From 843b568cf0c800b87e48fcfb171a7a83318db39c Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Dec 2006 02:39:12 -0800 Subject: [PATCH] [PATCH] Char: stallion, functions cleanup Delete macros and functions, that are implemented in kernel yet (strtoul, min, tolower). Expand one function body in place, where it is called from. Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/stallion.c | 207 ++++++++-------------------------------- 1 file changed, 40 insertions(+), 167 deletions(-) diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 596e69c2fd..4ccf4a5834 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -41,13 +41,12 @@ #include #include #include +#include #include #include -#ifdef CONFIG_PCI #include -#endif /*****************************************************************************/ @@ -63,43 +62,16 @@ #define BRD_ECH64PCI 27 #define BRD_EASYIOPCI 28 -/* - * Define a configuration structure to hold the board configuration. - * Need to set this up in the code (for now) with the boards that are - * to be configured into the system. This is what needs to be modified - * when adding/removing/modifying boards. Each line entry in the - * stl_brdconf[] array is a board. Each line contains io/irq/memory - * ranges for that board (as well as what type of board it is). - * Some examples: - * { BRD_EASYIO, 0x2a0, 0, 0, 10, 0 }, - * This line would configure an EasyIO board (4 or 8, no difference), - * at io address 2a0 and irq 10. - * Another example: - * { BRD_ECH, 0x2a8, 0x280, 0, 12, 0 }, - * This line will configure an EasyConnection 8/32 board at primary io - * address 2a8, secondary io address 280 and irq 12. - * Enter as many lines into this array as you want (only the first 4 - * will actually be used!). Any combination of EasyIO and EasyConnection - * boards can be specified. EasyConnection 8/32 boards can share their - * secondary io addresses between each other. - * - * NOTE: there is no need to put any entries in this table for PCI - * boards. They will be found automatically by the driver - provided - * PCI BIOS32 support is compiled into the kernel. - */ - -static struct stlconf { +struct stlconf { int brdtype; int ioaddr1; int ioaddr2; unsigned long memaddr; int irq; int irqtype; -} stl_brdconf[] = { - /*{ BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },*/ }; -static int stl_nrbrds = ARRAY_SIZE(stl_brdconf); +static unsigned int stl_nrbrds; /*****************************************************************************/ @@ -432,15 +404,6 @@ static unsigned int stl_baudrates[] = { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }; -/* - * Define some handy local macros... - */ -#undef MIN -#define MIN(a,b) (((a) <= (b)) ? (a) : (b)) - -#undef TOLOWER -#define TOLOWER(x) ((((x) >= 'A') && ((x) <= 'Z')) ? ((x) + 0x20) : (x)) - /*****************************************************************************/ /* @@ -659,42 +622,6 @@ static struct class *stallion_class; /*****************************************************************************/ -/* - * Convert an ascii string number into an unsigned long. - */ - -static unsigned long stl_atol(char *str) -{ - unsigned long val; - int base, c; - char *sp; - - val = 0; - sp = str; - if ((*sp == '0') && (*(sp+1) == 'x')) { - base = 16; - sp += 2; - } else if (*sp == '0') { - base = 8; - sp++; - } else { - base = 10; - } - - for (; (*sp != 0); sp++) { - c = (*sp > '9') ? (TOLOWER(*sp) - 'a' + 10) : (*sp - '0'); - if ((c < 0) || (c >= base)) { - printk("STALLION: invalid argument %s\n", str); - val = 0; - break; - } - val = (val * base) + c; - } - return val; -} - -/*****************************************************************************/ - /* * Parse the supplied argument string, into the board conf struct. */ @@ -710,7 +637,7 @@ static int __init stl_parsebrd(struct stlconf *confp, char **argp) return 0; for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++) - *sp = TOLOWER(*sp); + *sp = tolower(*sp); for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++) { if (strcmp(stl_brdstr[i].name, argp[0]) == 0) @@ -725,15 +652,15 @@ static int __init stl_parsebrd(struct stlconf *confp, char **argp) i = 1; if ((argp[i] != NULL) && (*argp[i] != 0)) - confp->ioaddr1 = stl_atol(argp[i]); + confp->ioaddr1 = simple_strtoul(argp[i], NULL, 0); i++; if (confp->brdtype == BRD_ECH) { if ((argp[i] != NULL) && (*argp[i] != 0)) - confp->ioaddr2 = stl_atol(argp[i]); + confp->ioaddr2 = simple_strtoul(argp[i], NULL, 0); i++; } if ((argp[i] != NULL) && (*argp[i] != 0)) - confp->irq = stl_atol(argp[i]); + confp->irq = simple_strtoul(argp[i], NULL, 0); return 1; } @@ -758,32 +685,6 @@ static struct stlbrd *stl_allocbrd(void) return brdp; } -static void __init stl_argbrds(void) -{ - struct stlconf conf; - struct stlbrd *brdp; - int i; - - pr_debug("stl_argbrds()\n"); - - for (i = stl_nrbrds; (i < stl_nargs); i++) { - memset(&conf, 0, sizeof(conf)); - if (stl_parsebrd(&conf, stl_brdsp[i]) == 0) - continue; - if ((brdp = stl_allocbrd()) == NULL) - continue; - stl_nrbrds = i + 1; - brdp->brdnr = i; - brdp->brdtype = conf.brdtype; - brdp->ioaddr1 = conf.ioaddr1; - brdp->ioaddr2 = conf.ioaddr2; - brdp->irq = conf.irq; - brdp->irqtype = conf.irqtype; - if (stl_brdinit(brdp)) - kfree(brdp); - } -} - /*****************************************************************************/ static int stl_open(struct tty_struct *tty, struct file *filp) @@ -1089,10 +990,10 @@ static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count stlen = len; } - len = MIN(len, count); + len = min(len, (unsigned int)count); count = 0; while (len > 0) { - stlen = MIN(len, stlen); + stlen = min(len, stlen); memcpy(head, chbuf, stlen); len -= stlen; chbuf += stlen; @@ -2549,56 +2450,6 @@ static struct pci_driver stl_pcidriver = { /*****************************************************************************/ -/* - * Scan through all the boards in the configuration and see what we - * can find. Handle EIO and the ECH boards a little differently here - * since the initial search and setup is too different. - */ - -static int __init stl_initbrds(void) -{ - struct stlbrd *brdp; - struct stlconf *confp; - int i; - - pr_debug("stl_initbrds()\n"); - - if (stl_nrbrds > STL_MAXBRDS) { - printk("STALLION: too many boards in configuration table, " - "truncating to %d\n", STL_MAXBRDS); - stl_nrbrds = STL_MAXBRDS; - } - -/* - * Firstly scan the list of static boards configured. Allocate - * resources and initialize the boards as found. - */ - for (i = 0; (i < stl_nrbrds); i++) { - confp = &stl_brdconf[i]; - stl_parsebrd(confp, stl_brdsp[i]); - if ((brdp = stl_allocbrd()) == NULL) - return(-ENOMEM); - brdp->brdnr = i; - brdp->brdtype = confp->brdtype; - brdp->ioaddr1 = confp->ioaddr1; - brdp->ioaddr2 = confp->ioaddr2; - brdp->irq = confp->irq; - brdp->irqtype = confp->irqtype; - if (stl_brdinit(brdp)) - kfree(brdp); - } - -/* - * Find any dynamically supported boards. That is via module load - * line options or auto-detected on the PCI bus. - */ - stl_argbrds(); - - return(0); -} - -/*****************************************************************************/ - /* * Return the board stats structure to user app. */ @@ -3691,9 +3542,9 @@ static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr) } outb(srer, (ioaddr + EREG_DATA)); } else { - len = MIN(len, CD1400_TXFIFOSIZE); + len = min(len, CD1400_TXFIFOSIZE); portp->stats.txtotal += len; - stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail)); + stlen = min(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail)); outb((TDR + portp->uartaddr), ioaddr); outsb((ioaddr + EREG_DATA), tail, stlen); len -= stlen; @@ -3746,13 +3597,13 @@ static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr) outb((RDCR + portp->uartaddr), ioaddr); len = inb(ioaddr + EREG_DATA); if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { - len = MIN(len, sizeof(stl_unwanted)); + len = min(len, sizeof(stl_unwanted)); outb((RDSR + portp->uartaddr), ioaddr); insb((ioaddr + EREG_DATA), &stl_unwanted[0], len); portp->stats.rxlost += len; portp->stats.rxtotal += len; } else { - len = MIN(len, buflen); + len = min(len, buflen); if (len > 0) { unsigned char *ptr; outb((RDSR + portp->uartaddr), ioaddr); @@ -4615,9 +4466,9 @@ static void stl_sc26198txisr(struct stlport *portp) outb(mr0, (ioaddr + XP_DATA)); } } else { - len = MIN(len, SC26198_TXFIFOSIZE); + len = min(len, SC26198_TXFIFOSIZE); portp->stats.txtotal += len; - stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail)); + stlen = min(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail)); outb(GTXFIFO, (ioaddr + XP_ADDR)); outsb((ioaddr + XP_DATA), tail, stlen); len -= stlen; @@ -4658,13 +4509,13 @@ static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack) if ((iack & IVR_TYPEMASK) == IVR_RXDATA) { if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { - len = MIN(len, sizeof(stl_unwanted)); + len = min(len, sizeof(stl_unwanted)); outb(GRXFIFO, (ioaddr + XP_ADDR)); insb((ioaddr + XP_DATA), &stl_unwanted[0], len); portp->stats.rxlost += len; portp->stats.rxtotal += len; } else { - len = MIN(len, buflen); + len = min(len, buflen); if (len > 0) { unsigned char *ptr; outb(GRXFIFO, (ioaddr + XP_ADDR)); @@ -4831,6 +4682,8 @@ static void stl_sc26198otherisr(struct stlport *portp, unsigned int iack) */ static int __init stallion_module_init(void) { + struct stlbrd *brdp; + struct stlconf conf; unsigned int i, retval; printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion); @@ -4838,7 +4691,27 @@ static int __init stallion_module_init(void) spin_lock_init(&stallion_lock); spin_lock_init(&brd_lock); - stl_initbrds(); +/* + * Find any dynamically supported boards. That is via module load + * line options. + */ + for (i = stl_nrbrds; i < stl_nargs; i++) { + memset(&conf, 0, sizeof(conf)); + if (stl_parsebrd(&conf, stl_brdsp[i]) == 0) + continue; + if ((brdp = stl_allocbrd()) == NULL) + continue; + brdp->brdnr = i; + brdp->brdtype = conf.brdtype; + brdp->ioaddr1 = conf.ioaddr1; + brdp->ioaddr2 = conf.ioaddr2; + brdp->irq = conf.irq; + brdp->irqtype = conf.irqtype; + if (stl_brdinit(brdp)) + kfree(brdp); + else + stl_nrbrds = i + 1; + } retval = pci_register_driver(&stl_pcidriver); if (retval) -- 2.39.5