From 8d80c5ee9c1e5bc3b72d69591101c2715a7e7fdd Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 1 Feb 2008 17:40:21 +1000 Subject: [PATCH] m68knommu: switch ColdFire PIT timer to use GENERIC_TIME Switch the ColdFire PIT timer to using GENERIC_TIME. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/coldfire/pit.c | 86 +++++++++++++++----------- 1 file changed, 51 insertions(+), 35 deletions(-) diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c index 173b754d1c..4290638012 100644 --- a/arch/m68knommu/platform/coldfire/pit.c +++ b/arch/m68knommu/platform/coldfire/pit.c @@ -3,9 +3,10 @@ /* * pit.c -- Freescale ColdFire PIT timer. Currently this type of * hardware timer only exists in the Freescale ColdFire - * 5270/5271, 5282 and other CPUs. + * 5270/5271, 5282 and 5208 CPUs. No doubt newer ColdFire + * family members will probably use it too. * - * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1999-2008, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) */ @@ -17,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -28,70 +30,84 @@ /* * By default use timer1 as the system clock timer. */ +#define FREQ ((MCF_CLK / 2) / 64) #define TA(a) (MCF_IPSBAR + MCFPIT_BASE1 + (a)) +#define INTC0 (MCF_IPSBAR + MCFICM_INTC0) + +static u32 pit_cycles_per_jiffy; +static u32 pit_cnt; /***************************************************************************/ -static irqreturn_t hw_tick(int irq, void *dummy) +static irqreturn_t pit_tick(int irq, void *dummy) { - unsigned short pcsr; + u16 pcsr; /* Reset the ColdFire timer */ pcsr = __raw_readw(TA(MCFPIT_PCSR)); __raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR)); + pit_cnt += pit_cycles_per_jiffy; return arch_timer_interrupt(irq, dummy); } /***************************************************************************/ -static struct irqaction coldfire_pit_irq = { +static struct irqaction pit_irq = { .name = "timer", .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = hw_tick, + .handler = pit_tick, }; -void hw_timer_init(void) +/***************************************************************************/ + +static cycle_t pit_read_clk(void) { - volatile unsigned char *icrp; - volatile unsigned long *imrp; + unsigned long flags; + u32 cycles; + u16 pcntr; - setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &coldfire_pit_irq); + local_irq_save(flags); + pcntr = __raw_readw(TA(MCFPIT_PCNTR)); + cycles = pit_cnt; + local_irq_restore(flags); - icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 + - MCFINTC_ICR0 + MCFINT_PIT1); - *icrp = ICR_INTRCONF; + return cycles + pit_cycles_per_jiffy - pcntr; +} - imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); - *imrp &= ~MCFPIT_IMR_IBIT; +/***************************************************************************/ - /* Set up PIT timer 1 as poll clock */ - __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR)); - __raw_writew(((MCF_CLK / 2) / 64) / HZ, TA(MCFPIT_PMR)); - __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | MCFPIT_PCSR_OVW | - MCFPIT_PCSR_RLD | MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR)); -} +static struct clocksource pit_clk = { + .name = "pit", + .rating = 250, + .read = pit_read_clk, + .shift = 20, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; /***************************************************************************/ -unsigned long hw_timer_offset(void) +void hw_timer_init(void) { - volatile unsigned long *ipr; - unsigned long pmr, pcntr, offset; + u32 imr; - ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); + setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq); - pmr = __raw_readw(TA(MCFPIT_PMR)); - pcntr = __raw_readw(TA(MCFPIT_PCNTR)); + __raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1); + imr = __raw_readl(INTC0 + MCFPIT_IMR); + imr &= ~MCFPIT_IMR_IBIT; + __raw_writel(imr, INTC0 + MCFPIT_IMR); + + /* Set up PIT timer 1 as poll clock */ + pit_cycles_per_jiffy = FREQ / HZ; + __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR)); + __raw_writew(pit_cycles_per_jiffy, TA(MCFPIT_PMR)); + __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | MCFPIT_PCSR_OVW | + MCFPIT_PCSR_RLD | MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR)); - /* - * If we are still in the first half of the upcount and a - * timer interrupt is pending, then add on a ticks worth of time. - */ - offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr; - if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT)) - offset += 1000000 / HZ; - return offset; + pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift); + clocksource_register(&pit_clk); } /***************************************************************************/ -- 2.39.5