From 80cc0c382db318de88577eff027d5c4097abef81 Mon Sep 17 00:00:00 2001 From: Ben Cahill Date: Thu, 29 Nov 2007 11:10:09 +0800 Subject: [PATCH] iwlwifi: add comments to RXON command and txpower formats Add comments to RXON command and txpower formats Signed-off-by: Ben Cahill Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- .../net/wireless/iwlwifi/iwl-3945-commands.h | 62 ++++++++--- .../net/wireless/iwlwifi/iwl-4965-commands.h | 104 +++++++++++++----- 2 files changed, 124 insertions(+), 42 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h index 3d3c7e3d37..4a8fc6878c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h @@ -124,7 +124,7 @@ enum { /* Bluetooth device coexistance config command */ REPLY_BT_CONFIG = 0x9b, - /* 4965 Statistics */ + /* Statistics */ REPLY_STATISTICS_CMD = 0x9c, STATISTICS_NOTIFICATION = 0x9d, @@ -140,7 +140,8 @@ enum { /****************************************************************************** * (0) - * Header + * Commonly used structures and definitions: + * Command header, txpower * *****************************************************************************/ @@ -183,6 +184,36 @@ struct iwl3945_cmd_header { u8 data[0]; } __attribute__ ((packed)); +/** + * struct iwl3945_tx_power + * + * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH + * + * Each entry contains two values: + * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained + * linear value that multiplies the output of the digital signal processor, + * before being sent to the analog radio. + * 2) Radio gain. This sets the analog gain of the radio Tx path. + * It is a coarser setting, and behaves in a logarithmic (dB) fashion. + * + * Driver obtains values from struct iwl3945_tx_power power_gain_table[][]. + */ +struct iwl3945_tx_power { + u8 tx_gain; /* gain for analog radio */ + u8 dsp_atten; /* gain for DSP */ +} __attribute__ ((packed)); + +/** + * struct iwl3945_power_per_rate + * + * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH + */ +struct iwl3945_power_per_rate { + u8 rate; /* plcp */ + struct iwl3945_tx_power tpc; + u8 reserved; +} __attribute__ ((packed)); + /****************************************************************************** * (0a) * Alive and Error Commands & Responses: @@ -328,8 +359,22 @@ enum { /* transfer to host non bssid beacons in associated state */ #define RXON_FILTER_BCON_AWARE_MSK __constant_cpu_to_le32(1 << 6) -/* +/** * REPLY_RXON = 0x10 (command, has simple generic response) + * + * RXON tunes the radio tuner to a service channel, and sets up a number + * of parameters that are used primarily for Rx, but also for Tx operations. + * + * NOTE: When tuning to a new channel, driver must set the + * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent + * info within the device, including the station tables, tx retry + * rate tables, and txpower tables. Driver must build a new station + * table and txpower table before transmitting anything on the RXON + * channel. + * + * NOTE: All RXONs wipe clean the internal txpower table. Driver must + * issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10), + * regardless of whether RXON_FILTER_ASSOC_MSK is set. */ struct iwl3945_rxon_cmd { u8 node_addr[6]; @@ -373,17 +418,6 @@ struct iwl3945_rxon_time_cmd { __le16 reserved; } __attribute__ ((packed)); -struct iwl3945_tx_power { - u8 tx_gain; /* gain for analog radio */ - u8 dsp_atten; /* gain for DSP */ -} __attribute__ ((packed)); - -struct iwl3945_power_per_rate { - u8 rate; /* plcp */ - struct iwl3945_tx_power tpc; - u8 reserved; -} __attribute__ ((packed)); - /* * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response) */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h index bde3aa018b..0813e3e3ef 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h @@ -123,7 +123,7 @@ enum { /* Bluetooth device coexistance config command */ REPLY_BT_CONFIG = 0x9b, - /* 4965 Statistics */ + /* Statistics */ REPLY_STATISTICS_CMD = 0x9c, STATISTICS_NOTIFICATION = 0x9d, @@ -147,7 +147,7 @@ enum { /****************************************************************************** * (0) * Commonly used structures and definitions: - * Command header, rate_n_flags + * Command header, rate_n_flags, txpower * *****************************************************************************/ @@ -273,6 +273,65 @@ struct iwl4965_cmd_header { #define RATE_MCS_ANT_AB_MSK 0xc000 +/** + * struct iwl4965_tx_power - txpower format used in REPLY_SCAN_CMD + * + * Scan uses only one transmitter, so only one analog/dsp gain pair is needed. + */ +struct iwl4965_tx_power { + u8 tx_gain; /* gain for analog radio */ + u8 dsp_atten; /* gain for DSP */ +} __attribute__ ((packed)); + +#define POWER_TABLE_NUM_ENTRIES 33 +#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32 +#define POWER_TABLE_CCK_ENTRY 32 + +/** + * union iwl4965_tx_power_dual_stream + * + * Host format used for REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH + * Use __le32 version (struct tx_power_dual_stream) when building command. + * + * Driver provides radio gain and DSP attenuation settings to device in pairs, + * one value for each transmitter chain. The first value is for transmitter A, + * second for transmitter B. + * + * For SISO bit rates, both values in a pair should be identical. + * For MIMO rates, one value may be different from the other, + * in order to balance the Tx output between the two transmitters. + * + * See more details in doc for TXPOWER in iwl-4965-hw.h. + */ +union iwl4965_tx_power_dual_stream { + struct { + u8 radio_tx_gain[2]; + u8 dsp_predis_atten[2]; + } s; + u32 dw; +}; + +/** + * struct tx_power_dual_stream + * + * Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH + * + * Same format as iwl_tx_power_dual_stream, but __le32 + */ +struct tx_power_dual_stream { + __le32 dw; +} __attribute__ ((packed)); + +/** + * struct iwl4965_tx_power_db + * + * Entire table within REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH + */ +struct iwl4965_tx_power_db { + struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES]; +} __attribute__ ((packed)); + + /****************************************************************************** * (0a) * Alive and Error Commands & Responses: @@ -501,8 +560,22 @@ enum { /* transfer to host non bssid beacons in associated state */ #define RXON_FILTER_BCON_AWARE_MSK __constant_cpu_to_le32(1 << 6) -/* +/** * REPLY_RXON = 0x10 (command, has simple generic response) + * + * RXON tunes the radio tuner to a service channel, and sets up a number + * of parameters that are used primarily for Rx, but also for Tx operations. + * + * NOTE: When tuning to a new channel, driver must set the + * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent + * info within the device, including the station tables, tx retry + * rate tables, and txpower tables. Driver must build a new station + * table and txpower table before transmitting anything on the RXON + * channel. + * + * NOTE: All RXONs wipe clean the internal txpower table. Driver must + * issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10), + * regardless of whether RXON_FILTER_ASSOC_MSK is set. */ struct iwl4965_rxon_cmd { u8 node_addr[6]; @@ -550,31 +623,6 @@ struct iwl4965_rxon_time_cmd { __le16 reserved; } __attribute__ ((packed)); -struct iwl4965_tx_power { - u8 tx_gain; /* gain for analog radio */ - u8 dsp_atten; /* gain for DSP */ -} __attribute__ ((packed)); - -#define POWER_TABLE_NUM_ENTRIES 33 -#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32 -#define POWER_TABLE_CCK_ENTRY 32 - -union iwl4965_tx_power_dual_stream { - struct { - u8 radio_tx_gain[2]; - u8 dsp_predis_atten[2]; - } s; - u32 dw; -}; - -struct tx_power_dual_stream { - __le32 dw; -} __attribute__ ((packed)); - -struct iwl4965_tx_power_db { - struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES]; -} __attribute__ ((packed)); - /* * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response) */ -- 2.39.5