From 875492511a4afce7880c9dd0ca71462c299b40e6 Mon Sep 17 00:00:00 2001 From: Byron Bradley Date: Wed, 9 Apr 2008 21:50:16 +0100 Subject: [PATCH] [ARM] 4955/1: Orion: Support the Buffalo Linkstation Pro/Live Platform The Buffalo Linkstation Pro/Live is the same hardware as the Kurobox Pro but without the NAND flash. This patch adds a second MACHINE_START macro to the Kurobox setup file to minimise code duplication. Signed-off-by: Byron Bradley Acked-by: Nicolas Pitre Acked-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-orion5x/Kconfig | 8 ++++++++ arch/arm/mach-orion5x/Makefile | 1 + arch/arm/mach-orion5x/kurobox_pro-setup.c | 25 +++++++++++++++++------ 3 files changed, 28 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 01c66957d8..93debf3361 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -36,6 +36,14 @@ config MACH_TS209 Say 'Y' here if you want your kernel to support the QNAP TS-109/TS-209 platform. +config MACH_LINKSTATION_PRO + bool "Buffalo Linkstation Pro/Live" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation Pro/Live platform. Both v1 and + v2 devices are supported. + endmenu endif diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index d894caa506..9301bf5591 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -2,5 +2,6 @@ obj-y += common.o addr-map.o pci.o gpio.o irq.o obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o +obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_DNS323) += dns323-setup.o obj-$(CONFIG_MACH_TS209) += ts209-setup.o diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 8ad4390b4b..91413455be 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -178,11 +178,6 @@ static struct mv_sata_platform_data kurobox_pro_sata_data = { * General Setup ****************************************************************************/ -static struct platform_device *kurobox_pro_devices[] __initdata = { - &kurobox_pro_nor_flash, - &kurobox_pro_nand_flash, -}; - static void __init kurobox_pro_init(void) { /* @@ -224,12 +219,15 @@ static void __init kurobox_pro_init(void) orion5x_gpio_set_valid_pins(0x0000000c); - platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices)); + platform_device_register(&kurobox_pro_nor_flash); + if (machine_is_kurobox_pro()) + platform_device_register(&kurobox_pro_nand_flash); i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); orion5x_eth_init(&kurobox_pro_eth_data); orion5x_sata_init(&kurobox_pro_sata_data); } +#ifdef CONFIG_MACH_KUROBOX_PRO MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit */ .phys_io = ORION5X_REGS_PHYS_BASE, @@ -241,3 +239,18 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") .timer = &orion5x_timer, .fixup = tag_fixup_mem32, MACHINE_END +#endif + +#ifdef CONFIG_MACH_LINKSTATION_PRO +MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") + /* Maintainer: Byron Bradley */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = kurobox_pro_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END +#endif -- 2.39.5