From 8c3c52a8f00536ce55dafa055b4a211f878f3901 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 22 Mar 2007 22:24:19 +0900 Subject: [PATCH] libata: IDENTIFY backwards for drive side cable detection For drive side cable detection to work correctly, drives need to be identified backwards such that the slave device releases PDIAG- before the mater drive tries to detect cable type. ata_bus_probe() was fixed by commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c but the new EH path wasn't fixed. This patch makes new EH path do IDENTIFY backwards. ata_dev_configure() for new devices are still performed master first. This is to keep the detection messages in forward order. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 66 ++++++++++++++++++++++++++--------------- 1 file changed, 42 insertions(+), 24 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 361953a502..c89664a77a 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1743,12 +1743,17 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, { struct ata_eh_context *ehc = &ap->eh_context; struct ata_device *dev; + unsigned int new_mask = 0; unsigned long flags; int i, rc = 0; DPRINTK("ENTER\n"); - for (i = 0; i < ATA_MAX_DEVICES; i++) { + /* For PATA drive side cable detection to work, IDENTIFY must + * be done backwards such that PDIAG- is released by the slave + * device before the master device is identified. + */ + for (i = ATA_MAX_DEVICES - 1; i >= 0; i--) { unsigned int action, readid_flags = 0; dev = &ap->device[i]; @@ -1760,13 +1765,13 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) { if (ata_port_offline(ap)) { rc = -EIO; - break; + goto err; } ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE); rc = ata_dev_revalidate(dev, readid_flags); if (rc) - break; + goto err; ata_eh_done(ap, dev, ATA_EH_REVALIDATE); @@ -1784,40 +1789,53 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, rc = ata_dev_read_id(dev, &dev->class, readid_flags, dev->id); - if (rc == 0) { - ehc->i.flags |= ATA_EHI_PRINTINFO; - rc = ata_dev_configure(dev); - ehc->i.flags &= ~ATA_EHI_PRINTINFO; - } else if (rc == -ENOENT) { + switch (rc) { + case 0: + new_mask |= 1 << i; + break; + case -ENOENT: /* IDENTIFY was issued to non-existent * device. No need to reset. Just * thaw and kill the device. */ ata_eh_thaw_port(ap); - dev->class = ATA_DEV_UNKNOWN; - rc = 0; - } - - if (rc) { dev->class = ATA_DEV_UNKNOWN; break; + default: + dev->class = ATA_DEV_UNKNOWN; + goto err; } + } + } - if (ata_dev_enabled(dev)) { - spin_lock_irqsave(ap->lock, flags); - ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; - spin_unlock_irqrestore(ap->lock, flags); + /* Configure new devices forward such that user doesn't see + * device detection messages backwards. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; - /* new device discovered, configure xfermode */ - ehc->i.flags |= ATA_EHI_SETMODE; - } - } + if (!(new_mask & (1 << i))) + continue; + + ehc->i.flags |= ATA_EHI_PRINTINFO; + rc = ata_dev_configure(dev); + ehc->i.flags &= ~ATA_EHI_PRINTINFO; + if (rc) + goto err; + + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; + spin_unlock_irqrestore(ap->lock, flags); + + /* new device discovered, configure xfermode */ + ehc->i.flags |= ATA_EHI_SETMODE; } - if (rc) - *r_failed_dev = dev; + return 0; - DPRINTK("EXIT\n"); + err: + *r_failed_dev = dev; + DPRINTK("EXIT rc=%d\n", rc); return rc; } -- 2.39.5