From 81cb727d29eda7692a03be035b7228b4c3f6b610 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 28 Jun 2008 12:49:20 -0300 Subject: [PATCH] V4L/DVB (8167): cx18: set correct audio inputs for tuner and line-in 2. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-audio.c | 15 +++++++++- drivers/media/video/cx18/cx18-av-audio.c | 12 ++++---- drivers/media/video/cx18/cx18-av-core.c | 3 +- drivers/media/video/cx18/cx18-av-core.h | 3 +- drivers/media/video/cx18/cx18-av-firmware.c | 2 +- drivers/media/video/cx18/cx18-cards.c | 32 ++++++++++----------- drivers/media/video/cx18/cx18-firmware.c | 3 -- drivers/media/video/cx18/cx18-mailbox.c | 1 + drivers/media/video/cx18/cx23418.h | 5 ++++ 9 files changed, 47 insertions(+), 29 deletions(-) diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c index 1adc404d95..6d5b94fc70 100644 --- a/drivers/media/video/cx18/cx18-audio.c +++ b/drivers/media/video/cx18/cx18-audio.c @@ -26,13 +26,17 @@ #include "cx18-cards.h" #include "cx18-audio.h" +#define CX18_AUDIO_ENABLE 0xc72014 + /* Selects the audio input and output according to the current settings. */ int cx18_audio_set_io(struct cx18 *cx) { struct v4l2_routing route; u32 audio_input; + u32 val; int mux_input; + int err; /* Determine which input to use */ if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { @@ -51,8 +55,17 @@ int cx18_audio_set_io(struct cx18 *cx) cx18_i2c_hw(cx, cx->card->hw_muxer, VIDIOC_INT_S_AUDIO_ROUTING, &route); route.input = audio_input; - return cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, + err = cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, VIDIOC_INT_S_AUDIO_ROUTING, &route); + if (err) + return err; + + val = read_reg(CX18_AUDIO_ENABLE) & ~0x30; + val |= (audio_input > CX18_AV_AUDIO_SERIAL2) ? 0x20 : + (audio_input << 4); + write_reg(val | 0xb00, CX18_AUDIO_ENABLE); + cx18_vapi(cx, CX18_APU_RESETAI, 1, 0); + return 0; } void cx18_audio_set_route(struct cx18 *cx, struct v4l2_routing *route) diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c index 2dc3a5dd17..c40a286de1 100644 --- a/drivers/media/video/cx18/cx18-av-audio.c +++ b/drivers/media/video/cx18/cx18-av-audio.c @@ -34,7 +34,7 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq) /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */ cx18_av_write(cx, 0x127, 0x50); - if (state->aud_input != CX18_AV_AUDIO_SERIAL) { + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { switch (freq) { case 32000: /* VID_PLL and AUX_PLL */ @@ -148,7 +148,7 @@ void cx18_av_audio_set_path(struct cx18 *cx) /* Mute everything to prevent the PFFT! */ cx18_av_write(cx, 0x8d3, 0x1f); - if (state->aud_input == CX18_AV_AUDIO_SERIAL) { + if (state->aud_input <= CX18_AV_AUDIO_SERIAL2) { /* Set Path1 to Serial Audio Input */ cx18_av_write4(cx, 0x8d0, 0x01011012); @@ -165,7 +165,7 @@ void cx18_av_audio_set_path(struct cx18 *cx) /* deassert soft reset */ cx18_av_and_or(cx, 0x810, ~0x1, 0x00); - if (state->aud_input != CX18_AV_AUDIO_SERIAL) { + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { /* When the microcontroller detects the * audio format, it will unmute the lines */ cx18_av_and_or(cx, 0x803, ~0x10, 0x10); @@ -271,7 +271,7 @@ static void set_mute(struct cx18 *cx, int mute) { struct cx18_av_state *state = &cx->av_state; - if (state->aud_input != CX18_AV_AUDIO_SERIAL) { + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { /* Must turn off microcontroller in order to mute sound. * Not sure if this is the best method, but it does work. * If the microcontroller is running, then it will undo any @@ -298,14 +298,14 @@ int cx18_av_audio(struct cx18 *cx, unsigned int cmd, void *arg) switch (cmd) { case VIDIOC_INT_AUDIO_CLOCK_FREQ: - if (state->aud_input != CX18_AV_AUDIO_SERIAL) { + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { cx18_av_and_or(cx, 0x803, ~0x10, 0); cx18_av_write(cx, 0x8d3, 0x1f); } cx18_av_and_or(cx, 0x810, ~0x1, 1); retval = set_audclk_freq(cx, *(u32 *)arg); cx18_av_and_or(cx, 0x810, ~0x1, 0); - if (state->aud_input != CX18_AV_AUDIO_SERIAL) + if (state->aud_input > CX18_AV_AUDIO_SERIAL2) cx18_av_and_or(cx, 0x803, ~0x10, 0x10); return retval; diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index cf98b2c445..3ccdf613bc 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -241,7 +241,8 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, } switch (aud_input) { - case CX18_AV_AUDIO_SERIAL: + case CX18_AV_AUDIO_SERIAL1: + case CX18_AV_AUDIO_SERIAL2: /* do nothing, use serial audio input */ break; case CX18_AV_AUDIO4: reg &= ~0x30; break; diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index 39f3c93971..b54239959a 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -62,7 +62,8 @@ enum cx18_av_video_input { enum cx18_av_audio_input { /* Audio inputs: serial or In4-In8 */ - CX18_AV_AUDIO_SERIAL, + CX18_AV_AUDIO_SERIAL1, + CX18_AV_AUDIO_SERIAL2, CX18_AV_AUDIO4 = 4, CX18_AV_AUDIO5, CX18_AV_AUDIO6, diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c index ab86dc71bf..834b924824 100644 --- a/drivers/media/video/cx18/cx18-av-firmware.c +++ b/drivers/media/video/cx18/cx18-av-firmware.c @@ -22,6 +22,7 @@ #include "cx18-driver.h" #include +#define CX18_AUDIO_ENABLE 0xc72014 #define FWFILE "v4l-cx23418-dig.fw" int cx18_av_loadfw(struct cx18 *cx) @@ -118,7 +119,6 @@ int cx18_av_loadfw(struct cx18 *cx) have a name in the spec. */ cx18_av_write4(cx, 0x09CC, 1); -#define CX18_AUDIO_ENABLE 0xc72014 v = read_reg(CX18_AUDIO_ENABLE); /* If bit 11 is 1 */ if (v & 0x800) diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 0b892aacab..bb45bcf68e 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -67,12 +67,12 @@ static const struct cx18_card cx18_card_hvr1600_esmt = { { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, { CX18_CARD_INPUT_LINE_IN1, - CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX18_AV_AUDIO_SERIAL, CS5345_IN_3 }, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO_SERIAL, CS5345_IN_4 }, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 }, .ddr = { /* ESMT M13S128324A-5B memory */ .chip_config = 0x003, @@ -112,12 +112,12 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, { CX18_CARD_INPUT_LINE_IN1, - CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX18_AV_AUDIO_SERIAL, CS5345_IN_3 }, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO_SERIAL, CS5345_IN_4 }, + CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 }, .ddr = { /* Samsung K4D263238G-VC33 memory */ .chip_config = 0x003, @@ -163,10 +163,10 @@ static const struct cx18_card cx18_card_h900 = { { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO8, 0 }, { CX18_CARD_INPUT_LINE_IN1, - CX18_AV_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL1, 0 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL1, 0 }, .tuners = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, @@ -211,11 +211,11 @@ static const struct cx18_card cx18_card_mpc718 = { { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { - { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, - { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 0 }, - { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 0 }, + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 0 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL1, 0 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, @@ -261,14 +261,14 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = { { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, }, .audio_inputs = { - { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 }, - { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 1 }, - { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 1 }, + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 }, }, .tuners = { { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 2 }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 2 }, .ddr = { /* MT 46V16M16 memory */ .chip_config = 0x50306, diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c index 2c280728dd..02453f0969 100644 --- a/drivers/media/video/cx18/cx18-firmware.c +++ b/drivers/media/video/cx18/cx18-firmware.c @@ -41,9 +41,6 @@ #define CX18_REG_BUS_TIMEOUT_EN 0xc72024 -#define CX18_AUDIO_ENABLE 0xc72014 -#define CX18_REG_BUS_TIMEOUT_EN 0xc72024 - #define CX18_FAST_CLOCK_PLL_INT 0xc78000 #define CX18_FAST_CLOCK_PLL_FRAC 0xc78004 #define CX18_FAST_CLOCK_PLL_POST 0xc78008 diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 2a5ccef918..93177514e8 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -81,6 +81,7 @@ static const struct cx18_api_info api_info[] = { API_ENTRY(CPU, CX18_CPU_GET_ENC_PTS, 0), API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK, 0), API_ENTRY(CPU, CX18_CPU_DE_SET_MDL, API_FAST), + API_ENTRY(CPU, CX18_APU_RESETAI, API_FAST), API_ENTRY(0, 0, 0), }; diff --git a/drivers/media/video/cx18/cx23418.h b/drivers/media/video/cx18/cx23418.h index 33f78da9db..e7ed053059 100644 --- a/drivers/media/video/cx18/cx23418.h +++ b/drivers/media/video/cx18/cx23418.h @@ -52,6 +52,11 @@ #define EPU_CMD_MASK_DEBUG (EPU_CMD_MASK | 0x000000) #define EPU_CMD_MASK_DE (EPU_CMD_MASK | 0x040000) +#define APU_CMD_MASK 0x10000000 +#define APU_CMD_MASK_ACK (APU_CMD_MASK | 0x80000000) + +#define CX18_APU_RESETAI (APU_CMD_MASK | 0x05) + /* Description: This command indicates that a Memory Descriptor List has been filled with the requested channel type IN[0] - Task handle. Handle of the task -- 2.39.5