From 82ffb67164064752a56669511545316075b41e1d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 9 Sep 2005 16:25:54 +0200 Subject: [PATCH] [SCSI] fusion core changes for SAS support - various bits for SAS support from the LSI driver. - use the device private data for the fusion target private data. this should be using the midlayer target data framework, but we can't move over to that until fusion has been switched to the generic DV code - use target ID and channel from the fusion target private data, because those in scsi_device will be different for mptsas Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 516 +++++++++++++++++++++++++----- drivers/message/fusion/mptbase.h | 28 +- drivers/message/fusion/mptscsih.c | 15 +- 3 files changed, 472 insertions(+), 87 deletions(-) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index f517d0692d..14d62d96ca 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -141,7 +141,7 @@ static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag); static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag); -static int mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag); +static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag); static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag); static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag); static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag); @@ -152,6 +152,7 @@ static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); static int GetLanConfigPages(MPT_ADAPTER *ioc); static int GetFcPortPage0(MPT_ADAPTER *ioc, int portnum); static int GetIoUnitPage2(MPT_ADAPTER *ioc); +int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum); static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc); @@ -159,6 +160,8 @@ static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc); static void mpt_timer_expired(unsigned long data); static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch); static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp); +static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag); +static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init); #ifdef CONFIG_PROC_FS static int procmpt_summary_read(char *buf, char **start, off_t offset, @@ -509,6 +512,14 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply) pCfg->wait_done = 1; wake_up(&mpt_waitq); } + } else if (func == MPI_FUNCTION_SAS_IO_UNIT_CONTROL) { + /* we should be always getting a reply frame */ + memcpy(ioc->persist_reply_frame, reply, + min(MPT_DEFAULT_FRAME_SIZE, + 4*reply->u.reply.MsgLength)); + del_timer(&ioc->persist_timer); + ioc->persist_wait_done = 1; + wake_up(&mpt_waitq); } else { printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n", ioc->name, func); @@ -750,6 +761,7 @@ mpt_get_msg_frame(int handle, MPT_ADAPTER *ioc) mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR, u.frame.linkage.list); list_del(&mf->u.frame.linkage.list); + mf->u.frame.linkage.arg1 = 0; mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */ req_offset = (u8 *)mf - (u8 *)ioc->req_frames; /* u16! */ @@ -845,6 +857,7 @@ mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) /* Put Request back on FreeQ! */ spin_lock_irqsave(&ioc->FreeQlock, flags); + mf->u.frame.linkage.arg1 = 0xdeadbeaf; /* signature to know if this mf is freed */ list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); #ifdef MFCNT ioc->mfcnt--; @@ -971,10 +984,121 @@ mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, /* Make sure there are no doorbells */ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); - + return r; } +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mpt_host_page_access_control - provides mechanism for the host + * driver to control the IOC's Host Page Buffer access. + * @ioc: Pointer to MPT adapter structure + * @access_control_value: define bits below + * + * Access Control Value - bits[15:12] + * 0h Reserved + * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS } + * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS } + * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER } + * + * Returns 0 for success, non-zero for failure. + */ + +static int +mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag) +{ + int r = 0; + + /* return if in use */ + if (CHIPREG_READ32(&ioc->chip->Doorbell) + & MPI_DOORBELL_ACTIVE) + return -1; + + CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); + + CHIPREG_WRITE32(&ioc->chip->Doorbell, + ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL + <HostPageBuffer) { + + host_page_buffer_sz = + le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF; + + if(!host_page_buffer_sz) + return 0; /* fw doesn't need any host buffers */ + + /* spin till we get enough memory */ + while(host_page_buffer_sz > 0) { + + if((ioc->HostPageBuffer = pci_alloc_consistent( + ioc->pcidev, + host_page_buffer_sz, + &ioc->HostPageBuffer_dma)) != NULL) { + + dinitprintk((MYIOC_s_INFO_FMT + "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", + ioc->name, + ioc->HostPageBuffer, + ioc->HostPageBuffer_dma, + hst_page_buffer_sz)); + ioc->alloc_total += host_page_buffer_sz; + ioc->HostPageBuffer_sz = host_page_buffer_sz; + break; + } + + host_page_buffer_sz -= (4*1024); + } + } + + if(!ioc->HostPageBuffer) { + printk(MYIOC_s_ERR_FMT + "Failed to alloc memory for host_page_buffer!\n", + ioc->name); + return -999; + } + + psge = (char *)&ioc_init->HostPageBufferSGE; + flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT | + MPI_SGE_FLAGS_SYSTEM_ADDRESS | + MPI_SGE_FLAGS_32_BIT_ADDRESSING | + MPI_SGE_FLAGS_HOST_TO_IOC | + MPI_SGE_FLAGS_END_OF_BUFFER; + if (sizeof(dma_addr_t) == sizeof(u64)) { + flags_length |= MPI_SGE_FLAGS_64_BIT_ADDRESSING; + } + flags_length = flags_length << MPI_SGE_FLAGS_SHIFT; + flags_length |= ioc->HostPageBuffer_sz; + mpt_add_sge(psge, flags_length, ioc->HostPageBuffer_dma); + ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE; + +return 0; +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_verify_adapter - Given a unique IOC identifier, set pointer to @@ -1213,6 +1337,33 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->prod_name = "LSI53C1035"; ioc->bus_type = SCSI; } + else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) { + ioc->prod_name = "LSISAS1064"; + ioc->bus_type = SAS; + ioc->errata_flag_1064 = 1; + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066) { + ioc->prod_name = "LSISAS1066"; + ioc->bus_type = SAS; + ioc->errata_flag_1064 = 1; + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068) { + ioc->prod_name = "LSISAS1068"; + ioc->bus_type = SAS; + ioc->errata_flag_1064 = 1; + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064E) { + ioc->prod_name = "LSISAS1064E"; + ioc->bus_type = SAS; + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066E) { + ioc->prod_name = "LSISAS1066E"; + ioc->bus_type = SAS; + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068E) { + ioc->prod_name = "LSISAS1068E"; + ioc->bus_type = SAS; + } if (ioc->errata_flag_1064) pci_disable_io_access(pdev); @@ -1640,7 +1791,22 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) * and we try GetLanConfigPages again... */ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { - if (ioc->bus_type == FC) { + if (ioc->bus_type == SAS) { + + /* clear persistency table */ + if(ioc->facts.IOCExceptions & + MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) { + ret = mptbase_sas_persist_operation(ioc, + MPI_SAS_OP_CLEAR_NOT_PRESENT); + if(ret != 0) + return -1; + } + + /* Find IM volumes + */ + mpt_findImVolumes(ioc); + + } else if (ioc->bus_type == FC) { /* * Pre-fetch FC port WWN and stuff... * (FCPortPage0_t stuff) @@ -1783,7 +1949,7 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) if (ioc->cached_fw != NULL) { ddlprintk((KERN_INFO MYNAM ": mpt_adapter_disable: Pushing FW onto adapter\n")); - if ((ret = mpt_downloadboot(ioc, NO_SLEEP)) < 0) { + if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)ioc->cached_fw, NO_SLEEP)) < 0) { printk(KERN_WARNING MYNAM ": firmware downloadboot failure (%d)!\n", ret); } @@ -1852,6 +2018,23 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) kfree(ioc->ChainToChain); ioc->ChainToChain = NULL; + + if (ioc->HostPageBuffer != NULL) { + if((ret = mpt_host_page_access_control(ioc, + MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) { + printk(KERN_ERR MYNAM + ": %s: host page buffers free failed (%d)!\n", + __FUNCTION__, ret); + } + dexitprintk((KERN_INFO MYNAM ": %s HostPageBuffer free @ %p, sz=%d bytes\n", + ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz)); + pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz, + ioc->HostPageBuffer, + ioc->HostPageBuffer_dma); + ioc->HostPageBuffer = NULL; + ioc->HostPageBuffer_sz = 0; + ioc->alloc_total -= ioc->HostPageBuffer_sz; + } } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -2034,7 +2217,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) * Loop here waiting for IOC to come READY. */ ii = 0; - cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ + cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */ while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { if (ioc_state == MPI_IOC_STATE_OPERATIONAL) { @@ -2212,6 +2395,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) le32_to_cpu(facts->CurrentSenseBufferHighAddr); facts->CurReplyFrameSize = le16_to_cpu(facts->CurReplyFrameSize); + facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities); /* * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx @@ -2383,13 +2567,25 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n", ioc->name, ioc->upload_fw, ioc->facts.Flags)); - if (ioc->bus_type == FC) + if(ioc->bus_type == SAS) + ioc_init.MaxDevices = ioc->facts.MaxDevices; + else if(ioc->bus_type == FC) ioc_init.MaxDevices = MPT_MAX_FC_DEVICES; else ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES; - ioc_init.MaxBuses = MPT_MAX_BUS; - + dinitprintk((MYIOC_s_INFO_FMT "facts.MsgVersion=%x\n", + ioc->name, ioc->facts.MsgVersion)); + if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { + // set MsgVersion and HeaderVersion host driver was built with + ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION); + ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION); + + if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) { + ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE; + } else if(mpt_host_page_alloc(ioc, &ioc_init)) + return -99; + } ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */ if (sizeof(dma_addr_t) == sizeof(u64)) { @@ -2403,17 +2599,21 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) ioc_init.HostMfaHighAddr = cpu_to_le32(0); ioc_init.SenseBufferHighAddr = cpu_to_le32(0); } - + ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr; ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr; + ioc->facts.MaxDevices = ioc_init.MaxDevices; + ioc->facts.MaxBuses = ioc_init.MaxBuses; dhsprintk((MYIOC_s_INFO_FMT "Sending IOCInit (req @ %p)\n", ioc->name, &ioc_init)); r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init, sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag); - if (r != 0) + if (r != 0) { + printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r); return r; + } /* No need to byte swap the multibyte fields in the reply * since we don't even look at it's contents. @@ -2472,7 +2672,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) { PortEnable_t port_enable; MPIDefaultReply_t reply_buf; - int ii; + int rc; int req_sz; int reply_sz; @@ -2494,22 +2694,15 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) /* RAID FW may take a long time to enable */ - if (ioc->bus_type == FC) { - ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, - reply_sz, (u16*)&reply_buf, 65 /*seconds*/, sleepFlag); - } else { - ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, + if ( (ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) + > MPI_FW_HEADER_PID_PROD_TARGET_SCSI ) { + rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag); + } else { + rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, + reply_sz, (u16*)&reply_buf, 30 /*seconds*/, sleepFlag); } - - if (ii != 0) - return ii; - - /* We do not even look at the reply, so we need not - * swap the multi-byte fields. - */ - - return 0; + return rc; } /* @@ -2666,9 +2859,8 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) * <0 for fw upload failure. */ static int -mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) +mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) { - MpiFwHeader_t *pFwHeader; MpiExtImageHeader_t *pExtImage; u32 fwSize; u32 diag0val; @@ -2679,18 +2871,8 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) u32 load_addr; u32 ioc_state=0; - ddlprintk((MYIOC_s_INFO_FMT "downloadboot: fw size 0x%x, ioc FW Ptr %p\n", - ioc->name, ioc->facts.FWImageSize, ioc->cached_fw)); - - if ( ioc->facts.FWImageSize == 0 ) - return -1; - - if (ioc->cached_fw == NULL) - return -2; - - /* prevent a second downloadboot and memory free with alt_ioc */ - if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) - ioc->alt_ioc->cached_fw = NULL; + ddlprintk((MYIOC_s_INFO_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n", + ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader)); CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); @@ -2718,16 +2900,17 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) ioc->name, count)); break; } - /* wait 1 sec */ + /* wait .1 sec */ if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (1000); + msleep_interruptible (100); } else { - mdelay (1000); + mdelay (100); } } if ( count == 30 ) { - ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! Unable to RESET_ADAPTER diag0val=%x\n", + ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! " + "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n", ioc->name, diag0val)); return -3; } @@ -2742,7 +2925,6 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) /* Set the DiagRwEn and Disable ARM bits */ CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM)); - pFwHeader = (MpiFwHeader_t *) ioc->cached_fw; fwSize = (pFwHeader->ImageSize + 3)/4; ptrFw = (u32 *) pFwHeader; @@ -2792,19 +2974,38 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) /* Clear the internal flash bad bit - autoincrementing register, * so must do two writes. */ - CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); - diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); - diagRwData |= 0x4000000; - CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); - CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); + if (ioc->bus_type == SCSI) { + /* + * 1030 and 1035 H/W errata, workaround to access + * the ClearFlashBadSignatureBit + */ + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); + diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); + diagRwData |= 0x40000000; + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); + + } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ { + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); + CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | + MPI_DIAG_CLEAR_FLASH_BAD_SIG); + + /* wait 1 msec */ + if (sleepFlag == CAN_SLEEP) { + msleep_interruptible (1); + } else { + mdelay (1); + } + } if (ioc->errata_flag_1064) pci_disable_io_access(ioc->pcidev); diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); - ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, turning off PREVENT_IOC_BOOT, DISABLE_ARM\n", + ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, " + "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n", ioc->name, diag0val)); - diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM); + diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE); ddlprintk((MYIOC_s_INFO_FMT "downloadboot now diag0val=%x\n", ioc->name, diag0val)); CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); @@ -2812,10 +3013,23 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) /* Write 0xFF to reset the sequencer */ CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); + if (ioc->bus_type == SAS) { + ioc_state = mpt_GetIocState(ioc, 0); + if ( (GetIocFacts(ioc, sleepFlag, + MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) { + ddlprintk((MYIOC_s_INFO_FMT "GetIocFacts failed: IocState=%x\n", + ioc->name, ioc_state)); + return -EFAULT; + } + } + for (count=0; countname, count, ioc_state)); + if (ioc->bus_type == SAS) { + return 0; + } if ((SendIocInit(ioc, sleepFlag)) != 0) { ddlprintk((MYIOC_s_INFO_FMT "downloadboot: SendIocInit failed\n", ioc->name)); @@ -3049,12 +3263,13 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) /* wait 1 sec */ if (sleepFlag == CAN_SLEEP) { - ssleep(1); + msleep_interruptible (1000); } else { mdelay (1000); } } - if ((count = mpt_downloadboot(ioc, sleepFlag)) < 0) { + if ((count = mpt_downloadboot(ioc, + (MpiFwHeader_t *)ioc->cached_fw, sleepFlag)) < 0) { printk(KERN_WARNING MYNAM ": firmware downloadboot failure (%d)!\n", count); } @@ -3999,6 +4214,85 @@ GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) return rc; } +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptbase_sas_persist_operation - Perform operation on SAS Persitent Table + * @ioc: Pointer to MPT_ADAPTER structure + * @sas_address: 64bit SAS Address for operation. + * @target_id: specified target for operation + * @bus: specified bus for operation + * @persist_opcode: see below + * + * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for + * devices not currently present. + * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings + * + * NOTE: Don't use not this function during interrupt time. + * + * Returns: 0 for success, non-zero error + */ + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +int +mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) +{ + SasIoUnitControlRequest_t *sasIoUnitCntrReq; + SasIoUnitControlReply_t *sasIoUnitCntrReply; + MPT_FRAME_HDR *mf = NULL; + MPIHeader_t *mpi_hdr; + + + /* insure garbage is not sent to fw */ + switch(persist_opcode) { + + case MPI_SAS_OP_CLEAR_NOT_PRESENT: + case MPI_SAS_OP_CLEAR_ALL_PERSISTENT: + break; + + default: + return -1; + break; + } + + printk("%s: persist_opcode=%x\n",__FUNCTION__, persist_opcode); + + /* Get a MF for this command. + */ + if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { + printk("%s: no msg frames!\n",__FUNCTION__); + return -1; + } + + mpi_hdr = (MPIHeader_t *) mf; + sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf; + memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t)); + sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; + sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext; + sasIoUnitCntrReq->Operation = persist_opcode; + + init_timer(&ioc->persist_timer); + ioc->persist_timer.data = (unsigned long) ioc; + ioc->persist_timer.function = mpt_timer_expired; + ioc->persist_timer.expires = jiffies + HZ*10 /* 10 sec */; + ioc->persist_wait_done=0; + add_timer(&ioc->persist_timer); + mpt_put_msg_frame(mpt_base_index, ioc, mf); + wait_event(mpt_waitq, ioc->persist_wait_done); + + sasIoUnitCntrReply = + (SasIoUnitControlReply_t *)ioc->persist_reply_frame; + if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) { + printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", + __FUNCTION__, + sasIoUnitCntrReply->IOCStatus, + sasIoUnitCntrReply->IOCLogInfo); + return -1; + } + + printk("%s: success\n",__FUNCTION__); + return 0; +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * GetIoUnitPage2 - Retrieve BIOS version and boot order information. @@ -5366,8 +5660,8 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -static char * -EventDescriptionStr(u8 event, u32 evData0) +static void +EventDescriptionStr(u8 event, u32 evData0, char *evStr) { char *ds; @@ -5420,8 +5714,95 @@ EventDescriptionStr(u8 event, u32 evData0) ds = "Events(OFF) Change"; break; case MPI_EVENT_INTEGRATED_RAID: - ds = "Integrated Raid"; + { + u8 ReasonCode = (u8)(evData0 >> 16); + switch (ReasonCode) { + case MPI_EVENT_RAID_RC_VOLUME_CREATED : + ds = "Integrated Raid: Volume Created"; + break; + case MPI_EVENT_RAID_RC_VOLUME_DELETED : + ds = "Integrated Raid: Volume Deleted"; + break; + case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED : + ds = "Integrated Raid: Volume Settings Changed"; + break; + case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED : + ds = "Integrated Raid: Volume Status Changed"; + break; + case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED : + ds = "Integrated Raid: Volume Physdisk Changed"; + break; + case MPI_EVENT_RAID_RC_PHYSDISK_CREATED : + ds = "Integrated Raid: Physdisk Created"; + break; + case MPI_EVENT_RAID_RC_PHYSDISK_DELETED : + ds = "Integrated Raid: Physdisk Deleted"; + break; + case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED : + ds = "Integrated Raid: Physdisk Settings Changed"; + break; + case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED : + ds = "Integrated Raid: Physdisk Status Changed"; + break; + case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED : + ds = "Integrated Raid: Domain Validation Needed"; + break; + case MPI_EVENT_RAID_RC_SMART_DATA : + ds = "Integrated Raid; Smart Data"; + break; + case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED : + ds = "Integrated Raid: Replace Action Started"; + break; + default: + ds = "Integrated Raid"; break; + } + break; + } + case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: + ds = "SCSI Device Status Change"; + break; + case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: + { + u8 ReasonCode = (u8)(evData0 >> 16); + switch (ReasonCode) { + case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: + ds = "SAS Device Status Change: Added"; + break; + case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: + ds = "SAS Device Status Change: Deleted"; + break; + case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: + ds = "SAS Device Status Change: SMART Data"; + break; + case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: + ds = "SAS Device Status Change: No Persistancy Added"; + break; + default: + ds = "SAS Device Status Change: Unknown"; + break; + } + break; + } + case MPI_EVENT_ON_BUS_TIMER_EXPIRED: + ds = "Bus Timer Expired"; + break; + case MPI_EVENT_QUEUE_FULL: + ds = "Queue Full"; + break; + case MPI_EVENT_SAS_SES: + ds = "SAS SES Event"; + break; + case MPI_EVENT_PERSISTENT_TABLE_FULL: + ds = "Persistent Table Full"; + break; + case MPI_EVENT_SAS_PHY_LINK_STATUS: + ds = "SAS PHY Link Status"; + break; + case MPI_EVENT_SAS_DISCOVERY_ERROR: + ds = "SAS Discovery Error"; + break; + /* * MPT base "custom" events may be added here... */ @@ -5429,7 +5810,7 @@ EventDescriptionStr(u8 event, u32 evData0) ds = "Unknown"; break; } - return ds; + strcpy(evStr,ds); } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -5451,7 +5832,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply int ii; int r = 0; int handlers = 0; - char *evStr; + char evStr[100]; u8 event; /* @@ -5464,7 +5845,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply evData0 = le32_to_cpu(pEventReply->Data[0]); } - evStr = EventDescriptionStr(event, evData0); + EventDescriptionStr(event, evData0, evStr); devtprintk((MYIOC_s_INFO_FMT "MPT event (%s=%02Xh) detected!\n", ioc->name, evStr, @@ -5481,20 +5862,6 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply * Do general / base driver event processing */ switch(event) { - case MPI_EVENT_NONE: /* 00 */ - case MPI_EVENT_LOG_DATA: /* 01 */ - case MPI_EVENT_STATE_CHANGE: /* 02 */ - case MPI_EVENT_UNIT_ATTENTION: /* 03 */ - case MPI_EVENT_IOC_BUS_RESET: /* 04 */ - case MPI_EVENT_EXT_BUS_RESET: /* 05 */ - case MPI_EVENT_RESCAN: /* 06 */ - case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */ - case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */ - case MPI_EVENT_LOGOUT: /* 09 */ - case MPI_EVENT_INTEGRATED_RAID: /* 0B */ - case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: /* 0C */ - default: - break; case MPI_EVENT_EVENT_CHANGE: /* 0A */ if (evDataLen) { u8 evState = evData0 & 0xFF; @@ -5507,6 +5874,8 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply } } break; + default: + break; } /* @@ -5814,6 +6183,7 @@ EXPORT_SYMBOL(mpt_findImVolumes); EXPORT_SYMBOL(mpt_read_ioc_pg_3); EXPORT_SYMBOL(mpt_alloc_fw_memory); EXPORT_SYMBOL(mpt_free_fw_memory); +EXPORT_SYMBOL(mptbase_sas_persist_operation); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index f4827d9237..bbd21d74ce 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -65,6 +65,7 @@ #include "lsi/mpi_fc.h" /* Fibre Channel (lowlevel) support */ #include "lsi/mpi_targ.h" /* SCSI/FCP Target protcol support */ #include "lsi/mpi_tool.h" /* Tools support */ +#include "lsi/mpi_sas.h" /* SAS support */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -477,6 +478,14 @@ typedef struct _ScsiCfgData { u8 rsvd[1]; } ScsiCfgData; +typedef struct _SasCfgData { + u8 ptClear; /* 1 to automatically clear the + * persistent table. + * 0 to disable + * automatic clearing. + */ +}SasCfgData; + /* * Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS */ @@ -530,11 +539,15 @@ typedef struct _MPT_ADAPTER u8 *sense_buf_pool; dma_addr_t sense_buf_pool_dma; u32 sense_buf_low_dma; + u8 *HostPageBuffer; /* SAS - host page buffer support */ + u32 HostPageBuffer_sz; + dma_addr_t HostPageBuffer_dma; int mtrr_reg; struct pci_dev *pcidev; /* struct pci_dev pointer */ u8 __iomem *memmap; /* mmap address */ struct Scsi_Host *sh; /* Scsi Host pointer */ ScsiCfgData spi_data; /* Scsi config. data */ + SasCfgData sas_data; /* Sas config. data */ MPT_IOCTL *ioctl; /* ioctl data pointer */ struct proc_dir_entry *ioc_dentry; struct _MPT_ADAPTER *alt_ioc; /* ptr to 929 bound adapter port */ @@ -554,31 +567,35 @@ typedef struct _MPT_ADAPTER #else u32 mfcnt; #endif - u32 NB_for_64_byte_frame; + u32 NB_for_64_byte_frame; u32 hs_req[MPT_MAX_FRAME_SIZE/sizeof(u32)]; u16 hs_reply[MPT_MAX_FRAME_SIZE/sizeof(u16)]; IOCFactsReply_t facts; PortFactsReply_t pfacts[2]; FCPortPage0_t fc_port_page0[2]; + struct timer_list persist_timer; /* persist table timer */ + int persist_wait_done; /* persist completion flag */ + u8 persist_reply_frame[MPT_DEFAULT_FRAME_SIZE]; /* persist reply */ LANPage0_t lan_cnfg_page0; LANPage1_t lan_cnfg_page1; - /* + /* * Description: errata_flag_1064 * If a PCIX read occurs within 1 or 2 cycles after the chip receives * a split completion for a read data, an internal address pointer incorrectly * increments by 32 bytes */ - int errata_flag_1064; + int errata_flag_1064; u8 FirstWhoInit; u8 upload_fw; /* If set, do a fw upload */ u8 reload_fw; /* Force a FW Reload on next reset */ - u8 NBShiftFactor; /* NB Shift Factor based on Block Size (Facts) */ + u8 NBShiftFactor; /* NB Shift Factor based on Block Size (Facts) */ u8 pad1[4]; int DoneCtx; int TaskCtx; int InternalCtx; - struct list_head list; + struct list_head list; struct net_device *netdev; + struct list_head sas_topology; } MPT_ADAPTER; /* @@ -964,6 +981,7 @@ extern void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size); extern void mpt_free_fw_memory(MPT_ADAPTER *ioc); extern int mpt_findImVolumes(MPT_ADAPTER *ioc); extern int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); +extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); /* * Public data decl's... diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 4a003dc5fd..58b5fdee00 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1256,8 +1256,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) MPT_SCSI_HOST *hd; MPT_FRAME_HDR *mf; SCSIIORequest_t *pScsiReq; - VirtDevice *pTarget; - int target; + VirtDevice *pTarget = SCpnt->device->hostdata; int lun; u32 datalen; u32 scsictl; @@ -1267,12 +1266,9 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) int ii; hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata; - target = SCpnt->device->id; lun = SCpnt->device->lun; SCpnt->scsi_done = done; - pTarget = hd->Targets[target]; - dmfprintk((MYIOC_s_INFO_FMT "qcmd: SCpnt=%p, done()=%p\n", (hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt, done)); @@ -1315,7 +1311,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) /* Default to untagged. Once a target structure has been allocated, * use the Inquiry data to determine if device supports tagged. */ - if ( pTarget + if (pTarget && (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES) && (SCpnt->device->tagged_supported)) { scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ; @@ -1325,8 +1321,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) /* Use the above information to set up the message frame */ - pScsiReq->TargetID = (u8) target; - pScsiReq->Bus = (u8) SCpnt->device->channel; + pScsiReq->TargetID = (u8) pTarget->target_id; + pScsiReq->Bus = pTarget->bus_id; pScsiReq->ChainOffset = 0; pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; pScsiReq->CDBLength = SCpnt->cmd_len; @@ -1378,7 +1374,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION if (hd->ioc->bus_type == SCSI) { - int dvStatus = hd->ioc->spi_data.dvStatus[target]; + int dvStatus = hd->ioc->spi_data.dvStatus[pTarget->target_id]; int issueCmd = 1; if (dvStatus || hd->ioc->spi_data.forceDv) { @@ -2180,6 +2176,7 @@ mptscsih_slave_alloc(struct scsi_device *device) out: vdev->num_luns++; + device->hostdata = vdev; return 0; } -- 2.39.5