From 84542838a3829f34630c589c1eb570656c455a1c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 3 Feb 2006 03:04:07 -0800 Subject: [PATCH] [PATCH] rio cleanups INKERNEL is always defined HOST is never defined therefore RTA is also never defined Strip the relevant garbage out of the headers on this basis. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/rio/cirrus.h | 142 ------------------------------------ drivers/char/rio/defaults.h | 7 -- drivers/char/rio/link.h | 34 --------- drivers/char/rio/list.h | 140 ----------------------------------- drivers/char/rio/parmmap.h | 5 -- drivers/char/rio/phb.h | 133 --------------------------------- drivers/char/rio/pkt.h | 27 ------- drivers/char/rio/qbuf.h | 4 - drivers/char/rio/riotypes.h | 66 ----------------- drivers/char/rio/rup.h | 5 -- drivers/char/rio/sam.h | 4 - 11 files changed, 567 deletions(-) diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h index 217ff09f2f..89bd94eb45 100644 --- a/drivers/char/rio/cirrus.h +++ b/drivers/char/rio/cirrus.h @@ -40,148 +40,6 @@ #endif #define _cirrus_h 1 -#ifdef RTA -#define TO_UART RX -#define TO_DRIVER TX -#endif - -#ifdef HOST -#define TO_UART TX -#define TO_DRIVER RX -#endif -#ifdef RTA -/* Miscellaneous defines for CIRRUS addresses and related logic for - interrupts etc. -*/ -#define MAP(a) ((short *)(cirrus_base + (a))) -#define outp(a,b) (*MAP (a) =(b)) -#define inp(a) ((*MAP (a)) & 0xff) -#define CIRRUS_FIRST (short*)0x7300 -#define CIRRUS_SECOND (short*)0x7200 -#define CIRRUS_THIRD (short*)0x7100 -#define CIRRUS_FOURTH (short*)0x7000 -#define PORTS_ON_CIRRUS 4 -#define CIRRUS_FIFO_SIZE 12 -#define SPACE 0x20 -#define TAB 0x09 -#define LINE_FEED 0x0a -#define CARRIAGE_RETURN 0x0d -#define BACKSPACE 0x08 -#define SPACES_IN_TABS 8 -#define SEND_ESCAPE 0x00 -#define START_BREAK 0x81 -#define TIMER_TICK 0x82 -#define STOP_BREAK 0x83 -#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH))) -#define txack1 ((short *)0x7104) -#define rxack1 ((short *)0x7102) -#define mdack1 ((short *)0x7106) -#define txack2 ((short *)0x7006) -#define rxack2 ((short *)0x7004) -#define mdack2 ((short *)0x7100) -#define int_latch ((short *) 0x7800) -#define int_status ((short *) 0x7c00) -#define tx1_pending 0x20 -#define rx1_pending 0x10 -#define md1_pending 0x40 -#define tx2_pending 0x02 -#define rx2_pending 0x01 -#define md2_pending 0x40 -#define module1_bits 0x07 -#define module1_modern 0x08 -#define module2_bits 0x70 -#define module2_modern 0x80 -#define module_blank 0xf -#define rs232_d25 0x0 -#define rs232_rj45 0x1 -#define rs422_d25 0x3 -#define parallel 0x5 - -#define CLK0 0x00 -#define CLK1 0x01 -#define CLK2 0x02 -#define CLK3 0x03 -#define CLK4 0x04 - -#define CIRRUS_REVC 0x42 -#define CIRRUS_REVE 0x44 - -#define TURNON 1 -#define TURNOFF 0 - -/* The list of CIRRUS registers. - NB. These registers are relative values on 8 bit boundaries whereas - on the RTA's the CIRRUS registers are on word boundaries. Use pointer - arithmetic (short *) to obtain the real addresses required */ -#define ccr 0x05 /* Channel Command Register */ -#define ier 0x06 /* Interrupt Enable Register */ -#define cor1 0x08 /* Channel Option Register 1 */ -#define cor2 0x09 /* Channel Option Register 2 */ -#define cor3 0x0a /* Channel Option Register 3 */ -#define cor4 0x1e /* Channel Option Register 4 */ -#define cor5 0x1f /* Channel Option Register 5 */ - -#define ccsr 0x0b /* Channel Control Status Register */ -#define rdcr 0x0e /* Receive Data Count Register */ -#define tdcr 0x12 /* Transmit Data Count Register */ -#define mcor1 0x15 /* Modem Change Option Register 1 */ -#define mcor2 0x16 /* Modem Change Option Regsiter 2 */ - -#define livr 0x18 /* Local Interrupt Vector Register */ -#define schr1 0x1a /* Special Character Register 1 */ -#define schr2 0x1b /* Special Character Register 2 */ -#define schr3 0x1c /* Special Character Register 3 */ -#define schr4 0x1d /* Special Character Register 4 */ - -#define rtr 0x20 /* Receive Timer Register */ -#define rtpr 0x21 /* Receive Timeout Period Register */ -#define lnc 0x24 /* Lnext character */ - -#define rivr 0x43 /* Receive Interrupt Vector Register */ -#define tivr 0x42 /* Transmit Interrupt Vector Register */ -#define mivr 0x41 /* Modem Interrupt Vector Register */ -#define gfrcr 0x40 /* Global Firmware Revision code Reg */ -#define ricr 0x44 /* Receive Interrupting Channel Reg */ -#define ticr 0x45 /* Transmit Interrupting Channel Reg */ -#define micr 0x46 /* Modem Interrupting Channel Register */ - -#define gcr 0x4b /* Global configuration register */ -#define misr 0x4c /* Modem interrupt status register */ - -#define rbusr 0x59 -#define tbusr 0x5a -#define mbusr 0x5b - -#define eoir 0x60 /* End Of Interrupt Register */ -#define rdsr 0x62 /* Receive Data / Status Register */ -#define tdr 0x63 /* Transmit Data Register */ -#define svrr 0x67 /* Service Request Register */ - -#define car 0x68 /* Channel Access Register */ -#define mir 0x69 /* Modem Interrupt Register */ -#define tir 0x6a /* Transmit Interrupt Register */ -#define rir 0x6b /* Receive Interrupt Register */ -#define msvr1 0x6c /* Modem Signal Value Register 1 */ -#define msvr2 0x6d /* Modem Signal Value Register 2 */ -#define psvr 0x6f /* Printer Signal Value Register */ - -#define tbpr 0x72 /* Transmit Baud Rate Period Register */ -#define tcor 0x76 /* Transmit Clock Option Register */ - -#define rbpr 0x78 /* Receive Baud Rate Period Register */ -#define rber 0x7a /* Receive Baud Rate Extension Register */ -#define rcor 0x7c /* Receive Clock Option Register */ -#define ppr 0x7e /* Prescalar Period Register */ - -/* Misc registers used for forcing the 1400 out of its reset woes */ -#define airl 0x6d -#define airm 0x6e -#define airh 0x6f -#define btcr 0x66 -#define mtcr 0x6c -#define tber 0x74 - -#endif /* #ifdef RTA */ /* Bit fields for particular registers */ diff --git a/drivers/char/rio/defaults.h b/drivers/char/rio/defaults.h index 5b600c32ac..d55c2f6a98 100644 --- a/drivers/char/rio/defaults.h +++ b/drivers/char/rio/defaults.h @@ -45,13 +45,6 @@ static char *_rio_defaults_h_sccs = "@(#)defaults.h 1.1"; #define MILLISECOND (int) (1000/64) /* 15.625 low ticks */ #define SECOND (int) 15625 /* Low priority ticks */ -#ifdef RTA -#define RX_LIMIT (ushort) 3 -#endif -#ifdef HOST -#define RX_LIMIT (ushort) 1 -#endif - #define LINK_TIMEOUT (int) (POLL_PERIOD / 2) diff --git a/drivers/char/rio/link.h b/drivers/char/rio/link.h index bfba5b0c03..48d68ca7f8 100644 --- a/drivers/char/rio/link.h +++ b/drivers/char/rio/link.h @@ -102,30 +102,14 @@ /* ** LED stuff */ -#if defined(RTA) -#define LED_OFF ((ushort) 0) /* LED off */ -#define LED_RED ((ushort) 1) /* LED Red */ -#define LED_GREEN ((ushort) 2) /* LED Green */ -#define LED_ORANGE ((ushort) 4) /* LED Orange */ -#define LED_1TO8_OPEN ((ushort) 1) /* Port 1->8 LED on */ -#define LED_9TO16_OPEN ((ushort) 2) /* Port 9->16 LED on */ -#define LED_SET_COLOUR(colour) (link->led = (colour)) -#define LED_OR_COLOUR(colour) (link->led |= (colour)) -#define LED_TIMEOUT(time) (link->led_timeout = RioTimePlus(RioTime(),(time))) -#else #define LED_SET_COLOUR(colour) #define LED_OR_COLOUR(colour) #define LED_TIMEOUT(time) -#endif /* RTA */ struct LPB { WORD link_number; /* Link Number */ Channel_ptr in_ch; /* Link In Channel */ Channel_ptr out_ch; /* Link Out Channel */ -#ifdef RTA - uchar stat_led; /* Port open leds */ - uchar led; /* True, light led! */ -#endif BYTE attached_serial[4]; /* Attached serial number */ BYTE attached_host_serial[4]; /* Serial number of Host who @@ -144,30 +128,12 @@ struct LPB { WORD WaitNoBoot; /* Secs to hold off booting */ PKT_ptr add_packet_list; /* Add packets to here */ PKT_ptr remove_packet_list; /* Send packets from here */ -#ifdef RTA -#ifdef DCIRRUS -#define QBUFS_PER_REDIRECT (4 / PKTS_PER_BUFFER + 1) -#else -#define QBUFS_PER_REDIRECT (8 / PKTS_PER_BUFFER + 1) -#endif - PKT_ptr_ptr rd_add; /* Add a new Packet here */ - Q_BUF_ptr rd_add_qb; /* Pointer to the add Q buf */ - PKT_ptr_ptr rd_add_st_qbb; /* Pointer to start of the Q's buf */ - PKT_ptr_ptr rd_add_end_qbb; /* Pointer to the end of the Q's buf */ - PKT_ptr_ptr rd_remove; /* Remove a Packet here */ - Q_BUF_ptr rd_remove_qb; /* Pointer to the remove Q buf */ - PKT_ptr_ptr rd_remove_st_qbb; /* Pointer to the start of the Q buf */ - PKT_ptr_ptr rd_remove_end_qbb; /* Pointer to the end of the Q buf */ - ushort pkts_in_q; /* Packets in queue */ -#endif Channel_ptr lrt_fail_chan; /* Lrt's failure channel */ Channel_ptr ltt_fail_chan; /* Ltt's failure channel */ -#if defined (HOST) || defined (INKERNEL) /* RUP structure for HOST to driver communications */ struct RUP rup; -#endif struct RUP link_rup; /* RUP for the link (POLL, topology etc.) */ WORD attached_link; /* Number of attached link */ diff --git a/drivers/char/rio/list.h b/drivers/char/rio/list.h index 36aad4c9cb..79b853140a 100644 --- a/drivers/char/rio/list.h +++ b/drivers/char/rio/list.h @@ -44,8 +44,6 @@ static char *_rio_list_h_sccs = "@(#)list.h 1.9"; #define PKT_IN_USE 0x1 -#ifdef INKERNEL - #define ZERO_PTR (ushort) 0x8000 #define CaD PortP->Caddr @@ -54,143 +52,5 @@ static char *_rio_list_h_sccs = "@(#)list.h 1.9"; ** to by the TxAdd pointer has PKT_IN_USE clear in its address. */ -#ifndef linux -#if defined( MIPS ) && !defined( MIPSEISA ) -/* May the shoes of the Devil dance on your grave for creating this */ -#define can_add_transmit(PacketP,PortP) \ - (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,RINDW(PortP->TxAdd))) \ - & (PKT_IN_USE<<2))) - -#elif defined(MIPSEISA) || defined(nx6000) || \ - defined(drs6000) || defined(UWsparc) - -#define can_add_transmit(PacketP,PortP) \ - (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,RINDW(PortP->TxAdd))) \ - & PKT_IN_USE)) - -#else -#define can_add_transmit(PacketP,PortP) \ - (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,*PortP->TxAdd)) \ - & PKT_IN_USE)) -#endif - -/* -** To add a packet to the queue, you set the PKT_IN_USE bit in the address, -** and then move the TxAdd pointer along one position to point to the next -** packet pointer. You must wrap the pointer from the end back to the start. -*/ -#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc) -# define add_transmit(PortP) \ - WINDW(PortP->TxAdd,RINDW(PortP->TxAdd) | PKT_IN_USE);\ - if (PortP->TxAdd == PortP->TxEnd)\ - PortP->TxAdd = PortP->TxStart;\ - else\ - PortP->TxAdd++;\ - WWORD(PortP->PhbP->tx_add , RIO_OFF(CaD,PortP->TxAdd)); -#elif defined(AIX) -# define add_transmit(PortP) \ - {\ - register ushort *TxAddP = (ushort *)RIO_PTR(Cad,PortP->TxAddO);\ - WINDW( TxAddP, RINDW( TxAddP ) | PKT_IN_USE );\ - if (PortP->TxAddO == PortP->TxEndO )\ - PortP->TxAddO = PortP->TxStartO;\ - else\ - PortP->TxAddO += sizeof(ushort);\ - WWORD(((PHB *)RIO_PTR(Cad,PortP->PhbO))->tx_add , PortP->TxAddO );\ - } -#else -# define add_transmit(PortP) \ - *PortP->TxAdd |= PKT_IN_USE;\ - if (PortP->TxAdd == PortP->TxEnd)\ - PortP->TxAdd = PortP->TxStart;\ - else\ - PortP->TxAdd++;\ - PortP->PhbP->tx_add = RIO_OFF(CaD,PortP->TxAdd); -#endif - -/* -** can_remove_receive( PacketP, PortP ) returns non-zero if PKT_IN_USE is set -** for the next packet on the queue. It will also set PacketP to point to the -** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear, -** then can_remove_receive() returns 0. -*/ -#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc) -# define can_remove_receive(PacketP,PortP) \ - ((RINDW(PortP->RxRemove) & PKT_IN_USE) ? \ - (PacketP=(struct PKT *)RIO_PTR(CaD,(RINDW(PortP->RxRemove) & ~PKT_IN_USE))):0) -#elif defined(AIX) -# define can_remove_receive(PacketP,PortP) \ - ((RINDW((ushort *)RIO_PTR(Cad,PortP->RxRemoveO)) & PKT_IN_USE) ? \ - (PacketP=(struct PKT *)RIO_PTR(Cad,RINDW((ushort *)RIO_PTR(Cad,PortP->RxRemoveO)) & ~PKT_IN_USE)):0) -#else -# define can_remove_receive(PacketP,PortP) \ - ((*PortP->RxRemove & PKT_IN_USE) ? \ - (PacketP=(struct PKT *)RIO_PTR(CaD,(*PortP->RxRemove & ~PKT_IN_USE))):0) -#endif - - -/* -** Will God see it within his heart to forgive us for this thing that -** we have created? To remove a packet from the receive queue you clear -** its PKT_IN_USE bit, and then bump the pointers. Once the pointers -** get to the end, they must be wrapped back to the start. -*/ -#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc) -# define remove_receive(PortP) \ - WINDW(PortP->RxRemove, (RINDW(PortP->RxRemove) & ~PKT_IN_USE));\ - if (PortP->RxRemove == PortP->RxEnd)\ - PortP->RxRemove = PortP->RxStart;\ - else\ - PortP->RxRemove++;\ - WWORD(PortP->PhbP->rx_remove , RIO_OFF(CaD,PortP->RxRemove)); -#elif defined(AIX) -# define remove_receive(PortP) \ - {\ - register ushort *RxRemoveP = (ushort *)RIO_PTR(Cad,PortP->RxRemoveO);\ - WINDW( RxRemoveP, RINDW( RxRemoveP ) & ~PKT_IN_USE );\ - if (PortP->RxRemoveO == PortP->RxEndO)\ - PortP->RxRemoveO = PortP->RxStartO;\ - else\ - PortP->RxRemoveO += sizeof(ushort);\ - WWORD(((PHB *)RIO_PTR(Cad,PortP->PhbO))->rx_remove, PortP->RxRemoveO );\ - } -#else -# define remove_receive(PortP) \ - *PortP->RxRemove &= ~PKT_IN_USE;\ - if (PortP->RxRemove == PortP->RxEnd)\ - PortP->RxRemove = PortP->RxStart;\ - else\ - PortP->RxRemove++;\ - PortP->PhbP->rx_remove = RIO_OFF(CaD,PortP->RxRemove); -#endif -#endif - - -#else /* !IN_KERNEL */ - -#define ZERO_PTR NULL - - -#ifdef HOST -/* #define can_remove_transmit(pkt,phb) ((((char*)pkt = (*(char**)(phb->tx_remove))-1) || 1)) && (*phb->u3.s2.tx_remove_ptr & PKT_IN_USE)) */ -#define remove_transmit(phb) *phb->u3.s2.tx_remove_ptr &= ~(ushort)PKT_IN_USE;\ - if (phb->tx_remove == phb->tx_end)\ - phb->tx_remove = phb->tx_start;\ - else\ - phb->tx_remove++; -#define can_add_receive(phb) !(*phb->u4.s2.rx_add_ptr & PKT_IN_USE) -#define add_receive(pkt,phb) *phb->rx_add = pkt;\ - *phb->u4.s2.rx_add_ptr |= PKT_IN_USE;\ - if (phb->rx_add == phb->rx_end)\ - phb->rx_add = phb->rx_start;\ - else\ - phb->rx_add++; -#endif -#endif - -#ifdef RTA -#define splx(oldspl) if ((oldspl) == 0) spl0() -#endif - #endif /* ifndef _list.h */ /*********** end of file ***********/ diff --git a/drivers/char/rio/parmmap.h b/drivers/char/rio/parmmap.h index fe4e005670..e24acc1d18 100644 --- a/drivers/char/rio/parmmap.h +++ b/drivers/char/rio/parmmap.h @@ -78,14 +78,9 @@ struct PARM_MAP { WORD idle_count; /* Idle time counter */ WORD busy_count; /* Busy counter */ WORD idle_control; /* Control Idle Process */ -#if defined(HOST) || defined(INKERNEL) WORD tx_intr; /* TX interrupt pending */ WORD rx_intr; /* RX interrupt pending */ WORD rup_intr; /* RUP interrupt pending */ -#endif -#if defined(RTA) - WORD dying_count; /* Count of processes dead */ -#endif }; #endif diff --git a/drivers/char/rio/phb.h b/drivers/char/rio/phb.h index 3baebf8513..2663ca0306 100644 --- a/drivers/char/rio/phb.h +++ b/drivers/char/rio/phb.h @@ -44,17 +44,6 @@ #endif - /************************************************* - * Set the LIMIT values. - ************************************************/ -#ifdef RTA -#define RX_LIMIT (ushort) 3 -#endif -#ifdef HOST -#define RX_LIMIT (ushort) 1 -#endif - - /************************************************* * Handshake asserted. Deasserted by the LTT(s) ************************************************/ @@ -69,11 +58,7 @@ /************************************************* * Maximum number of PHB's ************************************************/ -#if defined (HOST) || defined (INKERNEL) #define MAX_PHB ((ushort) 128) /* range 0-127 */ -#else -#define MAX_PHB ((ushort) 8) /* range 0-7 */ -#endif /************************************************* * Defines for the mode fields @@ -139,141 +124,23 @@ * the start. The pointer tx_add points to a SPACE to put a Packet. * The pointer tx_remove points to the next Packet to remove *************************************************************************/ -#ifndef INKERNEL -#define src_unit u2.s2.unit -#define src_port u2.s2.port -#define dest_unit u1.s1.unit -#define dest_port u1.s1.port -#endif -#ifdef HOST -#define tx_start u3.s1.tx_start_ptr_ptr -#define tx_add u3.s1.tx_add_ptr_ptr -#define tx_end u3.s1.tx_end_ptr_ptr -#define tx_remove u3.s1.tx_remove_ptr_ptr -#define rx_start u4.s1.rx_start_ptr_ptr -#define rx_add u4.s1.rx_add_ptr_ptr -#define rx_end u4.s1.rx_end_ptr_ptr -#define rx_remove u4.s1.rx_remove_ptr_ptr -#endif typedef struct PHB PHB; struct PHB { -#ifdef RTA - ushort port; -#endif -#ifdef INKERNEL WORD source; -#else - union { - ushort source; /* Complete source */ - struct { - unsigned char unit; /* Source unit */ - unsigned char port; /* Source port */ - } s2; - } u2; -#endif WORD handshake; WORD status; NUMBER timeout; /* Maximum of 1.9 seconds */ WORD link; /* Send down this link */ -#ifdef INKERNEL WORD destination; -#else - union { - ushort destination; /* Complete destination */ - struct { - unsigned char unit; /* Destination unit */ - unsigned char port; /* Destination port */ - } s1; - } u1; -#endif -#ifdef RTA - ushort tx_pkts_added; - ushort tx_pkts_removed; - Q_BUF_ptr tx_q_start; /* Start of the Q list chain */ - short num_tx_q_bufs; /* Number of Q buffers in the chain */ - PKT_ptr_ptr tx_add; /* Add a new Packet here */ - Q_BUF_ptr tx_add_qb; /* Pointer to the add Q buf */ - PKT_ptr_ptr tx_add_st_qbb; /* Pointer to start of the Q's buf */ - PKT_ptr_ptr tx_add_end_qbb; /* Pointer to the end of the Q's buf */ - PKT_ptr_ptr tx_remove; /* Remove a Packet here */ - Q_BUF_ptr tx_remove_qb; /* Pointer to the remove Q buf */ - PKT_ptr_ptr tx_remove_st_qbb; /* Pointer to the start of the Q buf */ - PKT_ptr_ptr tx_remove_end_qbb; /* Pointer to the end of the Q buf */ -#endif -#ifdef INKERNEL PKT_ptr_ptr tx_start; PKT_ptr_ptr tx_end; PKT_ptr_ptr tx_add; PKT_ptr_ptr tx_remove; -#endif -#ifdef HOST - union { - struct { - PKT_ptr_ptr tx_start_ptr_ptr; - PKT_ptr_ptr tx_end_ptr_ptr; - PKT_ptr_ptr tx_add_ptr_ptr; - PKT_ptr_ptr tx_remove_ptr_ptr; - } s1; - struct { - ushort *tx_start_ptr; - ushort *tx_end_ptr; - ushort *tx_add_ptr; - ushort *tx_remove_ptr; - } s2; - } u3; -#endif -#ifdef RTA - ushort rx_pkts_added; - ushort rx_pkts_removed; - Q_BUF_ptr rx_q_start; /* Start of the Q list chain */ - short num_rx_q_bufs; /* Number of Q buffers in the chain */ - PKT_ptr_ptr rx_add; /* Add a new Packet here */ - Q_BUF_ptr rx_add_qb; /* Pointer to the add Q buf */ - PKT_ptr_ptr rx_add_st_qbb; /* Pointer to start of the Q's buf */ - PKT_ptr_ptr rx_add_end_qbb; /* Pointer to the end of the Q's buf */ - PKT_ptr_ptr rx_remove; /* Remove a Packet here */ - Q_BUF_ptr rx_remove_qb; /* Pointer to the remove Q buf */ - PKT_ptr_ptr rx_remove_st_qbb; /* Pointer to the start of the Q buf */ - PKT_ptr_ptr rx_remove_end_qbb; /* Pointer to the end of the Q buf */ -#endif -#ifdef INKERNEL PKT_ptr_ptr rx_start; PKT_ptr_ptr rx_end; PKT_ptr_ptr rx_add; PKT_ptr_ptr rx_remove; -#endif -#ifdef HOST - union { - struct { - PKT_ptr_ptr rx_start_ptr_ptr; - PKT_ptr_ptr rx_end_ptr_ptr; - PKT_ptr_ptr rx_add_ptr_ptr; - PKT_ptr_ptr rx_remove_ptr_ptr; - } s1; - struct { - ushort *rx_start_ptr; - ushort *rx_end_ptr; - ushort *rx_add_ptr; - ushort *rx_remove_ptr; - } s2; - } u4; -#endif - -#ifdef RTA /* some fields for the remotes */ - ushort flush_count; /* Count of write flushes */ - ushort txmode; /* Modes for tx */ - ushort rxmode; /* Modes for rx */ - ushort portmode; /* Generic modes */ - ushort column; /* TAB3 column count */ - ushort tx_subscript; /* (TX) Subscript into data field */ - ushort rx_subscript; /* (RX) Subscript into data field */ - PKT_ptr rx_incomplete; /* Hold an incomplete packet here */ - ushort modem_bits; /* Modem bits to mask */ - ushort lastModem; /* Modem control lines. */ - ushort addr; /* Address for sub commands */ - ushort MonitorTstate; /* TRUE if monitoring tstop */ -#endif }; diff --git a/drivers/char/rio/pkt.h b/drivers/char/rio/pkt.h index 882fd429ac..7011e52e82 100644 --- a/drivers/char/rio/pkt.h +++ b/drivers/char/rio/pkt.h @@ -70,39 +70,12 @@ #define CONTROL_DATA_WNDW (DATA_WNDW << 8) struct PKT { -#ifdef INKERNEL BYTE dest_unit; /* Destination Unit Id */ BYTE dest_port; /* Destination POrt */ BYTE src_unit; /* Source Unit Id */ BYTE src_port; /* Source POrt */ -#else - union { - ushort destination; /* Complete destination */ - struct { - unsigned char unit; /* Destination unit */ - unsigned char port; /* Destination port */ - } s1; - } u1; - union { - ushort source; /* Complete source */ - struct { - unsigned char unit; /* Source unit */ - unsigned char port; /* Source port */ - } s2; - } u2; -#endif -#ifdef INKERNEL BYTE len; BYTE control; -#else - union { - ushort control; - struct { - unsigned char len; - unsigned char control; - } s3; - } u3; -#endif BYTE data[PKT_MAX_DATA_LEN]; /* Actual data :-) */ WORD csum; /* C-SUM */ diff --git a/drivers/char/rio/qbuf.h b/drivers/char/rio/qbuf.h index acd9e8e530..391ffc3355 100644 --- a/drivers/char/rio/qbuf.h +++ b/drivers/char/rio/qbuf.h @@ -46,11 +46,7 @@ static char *_rio_qbuf_h_sccs = "@(#)qbuf.h 1.1"; -#ifdef HOST -#define PKTS_PER_BUFFER 1 -#else #define PKTS_PER_BUFFER (220 / PKT_LENGTH) -#endif typedef struct Q_BUF Q_BUF; struct Q_BUF { diff --git a/drivers/char/rio/riotypes.h b/drivers/char/rio/riotypes.h index 9b67e2468b..46084d5c7e 100644 --- a/drivers/char/rio/riotypes.h +++ b/drivers/char/rio/riotypes.h @@ -43,9 +43,6 @@ #endif #endif -#ifdef INKERNEL - -#if !defined(MIPSAT) typedef unsigned short NUMBER_ptr; typedef unsigned short WORD_ptr; typedef unsigned short BYTE_ptr; @@ -65,69 +62,6 @@ typedef unsigned short RUP_ptr; typedef unsigned short short_ptr; typedef unsigned short u_short_ptr; typedef unsigned short ushort_ptr; -#else -/* MIPSAT types */ -typedef char RIO_POINTER[8]; -typedef RIO_POINTER NUMBER_ptr; -typedef RIO_POINTER WORD_ptr; -typedef RIO_POINTER BYTE_ptr; -typedef RIO_POINTER char_ptr; -typedef RIO_POINTER Channel_ptr; -typedef RIO_POINTER FREE_LIST_ptr_ptr; -typedef RIO_POINTER FREE_LIST_ptr; -typedef RIO_POINTER LPB_ptr; -typedef RIO_POINTER Process_ptr; -typedef RIO_POINTER PHB_ptr; -typedef RIO_POINTER PKT_ptr; -typedef RIO_POINTER PKT_ptr_ptr; -typedef RIO_POINTER Q_BUF_ptr; -typedef RIO_POINTER Q_BUF_ptr_ptr; -typedef RIO_POINTER ROUTE_STR_ptr; -typedef RIO_POINTER RUP_ptr; -typedef RIO_POINTER short_ptr; -typedef RIO_POINTER u_short_ptr; -typedef RIO_POINTER ushort_ptr; -#endif - -#else /* not INKERNEL */ -typedef unsigned char BYTE; -typedef unsigned short WORD; -typedef unsigned long DWORD; -typedef short NUMBER; -typedef short *NUMBER_ptr; -typedef unsigned short *WORD_ptr; -typedef unsigned char *BYTE_ptr; -typedef unsigned char uchar; -typedef unsigned short ushort; -typedef unsigned int uint; -typedef unsigned long ulong; -typedef unsigned char u_char; -typedef unsigned short u_short; -typedef unsigned int u_int; -typedef unsigned long u_long; -typedef unsigned short ERROR; -typedef unsigned long ID; -typedef char *char_ptr; -typedef Channel *Channel_ptr; -typedef struct FREE_LIST *FREE_LIST_ptr; -typedef struct FREE_LIST **FREE_LIST_ptr_ptr; -typedef struct LPB *LPB_ptr; -typedef struct Process *Process_ptr; -typedef struct PHB *PHB_ptr; -typedef struct PKT *PKT_ptr; -typedef struct PKT **PKT_ptr_ptr; -typedef struct Q_BUF *Q_BUF_ptr; -typedef struct Q_BUF **Q_BUF_ptr_ptr; -typedef struct ROUTE_STR *ROUTE_STR_ptr; -typedef struct RUP *RUP_ptr; -typedef short *short_ptr; -typedef u_short *u_short_ptr; -typedef ushort *ushort_ptr; -typedef struct PKT PKT; -typedef struct LPB LPB; -typedef struct RUP RUP; -#endif - #endif /* __riotypes__ */ diff --git a/drivers/char/rio/rup.h b/drivers/char/rio/rup.h index 8d44fec91d..f74f67c6f7 100644 --- a/drivers/char/rio/rup.h +++ b/drivers/char/rio/rup.h @@ -43,12 +43,7 @@ #endif #endif -#if defined( HOST ) || defined( INKERNEL ) #define MAX_RUP ((short) 16) -#endif -#ifdef RTA -#define MAX_RUP ((short) 1) -#endif #define PKTS_PER_RUP ((short) 2) /* They are always used in pairs */ diff --git a/drivers/char/rio/sam.h b/drivers/char/rio/sam.h index 31494054b2..6f754e1901 100644 --- a/drivers/char/rio/sam.h +++ b/drivers/char/rio/sam.h @@ -43,10 +43,6 @@ #endif -#if !defined( HOST ) && !defined( INKERNEL ) -#define RTA 1 -#endif - #define NUM_FREE_LIST_UNITS 500 #ifndef FALSE -- 2.39.5