From 8f2abf4430ef2a131926a537ee6325dc43b0ec28 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 19 Jun 2005 01:28:02 +0200 Subject: [PATCH] [PATCH] orinoco: always use 802.11 header for rx processing If the frame has ToDS flag set, mark it by setting skb->pkt_type to PACKET_OTHERHOST, so that applications unaware of promiscous mode won't get uplink (STA->AP) packets for STA->STA transmissions relayed by the AP. Thanks to John Denker and David Gibson for finding the problem and the solution. Patch from Pavel Roskin --- drivers/net/wireless/orinoco.c | 105 ++++++++++++++++----------------- 1 file changed, 52 insertions(+), 53 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 38fd8623a4..96df288572 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -619,7 +619,9 @@ struct hermes_tx_descriptor_802_11 { u16 ethertype; } __attribute__ ((packed)); +/* Rx frame header except compatibility 802.3 header */ struct hermes_rx_descriptor { + /* Control */ u16 status; u32 time; u8 silence; @@ -627,6 +629,18 @@ struct hermes_rx_descriptor { u8 rate; u8 rxflow; u32 reserved; + + /* 802.11 header */ + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; + + /* Data length */ + u16 data_len; } __attribute__ ((packed)); /********************************************************************/ @@ -1110,12 +1124,10 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) struct net_device_stats *stats = &priv->stats; struct iw_statistics *wstats = &priv->wstats; struct sk_buff *skb = NULL; - u16 rxfid, status; - int length, data_len, data_off; - char *p; + u16 rxfid, status, fc; + int length; struct hermes_rx_descriptor desc; - struct header_struct hdr; - struct ethhdr *eh; + struct ethhdr *hdr; int err; rxfid = hermes_read_regn(hw, RXFID); @@ -1140,24 +1152,14 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) stats->rx_crc_errors++; DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name); } - stats->rx_errors++; - goto drop; - } - /* For now we ignore the 802.11 header completely, assuming - that the card's firmware has handled anything vital */ - - err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr), - rxfid, HERMES_802_3_OFFSET); - if (err) { - printk(KERN_ERR "%s: error %d reading frame header. " - "Frame dropped.\n", dev->name, err); stats->rx_errors++; goto drop; } - length = ntohs(hdr.len); - + length = le16_to_cpu(desc.data_len); + fc = le16_to_cpu(desc.frame_ctl); + /* Sanity checks */ if (length < 3) { /* No for even an 802.2 LLC header */ /* At least on Symbol firmware with PCF we get quite a @@ -1186,57 +1188,51 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) goto drop; } - skb_reserve(skb, 2); /* This way the IP header is aligned */ + /* We'll prepend the header, so reserve space for it. The worst + case is no decapsulation, when 802.3 header is prepended and + nothing is removed. 2 is for aligning the IP header. */ + skb_reserve(skb, ETH_HLEN + 2); + + err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), + ALIGN(length, 2), rxfid, + HERMES_802_2_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading frame. " + "Frame dropped.\n", dev->name, err); + stats->rx_errors++; + goto drop; + } /* Handle decapsulation * In most cases, the firmware tell us about SNAP frames. * For some reason, the SNAP frames sent by LinkSys APs * are not properly recognised by most firmwares. * So, check ourselves */ - if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || - ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || - is_ethersnap(&hdr)) { + if (length >= ENCAPS_OVERHEAD && + (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || + ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || + is_ethersnap(skb->data))) { /* These indicate a SNAP within 802.2 LLC within 802.11 frame which we'll need to de-encapsulate to the original EthernetII frame. */ - - if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */ - stats->rx_length_errors++; - goto drop; - } - - /* Remove SNAP header, reconstruct EthernetII frame */ - data_len = length - ENCAPS_OVERHEAD; - data_off = HERMES_802_3_OFFSET + sizeof(hdr); - - eh = (struct ethhdr *)skb_put(skb, ETH_HLEN); - - memcpy(eh, &hdr, 2 * ETH_ALEN); - eh->h_proto = hdr.ethertype; + hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); } else { - /* All other cases indicate a genuine 802.3 frame. No - decapsulation needed. We just throw the whole - thing in, and hope the protocol layer can deal with - it as 802.3 */ - data_len = length; - data_off = HERMES_802_3_OFFSET; - /* FIXME: we re-read from the card data we already read here */ - } - - p = skb_put(skb, data_len); - err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2), - rxfid, data_off); - if (err) { - printk(KERN_ERR "%s: error %d reading frame. " - "Frame dropped.\n", dev->name, err); - stats->rx_errors++; - goto drop; + /* 802.3 frame - prepend 802.3 header as is */ + hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); + hdr->h_proto = htons(length); } + memcpy(hdr->h_dest, desc.addr1, ETH_ALEN); + if (fc & IEEE80211_FCTL_FROMDS) + memcpy(hdr->h_source, desc.addr3, ETH_ALEN); + else + memcpy(hdr->h_source, desc.addr2, ETH_ALEN); dev->last_rx = jiffies; skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); skb->ip_summed = CHECKSUM_NONE; + if (fc & IEEE80211_FCTL_TODS) + skb->pkt_type = PACKET_OTHERHOST; /* Process the wireless stats if needed */ orinoco_stat_gather(dev, skb, &desc); @@ -1457,6 +1453,9 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) u16 newstatus; int connected; + if (priv->iw_mode == IW_MODE_MONITOR) + break; + if (len != sizeof(linkstatus)) { printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", dev->name, len); -- 2.39.5