From 8542b200cbe5609edd7aae0c304c091a1c290452 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Thu, 7 Dec 2006 02:14:09 +0100 Subject: [PATCH] [PATCH] paravirt: Add option to allow skipping the timer check Add a way to disable the timer IRQ routing check via a boot option. The VMI timer code uses this to avoid triggering the pester Mingo code, which probes for some very unusual and broken motherboard routings. It fires 100% of the time when using a paravirtual delay mechanism instead of using a realtime delay, since there is no elapsed real time, and the 4 timer IRQs have not yet been delivered. In addition, it is entirely possible, though improbable, that this bug could surface on real hardware which picks a particularly bad time to enter SMM mode, causing a long latency during one of the timer IRQs. While here, make check_timer be __init. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen [chrisw: use no_timer_check to bring inline with x86_64 as per Andi's request] Signed-off-by: Chris Wright Cc: Andi Kleen Signed-off-by: Andrew Morton --- Documentation/kernel-parameters.txt | 7 +++++-- arch/i386/kernel/io_apic.c | 16 ++++++++++++++-- 2 files changed, 19 insertions(+), 4 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2e1898e4e8..4e90aa427a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -599,8 +599,6 @@ and is between 256 and 4096 characters. It is defined in the file hugepages= [HW,IA-32,IA-64] Maximal number of HugeTLB pages. - noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing - i8042.direct [HW] Put keyboard port into non-translated mode i8042.dumbkbd [HW] Pretend that controller can only read data from keyboard and cannot control its state @@ -1052,9 +1050,14 @@ and is between 256 and 4096 characters. It is defined in the file in certain environments such as networked servers or real-time systems. + noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing + noirqdebug [IA-32] Disables the code which attempts to detect and disable unhandled interrupt sources. + no_timer_check [IA-32,X86_64,APIC] Disables the code which tests for + broken timer IRQ sources. + noisapnp [ISAPNP] Disables ISA PnP code. noinitrd [RAM] Tells the kernel not to load any configured diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index e33b7a8452..993150f206 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -1932,6 +1932,15 @@ static void __init setup_ioapic_ids_from_mpc(void) static void __init setup_ioapic_ids_from_mpc(void) { } #endif +static int no_timer_check __initdata; + +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + /* * There is a nasty bug in some older SMP boards, their mptable lies * about the timer IRQ. We do the following to work around the situation: @@ -1940,10 +1949,13 @@ static void __init setup_ioapic_ids_from_mpc(void) { } * - if this function detects that timer IRQs are defunct, then we fall * back to ISA timer IRQs */ -static int __init timer_irq_works(void) +int __init timer_irq_works(void) { unsigned long t1 = jiffies; + if (no_timer_check) + return 1; + local_irq_enable(); /* Let ten ticks pass... */ mdelay((10 * 1000) / HZ); @@ -2214,7 +2226,7 @@ int timer_uses_ioapic_pin_0; * is so screwy. Thanks to Brian Perkins for testing/hacking this beast * fanatically on his truly buggy board. */ -static inline void check_timer(void) +static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; int vector; -- 2.39.5