 0x00000048UL -#define ASC_CTRL_BREAK_ONCE 0x0001 -#define ASC_CTRL_BREAK_STAY_IDLE 0x0002 #define ASCV_MSGOUT_BEG 0x0000 #define ASCV_MSGOUT_SDTR_PERIOD (ASCV_MSGOUT_BEG+3) #define ASCV_MSGOUT_SDTR_OFFSET (ASCV_MSGOUT_BEG+4) @@ -1105,7 +1013,6 @@ static int AscPutReadySgListQueue(ASC_DVC_VAR *, ASC_SCSI_Q *, uchar); static int AscSetChipSynRegAtID(PortAddr, uchar, uchar); static int AscSetRunChipSynRegAtID(PortAddr, uchar, uchar); static ushort AscInitLram(ASC_DVC_VAR *); -static ushort AscInitQLinkVar(ASC_DVC_VAR *); static int AscSetLibErrorCode(ASC_DVC_VAR *, ushort); static int AscIsrChipHalted(ASC_DVC_VAR *); static uchar _AscCopyLramScsiDoneQ(PortAddr, ushort, @@ -1131,10 +1038,6 @@ static void AscEnableIsaDma(uchar); #endif /* CONFIG_ISA */ static const char *advansys_info(struct Scsi_Host *shost); -/* - * --- Adv Library Constants and Macros - */ - #define ADV_LIB_VERSION_MAJOR 5 #define ADV_LIB_VERSION_MINOR 14 @@ -1515,10 +1418,6 @@ typedef struct adveep_38C1600_config { * EEPROM Commands */ #define ASC_EEP_CMD_DONE 0x0200 -#define ASC_EEP_CMD_DONE_ERR 0x0001 - -/* cfg_word */ -#define EEP_CFG_WORD_BIG_ENDIAN 0x8000 /* bios_ctrl */ #define BIOS_CTRL_BIOS 0x0001 @@ -1675,8 +1574,6 @@ typedef struct adveep_38C1600_config { #define ADV_CHIP_ID_BYTE 0x25 #define ADV_CHIP_ID_WORD 0x04C1 -#define ADV_SC_SCSI_BUS_RESET 0x2000 - #define ADV_INTR_ENABLE_HOST_INTR 0x01 #define ADV_INTR_ENABLE_SEL_INTR 0x02 #define ADV_INTR_ENABLE_DPR_INTR 0x04 @@ -1716,8 +1613,6 @@ typedef struct adveep_38C1600_config { #define ADV_TICKLE_B 0x02 #define ADV_TICKLE_C 0x03 -#define ADV_SCSI_CTRL_RSTOUT 0x2000 - #define AdvIsIntPending(port) \ (AdvReadWordRegister(port, IOPW_CTRL_REG) & ADV_CTRL_REG_HOST_INTR) @@ -1870,14 +1765,11 @@ typedef struct adveep_38C1600_config { */ #define INTAB 0x01 -/* a_advlib.h */ - /* * Adv Library Status Definitions */ #define ADV_TRUE 1 #define ADV_FALSE 0 -#define ADV_NOERROR 1 #define ADV_SUCCESS 1 #define ADV_BUSY 0 #define ADV_ERROR (-1) @@ -1888,7 +1780,6 @@ typedef struct adveep_38C1600_config { #define ASC_WARN_BUSRESET_ERROR 0x0001 /* SCSI Bus Reset error */ #define ASC_WARN_EEPROM_CHKSUM 0x0002 /* EEP check sum error */ #define ASC_WARN_EEPROM_TERMINATION 0x0004 /* EEP termination bad field */ -#define ASC_WARN_SET_PCI_CONFIG_SPACE 0x0080 /* PCI config space set error */ #define ASC_WARN_ERROR 0xFFFF /* ADV_ERROR return */ #define ADV_MAX_TID 15 /* max. target identifier */ @@ -2206,10 +2097,8 @@ typedef struct adv_scsi_req_q { /* * Wait loop time out values. */ -#define SCSI_WAIT_10_SEC 10UL /* 10 seconds */ #define SCSI_WAIT_100_MSEC 100UL /* 100 milliseconds */ #define SCSI_US_PER_MSEC 1000 /* microseconds per millisecond */ -#define SCSI_MS_PER_SEC 1000UL /* milliseconds per second */ #define SCSI_MAX_RETRY 10 /* retry count */ #define ADV_ASYNC_RDMA_FAILURE 0x01 /* Fatal RDMA failure. */ @@ -2443,10 +2332,6 @@ do { \ (sizeof(ADV_SG_BLOCK) * \ ((ADV_MAX_SG_LIST + (NO_OF_SG_PER_BLOCK - 1))/NO_OF_SG_PER_BLOCK)) -/* - * --- Driver Constants and Macros - */ - /* Reference Scsi_Host hostdata */ #define ASC_BOARDP(host) ((asc_board_t *) &((host)->hostdata)) @@ -2792,10 +2677,6 @@ static ASC_SG_HEAD asc_sg_head = { 0 }; static int asc_dbglvl = 3; #endif /* ADVANSYS_DEBUG */ -/* - * --- Driver Function Prototypes - */ - static int advansys_slave_configure(struct scsi_device *); static int asc_execute_scsi_cmnd(struct scsi_cmnd *); static int asc_build_req(asc_board_t *, struct scsi_cmnd *); @@ -3358,18 +3239,10 @@ static struct scsi_host_template advansys_template = { .use_clustering = ENABLE_CLUSTERING, }; -/* - * --- Miscellaneous Driver Functions - */ - /* * First-level interrupt handler. * - * 'dev_id' is a pointer to the interrupting adapter's asc_board_t. Because - * all boards are currently checked for interrupts on each interrupt, 'dev_id' - * is not referenced. 'dev_id' could be used to identify an interrupt passed - * to the AdvanSys driver which is for a device sharing an interrupt with - * an AdvanSys adapter. + * 'dev_id' is a pointer to the interrupting adapter's Scsi_Host. */ static irqreturn_t advansys_interrupt(int irq, void *dev_id) { @@ -3381,9 +3254,6 @@ static irqreturn_t advansys_interrupt(int irq, void *dev_id) ASC_DBG1(2, "advansys_interrupt: boardp 0x%p\n", boardp); spin_lock_irqsave(&boardp->lock, flags); if (ASC_NARROW_BOARD(boardp)) { - /* - * Narrow Board - */ if (AscIsIntPending(shost->io_port)) { result = IRQ_HANDLED; ASC_STATS(shost, interrupt); @@ -3391,23 +3261,14 @@ static irqreturn_t advansys_interrupt(int irq, void *dev_id) AscISR(&boardp->dvc_var.asc_dvc_var); } } else { - /* - * Wide Board - */ ASC_DBG(1, "advansys_interrupt: before AdvISR()\n"); if (AdvISR(&boardp->dvc_var.adv_dvc_var)) { result = IRQ_HANDLED; ASC_STATS(shost, interrupt); } } - spin_unlock_irqrestore(&boardp->lock, flags); - /* - * If interrupts were enabled on entry, then they - * are now enabled here. - */ - ASC_DBG(1, "advansys_interrupt: end\n"); return result; } @@ -4110,7 +3971,7 @@ adv_get_sglist(asc_board_t *boardp, adv_req_t *reqp, struct scsi_cmnd *scp, prev_sg_block = NULL; reqp->sgblkp = NULL; - do { + for (;;) { /* * Allocate a 'adv_sgblk_t' structure from the board free * list. One 'adv_sgblk_t' structure holds NO_OF_SG_PER_BLOCK @@ -4121,8 +3982,8 @@ adv_get_sglist(asc_board_t *boardp, adv_req_t *reqp, struct scsi_cmnd *scp, ASC_STATS(scp->device->host, adv_build_nosg); /* - * Allocation failed. Free 'adv_sgblk_t' structures already - * allocated for the request. + * Allocation failed. Free 'adv_sgblk_t' structures + * already allocated for the request. */ while ((sgblkp = reqp->sgblkp) != NULL) { /* Remove 'sgblkp' from the request list. */ @@ -4133,52 +3994,50 @@ adv_get_sglist(asc_board_t *boardp, adv_req_t *reqp, struct scsi_cmnd *scp, boardp->adv_sgblkp = sgblkp; } return ASC_BUSY; - } else { - /* Complete 'adv_sgblk_t' board allocation. */ - boardp->adv_sgblkp = sgblkp->next_sgblkp; - sgblkp->next_sgblkp = NULL; + } + + /* Complete 'adv_sgblk_t' board allocation. */ + boardp->adv_sgblkp = sgblkp->next_sgblkp; + sgblkp->next_sgblkp = NULL; + + /* + * Get 8 byte aligned virtual and physical addresses + * for the allocated ADV_SG_BLOCK structure. + */ + sg_block = (ADV_SG_BLOCK *)ADV_8BALIGN(&sgblkp->sg_block); + sg_block_paddr = virt_to_bus(sg_block); + + /* + * Check if this is the first 'adv_sgblk_t' for the + * request. + */ + if (reqp->sgblkp == NULL) { + /* Request's first scatter-gather block. */ + reqp->sgblkp = sgblkp; /* - * Get 8 byte aligned virtual and physical addresses for - * the allocated ADV_SG_BLOCK structure. + * Set ADV_SCSI_REQ_T ADV_SG_BLOCK virtual and physical + * address pointers. */ - sg_block = - (ADV_SG_BLOCK *)ADV_8BALIGN(&sgblkp->sg_block); - sg_block_paddr = virt_to_bus(sg_block); + scsiqp->sg_list_ptr = sg_block; + scsiqp->sg_real_addr = cpu_to_le32(sg_block_paddr); + } else { + /* Request's second or later scatter-gather block. */ + sgblkp->next_sgblkp = reqp->sgblkp; + reqp->sgblkp = sgblkp; /* - * Check if this is the first 'adv_sgblk_t' for the request. + * Point the previous ADV_SG_BLOCK structure to + * the newly allocated ADV_SG_BLOCK structure. */ - if (reqp->sgblkp == NULL) { - /* Request's first scatter-gather block. */ - reqp->sgblkp = sgblkp; - - /* - * Set ADV_SCSI_REQ_T ADV_SG_BLOCK virtual and physical - * address pointers. - */ - scsiqp->sg_list_ptr = sg_block; - scsiqp->sg_real_addr = - cpu_to_le32(sg_block_paddr); - } else { - /* Request's second or later scatter-gather block. */ - sgblkp->next_sgblkp = reqp->sgblkp; - reqp->sgblkp = sgblkp; - - /* - * Point the previous ADV_SG_BLOCK structure to - * the newly allocated ADV_SG_BLOCK structure. - */ - prev_sg_block->sg_ptr = - cpu_to_le32(sg_block_paddr); - } + prev_sg_block->sg_ptr = cpu_to_le32(sg_block_paddr); } for (i = 0; i < NO_OF_SG_PER_BLOCK; i++) { sg_block->sg_list[i].sg_addr = - cpu_to_le32(sg_dma_address(slp)); + cpu_to_le32(sg_dma_address(slp)); sg_block->sg_list[i].sg_count = - cpu_to_le32(sg_dma_len(slp)); + cpu_to_le32(sg_dma_len(slp)); ASC_STATS_ADD(scp->device->host, sg_xfer, ASC_CEILING(sg_dma_len(slp), 512)); @@ -4192,8 +4051,6 @@ adv_get_sglist(asc_board_t *boardp, adv_req_t *reqp, struct scsi_cmnd *scp, sg_block->sg_cnt = NO_OF_SG_PER_BLOCK; prev_sg_block = sg_block; } - while (1); - /* NOTREACHED */ } /* @@ -4264,14 +4121,16 @@ static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep) ASC_DBG_PRT_SENSE(2, scp->sense_buffer, sizeof(scp->sense_buffer)); /* - * Note: The 'status_byte()' macro used by target drivers - * defined in scsi.h shifts the status byte returned by - * host drivers right by 1 bit. This is why target drivers - * also use right shifted status byte definitions. For - * instance target drivers use CHECK_CONDITION, defined to - * 0x1, instead of the SCSI defined check condition value - * of 0x2. Host drivers are supposed to return the status - * byte as it is defined by SCSI. + * Note: The 'status_byte()' macro used by + * target drivers defined in scsi.h shifts the + * status byte returned by host drivers right + * by 1 bit. This is why target drivers also + * use right shifted status byte definitions. + * For instance target drivers use + * CHECK_CONDITION, defined to 0x1, instead of + * the SCSI defined check condition value of + * 0x2. Host drivers are supposed to return + * the status byte as it is defined by SCSI. */ scp->result = DRIVER_BYTE(DRIVER_SENSE) | STATUS_BYTE(qdonep->d3.scsi_stat); @@ -4411,14 +4270,16 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp) ASC_DBG_PRT_SENSE(2, scp->sense_buffer, sizeof(scp->sense_buffer)); /* - * Note: The 'status_byte()' macro used by target drivers - * defined in scsi.h shifts the status byte returned by - * host drivers right by 1 bit. This is why target drivers - * also use right shifted status byte definitions. For - * instance target drivers use CHECK_CONDITION, defined to - * 0x1, instead of the SCSI defined check condition value - * of 0x2. Host drivers are supposed to return the status - * byte as it is defined by SCSI. + * Note: The 'status_byte()' macro used by + * target drivers defined in scsi.h shifts the + * status byte returned by host drivers right + * by 1 bit. This is why target drivers also + * use right shifted status byte definitions. + * For instance target drivers use + * CHECK_CONDITION, defined to 0x1, instead of + * the SCSI defined check condition value of + * 0x2. Host drivers are supposed to return + * the status byte as it is defined by SCSI. */ scp->result = DRIVER_BYTE(DRIVER_SENSE) | STATUS_BYTE(scsiqp->scsi_status); @@ -5718,10 +5579,6 @@ static int asc_prt_line(char *buf, int buflen, char *fmt, ...) } #endif /* CONFIG_PROC_FS */ -/* - * --- Functions Required by the Asc Library - */ - /* * void * DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words) @@ -5814,10 +5671,6 @@ AscGetChipBiosAddress(PortAddr iop_base, unsigned short bus_type) return bios_addr; } -/* - * --- Functions Required by the Adv Library - */ - /* * DvcGetPhyAddr() * @@ -5845,10 +5698,6 @@ DvcGetPhyAddr(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq, return paddr; } -/* - * --- Tracing and Debugging Functions - */ - #ifdef ADVANSYS_STATS #ifdef CONFIG_PROC_FS /* @@ -6322,10 +6171,6 @@ static void asc_prt_hex(char *f, uchar *s, int l) } #endif /* ADVANSYS_DEBUG */ -/* - * --- Asc Library Functions - */ - static ushort __devinit AscGetEisaChipCfg(PortAddr iop_base) { PortAddr eisa_cfg_iop; @@ -6537,8 +6382,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) target_ix = AscReadLramByte(iop_base, (ushort)(halt_q_addr + (ushort)ASC_SCSIQ_B_TARGET_IX)); - q_cntl = - AscReadLramByte(iop_base, + q_cntl = AscReadLramByte(iop_base, (ushort)(halt_q_addr + (ushort)ASC_SCSIQ_B_CNTL)); tid_no = ASC_TIX_TO_TID(target_ix); target_id = (uchar)ASC_TID_TO_TARGET_ID(tid_no); @@ -6562,7 +6406,6 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); return (0); } else if (int_halt_code == ASC_HALT_EXTMSG_IN) { - AscMemWordCopyPtrFromLram(iop_base, ASCV_MSGIN_BEG, (uchar *)&ext_msg, @@ -6793,9 +6636,9 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) cur_dvc_qng); /* - * Set the device queue depth to the number of - * active requests when the QUEUE FULL condition - * was encountered. + * Set the device queue depth to the + * number of active requests when the + * QUEUE FULL condition was encountered. */ boardp->queue_full |= target_id; boardp->queue_full_cnt[tid_no] = @@ -6821,9 +6664,8 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) int i; q_no = AscReadLramByte(iop_base, (ushort)ASCV_REQ_SG_LIST_QP); - if (q_no == ASC_QLINK_END) { - return (0); - } + if (q_no == ASC_QLINK_END) + return 0; q_addr = ASC_QNO_TO_QADDR(q_no); @@ -6875,8 +6717,8 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) sg_entry_cnt = ASC_MAX_SG_LIST - 1; /* - * Keep track of remaining number of SG elements that will - * need to be handled on the next interrupt. + * Keep track of remaining number of SG elements that + * will need to be handled on the next interrupt. */ scsiq->remain_sg_entry_cnt -= (ASC_MAX_SG_LIST - 1); } else { @@ -7723,36 +7565,28 @@ AscSendScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar n_q_required) sta = 0; free_q_head = (uchar)AscGetVarFreeQHead(iop_base); if (n_q_required > 1) { - if ((next_qp = AscAllocMultipleFreeQueue(iop_base, - free_q_head, (uchar) - (n_q_required))) - != (uchar)ASC_QLINK_END) { + next_qp = AscAllocMultipleFreeQueue(iop_base, free_q_head, + (uchar)n_q_required); + if (next_qp != ASC_QLINK_END) { asc_dvc->last_q_shortage = 0; scsiq->sg_head->queue_cnt = n_q_required - 1; scsiq->q1.q_no = free_q_head; - if ((sta = AscPutReadySgListQueue(asc_dvc, scsiq, - free_q_head)) == 1) { - AscPutVarFreeQHead(iop_base, next_qp); - asc_dvc->cur_total_qng += (uchar)(n_q_required); - asc_dvc->cur_dvc_qng[tid_no]++; - } - return (sta); + sta = AscPutReadySgListQueue(asc_dvc, scsiq, + free_q_head); } } else if (n_q_required == 1) { - if ((next_qp = AscAllocFreeQueue(iop_base, - free_q_head)) != - ASC_QLINK_END) { + next_qp = AscAllocFreeQueue(iop_base, free_q_head); + if (next_qp != ASC_QLINK_END) { scsiq->q1.q_no = free_q_head; - if ((sta = AscPutReadyQueue(asc_dvc, scsiq, - free_q_head)) == 1) { - AscPutVarFreeQHead(iop_base, next_qp); - asc_dvc->cur_total_qng++; - asc_dvc->cur_dvc_qng[tid_no]++; - } - return (sta); + sta = AscPutReadyQueue(asc_dvc, scsiq, free_q_head); } } - return (sta); + if (sta == 1) { + AscPutVarFreeQHead(iop_base, next_qp); + asc_dvc->cur_total_qng += (uchar)(n_q_required); + asc_dvc->cur_dvc_qng[tid_no]++; + } + return sta; } static int AscSgListToQueue(int sg_list) @@ -8072,7 +7906,7 @@ static ushort AscInitLram(ASC_DVC_VAR *asc_dvc) return (warn_code); } -static ushort AscInitQLinkVar(ASC_DVC_VAR *asc_dvc) +static void AscInitQLinkVar(ASC_DVC_VAR *asc_dvc) { PortAddr iop_base; int i; @@ -8099,7 +7933,6 @@ static ushort AscInitQLinkVar(ASC_DVC_VAR *asc_dvc) for (i = 0; i < 32; i++, lram_addr += 2) { AscWriteLramWord(iop_base, lram_addr, 0); } - return (0); } static int AscSetLibErrorCode(ASC_DVC_VAR *asc_dvc, ushort err_code) @@ -8396,10 +8229,10 @@ static int AscResetChipAndScsiBus(ASC_DVC_VAR *asc_dvc) static ASC_DCNT __devinit AscGetMaxDmaCount(ushort bus_type) { if (bus_type & ASC_IS_ISA) - return (ASC_MAX_ISA_DMA_COUNT); + return ASC_MAX_ISA_DMA_COUNT; else if (bus_type & (ASC_IS_EISA | ASC_IS_VL)) - return (ASC_MAX_VL_DMA_COUNT); - return (ASC_MAX_PCI_DMA_COUNT); + return ASC_MAX_VL_DMA_COUNT; + return ASC_MAX_PCI_DMA_COUNT; } #ifdef CONFIG_ISA @@ -9262,26 +9095,22 @@ static void AscAsyncFix(ASC_DVC_VAR *asc_dvc, struct scsi_device *sdev) char type = sdev->type; ASC_SCSI_BIT_ID_TYPE tid_bits = 1 << sdev->id; - if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN) { - if (!(asc_dvc->init_sdtr & tid_bits)) { - if ((type == TYPE_ROM) && - (strncmp(sdev->vendor, "HP ", 3) == 0)) { - asc_dvc->pci_fix_asyn_xfer_always |= tid_bits; - } - asc_dvc->pci_fix_asyn_xfer |= tid_bits; - if ((type == TYPE_PROCESSOR) || - (type == TYPE_SCANNER) || (type == TYPE_ROM) || - (type == TYPE_TAPE)) { - asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; - } + if (!(asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN)) + return; + if (asc_dvc->init_sdtr & tid_bits) + return; + + if ((type == TYPE_ROM) && (strncmp(sdev->vendor, "HP ", 3) == 0)) + asc_dvc->pci_fix_asyn_xfer_always |= tid_bits; + + asc_dvc->pci_fix_asyn_xfer |= tid_bits; + if ((type == TYPE_PROCESSOR) || (type == TYPE_SCANNER) || + (type == TYPE_ROM) || (type == TYPE_TAPE)) + asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; - if (asc_dvc->pci_fix_asyn_xfer & tid_bits) { - AscSetRunChipSynRegAtID(asc_dvc->iop_base, - sdev->id, + if (asc_dvc->pci_fix_asyn_xfer & tid_bits) + AscSetRunChipSynRegAtID(asc_dvc->iop_base, sdev->id, ASYN_SDTR_DATA_FIX_PCI_REV_AB); - } - } - } } static uchar AscReadLramByte(PortAddr iop_base, ushort addr) @@ -9443,12 +9272,6 @@ AscMemWordSetLram(PortAddr iop_base, ushort s_addr, ushort set_wval, int words) return; } -/* - * --- Adv Library Functions - */ - -/* a_mcode.h */ - /* Microcode buffer is kept after initialization for error recovery. */ static unsigned char _adv_asc3550_buf[] = { 0x00, 0x00, 0x00, 0xf2, 0x00, 0xf0, 0x00, 0x16, 0x18, 0xe4, 0x00, 0xfc, @@ -13773,7 +13596,6 @@ AdvSet38C1600EEPConfig(AdvPortAddr iop_base, ADVEEP_38C1600_CONFIG *cfg_buf) return; } -/* a_advlib.c */ /* * AdvExeScsiQueue() - Send a request to the RISC microcode program. * @@ -14198,7 +14020,6 @@ AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc, * Clear the idle command status which is set by the microcode * to a non-zero value to indicate when the command is completed. * The non-zero result is one of the IDLE_CMD_STATUS_* values - * defined in a_advlib.h. */ AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, (ushort)0); @@ -14921,6 +14742,8 @@ static int advansys_release(struct Scsi_Host *shost) return 0; } +#define ASC_IOADR_TABLE_MAX_IX 11 + static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] __devinitdata = { 0x100, 0x0110, 0x120, 0x0130, 0x140, 0x0150, 0x0190, 0x0210, 0x0230, 0x0250, 0x0330 -- 2.39.5